Could not launch the Adobe stabilization server.

I am running After Effects Cs6 creative cloud on my MacBook pro with Retina Display, Mid 2012, with 8GB RAM and Mavericks as the OS. I have some shaky video (want to stabilize only 10 seconds of video) and I cannot get Warp Stabilization to work. When I tell it to analyze, it starts and says it's analyzing video, but after 5 minutes it times out and says that it could not launch the Adobe stabilization server. Why is this? I feel like my computer should easily be able to handle this. Thanks!

Hi garrettborden,
No other application should be blocking the process. It's usually TCP communication interrupted by either Firewall or other security software.
Do you mean the "Adobe Analysis Server?" If so, check these things. Mac OS X has a built in Firewall in System Preferences. Can you see if that is set to off?
If the Firewall is set to "OFF," and you still can't use Warp Stabilizer, others have solved their issues by doing the following:
Uninstalling and reinstalling After Effects. When uninstalling, please use the Adobe Cleaner Tool to make sure you get a fresh installation: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.htmlRestart the Mac after doing this.
Installing After Effects on a new user account, and run that user as an administrator. It sounds like you tried that and it worked for you, but is not ideal.
If you are still having trouble, please make a screenshot of the Activity Monitor just after you have applied a Warp Stabilizer effect. It would be helpful to see which processes are running, or not.
Thanks,
Kevin

Similar Messages

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding",

Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you

If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

Could not find the Adobe Content Viewer.

I have CS6 on my machine and when I try to preview a Folio on my desktop I get the prompt: An error occurred while generating folio preview. Could not find the Adobe Content Viewer.
I have Adobe Air installed. Does anyone have any recommendations for me?
thank you.
PS. I also have CS5 installed and I could not generate preview from CS5 either.

See this article to install it manually:
http://helpx.adobe.com/digital-publishing-suite/kb/manual-install-content-viewer.html

Could Not Contact the Software Update Server

I am trying to configure my clients so they can update releases of Jabber by clicking on "Check for Updates". I am getting the error, "Could not contact the software update server." I have verified the URL's in the XML files are correct and I can get to them directly from a browser.
Anyone have any ideas of what I am doing incorrectly?
jabber-config.xml
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Presence>
   <PresenceServerAddress>10.1.10.8</PresenceServerAddress>
   <PresenceServerDomain>app.leeent.net</PresenceServerDomain>
</Presence>
<Directory>
   <DirectoryServerType>EDI</DirectoryServerType>
   <ConnectionType>1</ConnectionType>
   <PrimaryServerName>10.1.4.42</PrimaryServerName>
   <ServerPort1>3268</ServerPort1>
   <SecondaryServerName>10.1.4.3</SecondaryServerName>
   <ServerPort2>3268</ServerPort2>
</Directory>
<Client>
    <UpdateUrl>http://leestl-oapp.stl.leeent.net/jabber/jabberupdate.xml</UpdateUrl>
</Client>
<Policies>
   <Disallowed_File_Transfer_Types>.exe;.msi;.rar;.zip;.mp3;.mp4</Disallowed_File_Transfer_Types>
</Policies>
<Options>
   <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
</Options>
</config>
jabberupdate.xml
<?xml version="1.0" encoding="windows-1250"?>
<JabberUpdate>
<LatestBuildNum>3271</LatestBuildNum>
<LatestVersion>9.2.2</LatestVersion>
<Message><![CDATA[<b>This is Jabber 9.2.2</b>]]></Message>
<DownloadURL>http://leestl-oapp.stl.leeent.net/jabber/CiscoJabberSetup-STL.msi</DownloadURL>
</JabberUpdate>

I figured out the problem. It was the UTF encoding. Should have stuck with UTF-8 but instead took what PSPAD gave me as a default.

8.3 causing issues with safari, "Safari could not open the page because server stopped responding"

Since my upgrade to 8.3 there are several issues with many apps when they are trying to download information.
When I go to Safari and open i.e. msn.com. it tries for over 60 seconds. then I get the error:
Safari could not open the page because server stopped responding.
I have a iPhone 6 plus with 113 gig and 65 gig available
This same issue is causing problems when downloading articles on facebook and instagram app.
We also noticed this same issue on Macbook Air, and iMac, iPad 2, and iPhone 5s.
I also have the Mac Pro without these issues but it is connected by ethernet instead of wireless.
Is wifried back and now plaguing all devices?
I selected mac because, I was tried of all the PC issues with new updates. It seems mac is now lowering its quality to that of PC.
We need a fix for this ASAP!

I have tried resetting my Iphone 6 Plus by holding both the off and select buttom. This did not help.

Safari could not open the page because server stopped responding on my IPAD3

As a Novice can some one please tell me, in detail, how to resolve ' safari could not open the page because server stopped responding' on my IPAD3

I am having the same issue. Its says that the server has stopped running. THis has gone on for three days straight. First time it fixed it by powering down the unit, the next time it worked resetting the network settings. Now its happened again and these two options do not work either. What do I do or what could be wrong??

Safari could not open the page because server stopped responding

safari could not open the page because server stopped responding

I am having the same issue. Its says that the server has stopped running. THis has gone on for three days straight. First time it fixed it by powering down the unit, the next time it worked resetting the network settings. Now its happened again and these two options do not work either. What do I do or what could be wrong??

Could not start the Oracle Forms Server

I am using Windows 2000 Professional
The Oracle Forms Server [Forms60Server] service failed to start due to the following error:
Access is denied.
Event ID: 7000
Source: Service Control Manager
Description: Could not start the Oracle Forms Server [Form60Server] service on a Local Computer.
Error 0005: Access is Denied

Description:
I Installed Oracle Forms6i and when i tried to run web test form I got this :
Event Type:     Information
Event Source:     Application Popup
Event Category:     None
Event ID:     26
Description:
Application popup: ifcgi60.exe - Unable To Locate DLL : The dynamic link library D2LA60.dll could not be found in the specified path C:\orant\tools\web60\cgi;.;C:\WINNT\System32;C:\WINNT\system;C:\WINNT;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem.
this missed file already exist in <Oracle Home>\Bin
directory, and if I copied it to the asked destination
it asks for more CORE40.dll and NLSRTL33.dll
and then those also copied then the screen disappears
Question : Why did this error occur, what went wrong
and how do I fix this problem
2)the other question is in Forms9iDS Version 9.0.2.7.0 I am getting this error
Event Type:     Error
Event Source:     Service Control Manager
Event Category:     None
Event ID:     7000
Description:
The OracleOraHome9iAgent service failed to start due to the following error:
Access is denied.
FRM-92060 :Failed to connect to the server
Bad machine specification :/forms90/190servlet:-1
Any Suggestion will be appreciated

MMC could not create the snap-in Server 2008 Enterprise

I have the following error in my Windows Server 2008
MMC could not create the snap-in. The snap-in might not have been installed correctly.
name: Server Manager
CLSID: FX:{18ea3f92-d6aa-41d9-a205-2023400c8fbb}
I have not been able to find a server that has the same files as listed in other references but none of those other servers have the
same issue:
"On
another Windows Server 2008 x64 or Windows Vista x64 computer, in
thec:\windows\servicing\packages folder, 6 KB948609
related files may exist. Please copy all of them from that computer to c:\windows\servicing\packages on
the problematic computer."
So any assistance would be great.
"If at first you don't succeed, get a bigger hammer."

I take that back... I can cut and paste:
Here is the error from the MMC:
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
   at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
   at System.Activator.CreateInstance(Type type, Boolean nonPublic)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at System.Activator.CreateInstance(String assemblyName, String typeName, Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, Evidence securityInfo, StackCrawlMark&
stackMark)
   at System.Activator.CreateInstance(String assemblyName, String typeName)
   at System.AppDomain.CreateInstanceAndUnwrap(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Internal.SnapInClient.CreateSnapIn(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Internal.ClassLibraryServices.Microsoft.ManagementConsole.Internal.IClassLibraryServices.CreateSnapIn(String assemblyName, String typeName)
   at Microsoft.ManagementConsole.Executive.SnapInInitializationOperation.OnStart()
   at Microsoft.ManagementConsole.Executive.RunningOperationsTable.EnqueueOperation(Operation operation)
   at Microsoft.ManagementConsole.Executive.StandAloneComponentData..ctor(SnapInRegistrationInfo info, Int32 bookkeepingId)
   at Microsoft.ManagementConsole.Advanced.FrameworkSnapInFactory.Microsoft.ManagementConsole.Advanced.ISnapInFactory.CreateSnapIn(Int32 bookkeepingId, String snapInKey, Object& snapIn)
"If at first you don't succeed, get a bigger hammer."

Safari could not open the page as server stopped responding ? what to do?

I have got an Ipad 2 . It was working fine but suddenly it stopped responding to wireless internet connectivity. When ever I am trying to browse on safari a message comes "SAFARI could not open the page because the server stopped responding"

Have you tried restarting or resetting your iPad?
Restart iPad: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
Reset iPad: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Ignore the "Slide to power off".

Could not Launch the Farm configuration wizard

I have installed SharePoint foundation 2010 on the Windows 2008 R2 Server with MSSql 2008 R2. The is not a domain controller and it is workgroup server.
Installation went through without any issues. Now I am facing problem in Launching Farm configuration wizard.
I am trying to launch the farm configuration wizard in two way
A.
Open internet explorer
Enter the sharepoint server address
Login with user name and password
In share Point central administrator web site, click on configuration wizard – it returns blank page.
B. Start - Programs - SharePoint 2010 Products - SharePoint 2010 Products Configuration Wizard
        In continue with configuration wizard.   After few steps of default values, it opens the internet explorer and ask for the user name and password.   After passing the user and password
credentials,
        System gives error as permission denied.
I have read lot of solutions for this issue and applied the same. Most the solutions suggested that the username should have some roles rights in sql and windows etc. I have given all possible rights to the user and trying to get this launching
wizard and there is no luck.
I would appreciate if you could help me to sort out this issues.
Thanks & Regards.
Noor.

Hi NoorulHuq,
Please try adding your shareadmin as farm administrator like ieDaddy said, and aslo here are two articles about the administrative and service accounts permission you can check,
http://technet.microsoft.com/en-us/library/ee662513(v=office.14).aspx
http://technet.microsoft.com/en-us/library/cc678863(v=office.14).aspx#Section2
Thanks
Daniel Yang
TechNet Community Support

Could not start the Oracle BI server service on local computer - error 1067

Hi Guys,
i've successfully installed the BI.however when i try to start the BI service, i get the above message.any ideas to fix this ?
Thanks
Jag

This error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
1.Go to Services (Admin Tools > Services)
2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
3.Go to Log On tab
4.If local system account is checked , un-check that option. Check "This Account" option
5.Give the user information for that machine(e.g domain\username)
6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
7.Confirm pwd and click Apply.
8.re-start the service.
This is what i did , and it worked.
good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
Thanks,
Ram

Could not launch Adobe Stabilization Server Error

Hey Guys, I'll take you down the road I've been traveling on for the past few hours.
- Installed CS5.5, everything runs smoothly for the first hour, then I close After Effects,
- Open it back up again, and receive the "Quicktime in not Installed, some plugin's will not work" So I research that fully, realize it isn't actually a problem and stop thinking about it. I also get an Output Module Error on Startup.
- I gather some clips together 1920x1080 23.976, normal 60D footage that I was testing to see stabilized, since it worked very well on my 7D footage (But I doubt its the footage that is causing the problem.
- When I drag, or go into effects and add Warp Stabilization to the clip, I get this error:
"After Effects error: Could not launch Adobe Stabilization Server. (514) ( 25 :: 101 )"
- And nothing will happen, can't analyze the footage or the error will pop up again.
My Mac:
MacbookPro 17inch
2.2Ghz Intel i7
4GB memory
Running it off of my 1tb 7200rpm external hard drive.
My Firewall is off (turned it off to test one of the Quicktime error solutions, I've had it both on and off, and both problems stay the same)
So throw me any bits of info, I know this has been out for exactly a day, but this sucks. I'm just glad that I'm testing it now, and not later
Thanks guys,
Zac

Sorry to hear you're having trouble with the new Warp Stabilizer. We did have a couple reports of this exact problem during beta testing, but were never able to get it to reproduce for us, or even for the beta testers that experienced the problem.
Some steps/questions:
0) Take a screenshot of all your running processes using Activity Monitor and Cmd-Shift-4.
1) What are your _exact_ steps to reproducing the problem (there are many ways to invoke the stabilizer, for example)?
2) Did you successfully use Warp Stabilizer before on this machine? (I see you already used it on 7D footage successfully)
3) Does it still happen after you quit & relaunch? (with no other apps running)
4) Does it still happen after you reboot & relaunch?
5) If it still happens, try turning Multiprocessing on in the prefs, click OK to dismiss the dialog, then bring it back up and turn Multiprocessing off, and OK again. Then stabilize. Does that help?
If you get it working, please repeat step 0, then post both pictures comparing before & after.
Thanks,
DaveS (Principal Scientist, Adobe Systems)

After Effects error: Could not launch Adobe Analysis Server (515) ( 25 :: 101) *POSSIBLE FIX*

Hi. Im New to the forums so sorry in advance if i do something incorrect
Since my Purchase of Adobe CS6, I was not able to use dynamic link, or the plugins that required you to connect to the Adobe Analysis Server (3d Tracker, Warp Stablizer ETC) It would always give me the error
After Effects error: Could not launch Adobe Analysis Server (515)
( 25 :: 101)
Or if i would use dynamiclink
The Importer created a generic error
Through hours and hours searching through the internet, and trying possible fixes, i found possible fixes that might help people with this error.
*Before attempting any of these fixes, make sure you reinstall CS6 Using the Adobe Cleaner*
This guide is for Windows OS Only.
If the error still presists, try these options
-If your windows account is not a administrator, Run Adobe After Affects CS6 As Administrator
-Disable your Anti-Virus and your Firewall
I know you have probably heard this over and over again, but this is mainly the cause of the problem. Some Anti-Viruses even when disabled, go into some sort of one eyed open mode, where it still monitors your computer ever so slightly, so you may want to uninstall the anti-virus. As for the firewall,
1) Go to your start menu search "Check Firewall Status"
2)Then to the left of the window, click Turn Windows Firewall on or off
3)Then tick "Turn of Windows Firewall" on BOTH Home or work network and Public Network.
-Close and Uninstall filtering and spyware programs such as Netnanny and Premiere Opinion. This might be using the TCP Ports that is needed for After effects, dynamic link and adobe analysis server to communicate
-Start up Adobe Analysis server Manually. This can be done by going to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files and running Adobe Analysis server.exe as Adminisrator, Then starting Premiere, After effects, etc.
-If the Adobe Cleaner didnt already, Clean your registry. This can be done with free applications such as CCleaner.
If none of those options work, I would suggest a full format and reinstall of windows.
I hope this would help people with this issue.

captain_astronaut wrote:
I'm running the latest version. Just installed yesterday.
You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
captain_astronaut wrote:
I'm on a Mac so I don't have anti-malware, or other security software running.
That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
I certainly hope you at least have your firewall running.
captain_astronaut wrote:
I tried launching Premiere yesterday and it crashed.
This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

When I launch After Effects I get a warning saying: Could not create the file'/Users/mayname/Library/Adobe/After effects/13.0/dummy'.

When I launch After Effects I get a warning saying: Could not create the file'/Users/mayname/Library/Adobe/After effects/13.0/dummy'.

See this:
fixing permissions problem that impedes start of Adobe applications

Could not launch the Adobe stabilization server.

Similar Messages

Maybe you are looking for