Could not load shockwave flash

Hello,
I have such pop ups in all sites except youtube : ,,could not load shockwave flash".
how to fix that issue?
I updated flash player from ur site, it is new version 15.
Please help.
I am use a Comodo dragon broswer.
Thanks in advanced

Please refer to our system requirements page for a list of supported browsers:
Adobe Flash Player | Tech specs
For issues with Flash in the Comodo browser, you'll need to ask Comodo.

Similar Messages

"Could not load Shockwave Flash" error not solved from common fix.

I am using Google Chrome as my web browser and I am getting the, "Could not load Shockwave Flash" error message. I have googled it and followed the common fix, however it does not fix anything. If I disable the plug-in then it prompts me to install Flash Player when I view videos and if I try to install Flash Player it tells me that I already have it installed, but it is disabled and to re-enable it. I've done about all I can think to do, please help?

You cannot:
-download
-install
-repair
-update
Flash Player for Chrome from here. Chrome uses a proprietary build called PepperFlash. It's modified by Google before they embed it and Adobe doesn't have downloads for it.
You can try the following:
1. Exit chrome, make sure it is not running
2. Using Windows explorer go to C:\users\[user name]\AppData\local\Google\Chrome\User data\Pepperflash
3. Delete the folders you see there
4. Start chrome again.
Notes:
[user name] is your logon name.
In order to access the AppData folder, you need to "Show Hidden Files and Folders" in your Folder Options.
If those steps fail, the ONLY way to repair it is to uninstall and reinstall Chrome.

Error msg "Could not load Shockwave Flash"

Have been using this for a while with no issues. Tried reinstall, no change.

It didn't work:
I disabled the first one, and closed the browser, then re-opened it, and still got the error.

Could not load Schockwave Flash

I have tried enabling, disabling, updating, deleting chaches, restarting, why isn't this working?
Windows 8 and Chrome.

1. Exit chrome, make sure it is not running
2. Using Windows explorer go to C:\users\[user name]\AppData\local\Google\Chrome\User data\Pepperflash
3. Delete the folders you see there
4. Start chrome again.
Notes:
[user name] is your logon name.
In order to access the AppData folder, you need to "Show Hidden Files and Folders" in your Folder Options.

Chromebook cannot load Shockwave Flash.

Why am I suddenly getting the message "Chromebook cannot load Shockwave Flash? There has been no problem since I started using Chromebook last January.

Chrome is something else. On chrome OS, when I try to load the local newspaper, I get the message "couldn't load plug-in" and a notice on the top of the screen "could not load Shockwave Flash". I go to my secondary e-mail account, yahoo, and I can pull up the newspaper with no difficulty -- a different format, but it's there.
Who knows what's going on?
Thanks again for your interest.

Installing Flash CS5.5 corrupted my CS5 Fla - Could not load scene into memory. Your document may be

I have a FLA that worked fine in CS5, I have copies of the file going back 6 months. Every file I open gives me this error: Could not load scene into memory. Your document may be damaged.
How could every fla I've backed up give the same error? They all worked fine in CS5. Does anyone know of a fix? Or do I have to go back to CS5?
Thanks!

I reinstalled Flash Pro CS5 and it opens up all my FLA's (of the same project) perfectly. But Flash Pro CS5.5 gives me this error: Could not load scene into memory. Your document may be damaged.
So is CS5.5 unusable?
cheeres.

Flash Pro CC saved fla project - "Could not load scene into memory. Your document may be damaged."

Hi all, I've been working on a project in Flash Professional CC in windows 7 that was started in a previous version of Flash Pro and occasionally after I've saved the project and tried to open it the next day I get the "Could not load scene into memory. Your document may be damaged." message and only a blank Scene 2 in the project. I've previously been reverting back to the old saved project file and starting over. Its wasted a lot of time so far.
I can still open the same exact project in CS6 on another older computer but not in CC. I can also save the fla in CS6, transfer it to the other computer and then it will work again (for now). This isn't going to be an option in the future as CS6 was a trial version that is on its last use today.
I've tried to create a new flash pro cc project and just copied and pasted the library and scene layout from the old project into the new project. This worked for a couple of saves/ opens but the error has happened again. I'm scared that now that I've reached the point in the project were my work in the animation/ visual side will start to be more intensive that I will continuosly have to worry about losing all of my work. I'm using a document class so the AS3 code hasn't been an issue thankfully. Any help would be appreciated.

Thanks for the reply Amy, that is essentially what I am doing already only I'm not using version control software I'm just managing it on my own since its a solo project, though I have been considerring using git anyway. It still doesn't explain why I can open and save the supposedly damaged project (according to CC) in CS6 and only then will it work again in CC. Also I'm not gettting a chance to save as a new version over and over for long. Its only a couple of days max, usually just over one day, and I've primarily been working on the code in Flash Builder with little functional change in the actual fla project. Its primarily changing movieclips instance names, which in this project is tedious and time consuming. Having to revert back to the older working version is exaclty what I'm trying to avoid. I shouldn't have to commit the project to a repository every little change that I make to the fla file.

Flash CS5 Could not load scene into memory. Your document may be damaged.

Hello everyone!
Just bought the new CS5 Flash and was eager to begin my first document. I opened a new document Saved As to begin and then setup my basic page with only one imported graphic. Hit Save and received an error message: Could not load scene into memory. Your document may be damaged. When I closed and reopened the document this same error appears twice in my Output Menu.
I have noticed other people with several of simular issues and am not sure where to start to find an answer. Any help is greatly appreciated.
Thanks in Advance,
Biddler1

Thought I'd add to this since I have a file with a similar problem. I'm carrying the files home to work on in the evening. I've noticed at work that when I update an image in the library flash shows me a path going all the way out to the root of the network share and then back to the file. The file is just one folder away. Maybe Flash has recorded an absolute path instead of a relative path to the asset.
At home, Flash can't find the asset at all since it's recorded a non-portable path.
The question is, if the asset has been imported to the project file, why is flash checking the original in the first place?

Damaged Flash CC files ("Could not load scene into memory.")

I just installed Creative Cloud the other day, and had the following problem immediately.
I create a brand new .FLA and import a few assets from another person's Illustrator CC file, then write some ActionScript for basic interactivity. I can work for hours with that file. But when I save, quit and reopen the file (either 2 seconds later or the next day), I get a warning that says "Could not load scene into memory. Your file may be damaged." The library is empty, no instances of symbols on the stage, nothing. I can't open the file with Flash CS6 or anything: it's shot. I repeated the process several times with brand new Flash files, but always get the same results. I even deleted everything and reinstalled and still got the same results.
I switched to using Flash CS6, but when I imported artwork from Illustrator CC, I was getting corrupted artwork and periodically I'd get an error that said something to the effect of "You can't import artwork from a newer version of Illustrator into Flash CS 5.5. (WTF? I'm in Flash CS6.)
Any ideas? I'm on a Mac, OS X 10.8.4. Thanks very much.

Hi Gregir ,
Is it possible for you to share the file or the illustrator assets with us? We can take a look and get back on it.
Can you check the size of the PublishSettings.xml file which would be present after unzipping the zip created from the fla renaming it as .zip.
Thanks and Regards,
Sudeshna Sarkar
Adobe Flash Professional Team

Firefox 33.1 does not load Adobe Flash Player 15.0.0.223

As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
By the way:
Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
Enjoy!

Please refrain from posting scattergun boilerplate suggestions.
Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it.

Missing/empty symbols, "Could not load scene into memory. Your document may be damaged." CS6

Hey folks,
we've been getting this problem a lot. We had it in Flash CS5.5 and still have it CS6.
We're animating a series in Flash and this problem keeps cropping up way to often, but seems totally random.
Basically I'll be working on a .fla saving regular versions through out the day, no problems. I'll close the file down. Then I (or someone else on a different computer) will open it up and I'll get the error msg "Could not load scene into memory. Your document may be damaged." Everything will be fine except for a few missing graphic symbols. Sometimes just the one, sometimes a whole bunch. So where the symbol should be on the stage, instead you get a small white square, but it still contains the animation information. So it will still move about the stage. If I bring in the same symbol from an old scene I can swap them out and the problem is fixed, (until it does it again on a totally different graphic symbol).
If i select the symbol in the library the preview is white/blank and i can't go into it to edit. When I select the symbol on the stage, the "instance of:" gives me a blank "_ _ _" in the properties tab. How ever if i right click show in library it does show me the correct (although broken as in blank) symbol in the library.
I havent been able to reproduce this problem on purpose but I'd say it happens in roughly one scene out of 10. Its seems to happen at random, I know there must be something in common but i havent figured out what. Its going on in heavy scenes (large library multipule characters), lite scenes (just the one character). Its not like it happens to the same symbol, different ones each time. Everything is local to the scene, all elements are created in flash. We are working across a network but as everything is local to the scene i don't see how that would be a problem. Also we don't have duplicate named symbols. It also won't necessarily affect something that has been changed since the last version. could be a background element thats been there, untouched since the first version of the scene.
One point on how we set up our scenes which may be relevant. Start with empty scene, copy and paste symbols from other scenes to populate. Save.
The problem could appear on say version 4 or version 36. Older versions are usually fine.
So to sum up. Flash file is fine when we save it, open it up again later and a symbol will have disappeared. It's happening far too often.
I know how to fix the problem, thats not what I'm asking. I need to know WHY its doing it so we can stop this from happening in the first place.
Phew! Thanks for reading this far. Any help would be highly appreciated.
Sander/

Can you elaborate on how you use the network? Are you working from FLA/XFLs stored on a machine across a network (and saving them across the network)? I had plenty of those issues and Adobe has always warned not to work across a network. I just fell into the habit of copying over what I need to work on locally, then updating the file servers at the end of the day. Nothing was corrupt after that.
Also lately in CS5.5 (not CS6 yet) I had noticed that I could change some graphics assets, close the document in OS X and open in Windows only to find freshly updated graphics reverted back. What's even more odd is if the OS X machine that made the changes opens it the changes are still made. This happens vice versa as well. My only solution on that was not to work cross-platform with other machines on a network unless absolutely necessary.

Design mode could not load ... It may be incompatible...:FB4 Beta 2 and Flex SDK 4.1

Hello,
ever since I upgraded to the latest nightly builds about two weeks ago (SDK 4.1) I get the error mentioned above, and the design mode of Flash Builder 4 Beta 2 doesn't work any more:
Design mode could not load he.enwipe.core.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
Design mode could not load PureMVC_AS3_MultiCore_1_0_5.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
and also all other "swc" inside my project that do not come directly from the SDK or Flash Builder.
Any ideas what could be the cause?

Hi,
Did you switch your projects build option to merge into code rather than have runtime libraries generated.
David.
[edit'] I really should sleep a bit more- I miss read the question, but you will probably need to break down your project to see what the issue is mxml by mxml, one thing is that any mxml headers need to halo name space renamed to mx.
as below -
xmlns:mx="library://ns.adobe.com/flex/mx"

Design mode could not load playerglobal.swc.

I'm getting this warning
Design mode could not load playerglobal.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
I installed Flash Builder 4 Beta 2
And added the
Player Global SWC
Create content using the new APIs available in Flash Player 10.1 using Adobe Flash Builder 4 or Adobe Flex Builder 3. Installation instructions are included within the ZIP file.
Download Player Global SWC (ZIP, 294 KB)
How do I eliminate this warning?
Thanks,
Don

Hi,
If you want to use the new fp 10.1 features I would recommend that you download the latest nightly build of the sdk, this includes features required for 10.1 and also has both both globalplayer swc's. You can then target then player 10.0.0 or 10.1.0 in the project settings.
Also make sure that the flashplayer 10.1 beta is correctly installed.
David.

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

According to this forum post from the time of the shutdown, it is only those directly affected.
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
Here is a list from that link
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium

"Could not load scene into memory. Your document may be damaged." Lost whole timeline.

Please help me - I have been working on a Flash CS6 file for a while now, and just got the message "Could not load scene into memory. Your document may be damaged." The file is not big, all it contains is 3 layers - one embedded video FLV file and 2 layers on top that only contain brushstrokes. The file is on my external hard-drive and now I get the message when I open it on either of my computers. I read feedback that I should re-link or re-import my assets, so I re-made the FLV file and imported it to replace the old one that it said couldn't be found. The problem is the timeline is completely empty. Even once I import the new video, the timline only has one "layer 1" with only one blank keyframe. Where is the rest of my work? I am good with backing up but was just away for a week and got a lot of work done so I couldn't back it up until I was back home... and obviously that isn't happening now.
Please help if you have any idea where my work has disappeared to.

Hi GregirArt,
Can you please check your PublishSettings.xml file whether is there any duplicate profile entries?
You can check the same by renaming your .fla to .zip and extract the zip file to open the PublishSettings.xml
If you find multiple duplicate profile entries then please remove all the duplicate entries from the file and rename the file back to .fla and see if that helps.
Thanks!
Mohan

Could not load shockwave flash

Similar Messages

Maybe you are looking for