Could not load the following distribution specification files
I am attempting to use LabWindows/CVI 9.0 to creat a distribution package. At some point in the process something breaks, and then I can make all the changes I want, but CVI will crash when I close it, so none of my changes to the .cds file will get written. The error on crash-exit is this:
"Unrecoverable Internal Error at 001b:104FB24C. LabWindows/CVI will be aborted."
and/or
"Panel, pop-up, or menu bar handle is invalid"
And often, when I re-open CVI, it deletes the .cds file and gives me this error:
"Could not load the following distribution specification files: xxx.cds"
Please advise,
I found that everything is fine with the PRJ, CWS, and CDS, *until* I add the automatic "Project Output (Project.exe)" in the "Files" tab of the "Edit Installer" dialog box.
As a work-around I have added the release .exe as a file in the project, and then I link that file in the "Files" tab.
Attachments:
Files_Tab.JPG 119 KB
Similar Messages
-
I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?
Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week. -
Multiple "slapd[46]: could not load the replica file" Errors
Hi,
We've got an OD master (10.4.8) that sporadically falls into a state where it reports the error "slapd[46]: could not load the replica file." many times over in the system log. It will start this with no warning and when everything is running just fine, but once it has started there errors build up until it is reporting them up to 20 times a second. Usually once it gets to this stage directory services start to suffer badly across the network and all connected servers. We usually have to reboot various servers at this point including the ODM in order to get services up and running again. After the reboots sometimes the problem will just disappear, sometimes it will just start building up again.
We only have one other replica (down from 4) which is on a separate subnet across a WAN. We managed to get rid of the problem for a while by getting rid of the replicas on the local subnet, but it just pops back up again for no apparent reason.
We attempted to install a new ODM with a brand spanking PW server a while ago and new replicas, but hit the same issue sometime into the install.
The only time I've ever seen an issue with this many errors being reported so often it turned out to be a network loop, but I know there is not one present now. I did wonder about a rogue device on the network causing issues but I'm not fixed on this.
Can anyone give me any ideas where to start looking for a resolution?
Cheers
DanStep 1: Download subinacl.msi from the link
http://go.microsoft.com/fwlink/?LinkId=23418 and install it.
Step 2: Download my modified version of reset.cmd from
http://gerger.com/o/assets/x/?id=22540 and save the file in 'C:\Program
Files\Windows Resource Kits\Tools'.
Step 3: Open Command Prompt as Administrator and type the following without
quotes (hit Enter):
'cd c:\program files\windows resource kits\tools'
Step 4: Now type 'reset.cmd' and hit Enter (without quotes)
You will see the Command Line Tool running for some seconds. The issue
should have been fixed and Quicktime should run again.
Enjoy! -
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]> -
Windows 7 Home Premium, SP1
64-bit
I just installed SQL Server 2012 express - Express with Advanced Services (contains the database engine, Express Tools, Reporting Services, and Full Text Search),
file name - SQLEXPRADV_x64_ENU.
Opening SQL Server Management Studio causes the error -
"Could not load the file or assembly 'Microsoft.VisualStudio.OLE.Interop,
Version=7.1.40304.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The
system cannot find the file specified."
Do I need to install another file? Did I download the wrong version?
Any suggestions? Thanks for any help.Hello,
The issue may occure when the installation of your SQL Server is not a complete or a successful one. Did you try to repair or reinstall the SQL Server Express? You can also try to install
Service Pack 1 for SQL Server 2012
to check if the issue presists.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
CS6 photoshop message 'could not load the fast core routines module because the file was not found'
my CS6 photoshop is giving me the message 'could not load the fast core routines module because the file was not found'. this started happening after i used a trial of photoshop CC and decided not to stay with it. my photoshop is part of my CS6 suite and i am only getting this message with photoshop, my ilustrator keeps working just fine..... does anyone know how to fix it? thanks.
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
Thanks for any help
OS = Windows Vista.CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
MULTIPROCESSOR SUPPORT NOT FOUND
SUCCESSFULLY REPAIRED - STEP BY STEP
I made the repair for Elements 5 on an XP version Operating System PC by doing this:
I went to....
Start / All Programs / Accessories / Windows Explorer
and selected.....
My Computer / C:
which is my drive with its operating system where Photoshop is installed.
I then clicked....
Documents and Settings
Then - in each - of the three icons I found.....
All Users, Default User, and Owner
I went into....
Application Data / Adobe / Photoshop Elements
In that last file I removed ALL the contents.... IN EACH !
After rebooting, my Photoshop Elements 5 started to work.
I think with research and all I invested five hours. May this save you 4 1/2.
I was paranoid and put the contents of each file into a new file I identified
clearly in case it I have to replace one of the parts out in the future.
I hope this is of help to some future reader.
Other comments here seem to indicate that this solution has
worked in version 4 and up and fixed early versions of Vista.
This appears to be a common problem after a drive repair or partitioning.
Why they can't just tell us this is a mystery to me.
-- Bon Courage! --
Ken -
Can't use brushes after re-install -Could not load the brushes because the file is not compatible wi
I have CS3 Web Premium on an Alienware Area 51 M12j 7700i laptop.
Recently I had to wipe the HD and reinstall the OS, and everything else.
Photoshop deactivated, installed and re-activated fine, but when I try to use any brushes(except the default ones), I get:
"Could not load the brushes because the file is not compatible with this version of Photoshop"
This is weird as they worked just fine before I had to redo everything...
Anyone know what's the cause?corrupted.. maybe... but if you read the post, they worked fine until the rebuild...
And it's not "a" file, it's "many, many" files, maybe 40 or so brush files. -
Admin tool could not load the essbase driver.Please check the configuration
Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AMUntil you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again. -
I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?
According to this forum post from the time of the shutdown, it is only those directly affected.
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
Here is a list from that link
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium -
Hi there, I'm facing the following error when deploying node.js application to azure websites. I have read enough articles which points me to install visual studio. I'm on a linux desktop and i'd like to use the git to deploy website. I tried changing to
.NET 3.5/4.5 in the config but no help there. I've enabled python 2.7 aswell I have added the following to the query string to the handler_mappings in the portal but it isn't working. How do i go about fixing the same?
PATH C:\Program Files\Microsoft Visual Studio 9.0\VC\vcpackages
remote: Using start-up script server.js from package.json.remote: Generated web.config.remote: The package.json file does not specify node.js engine version constraints.remote: The node.js application will run with the default node.js version 0.12.0.remote: ..................................remote: remote: > [email protected] install D:\home\site\wwwroot\node_modules\mariasqlremote: > node-gyp rebuildremote: remote: remote: child_process: customFds option is deprecated, use stdio instead.remote: D:\home\site\wwwroot\node_modules\mariasql>node "c:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\node-gyp-bin\\..\..\node_modules\node-gyp\bin\node-gyp.js" rebuild remote: Building the projects in this solution one at a time. To enable parallel build, please add the "/m" switch.remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! build error remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack Error: `msbuild` failed with exit code: 1remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at ChildProcess.onExit (c:\Program Files (x86)\npm\2.5.1\node_modules\npm\node_modules\node-gyp\lib\build.js:267:23)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at ChildProcess.emit (events.js:110:17)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:1067:12)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! System Windows_NT 6.2.9200remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! command "node" "c:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"remote: gyp ERR! cwd D:\home\site\wwwroot\node_modules\mariasqlremote: gyp ERR! node -v v0.12.0remote: gyp ERR! node-gyp -v v1.0.2remote: gyp ERR! not ok remote: npm ERR! Windows_NT 6.2.9200remote: npm ERR! argv "D:\\Program Files (x86)\\nodejs\\0.12.0\\node.exe" "D:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\bin\\npm-cli.js" "install" "--production"remote: npm ERR! node v0.12.0remote: npm ERR! npm v2.5.1remote: npm ERR! code ELIFECYCLEremote: remote: npm ERR! [email protected] install: `node-gyp rebuild`remote: npm ERR! Exit status 1remote: npm ERR! remote: npm ERR! Failed at the [email protected] install script 'node-gyp rebuild'.remote: npm ERR! This is most likely a problem with the mariasql package,remote: npm ERR! not with npm itself.remote: npm ERR! Tell the author that this fails on your system:remote: npm ERR! node-gyp rebuildremote: npm ERR! You can get their info via:remote: npm ERR! npm owner ls mariasqlremote: npm ERR! There is likely additional logging output above.remote: remote: Failed exitCode=1, command="D:\Program Files (x86)\nodejs\0.12.0\node.exe" "D:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\npm-cli.js" install --productionremote: npm ERR! Please include the following file with any support request:remote: An error has occurred during web site deployment.remote: npm ERR! D:\home\site\wwwroot\npm-debug.logremote: remote: Error - Changes committed to remote repository but deployment to website failedHello,
From your description, this issue seems to be related with azure development, i move it to the azure forum there are azrue experts will help you. The current forum is for .NET class libraries.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Azure Media Encoder could not load the preset Preset.xml
Hi, have a question about Processing Job on azure, when i processing video on localhost the porcessing is working fine,but when i create windows services and install on server it show's up this error
Error Code:ErrorProcessingTask , Error Message:Azure Media Encoder could not load the preset Preset.xml on source
282f62b9-ef50-4ef8-a8d7-f86ebd2819ff.wmv:File type isn't supported.
Can someone help me to find solution for this error.
i appriciate your's help.Media Services defines a set of encoding presets you can use when creating encoding jobs.
You can either use one of the task preset strings defined
here.
Here are examples that show you how to use the preset strings.
Or, you can create your own XML-based presets (using UTF-8 or UTF-16 encoding) that are based on pre-defined presets. You
can find topics that contain XML-based presets under
this node. Or, you can get the XML preset files from
here.
Once you are ready to load the custom preset, you can use the following .NET SDK code.
static public IAsset EncodeToAdaptiveBitrateMP4Set(IAsset inputAsset)
var encodingPreset = "H264 Adaptive Bitrate MP4 Set 720p";
IJob job = _context.Jobs.Create(String.Format("Encoding WMV {0} to {1}",
inputAsset.Name,
encodingPreset));
var mediaProcessors =
_context.MediaProcessors.Where(p => p.Name.Contains("Media Encoder")).ToList();
var latestMediaProcessor =
mediaProcessors.OrderBy(mp => new Version(mp.Version)).LastOrDefault();
string configuration = File.ReadAllText("H264 Adaptive Bitrate MP4 Set 720p.xml");
ITask encodeTask = job.Tasks.AddNew("Encoding", latestMediaProcessor, configuration, TaskOptions.None);
encodeTask.InputAssets.Add(inputAsset);
encodeTask.OutputAssets.AddNew(String.Format("{0} as {1}", inputAsset.Name, encodingPreset), AssetCreationOptions.None);
job.StateChanged += new EventHandler<JobStateChangedEventArgs>(JobStateChanged);
job.Submit();
job.GetExecutionProgressTask(CancellationToken.None).Wait();
return job.OutputMediaAssets[0];
Please let us know if using one of the preset strings or the custom preset XMLs is not working for you.
thank you,
Julia
This posting is provided "AS IS" with no warranties, and confers no rights. -
"Could not load the system tables" when installing the MAXDB DB instance
Hello,
We have an error when we are installing the MAXDB 7.5 for Netweaver 04's Unicode Kernel.
The central instance is installed, but when we launch the DB Server, in the step 14/25 Activating the DB, the follow error ocurrs.
"ERROR 2007-03-12 11:44:21
MDB-07048 Could not load the system tables. Check the files 'dbm.prt' and 'dbm.ins' in the run directory of the database (search fo
r "load_systab") or call the Support Center."
the file dbm.ins is not found, but the file dbm.prt have:
2007-03-12 11:44:14 0x00000a94 0 DBM command load_systab
2007-03-12 11:44:14 0x00000a94 ERR -24964 DBM ERR_EXECUTE: error in program execution
0x00000a94 ERR -24964 DBM 256,/sapdb/XIP/db/bin/x_python /sapdb/XIP/db/env/lsystab.py -R /sapdb/XIP/db
-d XIP -u SUPERDBA,*.
I search information in OSS, but we can't found solutions.
Best Regards, Alberto.Hello Alberto,
if you're an SAP customer, can you open a message about this error, and enter a service connection into the MAXDB server?
Thanks,
Ashwath -
Web Logic 10.3.6 (64bit) - Could not load the sitemesh filter and library
Installed Web Logic 10.3.3 (32bit) and Java JDK 1.6.0_21 (32bit) in a customer's server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed with header and side menu, it is just displayed with a blank background. Refer to the below "ERROR LOG", found the application could not load the sitemesh filter and library properly. We are using sitemesh-2.3.jar.
Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu.
Please assist on this issue. Thanks.
Below is the sitemesh that is declared and configured.
WEB-INF/web.xml
<filter>
<filter-name>sitemesh</filter-name>
<filter-class>com.opensymphony.module.sitemesh.filter.PageFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>sitemesh</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
<dispatcher>INCLUDE</dispatcher>
</filter-mapping>
WEB-INF/decorators.xml
<decorators defaultdir="/template/decorators">
<decorator name="plain" page="plain.jsp"/>
<decorator name="printable" page="printable.jsp"/>
<decorator name="standard" page="page_template_std.jsp">
<pattern>/*.jsp</pattern>
</decorator>
<excludes>
<pattern>/include/*</pattern>
<pattern>/js/*</pattern>
<pattern>/Login.jsp*</pattern>
</excludes>
</decorators>
WEB-INF/sitemesh.xml
<sitemesh>
<property name="decorators-file" value="/WEB-INF/decorators.xml"/>
<excludes file="${decorators-file}"/>
<page-parsers>
<parser content-type="text/html"
class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
<parser content-type="text/html;charset=ISO-8859-1"
class="com.opensymphony.module.sitemesh.parser.HTMLPageParser" />
</page-parsers>
<decorator-mappers>
<mapper class="com.opensymphony.module.sitemesh.mapper.PageDecoratorMapper">
<param name="property.1" value="meta.decorator" />
<param name="property.2" value="decorator" />
</mapper>
<mapper class="com.opensymphony.module.sitemesh.mapper.FrameSetDecoratorMapper">
</mapper>
<mapper class="com.opensymphony.module.sitemesh.mapper.AgentDecoratorMapper">
<param name="match.MSIE" value="ie" />
<param name="match.Mozilla [" value="ns" />
<param name="match.Opera" value="opera" />
<param name="match.Lynx" value="lynx" />
</mapper>
<mapper class="com.opensymphony.module.sitemesh.mapper.PrintableDecoratorMapper">
<param name="decorator" value="printable" />
<param name="parameter.name" value="printable" />
<param name="parameter.value" value="true" />
</mapper>
<mapper class="com.opensymphony.module.sitemesh.mapper.RobotDecoratorMapper">
<param name="decorator" value="robot" />
</mapper>
<mapper class="com.opensymphony.module.sitemesh.mapper.ParameterDecoratorMapper">
<param name="decorator.parameter" value="decorator" />
</mapper>
<mapper class="com.opensymphony.module.sitemesh.mapper.FileDecoratorMapper">
</mapper>
<mapper class="com.opensymphony.module.sitemesh.mapper.ConfigDecoratorMapper">
<param name="config" value="/WEB-INF/decorators.xml" />
</mapper>
</decorator-mappers>
</sitemesh>
ERROR LOG
####<May 8, 2012 5:38:49 PM SGT> <Error> <HTTP> <BHQKPK10060> <cms_cimbmy> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1336469929804> <BEA-101165> <Could not load user defined filter in web.xml: com.opensymphony.module.sitemesh.filter.PageFilter.
com.opensymphony.module.sitemesh.factory.FactoryException: Cannot construct Factory : com.opensymphony.module.sitemesh.factory.DefaultFactory: java.lang.reflect.InvocationTargetException
at com.opensymphony.module.sitemesh.Factory.getInstance(Factory.java:50)
at com.opensymphony.module.sitemesh.filter.PageFilter.init(PageFilter.java:87)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)Do you see any further nested exceptions OR errors in the log file.
Considering that the same WLS-JDK combination works on one machine and does not work on another machine, it indicates an environmental issue.
"However installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) on that same server. The web page cannot be displayed....
Have tried installed Web Logic 10.3.6 (64bit) and Java JDK 1.6.0_31 (64bit) in a test server (Windows Server 2008 R2 and 64-bit Operating System). The web page can be displayed with header and side menu."
I am suspecting if it has to do anything with the native libraries being loaded JAVA_LIB_PATH.
Please review the server log file again for identifying differences in LIB_PATH or PATH or any messages saying "Unable to load native.. performance pack.."
Arun -
PSE 6 "Could not load the styles b/c of a program error
This is an error that evolved from the "This styles file is bad or corrupt.
Found a folder accidentally downloaded into Styles area and removed it, checked every other file in there, all good, rebooted. Now PSE has a new error "Could not load the styles because of a program error." Any more help?I posted this on your other thread...
Yeah, it's the bit I deleted but wanted to find the reference before posting.
Navigate to the MediaDatabase.db3 file and rename it...add a ~to the front of the filename or name it something like MediaDatabase.db3.TMP. It will take several minutes to rebuild...may take 5 - 10 minutes so be patient.
Location:
XP:
C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\6.0\Locale\en_US
Vista:
C:\Application Data\Adobe\Photoshop Elements\6.0\Locale\en_US
Maybe you are looking for
-
Accounting document created after foreign currency valuation
Hi SAP Gurus, Please help on below queries: 1. Is it correct that Accounting document is automatically created when foreign currency valuation (F.05) was run and 'Reverse Posting' was ticked? Does it mean that two document will be created; one is fo
-
Playing music from itunes store on creative produ
hi all, my 2nd ipod has just broken, no surprises there, so i think my relationship with apple is well and truly over. i have bought some music from the itunes store which is in "protected AAC" format, with file type ".m4p". does anyone know if this
-
I cant authorize my computer to itunes help?
i cant authorize my computer to itunes help?
-
Creating a book in 5.5" x 8.5"
I'd like to create a book in CS3 that uses regular size paper, in landscape format, folded, so that the finished book is 5.5"wide x 8.5 tall." I made all my new documents (chapters) and then put them in a book. The problem is getting it to print righ
-
CS 4 InDesign Page sizing tool
I found a post about this a week ago but lost it. CS 4 got rid of the easy page sizing tool so I could click on 100% or 75% or whatever and easily shift sizes of my pages in the work area. Apparently there is some new (application) tool on the tool b