Could not locate oraks.jks
Hi everyone, where can i find the oraks.jks key? It doesn't seems to be in my <jdeveloper_home>\j2ee\home\config
Hi, I need to find this file as well. wheere is it? i can´t find it.
Another cuestion is: How we could generate a keypar + x509v3 certificate, just importing this certificate to the keystore? I need this to secure a web service with jdeveloper.
Thanks in advance
Similar Messages
-
Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.
The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list. -
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
Reinstallation message: Could not locate Resources file in Configuration folder
I have new computer. Was running XP on old computer for CS4 Web Premium. Uninstalled from XP. Can't install on new machine with Windows 7. Getting error: Could not locate the Resouirces file in Configuration folder for Dreamweaver (and all other programs in Web Premium). Tried reinstalling times, no luck. Help please.
C ShawDo you receive this error message during the install process? I would recommend reviewing your installation log files. You can locate steps on how to accomplish this at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.
-
Need Help! "Could not locate the resource file in the Configuration folder."
I had just purchased and installed Adobe Crerative Design Suite last night. Every program works except Dreamweaver, which gives me the error message:"Could not locate the resource file in the Configuration folder. This File is required to run Dreamweaver. Please reinstall the application". I am suspicious because the was a previous version of Dreamweaver on the computer before this installation, but I unistalled it. I do not understand why I get this message. Is there a file somewhere that is missing or at faut. How can I remedy this? Thanks
~ToddNadia,
Your posted resources worked for me. Thank you! After many attempts (to include Adobe's overseas call canter) to resolve the same installation and run errors, I used your suggested steps and I finally have a clean and running install. I did have to take a few extra steps;
First I downloaded both Cleaning scripts. For CS4 & CS3.
Next I downloaded Windows installer/cleaner. I have Windows Vista Home Premium and that is a required installed program to run Adobe's cleaning script.
Once I was sure I had all the programs/scripts I needed (per your instructions and the instructions found on the Cleaning scripts site) I disconnected my computer from the Internet.
Then I disabled all running programs especially all Anti-virus and firewall programs and any others that have calls of any kind: i.e. Boinc (Seti), Skype, email programs (Windows Live Mail), etc.
Next I uninstalled all CS4 products and even though I was told that Macromedia Studio MX 2004 can stay installed (read that on one site and the overseas Tech also reinforced that information) I uninstalled MX 2004.
I then rebooted and installed the Windows installer/cleaner program and ran the Adobe CS4 cleaner script twice.
After another reboot I installed Dreamweaver CS4 first, rebooted (can't reboot enough with Windows!) and, yes you guessed it, rebooted.
I then attempted to open Dreamweaver CS4 and for the first time it ran without the error!
I then installed Adobe Ps CS4 and rebooted and that work for the first time as well.
I can't say for sure if Macromedia Studio MX 2004 caused the install errors on the Adobe products but without it and ALL that uninstalling and rebooting and running cleaning scripts and installing and rebooting, Adobe finally felt my computer was clean enough to call it home and work.
Thank you again for your information and I suggest if anyone else finds their way here that they follow your instructions to the letter. Takes a long time but a proper and clean install will be the result. -
"Could not locate the Resources file in the Configuration folder"
While opening DW cs5 on my iMac OS X 10.7.5 a window came up that says: "Could not locate the Resources file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application."
After downloading and reinstalling Adobe Creative Suite CS5 yesterday per the instruction of Adobe tech support, the application still had the same message when I attempt to open it. Not sure where else to turn. Please advise. ThanksSee if this previous thread regarding the same issue will help:
http://forums.adobe.com/message/2274699#2274699
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap -
Getting error 'could not locate ASM instance' when make copy of ASM VM
Hi everyone,
I make virtual machine of OEL 5.7 with oracle 10.2.0.1 and successfully configured ASM instance. I am using vmware workstation.
Now when I make copy of this virtual machine and startup database, then I get the below error:
[oracle@oelinux ~]$ export ORACLE_SID=asmdb
[oracle@oelinux ~]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Sep 29 01:10:26 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ASMGROUP/asmdb/spfileasmdb.ora'
*ORA-17503: ksfdopn:2 Failed to open file +ASMGROUP/asmdb/spfileasmdb.ora*
ORA-15077: could not locate ASM instance serving a required diskgroup
So how can i solve this problem??
Note: I copy this VM using both copy/paste and clone option, but get this error both times.
Regards,
Khurram BhattiEdStevens wrote:
Khurram Shehzad wrote:
I add 3 SCSI vmware disks. and then use them as a raw device. no ASMLib is used.
I refer below tutorial
[http://www.oracle-base.com/articles/10g/asm-using-asmlib-and-raw-devices.php]
That tutorial picks up after you created the disks.
How did you create the virtual disks attatched to your vm? What are its properties - from VMWorksation's perspective.
How did you create the "copy" of the vm?
It depends on how you actually created the disks, at the vm level, not the partitioning and formatting at the vm's OS level. I've used Tim's tutorials myself on some other ASM related projects, and he typically has you create the ASM disks as 'sharable', which would mean they would not copy necessarily copy with the vm. I've not played around the with variants much, but I'm pretty sure what you are seeing is a result of either the way the disk was created in the original vm, or the way you made the copy of the vm, or both.
Take a look at the machine properties of the two vms in the VMWorkstation control panel, looking at the HDD definitions. Compare and contrast.Hi EdStevens,
My problem resolved with below steps. Thanks fro your replies.
export ORACLE_SID=+ASM
sqlplus sys as sysdba
Connected to an idle instance.
SQL> startup mount
SQL> alter system register;
SQL> exit
[oracle@oelinux ~]$ export ORACLE_SID=asmdb
[oracle@oelinux ~]$ sqlplus sys as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Regards,
Khurram -
I'm getting the following exception when executing logic/queries around JPA entity classes:
{color:#333399}nested exception is: <1.0.0 fatal user error> org.apache.openjpa.persistence.ArgumentException: Could not locate metadata for the class using alias "MyClass". This could mean that the OpenJPA enhancer or load-time weaver was not run on the type whose alias is "MyClass". Registered alias mappings: "{MyClass=null}"{color}
I get this exception on occassion. It is intermitent and i can't seem to reproduce it consistently.
I'm using the following:
WebLogic: 10
KODO: 4.1.3.1 bundled with WL10 which in turn uses OpenJPA 1.0.0
In other forums on the net they have suggested explicitly adding the classes to the persistence.xml file ( i've done this )
They have also stated to run the openjpa enhancer on the code before deployment to WL ( done this too!)
One last step that i have yet to attempt is to load the class within the code before use ( haven't tried this as it seems so hackish)
Any other thoughts? ANyone else experience this?
ThanksWe are having the same issue.. Anybody knows how to deal with this problem?
-
BEA-141230 Could Not locate descriptor file for System Resource: DS name
Guys,
When I start the Admin and Managed server ..I get below warning message.
*<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>*
I know that weblogic server is unable to locatie datasource1.xml file at <SOA_HOME>/user_projects/domains/base_domain/config/jdbc
Is there any way to to get rid off from this error? I tried to delete datasource from weblogic Admin console, but get below error:
java.lang.NullPointerException
All changes have been activated. No restarts are necessary.
Errors were encountered while performing this delete operation.
Thanks,
AbAre you starting servers with the root user? make sure that using whichever user you are starting server, it has full access on MW_Home and it's sub-directories. You may consider raising a support SR.
Regards,
Anuj -
ORA-15077: could not locate ASM instance serving a required diskgroup
My cluster is gone...
due to restart of the network, the cluster fenced node2 from my configuration. Since the evicting, the cluster is not starting any more.
ocrcheck
PROT-602: Failed to retrieve data from the cluster registry
PROC-26: Error while accessing the physical storage
ORA-15077: could not locate ASM instance serving a required diskgroup
The OCR Disks are within ASM.
Oracleasm does see the disks
crsctl query css votedisk is also giving the correct information about the votingsdisks which are also in the same OCR diskgroup
crsctl query css votedisk
## STATE File Universal Id File Name Disk group
1. ONLINE 0eb6aaa85e5c4fd6bf9d0481cfd7d517 (ORCL:VOTE1) [OCR]
2. ONLINE 5a66449fbada4f34bf0c3be4574f03bc (ORCL:VOTE2) [OCR]
3. ONLINE 76ad295ebc054f07bfea124fb08da432 (ORCL:VOTE3) [OCR]
Located 3 voting disk(s).
Any ideas why the cluster is not starting anymore ? I am afraid of restarting node 1...
chrisReally would help to know what operating system you are using...
When you set up the disks for use with ASM, did you stamp them with ASMLIB? If not, did you configure device persistance with udev? Without using one of these methods, the disk identification can change when a node is restarted, and ASM is then unable to locate the disks. -
ISE Could not locate Network Device or AAA Client
When authenticating using 802.1x and MAB, I recieve an authentication failure with the error 11007(Could not locate Network Device or AAA Client). The root cause that ISE spits back at me is "Could not find the network device or the AAA Client while accessing NAS by IP during authentication." I did pretty much everything by the book except instead of using a loopback interface I used a vlan with a defined ip address. Could this be causing the problem?
Here is the config of the port that I'm testing on:
interface GigabitEthernet1/0/9
switchport access vlan 9
switchport mode access
switchport voice vlan 8
ip access-group ACL-ALLOW in
srr-queue bandwidth share 1 30 35 5
queue-set 2
priority-queue out
authentication event fail action next-method
authentication event server dead action reinitialize vlan 4
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication violation restrict
mab
mls qos trust device cisco-phone
mls qos trust cos
dot1x pae authenticator
dot1x timeout tx-period 10
auto qos voip cisco-phone
spanning-tree portfast
service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
endI can ping both the vlan and the endpoint from the ISE. As far as allowing ISE to speak snmp and RADIUS to the NAD, I have enabled it on the NAD config inside the ISE. I have also double checked the snmp and radius shared passwords.
I have gotten MAB authentication to work but I am still getting the same error for dot1x authentication. Here are some of the configs on the switch.
aaa new-model
aaa authentication dot1x default group radius
aaa authentication dot1x defualt group radius
aaa authentication dot1x group group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
aaa session-id common
ip radius source-interface TenGigabitEthernet1/0/1
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server host 10.10.10.47 auth-port 1812 acct-port 1813 test username test key 7 097940581F5412162B464D
radius-server vsa send accounting
radius-server vsa send authentication
dot1x system-auth-control
authentication order dot1x mab
authentication priority dot1x mab
dot1x pae authenticator
dot1x timeout tx-period 10 -
Error 10 Could not locate resource
I tried to auto download the JRE using the JREInstaller and the DownloadServlet (sample in jdk 1.5) from a local server. I got the error 10 Could not locate resource.
<j2se version="1.5.0*" href="http://127.0.0.1:8080/Web-Test2/install/javaws-1_0_1-j2re-1_5_0-windows-i586.jnlp"/>If I only take <j2se version="1.5.0*" href="http://127.0.0.1:8080/Web-Test2/install"/>, I will get an error: "Missing version field in response from server when accessing resource"
Any idea?The request made by java web start to download the jre is a using the extension protocol (version protocol) see the jnlp spec at:
http://jcp.org/aboutJava/communityprocess/mrel/jsr056/index.html
basically what this means is that you need to be running a servlet or jsp page on the target that implements the version protocol. see:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/downloadservletguide.html
I don''t know what you have at the target address of the jre:
javaws-1_0_1-j2re-1_5_0-windows-i586.jnlp
but you need servlet running at http://127.0.0.1:8080/Web-Test2/install to implement the version protocol.
/Andy -
JSP Registry could not locate runtime property file
At runtime, my JSP is throwing an exception claiming to be not able to find the property
file. I have found the exact property file in the jar located on the server. I've
tried extracting it and placing it in different places and adding the file and directory
to the WebLogic classpath. I'm not sure what else to try.
Here's the exception:
Loading from CLASSPATH cat_test4_cat_pkg_Cat_pkgModule.properties
java.lang.RuntimeException: JSP Registry could not locate runtime property file:
cat_test4_cat_pkg_Cat_pkgModule.properties
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
Thanks.
When you generate a webapp or use the JSP element wizard , a property file is created for you that contains some startup parameters. This file needs to be available in the classpath. This errors comes up becuase the file is not avalable in the classpath.
-
LABVIEW.LIB could not locate "RTsetCleanupProc"
Hi,
I am trying to get some feedback on a random error that I am getting when
running Labview on Windows XP. In my application I am performing data
acquisition with an M-series Daq device while at the same time I am
recording
images with NI-Imaq device (PCI-1405). I am also communicating with two
other
instruments through a USB and a serial port. At random times (once every month or
week
or sometimes a couple of times within the same day) Labview crushes and I
am
getting the following error message:
LABVIEW.LIB could not locate "RTsetCleanupProc"
After that I have to reboot the computer for Labview to be able to run.
Please advice on what steps to take in order to fix these problem.
I am also attaching the corresponding failure log file
Thanks,
George
Attachments:
lvlog05-19-08-14-58-071.txt 1 KBHi Michelle,
Thanks for getting back to me.
I got very prompt and useful feedback through email from one of NI’s Application Engineers. However, part of the process of troubleshooting this issue involved waiting for LabView to crash again and look at the error log report. Unfortunately (!?) this did not happen within reasonable time and NI considered this issue resolved. When recently LabView crashed again I tried to follow up with this issue but I was redirected to this message board.
-George -
10g Admin/Desktop error :could not locate or parse the .dbc file error
Hi there,
can any one help me how to fix this error i get this while connecting to Discoverer Admin/Desktop edition 10g ver 10.1.2
Unable to connect to: username@crp2
Failed to connect to database - could not locate or parse the .dbc file
c:\oracle\BIToolsHome_1\discoverer\secure\us-oracle3.dbc corresponding to the given Oracle Applications instance
i had created the system environment variable FND_SECURE and i've placed the .dbc files in the folder (C:\oracle\BIToolsHome_1\discoverer\secure)
but, i still get error
Thanks,
MaxHi Russ
Here's some additional info from my own library:
1. Set or check the following registry settings on your Admin PC:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\EnableTriggers should be DWORD with a value of 1
HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\DefaultPreserveDisplayPropertyForRefresh should be a DWORD with a value of 1
2. You need to create for yourself a folder called SECURE under your ORACLE folder:
e.g. mkdir c:\oracle\secure
3. Copy the DBC File from the E-Business Suite database and place it in the secure directory. It will be located in the TOP directory in the database.
4. Create a Windows System Variable FND_SECURE with the value as in step 2 above: e.g. c:\oracle\secure
5. Update your %ORACLE_HOME%/network/admin/tnsnames.ora to include an entry for the E-Business Suite database. The database name must match the two_task entry in the dbc file.
6. You may have to rename the dbc file so that it matches the name by which you are referring to that database in your TNS Names file
Does this help?
Best wishes
Michael
Maybe you are looking for
-
I have the laserjet 4m plus plugged into the time capsule via a CAT5 cord and it worked fine in 10.5. Now I do not see the printer when I go to set it up. Does anyone know how to retrieve the IP address from the printer? Also which driver should I us
-
Ok, I'm designing a forms-based system using C# in Visual Studio 2005. My goal is to created a PDF form in LiveCycle Designer, put it on the website, send XFDF (or whatever) to the PDF on the client side to pre-populated it, then have the user submit
-
When I use the healing brush, I see the white paint, but when I click and let go, nothing happens. I am on a Mac.
-
Hi All, I am new to this BO, I was reffering some documnets in which they have mentioned regarding the SQL query view,i.e, every query will be converted to its equivalent sql query, but this option is disabled(not active) when I am working. Does an
-
Help me