Could not Locate Workbook in Production system  ?

Hi ,
Can  any one explain me the procedure to transport  workbook from Dev to Prod.
I have recently transported  some queries and  workbook . Transportation went fine , I  am able to see the queries in Production system . But i failed to locate all my workbooks in Production system .  I have searched for the work books with Workbook ID and with description but it is of no use. I can  see my transported work book in Meta data Repository.
Your help is appreciated .
Thanks in Advance

Hi  Rob,
i  am a bit clear now.
I  have 30 workbooks in production system , they are not in dev , I mean  30 workbooks are directly created  and assigned in production system.
Now i  have created 10 new workbooks in development. My  devlopment system has only 10 new workbooks.
as per my understanding from your reply is  ' If i transport the role  i  can only have 10 newly created workbooks in production and loose 30 workbooks . Which  i  don't want .
i  want these 10 workbooks to transport in to production system without effecting existing 30 workbooks in production system

Similar Messages

  • BEA-141230 Could Not locate descriptor file for System Resource: DS name

    Guys,
    When I start the Admin and Managed server ..I get below warning message.
    *<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>*
    I know that weblogic server is unable to locatie datasource1.xml file at <SOA_HOME>/user_projects/domains/base_domain/config/jdbc
    Is there any way to to get rid off from this error? I tried to delete datasource from weblogic Admin console, but get below error:
    java.lang.NullPointerException
    All changes have been activated. No restarts are necessary.
    Errors were encountered while performing this delete operation.
    Thanks,
    Ab

    Are you starting servers with the root user? make sure that using whichever user you are starting server, it has full access on MW_Home and it's sub-directories. You may consider raising a support SR.
    Regards,
    Anuj

  • Could not locate compiled schema resource schema/system/s1130C5BD40C5682431D4FD64179031DE/index.xsb

    can somebody pleas tell me why is xmlbeans looking for an index.xsb? i cant run
    my java classes because it is looking for this file. how can i solve this?

    Unfortunately the generated error messages are really misleading. Nevertheless
    I was able to find the solution.
    The orginal error message was:
    Caused by: java.lang.RuntimeException: Could not instantiate SchemaTypeSystemImpl
    (java.lang.reflect.InvocationTargetException): is the version of xbean.jar correct?
    I tried to locacate the error somewhere in the implementation of XMLBeans, but
    no success. Afterwards I included an printStackTrace() command in the code section
    where the error has been thrown and the more detailed error message was:
    Could not locate compiled schema resource schema/system/sC8870485F5E7AEB8A9BBEB56FEB321E8/index.xsb
    Obviously the schema resource has not been compiled. Then I looked in the parameters
    of scomp and found:
    H:\UserData\SunONE\XMLBeans>scomp
    Compiles a schema into XML Bean classes and metadata.
    Usage: scomp [opts] [dirs]* [schema.xsd]* [service.wsdl]* [config.xsdconfig]*
    Options include:
    -cp [a;b;c] - classpath
    -d [dir] - target binary directory for .class and .xsb files
    Obviously the xsb Files are not generated, if the target binary directory is not
    explicitly mentioned. Therefore I modified the compile command to
    H:\UserData\SunONE\XMLBeans>scomp -src GenClasses -d GenClasses -out myMainData.
    jar MainData21.xsd
    and, voila, it works!!!!!

  • The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe

    After installing version 5.1.1 of the Flexmotion driver, and installing f5 update, I got the following message after rebooting the system: The \System Root\System32\drivers\NatMotion.sys device could not locate the entry point IoSetDeviceInterfaceState in driver ntoskernal.exe. OS is Win NT. I see device in MAX , but can not initialise it, and cannot make firmware update.
    I do not se device from NT system menager.

    The instructions on the f5 update are not 100% explicit about what to do for NT. The NatMotion.sys file should not be replaced on NT systems, only on the specifically listed OSes. Uninstall and reinstall the 5.1.1 driver along with the f5 update, however only install the components that do not specifically mention a particular OS.
    Regards,
    Brent R.
    Applications Engineer
    National Instruments

  • The system could not locate the EDI partner agreements

    Hello all,
    I am trying to setup the DESADV message in SAP, but I am having some problems.
    1. I've created the LAVA output relationship via VV21 with that customer
    2. I've created the relationship in WE20
    2.1 Under the KU partner type, I've created the outbound parameters: SP -DESADV and SP -SHPMNT
    2.2 In MESSAGE CONTROL option, I've added Application V2, Message type LAVA and Process code SD05 or SD11 depending on the message
    But, when I try to add the LAVA message to the outbound's delivery header, I get an error message that says:
    "The system could not locate the EDI partner agreements (outbound) for
    partner 2.
    You cannot use transmission medium 'EDI' with this partner."
    Any help with this issue? thank you

    Hi,
    Just have few checks at your end as below:
    1. go to WE20
    2. select you customer
    3. select outbound parameters
    4. click on details {blue lens below}
    5. in outbound options tab -- have you maintained the receiving port ? also in basic type - have you maintained the mesage type?
    6. in message control tab - have you maintained appropriate entries ?
    7. finally very much important check > hope you have not activated the TEST check box in the initial partner profile>outbound parameters>partner functions field...
    Hrishi

  • Getting error 'could not locate ASM instance' when make copy of ASM VM

    Hi everyone,
    I make virtual machine of OEL 5.7 with oracle 10.2.0.1 and successfully configured ASM instance. I am using vmware workstation.
    Now when I make copy of this virtual machine and startup database, then I get the below error:
    [oracle@oelinux ~]$ export ORACLE_SID=asmdb
    [oracle@oelinux ~]$ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.1.0 - Production on Sat Sep 29 01:10:26 2012
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+ASMGROUP/asmdb/spfileasmdb.ora'
    *ORA-17503: ksfdopn:2 Failed to open file +ASMGROUP/asmdb/spfileasmdb.ora*
    ORA-15077: could not locate ASM instance serving a required diskgroup
    So how can i solve this problem??
    Note: I copy this VM using both copy/paste and clone option, but get this error both times.
    Regards,
    Khurram Bhatti

    EdStevens wrote:
    Khurram Shehzad wrote:
    I add 3 SCSI vmware disks. and then use them as a raw device. no ASMLib is used.
    I refer below tutorial
    [http://www.oracle-base.com/articles/10g/asm-using-asmlib-and-raw-devices.php]
    That tutorial picks up after you created the disks.
    How did you create the virtual disks attatched to your vm? What are its properties - from VMWorksation's perspective.
    How did you create the "copy" of the vm?
    It depends on how you actually created the disks, at the vm level, not the partitioning and formatting at the vm's OS level. I've used Tim's tutorials myself on some other ASM related projects, and he typically has you create the ASM disks as 'sharable', which would mean they would not copy necessarily copy with the vm. I've not played around the with variants much, but I'm pretty sure what you are seeing is a result of either the way the disk was created in the original vm, or the way you made the copy of the vm, or both.
    Take a look at the machine properties of the two vms in the VMWorkstation control panel, looking at the HDD definitions. Compare and contrast.Hi EdStevens,
    My problem resolved with below steps. Thanks fro your replies.
    export ORACLE_SID=+ASM
    sqlplus sys as sysdba
    Connected to an idle instance.
    SQL> startup mount
    SQL> alter system register;
    SQL> exit
    [oracle@oelinux ~]$ export ORACLE_SID=asmdb
    [oracle@oelinux ~]$ sqlplus sys as sysdba
    Connected to an idle instance.
    SQL> startup
    ORACLE instance started.
    Regards,
    Khurram

  • Installation Error "Could not determine information about file system"

    Hi, i get the following error trying to install ABAP central instance on windows server 2003 enterprise edition. I am trying to do a local installation.
    Anybody have any ideas what i am doing wrong?
    INFO 2007-05-13 23:50:40
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:40
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:40
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:41
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\change.log.
    INFO 2007-05-13 23:50:42
    Output of change user /install is written to the logfile change.log.
    WARNING 2007-05-13 23:50:42
    Execution of the command "change user /install" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
    INFO 2007-05-13 23:50:42
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ENTERPRISE\Administrator' on host '.'.
    INFO 2007-05-13 23:50:42
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\summary.html.
    PHASE 2007-05-13 23:50:42
    Prepare the installation program.
    INFO 2007-05-13 23:50:49
    Installation start: Sunday, 13 May 2007, 23:50:39; installation directory: C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI; product to be installed: SAP NetWeaver '04 SR1> SAP System Installation> ABAP System> Oracle> Unicode> Central Instance Installation
    INFO 2007-05-13 23:50:50
    Host operation t_HostInfo_SHARED processed successfully.
    ERROR 2007-05-13 23:55:28
    FSL-02107  Path component contains reserved character (':'): C:
    ERROR 2007-05-13 23:55:28
    FSL-02106  Path contains reserved character (':'):
    C:
    SAP
    ERROR 2007-05-13 23:55:28
    MOS-01236  Could not determine information about file system enterprise:, mounted at unknown.
    WARNING 2007-05-13 23:55:28
    The step GetMountInfo with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo was executed with status ERROR.

    Hi.. Philip...
    During installation when it prompts / gives us to  type / Browse the installtion sources like installation master / ker cd's / installation export .......,
    What did you do ?
    did you browse to the respective directory ??
    or
    did you manually type ??
    I got the same problem on unix like. On oversight instead of browsing i typed manually and by mistake in one of the path i added space in one of the installation source path and installation ended with not able to locate file system error.
    if you have typed it manually .. i beleive it could be similar to this ??
    Update your reply
    Rgds
    PR

  • SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

    Hi,
    I am trying to figure out how to fix my problem
    Error: Could not be opened. Operating system error code 5(Access is denied.)
    Process Description:
    Target Database Server Reside on different Server in the Network
    SSIS Package runs from a Remote Server
    SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
    SSIS Package use variables to specified the share location of the files using UNC like this
    \\server\files
    Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
    In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
    I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
    Below post it has almost the same situation:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

    Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

  • Error: The e-mail server could not be reached when the system was trying to

    Dear All,
    I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
    And when i configure the Mail Transport in the system i get the below message on the eMail Window:
    "Error: The e-mail server could not be reached when the system was trying to send the message!
    javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
    I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
    Thanks,
    MS

    Hi,
    It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but  still i had to maintain proxy configuration.
    Since it giving authentication error, it feel it could be proxy error.
    Please refer below links which talks about same error :
    http://java.sun.com/products/javamail/FAQ.html#smtpauth
    Or else i think it is issue with port.
    Regards,
    Jigar Oza
    Edited by: jigar oza on Jul 6, 2010 12:43 PM

  • Upgrading to MBAM 2.5: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0.....the system cannot find the file specified.

    Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
    2.5. After upgrade if I go to selfservice portal via
    https://myserver.mycompany.com/selfservice, I get this error:
    Server Error in '/SelfService' Application.
    Could not load file or assembly 'System.Web.WebPages.Razor,
    Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
    dependencies. The system cannot find the file specified.
    Description:
    An unhandled exception occurred during the execution of the current web
    request. Please review the stack trace for more information about the error and
    where it originated in the code.
    Exception Details:
    System.IO.FileNotFoundException: Could not load file or assembly
    'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
    PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
    find the file specified.
    Source Error:
    An unhandled exception was generated during the execution of the
    current web request. Information regarding the origin and location of the
    exception can be identified using the exception stack trace below.
    Stack Trace:
    [FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
    System.Web.Mvc.PreApplicationStartCode.Start() +0
    [InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
    System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
    System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
    System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
    System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
    System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
    [HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
    System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
    System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
    System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
    Anyone know how to solve this? Thanks in advance

    Sorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
    here.
    If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319

  • Need Help! "Could not locate the resource file in the Configuration folder."

    I had just purchased and installed Adobe Crerative Design Suite last night. Every program works except Dreamweaver, which gives me the error message:"Could not locate the resource file in the Configuration folder. This File is required to run Dreamweaver. Please reinstall the application". I am suspicious because the was a previous version of Dreamweaver on the computer before this installation, but I unistalled it. I do not understand why I get this message. Is there a file somewhere that is missing or at faut. How can I remedy this? Thanks
    ~Todd

    Nadia,
    Your posted resources worked for me. Thank you! After many attempts (to include Adobe's overseas call canter) to resolve the same installation and run errors, I used your suggested steps and I finally have a clean and running install. I did have to take a few extra steps;
    First I downloaded both Cleaning  scripts. For CS4 & CS3.
    Next I downloaded Windows installer/cleaner. I have Windows Vista Home Premium and that is a required installed program to run Adobe's cleaning script.
    Once I was sure I had all the programs/scripts I needed (per your instructions and the instructions found on the Cleaning scripts site) I disconnected my computer from the Internet.
    Then I disabled all running programs especially all Anti-virus and firewall programs and any others that have calls of any kind: i.e. Boinc (Seti), Skype, email programs (Windows Live Mail), etc.
    Next I uninstalled all CS4 products and even though I was told that Macromedia Studio MX 2004 can stay installed (read that on one site and the overseas Tech also reinforced that information) I uninstalled MX 2004.
    I then rebooted and installed the Windows installer/cleaner program and ran the Adobe CS4 cleaner script twice.
    After another reboot I installed Dreamweaver CS4 first, rebooted (can't reboot enough with Windows!) and, yes you guessed it, rebooted.
    I then attempted to open Dreamweaver CS4 and for the first time it ran without the error!
    I then installed Adobe Ps CS4 and rebooted and that work for the first time as well.
    I can't say for sure if Macromedia Studio MX 2004 caused the install errors on the Adobe products but without it and ALL that uninstalling and rebooting and running cleaning scripts and installing and rebooting, Adobe finally felt my computer was clean enough to call it home and work.
    Thank you again for your information and I suggest if anyone else finds their way here that they follow your instructions to the letter. Takes a long time but a proper and clean install will be the result.

  • ORA-15077: could not locate ASM instance serving a required diskgroup

    My cluster is gone...
    due to restart of the network, the cluster fenced node2 from my configuration. Since the evicting, the cluster is not starting any more.
    ocrcheck
    PROT-602: Failed to retrieve data from the cluster registry
    PROC-26: Error while accessing the physical storage
    ORA-15077: could not locate ASM instance serving a required diskgroup
    The OCR Disks are within ASM.
    Oracleasm does see the disks
    crsctl query css votedisk is also giving the correct information about the votingsdisks which are also in the same OCR diskgroup
    crsctl query css votedisk
    ## STATE File Universal Id File Name Disk group
    1. ONLINE 0eb6aaa85e5c4fd6bf9d0481cfd7d517 (ORCL:VOTE1) [OCR]
    2. ONLINE 5a66449fbada4f34bf0c3be4574f03bc (ORCL:VOTE2) [OCR]
    3. ONLINE 76ad295ebc054f07bfea124fb08da432 (ORCL:VOTE3) [OCR]
    Located 3 voting disk(s).
    Any ideas why the cluster is not starting anymore ? I am afraid of restarting node 1...
    chris

    Really would help to know what operating system you are using...
    When you set up the disks for use with ASM, did you stamp them with ASMLIB? If not, did you configure device persistance with udev? Without using one of these methods, the disk identification can change when a node is restarted, and ASM is then unable to locate the disks.

  • ISE Could not locate Network Device or AAA Client

    When authenticating using 802.1x and MAB, I recieve an authentication failure with the error 11007(Could not locate Network Device or AAA Client). The root cause that ISE spits back at me is "Could not find the network device or the AAA Client while accessing NAS by IP during authentication." I did pretty much everything by the book except instead of using a loopback interface I used a vlan with a defined ip address.  Could this be causing the problem?
    Here is the config of the port that I'm testing on:
    interface GigabitEthernet1/0/9
     switchport access vlan 9
     switchport mode access
     switchport voice vlan 8
     ip access-group ACL-ALLOW in
     srr-queue bandwidth share 1 30 35 5
     queue-set 2
     priority-queue out
     authentication event fail action next-method
     authentication event server dead action reinitialize vlan 4
     authentication event server dead action authorize voice
     authentication host-mode multi-auth
     authentication open
     authentication order dot1x mab
     authentication priority dot1x mab
     authentication port-control auto
     authentication violation restrict
     mab
     mls qos trust device cisco-phone
     mls qos trust cos
     dot1x pae authenticator
     dot1x timeout tx-period 10
     auto qos voip cisco-phone
     spanning-tree portfast
     service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
    end

    I can ping both the vlan and the endpoint from the ISE.  As far as allowing ISE to speak snmp and RADIUS to the NAD, I have enabled it on the NAD config inside the ISE. I have also double checked the snmp and radius shared passwords.
    I have gotten MAB authentication to work but I am still getting the same error for dot1x authentication. Here are some of the configs on the switch.
    aaa new-model
    aaa authentication dot1x default group radius
    aaa authentication dot1x defualt group radius
    aaa authentication dot1x group group radius
    aaa authorization network default group radius
    aaa accounting dot1x default start-stop group radius
    aaa server radius dynamic-author
    aaa session-id common
    ip radius source-interface TenGigabitEthernet1/0/1
    radius-server attribute 6 on-for-login-auth
    radius-server attribute 6 support-multiple
    radius-server attribute 8 include-in-access-req
    radius-server attribute 25 access-request include
    radius-server dead-criteria time 5 tries 3
    radius-server host 10.10.10.47 auth-port 1812 acct-port 1813 test username test key 7 097940581F5412162B464D
    radius-server vsa send accounting
    radius-server vsa send authentication
    dot1x system-auth-control
     authentication order dot1x mab
     authentication priority dot1x mab
     dot1x pae authenticator
     dot1x timeout tx-period 10

  • Deploy Web Site Error:Could not load file or assembly 'System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies

    I have created a ASP.NET web Site (not Web application), using Visual Studio 2012 Ultimate and "SQL Server Compact 4.0 Local Database" in my C# Code.
    I am able to successfully compile & publish the website to another IIS Web Server, with Operating System Windows Server 2008 R2 Standard. I can even test, successfully, this website on the machine I developed it in.
    I am publishing the website, from within Visual Studio, to a Network web server running IIS.  To Publish I am using Build-> "Publish Web Site".  In the Publish Profile, I am using Web Deploy Method. Even though I am using, successfully,
    "SQL Server Compact 4.0 Local Database" in my website, the "settings" (in Publish Profile) does not detect any Databases in the project. Which may not be a problem.
    When I try to bring up the web site on the IIS Web Server machine I get the following error..    
    Could not load file or assembly 'System.Data.SqlServerCe, Version=4.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies .
    As my project is a Web Site, not Web Site Application, I do not have a references node in the Solution Explorer. I think the System.Data.SqlServerCe.dll, which is type GAC in my project, is not getting published to the webserver, which is causing this Error.
    Can I copy this .dll over manually ? If yes, where to put on the ISS Web Server ? I do not see any bin folder.
    Any help to resolve this error will be appreciated.
    diana4

    Hello.. I went ahead and created web application project and have gone past that error. But I have a new error now
    System.Data.SqlServerCe.SqlCeException: Unable to load the native components of
    SQL Server Compact corresponding to the ADO.NET provider of version 8876.
    Install the correct version of SQL Server Compact. Refer to KB article 974247
    for more details.
    Compiling and Publishing (Deployment) are both successful 
    In my project, when adding reference to SQL Server Compact Edition , there are 2 possible locations to reference the DDL from:
    C:\Program Files\Microsoft SQL Server Compact Edition\v4.0\Private
    C:\Program Files\Microsoft SQL Server Compact Edition\v4.0\Desktop.
    I have tried both. I get the same error as shown above.
    Interestingly, in My WebConfig, I do not see any reference to System.Data.SqlServerCe.
    Yet, the Website works when I click on Ctrl+F5 
    diana4

  • 10g Admin/Desktop error :could not locate or parse the .dbc file error

    Hi there,
    can any one help me how to fix this error i get this while connecting to Discoverer Admin/Desktop edition 10g ver 10.1.2
    Unable to connect to: username@crp2
    Failed to connect to database - could not locate or parse the .dbc file
    c:\oracle\BIToolsHome_1\discoverer\secure\us-oracle3.dbc corresponding to the given Oracle Applications instance
    i had created the system environment variable FND_SECURE and i've placed the .dbc files in the folder (C:\oracle\BIToolsHome_1\discoverer\secure)
    but, i still get error
    Thanks,
    Max

    Hi Russ
    Here's some additional info from my own library:
    1. Set or check the following registry settings on your Admin PC:
    HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\EnableTriggers should be DWORD with a value of 1
    HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\DefaultPreserveDisplayPropertyForRefresh should be a DWORD with a value of 1
    2. You need to create for yourself a folder called SECURE under your ORACLE folder:
    e.g. mkdir c:\oracle\secure
    3. Copy the DBC File from the E-Business Suite database and place it in the secure directory. It will be located in the TOP directory in the database.
    4. Create a Windows System Variable FND_SECURE with the value as in step 2 above: e.g. c:\oracle\secure
    5. Update your %ORACLE_HOME%/network/admin/tnsnames.ora to include an entry for the E-Business Suite database. The database name must match the two_task entry in the dbc file.
    6. You may have to rename the dbc file so that it matches the name by which you are referring to that database in your TNS Names file
    Does this help?
    Best wishes
    Michael

Maybe you are looking for