Could not mount database (hr=0x80004005,ec=1108)

Hi
I know this question has been asked before but my issue is different..
Exchange 2013 SP1 on Server 2012 R2
Was in process of migration from Exchange 2010 SP3 to Exchange 2013 SP1
Mail DB on d:\
Log Files on E:\
Since Migration was going....... No backups... :(
my Logfiles HDD crashed and not the database is not mounting... getting error
(hr=0x80004005,ec=1108)
Following is the output of mount database
Mount-Database -Identity maildb2013ex01
Failed to mount database "maildb2013ex01". Error: An Active Manager operation failed. Error: The database action
failed. Error: Operation failed with message: MapiExceptionDatabaseError: Unable to mount database. (hr=0x80004005,ec=1108)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0x454
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x1D7050
    Lid: 57728   dwParam: 0x1D710C
    Lid: 53632   dwParam: 0x1D7244
    Lid: 61824   dwParam: 0x1D7244
    Lid: 46144   dwParam: 0x1D7244
    Lid: 34880   dwParam: 0x1D7293
    Lid: 34760   StoreEc: 0xFFFFFDDA
    Lid: 41344   Guid: 90bc4584-670e-4231-beb8-372cc68a87fa
    Lid: 35200   dwParam: 0x2388
    Lid: 46144   dwParam: 0x1D75EE
    Lid: 34880   dwParam: 0x1D75EE
    Lid: 54472   StoreEc: 0x1388
    Lid: 42184   StoreEc: 0x454
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0x454      [Database: MailDB2013EX01, Server: Exchange01.local.saisystems.com]
    + CategoryInfo          : InvalidOperation: (MailDB2013EX01:ADObjectId) [Mount-Database], InvalidOperationExcep
   tion
    + FullyQualifiedErrorId : [Server=EX01,RequestId=cf57b110-08c1-4808-b773-a7f7f50d7dbf,TimeStamp=7/6/2014 8:3
   9:29 AM] [FailureCategory=Cmdlet-InvalidOperationException] AA4B49BB,Microsoft.Exchange.Management.SystemConfigura
  tionTasks.MountDatabase
    + PSComputerName        : ex01.local.domain.com
Following is output of essutil
eseutil /mh "D:\MailStore\MailDB\MailDB2013EX01.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 15.00
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
         Database: D:\MailStore\MailDB\MailDB2013EX01.edb
DATABASE HEADER:
Checksum Information:
Expected Checksum: 0xe52a9911
  Actual Checksum: 0xe52a9911
Fields:
        File Type: Database
         Checksum: 0xe52a9911
   Format ulMagic: 0x89abcdef
   Engine ulMagic: 0x89abcdef
 Format ulVersion: 0x620,20
 Engine ulVersion: 0x620,20
Created ulVersion: 0x620,20
     DB Signature: Create time:05/03/2014 14:34:31.599 Rand:3476067128 Computer:
         cbDbPage: 32768
           dbtime: 75195 (0x125bb)
            State: Dirty Shutdown
     Log Required: 370149-370261 (0x5a5e5-0x5a655)
    Log Committed: 0-370262 (0x0-0x5a656)
   Log Recovering: 370262 (0x5a656)
  GenMax Creation: 07/05/2014 20:08:06.321
         Shadowed: Yes
       Last Objid: 446
     Scrub Dbtime: 0 (0x0)
       Scrub Date: 00/00/1900 00:00:00
     Repair Count: 0
      Repair Date: 00/00/1900 00:00:00.000
 Old Repair Count: 0
  Last Consistent: (0x3D,32,2D7)  05/04/2014 03:13:28.088
      Last Attach: (0x3E,2,268)  05/04/2014 03:14:06.633
      Last Detach: (0x0,0,0)  00/00/1900 00:00:00.000
    Last ReAttach: (0x5A651,2,0)  07/05/2014 20:07:29.961
             Dbid: 1
    Log Signature: Create time:05/03/2014 14:34:31.505 Rand:657597575 Computer:
       OS Version: (6.2.9200 SP 0 NLS ffffffff.ffffffff)
Previous Full Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Incremental Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Copy Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Differential Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Current Full Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Current Shadow copy backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
     cpgUpgrade55Format: 0
    cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
       ECC Fix Success Count: none
   Old ECC Fix Success Count: none
         ECC Fix Error Count: none
     Old ECC Fix Error Count: none
    Bad Checksum Error Count: none
Old bad Checksum Error Count: none
  Last checksum finish Date: 00/00/1900 00:00:00.000
Current checksum start Date: 00/00/1900 00:00:00.000
      Current checksum page: 0
Operation completed successfully in 1.16 seconds.
The DB Size id 300GB, right now copying it to separate location
Can someone enlighten me what next is to be done or how can I mount this DB without log files...
will it mount without Logfiles???
Thanks
Bikram
bikram

Hi,
According to your description, your problematic database is in dirty shutdown state and your soft repair ends with errors. In this case, I'd like to say, the dirty shutdown state may be caused by that the required log files are missing. Thus, I recommend
you try the hard recovery by using  Eseutil /p or
Eseutil /d /r.http://support.microsoft.com/kb/259851/en-us
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

  • Regarding ORA-01102 ORACLE COULD NOT MOUNT DATABASE IN EXCLUSIVE MODE.

    Hellow Friends,
    I was testing my recovery strategy for control file. Out of two my control files I deleted one and tried to start when oracle gave me error that could not find so and so file in such and such location. I than copied first member which is in other location to the deleted file location. Since than I could not start my database gving me same error ORA-01102.
    Yes I can recreate control file because I am having all my other files intact.
    Now is there anybody who share knowledge with me to feel me pride of such honour.
    Thanks All.
    Your Friend.
    Sumeet.

    Hi all
    On this - it had me vexed for a while, I was installing
    8.1.7 on Solaris 2.9 - but when I went to prep the db,
    kept on getting the error 01102.
    Found out that if I shut down the db (immediate),
    changed the 'remote_password' param to shared then went back in to svrmgr - reshut the database and redid startup pfile=$ORACLE_HOME/etc it cured the problem.
    Suspect this is a hangover from 7, when Oracle kept enforcing defaults on setting up dbs, bit like their catalog and catproc scripts, they still have errors that were there in the
    year dot.
    Cheers

  • Database can not mount in exchange server 2013 due to Unable to mount database. (hr=0x80004005, ec=-543)

    Hello All,
    Database can not mount. In this Database domain Administrator mailbox have.
    Please suggest. It's very important
    The error:
    [PS] C:\Windows\system32>Mount-Database -Identity MBX-01 -Force
    Confirm
    At least one committed transaction log file is missing. Mounting this database will result in data loss. If you can
    locate the missing log files, don't continue. Are you sure you want to continue?
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [?] Help (default is "Y"): a
    Failed to mount database "MBX-01". Error: An Active Manager operation failed. Error: The database action failed.
    Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing: Unable to mount database.
    (hr=0x80004005, ec=-543)
    Diagnostic context:
        Lid: 65256
        Lid: 10722   StoreEc: 0xFFFFFDE1
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 45120   dwParam: 0x51FF5F0
        Lid: 57728   dwParam: 0x51FF68C
        Lid: 46144   dwParam: 0x51FF709
        Lid: 34880   dwParam: 0x51FF709
        Lid: 34760   StoreEc: 0xFFFFFDE1
        Lid: 41344   Guid: 1c2c8cab-ae3f-40c8-8024-ffc776b22360
        Lid: 35200   dwParam: 0x2EFC
        Lid: 46144   dwParam: 0x51FFA55
        Lid: 34880   dwParam: 0x51FFA55
        Lid: 56264   StoreEc: 0x1388
        Lid: 46280   StoreEc: 0xFFFFFDE1
        Lid: 1750    ---- Remote Context End ----
        Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: MBX-01, Server: EG-EXCHG-01.ABC.com]
        + CategoryInfo          : InvalidOperation: (MBX-01:ADObjectId) [Mount-Database], InvalidOperationException
        + FullyQualifiedErrorId : [Server=EG-EXCHG-01,RequestId=ca57e784-43c7-4357-9ab6-08881c87bb77,TimeStamp=9/18/2014 5
       :31:08 AM] [FailureCategory=Cmdlet-InvalidOperationException] 51350054,Microsoft.Exchange.Management.SystemConfigu
      rationTasks.MountDatabase
        + PSComputerName        : eg-exchg-01.ABC.com

    Hi,
    This issue indicate corrupted database or corrupted logs. I suggest you to check and repair the database or check and repair the database log.
    1. Check the state of database by following command: eseutil /mh "Path of the database"
    Ps: Default path of the database is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\Mailbox Database.edb”
    Default path of the log files is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\E00”
    2. If the state is in clean shutdown, move all the log files from the Transaction logs folder location and then mount the database.
    3. If the state is in dirty shutdown, check if the log files that is indicated as Logs required is available or not.
    4. You can run Eseutil ml “Path of the log file\e00” to make sure that the log files is required is in a Clean state. This command will help you check the health of all the log files in the location.
    5. If the log files are healthy, then try Soft recovery with the command Eseutil /r e00 /l ”Path of log files” /p “Path of the database” 
    Note:
    Make sure you make a backup of the database before attempting any kind of repairs
    6. Once the command completes successfully, then mount the database.
    7. In case the required log files are not available in a clean state or missing, either restore from a successful back up or perform Hard repair with defragment.
    Refer to this file about hard repair:
    http://gallery.technet.microsoft.com/Step-by-Step-Exchange-2013-f8bed401
    Hope this will be helpful for you

  • MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-501)

    We have sbs 2011 standard. Yesterday. exchange public folder cannot be mounted. It show error :
    An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-501).
    I run eseutil /mh. it tells me dirty shutdown. I then run eseutil /p. to change to clean shutdown. It still have same error.  I try to use asiedit to remove public folder. It doesnot have delete option.
    Please help
    gary zhou

    Hi,
    I think you could look into the Event Viewer to verify whether there are some related errors or warnings included. I think it could be checkpoint here. At the same time, you need to run the Exchange Best Practice Analyzer to have a general health check of
    your server.
    Actually, you could delete the public folder in the ADSI Edit if you like,
    Open ADSI-Edit and got to configuration
    Navigate to this path:
    CN=Configuration,DC=DOMAIN,DC=LOCAL
    CN=Services
    CN=Microsoft Exchange
    CN=EXCHANGE_ORG
    CN=Administrative Groups
    CN=Exchange Administrative Group (FYDIBOHF23SPDLT)
    CN=Databases
    CN=PUBLIC_FOLDER_DATABASE
    Just like a figure below:
    Note: You need to make sure that there is no useful information included in the public folder database.
    Regards,
    James
    James Xiong
    TechNet Community Support

  • Upgrade to Yosemite, iPhoto won't open and NTFS-3G could not mount error with new external HD

    Help! 
    I just did a software update to get OS X Yosemite 10.10.2 on my MacBook Pro.
    Now iPhoto won't open and I get this error:
    "Your photo library is either in use by another application or has become unreadable....Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
    So I do this and try to repair the database as suggested and I get another error:
    "iPhoto will open as soon as the iPhoto library is available. Time Machine might be backing it up." 
    But it's not - no external hard drive is connected. 
    I'm terrified I can't get access to my photos (and I admit I haven't backed up with Time Machine for over a year - my mistake that I won't make again). 
    So I bought a brand new external hard drive (seagate for mac and pc, 2TB) so I could save only my photos to the hard drive (because I googled and read you can manually save your photos to disk by dragging and dropping the photo library onto the external hard drive). 
    But I can't even get the hard drive to work....I get this error
    "NTFS-3G could not mount /dev/disk2s1
    at /Volumes/Seagate Backup Plus Drive because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)"
    I google the issue again and it says to uninstall NTFS-3G but I actually think I just deleted it a long ago without uninstalling it properly??  I don't know....
    (a)  how do i fix iphoto
    (b)  how do i get external hard drives to work with this OS (I've read lots of posts and don't really understand the advice)
    (c)  how do i get all my photos onto the hard drive safely so I can import them onto a PC
    Any assistance would be magic for this little lady! 

    (c)  how do i get all my photos onto the hard drive safely so I can import them onto a PC
    First see if you can reformat the EHD to MS-DOS FAT with Disk Utility.  If you can
    open iPhoto and select all of the Events in the Events mode. Use the File ➙ Export ➙ File Export menu option and export to the EHD with these settings:
    Select the destination for the export to be the EHD or a folder on the EHD.  This process will create a folder for each Event in your library with the same name as the Event and contain the original image files.  The EHD will be useable by a PC and the photos will be available also.

  • Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)

    We are on Exchange 2007
    We have one database that will not mount. Whenever we try to mount we get the below error
    Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
    I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
    Initiating FILE DUMP mode...
             Database: SG3-DB.edb
            File Type: Database
       Format ulMagic: 0x89abcdef
       Engine ulMagic: 0x89abcdef
     Format ulVersion: 0x620,12
     Engine ulVersion: 0x620,12
    Created ulVersion: 0x620,12
         DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
             cbDbPage: 8192
               dbtime: 3942751903 (0xeb019e9f)
                State: Clean Shutdown
         Log Required: 0-0 (0x0-0x0)
        Log Committed: 0-0 (0x0-0x0)
       Streaming File: No
             Shadowed: Yes
           Last Objid: 877765
         Scrub Dbtime: 0 (0x0)
           Scrub Date: 00/00/1900 00:00:00
    Please help us on how to clear this error and mount the database.

    We are on Exchange 2007
    We have one database that will not mount. Whenever we try to mount we get the below error
    Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
    I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
    Initiating FILE DUMP mode...
             Database: SG3-DB.edb
            File Type: Database
       Format ulMagic: 0x89abcdef
       Engine ulMagic: 0x89abcdef
     Format ulVersion: 0x620,12
     Engine ulVersion: 0x620,12
    Created ulVersion: 0x620,12
         DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
             cbDbPage: 8192
               dbtime: 3942751903 (0xeb019e9f)
                State: Clean Shutdown
         Log Required: 0-0 (0x0-0x0)
        Log Committed: 0-0 (0x0-0x0)
       Streaming File: No
             Shadowed: Yes
           Last Objid: 877765
         Scrub Dbtime: 0 (0x0)
           Scrub Date: 00/00/1900 00:00:00
    Please help us on how to clear this error and mount the database.

  • MapiExceptionJetErrorPageNotInitialized: Unable to mount database. (hr=0x80004005, ec=-1019)

    Hi,
    Can any one help to resolve the database dismount error fixing?
    MapiExceptionJetErrorPageNotInitialized: Unable to mount database. (hr=0x80004005, ec=-1019)
    Tried..rebooted server and then tried to set-adserversettings -preferredtargetserver with correct DC
    But, still unable to mount database successfully. Unfortunately, we dont have backup for this mailbox database as it's more than 1 TB size database.
    MD

    Hi,
    Here is the error event id in server:-
    Log Name:      Application
    Source:        ESE
    Date:          7/18/2014 2:20:58 PM
    Event ID:      419
    Task Category: Logging/Recovery
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      MB04.domain.Com
    Description:
    Information Store (3548) mbx-archive1: Unable to read page 36249103 of database Q:\mbx-archive1\mbx-archive1.edb. Error -1019.
    Database size is 1TB, is there anyway to repair it? any idea how many days will take for repair the database through esutil tool?
    Please help
    MD
    Most likely not.  What's done is done.  Make sure the hardware is OK or you will end up in the same boat.......
    Make a copy of the DB and all the logs before doing anything. 
    Then you can do the /P  - and it will take several hours.
    Make another copy
    Once that completes, then do a /D to remove the cut page links.  That will also take several hours.
    fingers crossed....
    You can also make a support case with us - if this is valuable data it's worth the cost!
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • ERROR 2009-05-24 08:46:36 CJS-00288 Could not update database statistics.

    Hi all.
    i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error
    ERROR 2009-05-24 08:46:44
    CJS-00288  Could not update database statistics.<br>
    DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPDB5 returned 3.<br>SOLUTION: See brconnect.log for details.
    when i checked in brconnect.log i found below error message
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance DB5 failed
    BR0280I BRCONNECT time stamp: 2009-05-24 08.46.44
    BR0804I BRCONNECT terminated with errors
    Q))Which oracle version are you using since BRTOOLS 7.0 is designed to work with Oracle 10g?
    If you are using an oracle 9.2.* it is needed to install oracle instant client or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
    Could you please help me how to downgrade the Brtools or could you please suggest me how to proceed
    please help me
    Thanks
    Senthil

    Hi All,
    Thanks for your help, that error it has passed but now in 31 st step starting RFC jobs
    i get this error
    ERROR 2009-05-25 18:08:05
    FRF-00007  Unable to open RFC connection.
    ERROR 2009-05-25 18:08:05
    FRF-00063  RFC logon failed with message: Failed: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failedConnect_PM  GWHOST=CTSINSAPEC5, GWSERV=sapgw00, ASHOST=CTSINSAPEC5, SYSNR=00
    but early during the last error update database statistics the SAP MMC console was up and running but now SAP is down during this error
    i tried to start SAP manually but it never works dispatcher goes down, i searched in forums and thought to update the kernal, so i updated the kernal also and tried it then also same error
    please help me my situation is very pathatic, i will be greatful if you help me
    Thanks
    Senthil

  • ERROR 2008-04-30 09:10:35 CJS-00288 Could not update database statistics.

    Hi Gurus..
    Hi i am in the middle of NW 2004  installation . At the step 29 database update statistics, system stops giving error
    ERROR 2008-04-30 09:10:35
    CJS-00288 Could not update database statistics.
    DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPP47 returned
    3.SOLUTION: See brconnect.log for details.
    When i checked in brconnect.log i found below error message
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance P47 failed
    BR0280I BRCONNECT time stamp: 2008-04-30 09.10.35
    BR0804I BRCONNECT terminated with errors
    Q))Which oracle version are you using since BRTOOLS 7.0 is desinged to work with Oracle 10g?
    If you are using an oracle 9.2.* it is needed to install oracle instantclient or to downgrade your db tools (brt* tools)......  Through :Forums I came to know that we have to downgrade  the br*tools to
    Could you please help me how to downgrade the Brtools.
    It's urgent.
    Points will be awarded .
    Regards
    Jan.

    Hi janakiram
    Now i am facing the same error which you have faced before, have you solved that issue if it so could you pls help me how to solve this
    Hi All,
    i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error
    ERROR 2009-05-24 08:46:44
    CJS-00288 Could not update database statistics.
    DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPDB5 returned 3.
    SOLUTION: See brconnect.log for details.
    when i checked in brconnect.log i found below error message
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance DB5 failed
    BR0280I BRCONNECT time stamp: 2009-05-24 08.46.44
    BR0804I BRCONNECT terminated with errors
    Q))Which oracle version are you using since BRTOOLS 7.0 is designed to work with Oracle 10g?
    If you are using an oracle 9.2.* it is needed to install oracle instant client or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
    Could you please help me how to downgrade the Brtools or could you please suggest me how to proceed
    please help me
    Thanks
    Senthil

  • RMAN-06031: could not translate database keyword

    what is the solution following error
    RMAN> list backup summary;
    using target database control file instead of recovery catalog
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of list command at 02/24/2011 14:24:42
    ORA-01555: snapshot too old: rollback segment number 20 with name "_SYSSMU20_328
    6862503$" too small
    RMAN-06031: could not translate database keyword

    ORA-01555: snapshot too old
    ORA-01555  Snapshot too old
    Regards
    Asif Kabir

  • "Could not find database!"

    I installed an air package with embedded data on an XP
    machine and got the message:
    "Could not find database!"
    Sure enough, it couldn't. I build the package on an OSX
    machine, where it works fine, and simply dragged it to a windows
    share accessible by the PC. My understanding was that the build
    process was platform agnostic, but could I have been wrong? Trivial
    tests without a database worked fine previously.
    Thanks, Al

    I installed an air package with embedded data on an XP
    machine and got the message:
    "Could not find database!"
    Sure enough, it couldn't. I build the package on an OSX
    machine, where it works fine, and simply dragged it to a windows
    share accessible by the PC. My understanding was that the build
    process was platform agnostic, but could I have been wrong? Trivial
    tests without a database worked fine previously.
    Thanks, Al

  • Could not update database error while installation

    Hi i am in the middle of 4.7 installation (IDES). At the step 29 database update statistics, system stops giving error
    ERROR 2008-04-30 09:10:35
    CJS-00288  Could not update database statistics.
    <br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPP47 returned
    3.<br>SOLUTION: See brconnect.log for details.
    Can anybody tell what could be the problem.
    Thanks in advance

    Hi
    Thanks for your reply. Following are the details of file brconnect.log:
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance P47 failed
    BR0280I BRCONNECT time stamp: 2008-04-30 09.10.35
    BR0804I BRCONNECT terminated with errors

  • PROBLER UPDATING/RESETING IMPOD-COULD NOT MOUNT IPOD ERROR

    HI.
    I HAVE BEEN TRYING TO RESET MY IMPOD, BUT AFTER HAVING A LOT OT TROUBLE HAVING IT RECOGNIZED BY MU PC I FINALLY GOT TO RESTORE IT. AFTER A WHILES, I GET AN ERROR SAYING "COULD NOT MOUNT IPOD".
    CAN ANYONE HELP ME??? WHAT DOES IT MEAN? HOW DO I FIX IT?

    Hi, I tried reseting it, an that did not work.... I tried restoring it and that did not work either.... I really don't know what else to do.
    What do you mean if it is up to date?

  • Changing iPod drive letter fixes "could not mount ipod"

    So the problem I was having is that although my Windows XP SP2 machine could see my iPod nano as a drive, whenever I tried to use iPod Updater or iTunes, they could not connect/recognize the device. iTunes would simply not see that I had the device, while the updater would freeze for a good 5 - 10 minutes before giving me the "could not mount ipod" error. I tried everything, selective startup, windows update, made sure that I did indeed have USB 2.0 hardware, made sure that when I connected the ipod that Windows Device Manager said it was a "Standard ENHANCED USB Hub," restarted ipodservice, formatted ipod using windows, and probably a few other things. Still, although Windows could see the ipod just fine, apple's software just could not. I could even copy files to and from the device just fine! If only we didn't need iTunes to copy music. :P
    Well, one thing I suspected it could be is that with my computer, my primary hard drive (and I only have one) is mysteriously drive letter "D" while when I plugged in my iPod it took on the holy "C" drive letter. Could this be a problem? Possibly, but not likely I thought. So I tried some 3rd party software which emulated the ipod software and I got an error message. First that it appeared my ipod was not formatted (which it was) and second that it "could not create :\ipod_control". First thing I thought was, where is the drive letter? The software isn't even looking for the ipod in C:\, it's looking nowhere! So what I did it changed the ipod's drive letter from C to something else and viola, it worked.
    So it seems the iPod may not like it when it is named C, or there was some conflict with the iPod using the C drive letter since, I'll admit, I used to have two hard drives and the other one used to be C. Could also be a bug, who knows.

    Welcome to Apple Discussions.
    Ah, the Drive Letter C problem again.
    The iPod software and iTunes will not recognize the iPod if it is assigned to drive C. Changing the drive letter to a higher one not used by other drives will solve the problem.
    Instructions on how to change the drive letter: Strange iPod behaviour when Windows confuses iPod with network drive

  • After using migration assistant to a new Mac 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    After using migration assistant to my new MacBook Retina 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

    See if this previous discussion/link to microsoft support helps
    Re: There is a problem with the Outlook database.  Your database could not be rebuilt. [-18000]

Maybe you are looking for