Could not obtain connection to the central environment.

Question

Hi,
I have just started using iSetup on 11.5.10.2.
Initially I intend to use the same instance as source and central one.My understanding is that Source,Central and Target Instance are more of logical grouping and the same instance can be mapped for all the three.
I have mapped the instance that I am using as Source Instance and after that I try to run an Extract.The report is ending with error "Could not obtain connection to the central environment".
Kindly guide on what needs to be done to map the same instance as Source,Central and Target.
Do i need to map in thrice?
Regards
Vikas

Answer 1

Find Below the Requested Sh run outputs
ADSL-ROUTER1#sh run | beg line vty
line vty 0 4
password 7 ***********
login
scheduler max-task-time 5000
end
I have removed the IP for security reasons
ADSL-ROUTER1#sh ip route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
     x.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
S       x.x.x.x/29 is directly connected, Vlan1
C       x.x.x.x/32 is directly connected, Dialer0
     x.0.0.0/32 is subnetted, 1 subnets
C       x.x.x.x is directly connected, Dialer0
S*   0.0.0.0/0 is directly connected, Dialer0
I also keep getting the message below on the console done know if this is part of the problem
Mar 13 07:17:32.213: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Vlan1: the fragment table h
as reached its maximum threshold 16
Hope this output helps
Thanks