Could not open console in WLS 7

Hi, all
I am using WLS 7 and I can start the server within JBuilder
but when I start the server outside JBuilder , I can not open
the console window and can not run application deployed in
WLS 7.
Any idea?
Thanks in advance.

whats the error message. Do you see any warnings, exceptions while starting up
the application.
A thread dump could also help in figuring if it is stuck someplace
anand
In article <[email protected]>, Chris Wahl wrote:
Hi, all
I am using WLS 7 and I can start the server within JBuilder
but when I start the server outside JBuilder , I can not open
the console window and can not run application deployed in
WLS 7.
Any idea?
Thanks in advance.

Similar Messages

Could not open log file in Win2000 sp3 Message in console

I have configured log file for ias. Then restarted my Application server. It is giving Error message "Could not open log file ''logs/logVal.10817" in kas window. But logs files are there (created by the server itself) in the logs floder.
I have configured logs for two systems.
One system is noted all messages in the file
Second system did not not any messages.
But the files are existed in the logs folder in both the systems.
I need to configure logs for ias,Kjs and KXS also.
Please suggest me regarding this.
thanks
sudheer

Hi,
I'm not sure what operation are you trying to, can you please confirm that ? Please check what kind of messages did you try to log, is it only errors ? or all errors & warning or all messages ?. If it were only errors and warnings, then there is a possibility that the server did not encounter any of this, due to which the log file can be empty.
Regards
Raj

Distiller Server "Could not open file" modal dialog

We're running Distiller Server 8, and I've got a dilemma that I'm hoping is solvable.
This is installed on a Windows 2008 server, with jobs coming into watched folders from our OPI server. Periodically, we get a dialog box that says Acrobat Distiller "Could not open the file: P:\OPI_Data\PDF_Processing\Index_PDFs\out\<filename>". The path specifics will vary, but it's always a path to a file in process... not to a config file or anything like that.
The big problem is that this pops up as a modal dialog and Distiller won't process any more files until someone clicks "OK". On the console. On a server. In the datacenter. We run two shifts, and I'm getting really tired of phone calls at midnight saying "Distiller is hung... can you fix it?"
Is there a way to run Distiller Server in silent mode? Some way to tell it "If you have a problem, just fail that job and move on"? Having to have a server administrator connect in and click a dialog box is just silly.

That seems to have done the trick, thanks. I don't really like doing forces unless someone who knows more than I recommends it, as I see way too many threads where that has complicated things tremendously.

PDF download in 3.1 fails with "could not open" error

Just created a couple interactive reports and was truly dazzled by the functionality. But when I try to download to PDF, Acrobat Reader 8.1.1 errors with msg "... could not open <file> because it's either not a supported file type or because the file has been damaged...."
No problem with CSV download.
Is there some special Acrobat plugin that's needed?

Its true its not required, but the instructions for deploying the war file advise you to use enterprise manager console, which you won't have if you have just got XE or if you have installed a database without Enterprise manager.
Ideally we need a method of deploying the war file directly
Step 1: Installing the WAR file
Place the fop.war file (located in apex_install_directory/utlities/fop) in an accessible location on your local machine. You then follow the directions below or can view the process by running this viewlet.
Navigate to your OC4J Oracle Enterprise Manager Console eg: http://localhost:8888/em/
Select the Applications Tab
Select Deploy Button
On the "Deploy: Select Archive" page use the option "Archive is present on local host. Upload the archive to the server where Application Server Control is running." Use the file browse to select the fop.war file and click "Next" button
On the "Deploy: Application Attributes" page set the "Application Name" option to "fop" and clear the "Context Root " option and click "Next" Button
On the Deploy: Deployment Settings click the "Deploy" button Message was edited by:
Keith Jamieson

[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL

Hi All,
I am running an SSIS solution that runs 5 packages in sequence. Only one package fails because of the error:
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I have added myself to the performance counters group.
I am running windows 7 with SSIS 2008.
Any ideas would be appreciated. I have read that some have disabled the warning, but I cannot figure out how to disable a warning.
Thanks.
Ivan

Hi Ivan,
A package would not fail due the warning itself, speaking of which means the account executing it is not privileged to load the Perf counters, and should thus be safely ignored.
To fix visit: http://support.microsoft.com/kb/2496375/en-us
So, the package either has an error or it actually runs.
Arthur My Blog

SSIS.Pipeline : Warning: Could not open global shared memory to communicate with performance DLL

I am getting the following warning for my SSIS08 package:
Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I did check Warning in SSIS 2008 , but didn't find any solution.
The package processes data and executes fine , but why do I see this warning? When I run this package on my machine, I see no such warning, it's only when I deploy it to our DEV SSIS server, I get this warning.
Thanks,
Sonal

I am getting the following warning for my SSIS08 package:
Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I did check
Warning in SSIS 2008 , but didn't find any solution.
The package processes data and executes fine , but why do I see this warning? When I run this package on my machine, I see no such warning, it's only when I deploy it to our DEV SSIS server, I get this warning.
Thanks,
Sonal
You have to include the account you use to execute the package in the performance counters group.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/
Could you tell me where is "performance counters" group, I can not find it.
Thanks !

Could not open connection to the host, on port 23: Connect failed

Can anyone please help with this telnet problem on CISCO 877 ADSL Router
I am trying to telnet into my ISP Router remotely using public IP which has been dynamically assigned to the router by the ISP.
I can Ping the Router and I can also go out to the internet on that router but, I can not telnet into that router from Inside the Network nor Outside the Network. There are no Firewalls involved.
I have tried to clear the config and reconfigure it again, it does not help, I have also applied same config on another CISCO 877 ADSL Router it still does not work.
ERROR i get on the Command Prompt: Could not open connection to the host, on port 23: Connect failed
I have shown some of the Show Run out put below if that helps,
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit x.x.x.x 0.0.0.7
dialer-list 1 protocol ip permit
line vty 0 4
password 7 ***********
login
Manny Thanks
Punit

Find Below the Requested Sh run outputs
ADSL-ROUTER1#sh run | beg line vty
line vty 0 4
password 7 ***********
login
scheduler max-task-time 5000
end
I have removed the IP for security reasons
ADSL-ROUTER1#sh ip route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
     x.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
S       x.x.x.x/29 is directly connected, Vlan1
C       x.x.x.x/32 is directly connected, Dialer0
     x.0.0.0/32 is subnetted, 1 subnets
C       x.x.x.x is directly connected, Dialer0
S*   0.0.0.0/0 is directly connected, Dialer0
I also keep getting the message below on the console done know if this is part of the problem
Mar 13 07:17:32.213: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Vlan1: the fragment table h
as reached its maximum threshold 16
Hope this output helps
Thanks

Error: could not open the file /var/lib/pacman/sync/.....

Heya Arch Forums,
So it's my first time installing and I've made it to the point were I'm ready to install X11.
When I run "pacman -S xorg-server xorg-xinit xorg-server-utils" my console returns the following errors:
error: could not open file /var/lib/pacman/sync/testing.db: Unrecognized archive format
error: could not open file /var/lib/pacman/sync/multilib.db: Unrecognized archive format
error: could not open file /var/lib/pacman/sync/core.db: Unrecognized archive format
error: could not open file /var/lib/pacman/sync/extra.db: Unrecognized archive format
error: could not open file /var/lib/pacman/sync/community-testing.db: Unrecognized archive format
error: could not open file /var/lib/pacman/sync/community.db: Unrecognized archive format
error: could not open file /var/lib/pacman/sync/testing.db: Unrecognized archive format
These errors repeat again followed by:
error: target not found: xorg-twm
I'm in Canada, so I've only set my mirror list to use "Server = http://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch"
Also, in my /etc/pacman.conf all SigLevel's are = Never.
Thanks for any replies.

skunktrader wrote:Did you run pacman -Syu before attempting to install new packages?
Thanks for the quick reply
Yes, however pacman -Syu as well as pacman -Syyu return the same errors.

SAp J2ee Engine-Could not open MMC: error"could not open libsapu16vc71.dll"

Hi,
When I am trying top open MMC console to start the server getting an dialog box error "Could not open libsapu16vc71.dll". If I click OK its terminating.
Any body have idea where I need to check the logs regarding this?
please check this and help me.
Thanks
Venkat.

Hi,
Check following link.
[Re: Can't access MMC;

Could not open ... could not unlink ... /var/db/BootCache.playlist

In 10.5.7, on my QS 2002 Dual 1GHz, I keep getting this message.
Awhile ago, someone suggested I Trash this file
/var/db/BootCache.playlist,
thinking it would be regenerated next Startup.
Is there a Terminal command that I can use to accomplish this? Something that would signle my OS X, to regenerate this file next go 'round?
Here are the log entries I find troubling:
Jul 20 17:43:33 localhost com.apple.launchctl.System[2]: BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
Jul 20 17:43:33 localhost com.apple.launchctl.System[2]: BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
I see this in a number of other threads, but have not located a solution.
Thanks.

Bill Connelly wrote:
Last login: Wed Jul 22 10:13:18 on console
Even though I didn't get "data" on the second command, I went on and did all three
Moonstone-Art-Studio:~ moonstoneartstudio$ ls -l /var/db/BootCache.playlist
-rw------- 1 root wheel 58716 Jul 22 10:00 /var/db/BootCache.playlist
Moonstone-Art-Studio:~ moonstoneartstudio$ file /var/db/BootCache.playlist
/var/db/BootCache.playlist: cannot open /var/db/BootCache.playlist: Permission denied
Moonstone-Art-Studio:~ moonstoneartstudio$ BootCacheControl statistics
BootCacheControl: could not fetch cache statistics: Operation not permitted
BootCacheControl: could not fetch statistics: Operation not permitted
Duh!
I forgot that I was root when I tried this. Try again:
sudo file /var/db/BootCache.playlist
sudo BootCacheControl statistics
(don't understand the [code] ... [code] posting/reply request):
You need to put before and after the Terminal output, and the second one does not need the '/' which most of these formatting systems (eg HTML) require. Note these are 'curly' brackets, not square ones.
Thus This text will be mono-spaced like so:
This text will be mono-spaced{code}

Could not open PS CS6 because disk not available - new info

Running PS CS6 on a Mac Pro, Mt. Lion 10.8.1, 10 GB RAM, 3.6 Tb on 4 internal drives. A new problem cropped up just today. Launching PS brings error msg Could not open because a dik was not aviable, and a 2nd msg Could not open a scratch file . . . . Removing Prefs file works, but there's a BUT: I can't change some prefs without the problem reoccurring.
I can reproduce the following: reinstall PS CS6, Change 1 preference, namely make another disk the scratch disk, move it to 1st place. Problem reappears. It appears I must leave the boot disk as the primary scratch disk. All my disks are OK, repaired & permissions verified by Disk Util.
Even if I just clear prefs, verify releaunch is OK, and change this one preference, I get the prob.
FWIW here are the last few lines from the Console log:
9/2/12 3:57:12.000 PM kernel[0]: proc 2934: load code signature error 2 for file "Adobe Photoshop CS6"
9/2/12 3:57:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=2934[Adobe Photoshop ] clearing CS_VALID
9/2/12 3:57:12.000 PM kernel[0]: proc 2936: load code signature error 2 for file "AdobeCrashDaemon"
9/2/12 3:57:13.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=2937[sniffer_gpu] clearing CS_VALID
9/2/12 4:00:28.064 PM WindowServer[116]: _CGXGetWindowOrderingGroup: Operation on a window 0x425 requiring rights 0x5 by caller Photoshop

The permissions verification (and repair) functions of Disk Utility will not tell you whether a permissions problem is preventing Photoshop from using your non-boot scratch disk. That only checks to see whether directories and files have permissions which match the permissions that they were given at the time of creation or modification by Apple software installer packages.
My primary "scratch disk" is a non-boot volume. Here are the volume's permissions as seen at the bottom of a Finder Get Info window.

Safari Crash / Could not open cookie file Cookies.plist for reading

Hi everyone
I dont know why my Safari is Crashing, I review the console and I find this line:
Help... I dont how to solve the problem...
*ntlmRand failed to open /dev/random
2007-01-26 23:48:55.004 Safari[8953] Could not open cookie file "/Users/scanner9/Library/Cookies/Cookies.plist" for reading.
2007-01-27 00:00:53.553 Safari[8953] Could not open cookie file "/Users/scanner9/Library/Cookies/Cookies.plist" for reading.
2007-01-27 00:01:16.915 Safari[8953] -[BrowserWindowController loadWindow]: failed to load window nib file '/Applications/Safari.app/Contents/Resources/English.lproj/Browser.nib'.
2007-01-27 00:01:16.923 Safari[8953] Cannot load Interface Builder file 'NSAlertPanel'
Thanks.

jhpereze,
Quit Safari, find the Cookies.plist file in your Macintosh HD/Users/yourusername/Library/Cookies folder, drag it to your Desktop, log out/in or restart and let us know what happens.
If that is unsuccessful post your Safari crash log for further analysis.
;~)

Telent:could not open connection to the host on port 23 connect failed

Hi,
How to run commands of OEL5 host OS from windows XPP virtual machine(Vmware Player) on standalone desktop PC?
While runing the telnet command on windows XPP virtual machine it's gives error
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator>cd\
C:\>telnet 192.168.1.2
Connecting To 192.168.1.2...Could not open connection to the host, on port 23: Connect failed
C:\>
Thanks
Regard
GSM

user9230833 wrote:
Launcher means shortcut to execute any file which is inside folder in Linux.Launcher are created on desktop to execute by one click of mouse.You need to create a command file that contains the required instructions to run putty with whatever relevant command line switches in order to start the remote program/process on Linux.
For example, you have a trusted ssh connection (no password prompting) between your Windows account and the Linux vmware account. You need to execute command line +/home/vmware/bin/vmstart myVM+ on Linux.
Your command file in Window will look something as follows:
@echo off
"c:\program files\putty\pssh.exe" vmware@my-linux-server "/home/vmware/bin/vmstart myVM"Once you've create this command file (.cmd file extention), you can create a desktop shortcut for it and assign an icon to it.
However, first test the command file via an interactive console session to ensure it works. Also, I'm not sure you can script telnet using putty - but putty's ssh does support the standard ssh command line and one can execute programs/commands on the remote server in this fashion.
Setting up trusted ssh connections is also important as passwords is a weak security mechanism. It requires a secret to be used and coded into scripts/software that needs to be authenticated.
With ssh you generate a public/private key combination, and provide the public key as unique identifier for your o/s user and platform to a remote server (e.g. Linux). This now enables your platform and o/s user to be authenticated via the privatre/public key pair when your platform establishes a connection with the server.
In putty, generate a ssh key (RSA). Copy and paste the public key into the Linux server account's "+home/vmware/.ssh/authorized_keys+" file. Make sure that the +.ssh+ directory and key have user read/write permissions only. And that's it - no password needed by your account to ssh into the Linux server account. No secrets that need to be kept secret (and that can be stolen and used from any other platform to gain access).

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

InfoSpoke fails with message "Could not open file on application server"

BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.

Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help.

Could not open console in WLS 7

Similar Messages

Maybe you are looking for