Could not open Help File 'Aperture User Manual.PDF'
I downloaded the trial version, while waiting for my boxed version of Aperture to arrive. Once it came in, I entered the serial number and continued using the original application. However, when I try to access the user manual via Help, I get an Alert saying, "Could not open Help File 'Aperture User Manual.PDF'". I manually copied the PDF file from the CD to the documents folder, and then from there to the Applications folder - nothing makes a difference. I even reinstalled - same results. I have tried some of the other items in Help -- if it is for a manual, I get the same Alert.
Any help would be appreciated.
Russ
The files are all there. When I checked their properties, I noticed that the PDF files didn't point to adobe acrobat reader!
Before uninstalling Aperture and then reinstalling it, I tried to reinstall the latest version of Acrobat Reader. Suddenly, I could access the Aperture documents!
I am using a new iMac -- apparently, when I transfered all of my files from my old G5 iMac, Acrobat hadn't properly transfered. Reinstalling Adoe solved the problem!
Thanks for the help!
Russ
Similar Messages
-
I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardriveTry repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps. -
I recently downloaded acrobat reader dc. After download was complete, I could not open PDF files. Error read "Adobe acrobat reader DC could not open this file because its either not a supported file or the file has been damaged". Any suggestions?
HI davidd92392148,
Is this error occurring for all PDF files that you try to open? There is an issue where all file icons can change to the PDF icon after installation, so is it possible that the files you're trying to open have been affected by this issue (and aren't actually PDF files)? Please see Application, file icons change to Acrobat/Reader icon.
If that document isn't the key, then please tell us more about these files. Where are they stored? Did they open in previous versions of Reader?
Best,
Sara -
I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox). I have the users grid and oracle11g. Add groups and install grid infrastructure first as a grid user and install database as oracle user as in documentation successfully.
I have following users and groups as
[grid@orcl11g ~]$ id grid
uid=501(grid) gid=502(oinstall) groups=502(oinstall),492(vboxsf),501(grid),503(dba),505(asmdba),506(asmadmin),507(asmoper)
[grid@orcl11g ~]$ id oracle11g
uid=500(oracle11g) gid=502(oinstall) groups=502(oinstall),500(oracle11g),492(vboxsf),503(dba),504(oper),505(asmdba)
.bash_profile edited for oracle11g user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=ora11g
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=ora11g
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
.bash_profile edited for grid user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=+ASM
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/grid
export GRID_HOME=$ORACLE_BASE/product/11.2.0/grid
export ORACLE_SID=+ASM
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
When I log on as grid user. I check the followings:
[grid@orcl11g ~]$ crsctl check has
CRS-4638: Oracle High Availability Services is online
[grid@orcl11g ~]$ srvctl status database -d ora11g
Database is running.
[grid@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:17:37 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> select status from v$instance;
STATUS
STARTED
Till here everything seems to be OK!!!!
When I log as oracle user. I check the followings:
[oracle11g@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:21:46 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to an idle instance.
SQL> select status from v$instance;
select status from v$instance
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'
Also when I log on as a grid user again and use following commands to shutdown and start database again the STATUS of instance is again STARTED not OPEN.
[grid@orcl11g ~]$ srvctl stop database -d ora11g -o normal
[grid@orcl11g ~]$ srvctl start database -d ora11g
And also when I edit /etc/oratab file. I change N to Y for +ASM. But when restart system it seems not changed value is N again.
+ASM:/u01/app/grid/product/11.2.0/grid:N # line added by Agent
ora11g:/u01/app/oracle/product/11.2.0/dbhome_1:Y
NOW QUESTIONS!!!!!
1. Why I can't change the status of database to OPEN as grid user?
2. The status is always STARTED when querying v$instance. İs it status of +ASM or database?
3. When checking database as grid user it seems to be Database runnning... If running why it is not in OPEN state? What is running means here?
4. When I log on as oracle user and query v$instance, then error shown above occured. And also when startup the database then another error occured as in above. WHY?
5. When I edit /etc/oratab file manually why second row saved but the first one is changed after restart the system?
6. Normally, which user have to start, stop or manage database? I think that oracle user is necessary for managing database and the grid user is only for managing ASM and Oracle Restart.
PLEASE HELP ME TO SOLVE THIS CHAOTİC SİTUATİON!!!
Thanks,
DBA_84I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox)
Pl identify exact version of 11gR2 to 4 decimal places. As noted in your other thread - Failed to start oracle-ohasd, error: Inappropriate ioctl for device ohasd failed to start at roothas.pl - you will need a minimum version of 11.2.0.3 for Linux 6.x - using a lower version may result in unexpected issues or problems. -
Safari Crash / Could not open cookie file Cookies.plist for reading
Hi everyone
I dont know why my Safari is Crashing, I review the console and I find this line:
Help... I dont how to solve the problem...
*ntlmRand failed to open /dev/random
2007-01-26 23:48:55.004 Safari[8953] Could not open cookie file "/Users/scanner9/Library/Cookies/Cookies.plist" for reading.
2007-01-27 00:00:53.553 Safari[8953] Could not open cookie file "/Users/scanner9/Library/Cookies/Cookies.plist" for reading.
2007-01-27 00:01:16.915 Safari[8953] -[BrowserWindowController loadWindow]: failed to load window nib file '/Applications/Safari.app/Contents/Resources/English.lproj/Browser.nib'.
2007-01-27 00:01:16.923 Safari[8953] Cannot load Interface Builder file 'NSAlertPanel'
Thanks.jhpereze,
Quit Safari, find the Cookies.plist file in your Macintosh HD/Users/yourusername/Library/Cookies folder, drag it to your Desktop, log out/in or restart and let us know what happens.
If that is unsuccessful post your Safari crash log for further analysis.
;~) -
I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.
Have you tried restoring the Preferences yet?
-
When I try and open Photoshop, I get the following error "Could not open a scratch file because you do not have the necessary access privileges" followed by "could not initialize Photoshop because you do not have the necessary access privileges". As a result, Photoshop fails o open.
I have tried repairing Disk permissions, I have deleted the Photoshop Settings file, and I have tried Resetting Home Folder Permissions.
I am the primary user, and it's only my user account that has the problem. When I try and Reset Home Folder Permissions for my account, the process never completes. When I perform the reset for the other users, it takes seconds.
I've tried reinstalling Photshop, but still get the same error and Photshop fails to start.
I concerned this is the beginning of a worsening problem with OSX LION.
Any suggestions???Hi,
having the same problem here. We have 10 Mac Pro machines with OSX 10.6.8 and CS5 Photoshop 12.0.4. By now five of these machines have given the same error: "could not open scratch file because disc is not available" and "could not save ... because of a program error".
The scratch disk is the same one which has the system and it hasn't been touched.
I have repaired the disk permissions.
This just started two days ago and haven't noticed it before. Any clues what could be causing this?
Thanks,
Janne -
Could not open location 'file:///home/geoff'
I'm using Gnome and after the last update today ( I always do pacman -Syu everyday and accept whatever it gives me in my noobidity ):(
Now I find that when I go to Places--Home Folder and Places--Desktop I get this message.
Could not open location 'file:///home/geoff' (or 'file:///home/geoff/Desktop')
There was an error launching the default action command associated with this location
Have I done something stupid in accepting all updates without question? Or is it something else?
Can you put me on the right learning curve and fix this.
ThanksI think that the latest udev upgrade has caused the problem. Correct me if I'm wrong.
I did the same upgrade on my laptop and got the same fault.
Apart from the faults in my previous message if I open a terminal over any page I'm looking at, like this for instance, it will not stay "above" the page when the box "only on this workspace" is checked. I have to check "always on top" to make it stay so I can cut and paste things.
When the terminal is minimized in the bottom panel and I click on it, it comes up but the moment I move the mouse pointer to the terminal screen it disappears back to being minimized.
I've never had this weird behavior before.
Hoping someone can help
thanks -
Could not open the file in application server
Hi All,
I have a Zreport which will write files on application server. When I tried to download it is showing me "Could not open the file". And when checked again with /nal11 the files does not exist. When I ran the Zreport again the file exist in application server but unable to download. And when checked again the file doesnot exist. Why it is getting archived? Please help me.
Thanks,
VenkataHi Sagar,
Below is my file path : /dv2/tmp/instl/salesdata.txt
When I checked in the below path the file exists.
/dv2/tmp/archive/salesdata.txt
Solved the issue.
Thanks,
Venkata -
Web Intelligence report scheduling: Error "Could not open the file"
Hello,
we are on BO 4.0 SP9 Patch 1.
Since the update to this patch level we have intermittent failure of scheduled reports in Web Intelligence.
Error message is: "Could not open the file *.wid"
There has been neither a change of the report nor a promotion.
Former schedules finished successful.
SAP note search or SCN search only showed notes with the issue that this error occurs after a promotion.
Does anyone has experiences with this error?Hi Sebastian,
If Hot Back is enabled I would suggest turning this feature off unless it’s a business requirement.
In addition as a workaround in the reoccurring jobs set the number of retries to something greater than 0.
This issue was fixed in BI4.0 SP08, I would suggest opening an incident with support.
Hope the above helps
~Valdrin -
hi
i have manually created a database called ora.i have done all the relative tasks.i can open the database by startup nomount pfile.but when i try to create spfile from pfile, it is showing an error that it is already created.when i give the startup command the
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/10.2.0/db_1/dbs/initora.ora'
above error occurs.acutally my pfile is in another location and it is trying to open it from another loc.ihave added the line
export ORACLE_SID=ora in bashrc file.Already there is one database called orcl and it is also been added to the
bashrc file.
Pz solve it for me.hi,
>
create spfile='/u01/app/oracle/product/10.2.0/db_1/dbs'
2 from
3 pfile='/u01/app/oracle/product/10.2.0/db_1/admin/ora/pfile/initora.ora';
create spfile='/u01/app/oracle/product/10.2.0/db_1/dbs'
ERROR at line 1:have you startup the database in nomount stage with pfile.. if so.
then
create spfile form pfile='/u01/app/oracle/product/10.2.0/db_1/admin/ora/pfile/initora.ora';
use this command
a spfile will be created inside /dbs/
now restart the DB and give startup command and check the instance status..
as mentioned above export the Oralce_home and Oracle_sid..
regards,
Deepak -
LRM -00109:could not open parameter file Oracle 10g in Solaris 10
Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Thanks4joey1 wrote:
Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
By default, oracle will look first for a spfile named "spfile<ORACLE_SID>.ora". Lacking that, it will try to find "init<ORACLE_SID>).ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Once you have started the db (I believe a startup nomount will be sufficient) you can issue CREATE SPFILE ... Details are in the fine SQL Reference manual found at tahiti.oracle.com
BTW, "open" is the default behavior of "startup", so no need to specify it. A simple "startup" does the same thing.
Thanks -
Adobe Captivate could not open "the file" Ensure that:
Brand spanking new installation of the trail version of Captivate 5.5.
Try to open a file a client sent to me.
Receive message
Adobe Captivate could not open "the file" Ensure that:
-The files is not open already
- The file is not damanged.
-The hard disk has suffecient available space
-The system has suffeicent resources.
Researched the blog and tried 2 suggestions:
1. Clearing the cache. Did not work. I do not have a cache folder. I haven't created a Captivate 5.5 project. I'm just trying to open a file sent to me.
2. Tried deleted bak file. Didn't work. Captivate 5 keeps recreating the file.
Other facts:
Other people have been able to download the trial version and open the file.
I have Captivate 4 on my machine.
Any suggestions?
ThanksI'm experiencing about the same problem:
I made a software demo using Macromedia Captivate on computer 1 en sent it by e-mail to computer 2.
On computer 2 I installed a Captivate 5.5 trial and I want to open the file in 5.5.
The file is not locked as far as I know (I right-clicked the file > properties > unlock)
I do have sufficiënt available space and resources. The file contains 135 slides but is not too large as I tried to do the same thing with a 50-slide file > same error message.
I tried creating a new blank project > I copied the slides into the blank project, saved again on a local drive, sent it to computer 2 again, but same error message.
Please help, I'm getting desperate.
Marieke -
"could not open scratch file because disc is not available"
Help. I am running a new photoshop CS5 (12.0.4) on a new I-mac running 10.7.1
The program seem to load and authorize correctly but when I try to open it I get 2 sequential error statements
"could not open scratch file because the disc is not available"; then
"could not initialize photoshop because the disc is not available"
Where do I start?Hi,
having the same problem here. We have 10 Mac Pro machines with OSX 10.6.8 and CS5 Photoshop 12.0.4. By now five of these machines have given the same error: "could not open scratch file because disc is not available" and "could not save ... because of a program error".
The scratch disk is the same one which has the system and it hasn't been touched.
I have repaired the disk permissions.
This just started two days ago and haven't noticed it before. Any clues what could be causing this?
Thanks,
Janne -
HT3775 I could not open video file name with .flv
I could not open video file name with .flv Please help to advise?
Install Perian or use VLC.
(86537)
Maybe you are looking for
-
Looking for specific case for iPod touch to
I saw this awesome case for an iPhone, it was pretty thick, made of rubber I think. The feature that blew me away was that in the back panel of the case was a place to wind up the ear phone cord, and two notches for the ear buds to snap in, and they
-
Safari and Adobe Reader Plug-in
Hello, Because of some weird setup on the web site where I was getting the PDF file from, I had to get Adobe Reader Plug-in. I downloaded it, installed, everything seemed fine. But - still no plug in. Looked in ~/library/Internet Plug ins, nothing th
-
I purchased an 8 minute music track on itunes which only downloaded about 22 seconds. It does not give me the option to re-download what I purchased on itunes, only to play it - so it only re-plays the partially downloaded track. I know the full trac
-
Data Source - Alias Not Found in SDK Sample Application VIDS
Hi, I am trying to run SDK sample application VIDS. In the function, BindDataToForm, I am getting error at line: oColumn = oColumns.Item("CardCode") oColumn.DataBind.SetBound(True, "@VIDS", "U_CARDCODE") The error is: Data Source - Alias Not Found I
-
Suggestions for visualizing the temporal or calendar based patterns in c#
Hello Everybody, In my console application, I am searching for specific Patterns in existing database. If any pattern found , then it will write into seperate table with some Details. Now, I want to visualize those Patterns. Could someone suggest me