Could not Parse the Request

Hello Friends,
We have created VC models which has Html views and form view in it and
each model is attached to a timer and is set to 30mins.
In one of the models ("RFS_XXX.gml") I am
getting popup of the error as "Could not parse Request" and the model
is not getting refreshed after 30mins.
Please let me know if anyone has any thoughts on this.
Thanks
Edited by: Costa Chertakovsky on Jun 23, 2008 9:39 PM

Hi ,
u have set time in ur bapi right .
then u have go to -> options -> Compiler -> check the drop down -> select get latest .
Regards ,
venkat

Similar Messages

Error Message: Could not Parse the Request

Hello Experts,
I am getting the following error in one of my VC models on the portal when the portal is idle for some time.
Could not Parse the Request
I have a timer attached to this model and is set for 30mins.
Please let me know if anyone has any thoughts on this.
Thanks,

Shalom Guy,
I'm getting this kind of error "Could not parse request" after 30 min.
The design like this: I have in the VC model Timer which is fire my event (every 30 min) and executing
Data Service Web service -> ivies to -> HTML View.
Than we deployed VC model into the Portal (VC Model -> iView-> Page)
I am getting popup of the error as "Could not parse Request" and the model
is not getting refreshed after 30mins.
Please let me know if anyone has any thoughts on this.
Appreciate your help.
Thanks
Costa

'Could not find the requested node error' when guests join the meeting room

I am working on a program where the owner would allow guests after they knock to enter the meeting room. Upon acceptance, they would also be permitted to publish/subscribe audio.
My ' meeting owner' application code is an adaptation of the Knocking Queue example. The 'owner app' code has the following settings in its creation complete.
// Require that guests must knock.Note that this line changes the setting of your room so that in future anyone guest coming in
// has to knock.
cSession.roomManager.guestsHaveToKnock = true;
//Enable autopromote
cSession.roomManager.autoPromote =
true;
I get an error when the owner logins in first and accepts the guest into the meeting room.
   // Event handler function for displaying the selected Alert button.
            private function alertClickHandler(event:CloseEvent):void {
             var queue:Array = pendingArray;
             if ( cSession.userManager.myUserRole == UserRoles.OWNER ) {
      var item:Object = pendingArray.shift();
      trace (item["label"]);
      trace (item["descriptor"].userID);
               if (event.detail==Alert.OK)
                //Admit user for chatting
       cSession.roomManager.knockingQueue.acceptUser(item["descriptor"].userID);
       //Allow user to publish audio - supposed to be promoted through room setting
       //audioPub.setUserRole(item.descriptor.userID, UserRoles.PUBLISHER);
      else //if (event.detail==Alert.CANCEL)
       cSession.roomManager.knockingQueue.denyUser(item["descriptor"].userID);
The 'client' application throws the following error.
SWF] C:\Documents and Settings\a246216\My Documents\Flex Builder 3\Client Chat Tool\bin-debug\ClientChatTool.swf - 1,572,471 bytes after decompression
AFCS Beta Build # : 0.92
requestInfo http://connectnow.acrobat.com/fidelity2/ramr?guk=ZzprOg==&mode=xml&x=0.011843591462820768
Getting FMS at https://na2.connectnow.acrobat.com/fms?ticket=1468amkp7k35g, attempt #1/3
result: <fms>
<origin>fms2.acrobat.com</origin>
<proto_ports>rtmps:443</proto_ports>
<retry_attempts>2</retry_attempts>
</fms>
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 protocols: [object ProtocolPortPair]
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 [attempt 1 of 2] Connecting to 0/0: rtmps://fms2.acrobat.com/cocomo/na2-sdk-825d634c-46ed-4ed3-aa58-7450f0f7e36a/ramr #startProtosConnect#
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 tempNetStatusHandler 0/1,NetConnection.Connect.Success
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 isTunneling? false
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 is using RTMPS? true
RECEIVED LOGIN AT SESSION
.user descriptor from server [object]
    .displayName [string]= k
    .userID [string]= GUEST-110858C2-4F16-4FE8-BF2C-D572F915FEC5
    .affiliation [number]= 5
    .role [number]= 5
RECEIVENODES UserManager
receiveAllSynchData UserManager
checkManagerSync:[object UserManager]
RECEIVENODES FileManager
receiveAllSynchData FileManager
checkManagerSync:[object FileManager]
RECEIVENODES AVManager
receiveAllSynchData AVManager
checkManagerSync:[object StreamManager]
RECEIVENODES RoomManager
receiveAllSynchData RoomManager
checkManagerSync:[object RoomManager]
RECEIVENODES Chat
receiveAllSynchData Chat
Error: Could not find the requested node.
at com.adobe.rtc.sharedModel::CollectionNode/getNodeConfiguration()[C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:394]
at com.adobe.rtc.sharedManagers::StreamManager/getNodeConfiguration()[C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:577]
at com.adobe.rtc.collaboration::AudioPublisher/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\collaboration\AudioPublisher.as:1009]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::StreamManager/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1410]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveCascadingUserRole()[C: \work\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:813]
at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveUserRole()[C:\work\mai n\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:715]
at com.adobe.rtc.session.managers::SessionManagerBase/receiveUserRole()[C:\work\main\connect \cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
The above error is thrown just when the 'guest' is accepted into the meeting room. The guest has not published anything at this point.
The chat part is working fine.
I have tried different ways to resolve this issue but I am not getting anywhere. I have tried different things. Your help is appreciated.
Ram

It is win 7 64 bit system and same error on Illustrator x86 and x64.

FIM Export Fails - Fault Reason: The endpoint could not dispatch the request. FIM Account Issue?

Hi,
I have 3 fim servers:
fimportal - has fim service & portal running (uses account service.fim & service.sharepoint)
fimsync - has synchronisation service & synchronisation DB (uses account service.fimsync)
fimsql - holds portal DB for server fimportal
I've created an AD MA, FIM MA and an inbound AD sync rule. On my FIM MA I've used account svc-fim (i.e. the account I've used to install FIM). This is not the same account that runs the synchronisation service on fimsync (account svc-fimsync is used
for this).
I've ran a FIM MA import and full sync without issue (I can see my built in, admin account and the sync rule brought into the metaverse). When I do an export I receive an error as shown below.
What I'm not sure about is if it's because I'm using the wrong account for the FIM MA. If so, which account should I use and what's the best way to change my config (without a total reinstall)?
I've selected domain (as a text value), accountname and objectsid in my attribute flow, but I may have configured something wrong here.
Thanks
Fault Reason: The endpoint could not dispatch the request.\r\n\r\nFault Details: <DispatchRequestFailures xmlns="http://schemas.microsoft.com/2006/11/ResourceManagement" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DispatchRequestAdministratorDetails><FailureMessage>Exception:
Other
Stack Trace: Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.Data.SqlClient.SqlException: Procedure or function 'GetDomainConfigurationIdentifiersFromDomain' expects parameter '@domainName',
which was not supplied.
   at Microsoft.ResourceManagement.Utilities.ExceptionManager.ThrowException(Exception exception)
   at Microsoft.ResourceManagement.Data.Exception.DataAccessExceptionManager.ThrowException(SqlException innerException, TransactionAndConnectionScope scope)
   at Microsoft.ResourceManagement.Data.DataAccess.GetDomainConfigurationIdentifiersFromDomain(String domainName)
   at Microsoft.ResourceManagement.ActionProcessor.DomainConfigurationActionProcessor.AddDomainConfigurationFromDomain(CreateRequestParameter domainNameParameter, RequestType request)
   at Microsoft.ResourceManagement.ActionProcessor.DomainConfigurationActionProcessor.DoRequestCreationPreProcessByAttribute(RequestType request)
   at Microsoft.ResourceManagement.ActionProcessor.ActionDispatcher.DoRequestCreationPreProcessByAttribute(RequestType request)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean
isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier, UniqueIdentifier requestContextIdentifier, Boolean maintenanceMode)
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Put(Message request)
   --- End of inner exception stack trace ---</FailureMessage><DispatchRequestFailureSource>Other</DispatchRequestFailureSource><AdditionalTextDetails>Request could not be dispatched.</AdditionalTextDetails></DispatchRequestAdministratorDetails><CorrelationId>0c7141ca-63a2-42ae-92c3-a0c95de0d940</CorrelationId></DispatchRequestFailures>
Below shows separate MA account and separate FIM Sync Account
IT Support/Everything

Hi Tomek,
Apologies for the delay, been a busy festive period :-)
The account in question with the export flow error is my admin account that I used during installation (where prompted I did enter service account credentials).
Searching the FIM CS on the source object details show all attributes present (including domain), but looking at the export attribute flow shows a final value of deleted! See below.
I'm following the TechNet guide:
http://technet.microsoft.com/en-us/library/ff686264(v=ws.10).aspx and hit the error with the FIM MA export run profile when I run the below steps:
FIM MA - Full import
FIM MA - Full synchronization
FIM MA - Export
FIM MA - Delta import
AD MA - Fullll import
AD MA - Full synchronization
Initially my admin account was not in the selected containers as configured in the AD MA, however I've now ran that and re-ran the sync, which resulted in my test user being provisioned in the portal. My admin account is still not provisioned - I now get
2 export errors, 1 as before complaining of missing domain and another which complains of my admin account being a duplicate entry.
Please let me know if anything comes to mind.
Thanks
IT Support/Everything

Illustrator CS6 and CC can't finish previewing. could not complete the requested operation

This is happening in both Illustrator CC and CS6 on 2 x imacs, one macbook pro and one macbook air.
Can anyone help with this issue.....it's doing my head in. When it does this it reverts to outline view and when going to preview mode it comes up with the error.

We use Illustrator for package design. The files are quite complicated.
Recently we are experiencing extreme lag on Ai files. In some cases we get wierd stair stepping and duplicate pixel studdering across the monitor as we mouse over the art in preview mode. Sometimes get a "Can't finish previewing. Could not complete the requested operation." message.
How much RAM/Resources do we need to run this bloated software?
Trimmed most installed user/library fonts. Universal Type Server only opens required fonts.
Current system(s) is OS 10.8.4
27 inch iMac 3.4 GHz Core i7
32GB Ram 1600 MHZ DDR3
thx
paul

Can't finish previewing. Could not complete the requested operation

So, I am working on a large and complex document in AI CC 2014, and periodically this message ("Can't finish previewing. Could not complete the requested operation") pops up and drops me into outline mode. I can work around it by hiding some parts of the illustration or changing zoom, so it looks like a resource issue. But what resource? RAM doesn't seem likely: I have 32 GB or memory, 400 GB of free disk space for paging, and the Mac Activity Monitor shows no sign of memory pressure. (Illustrator is only using 1 GB). So what's going on? Is it a graphics hardware issue? I don't have the latest or greatest: my iMac has an AMD Radeon HD 6970M with 1 GB. Is that the problem? Would a new computer help, or is it some internal thing with Illustrator and a new computer would be a waste of money. The error message is completely uninformative as to the cause of the problem. Does Illustrator CC have a log file or any other source of info?
System summary:
Mac Illustrator CC 2014
27-inch iMac, Mid 2011
3.4 GHz Core i7
32 GB RAM; 400 GB Free Disk Space
AMD Radeon HD 6970M 1 GB
Error Message:
"Can't finish previewing. Could not complete the requested operation"

Hikrzy1314
Will it be possible for you to share the source files with [email protected] ?
I would like to have a look into this issue.
Thanks & Regards,
Raghuveer Singh

Can't open the illustration. Can't finish previewing. Could not complete the requested operation.

Recently, I restarted my MAC and I'm not able to place images in AI or open AI files with images.
Sometimes when I do place a jpg, it just shows a box.
Some errors include:
• This file is not readable.
• Can't open the illustration.
• Can't finish previewing. Could not complete the requested operation.

As Monika said, we need info about the file and exact system info. Sounds like the files are damaged or locked at the operating system level, which in turn could indicate file system issues....
Mylenium

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

Could not parse the file contents as a data set. There were too many variable names in the first line of the text file.

What are the Variables settings, what is the text file’s content, …?

"Could not complete the requested operation" error

I've searched and read several threads on this topic, but the behavior I'm seeing here seems different.
I'm using AI CS2, XP.
Try to start AI. It immediately shuts itself down, no error message.
I close Firefox.
Try to start AI. "Could not complete the requested operation." And shuts down.
I close MSIE.
Try to start AI. "Could not complete the requested operation." And shuts down.
Closed Acrobat.
Started AI and it worked for a while, but stalled later -- I could not select the Window button at the top or any other buttons. Performance became sluggish. Did not close AI ...
Closed InDesign.
After that, AI has been working fine. Even though I reopened MSIE.
Could the problem be something in my memory/swap file/whatever settings?
I had the same problem on my old PC, but I thought it was a memory issue since I only had 1.5 GB of RAM (I had adequate, although not excessive, hard drive space). But this is a new computer with 3GB of RAM, a zippy processor, and I have tons and tons of empty hard drive space.
If not memory, could it have something to do with files that are in use when any of those other apps (Firefox, etc.) are running? (Not that I'd know how to do anything about it.)
AI is the only app that behaves this way. Normally I can run ID, PS, Firefox, MSIE, Word, Quark, Acrobat and Eudora at the same time with no noticeable performance problems. And I do this on a daily basis.
I've tried deleting the prefs file, but the problem keeps happening, so I don't think it's prefs. And I see from my reading that a corrupt font might be the culprit, but how often does anyone get a corrupt on PC?? I think I've had a corrupt font once in all the years I've been doing DTP on PC.
Anyway, all my fonts seem to work just fine, so I don't know how I'd know if one was corrupt.
I'm open to suggestions. I hate having to shut down a bunch of apps just to run AI.
TIA,
Marlene

Hi Len,
How are ya?
Nope, I didn't reuse RAM (or anything else) from the old PC. Everything is brand new. I wanted to keep the old PC completely intact (as a backup).
I hadn't patched AI or ID, so I did that. Then I opened a bunch of apps and tried to start AI, but got the "Could not complete the requested operation" message again.
Had to shut down an app (Nero, FWIW) to get AI to start. At the time, about half of my RAM was in use, my PF usage was 1.29 GB, and CPU usage was very low (like 3%).
AI is running now. But I'd still like it to run whenever I want, with no squawking about requested operations.
And yes, I had the same problem on the old PC. One big advantage of the old PC is that I still have old versions of everything (AI, PS, ID) installed, so when AI 12 refused to start, I'd just use the previous version.
But I didn't install any old versions of Adobe software on the new PC, just CS2.
OT: Should I also update PS? Apparently I haven't done that either.
Fontessa

Illustrator cs6 Can't open the illustration. Could not complete the requested operation.

Hi guys
I'm struggling with my Illustrator CS6. I hope you will help me.
When I try to open my project it says "Can't open the illustration. Could not complete the requested operation." After clicking ok my project is loaded WITHOUT one layer. I sacrificed a lot of time doing it and i don't want to start it over again. None of the ways to open it as older version of program work. I know that it can be recovered, because when I open the same project in After Effects all layers are loaded properly. If somebody know how to solve this problem please let me know asap.

Thanks, Monica, Ryan, and Mike. It helps to know that this is the best I'm likely to get, so I don't waste more time looking for a better solution.
I was able to place the file, then simply redraw or retype the broken parts on top of the placed art. Often, I could click into the placed art and copy contents from it. For type, though, I had to retype whatever got broken.
Since I posted my 1st comment here on Dec. 5, it happened to me again. Again, I had to reconstruct parts of it, the same way.
Sometimes, I save a file without PDF compatibility enabled, just to make it save more quickly. I'm glad I didn't do that with this file.

Error: "Could not complete the requested operation" when you start Illustrator CS2 (Windows XP)

Hi everybody i'm nick from KL Malaysia, i having a problem with my Illustrator CS2 problem can't solved it, someone can help me?
My problem is when i open lllustrator after load finish the file thn will come out Error: "Could not complete the requested operation", i dunno y?
Have someone same problem with me anot? got any stion to solved it?

Nick,
The first thing to try is to
a) Ctrl/Cmd+Alt/Option+Shift during startup,
or (if a) does not work)
b) Move the folder
a) is easy but irreversible, b) is more thorough and reversible, so if you like your settings and do not want to destroy them in vain, use b).

Illustrator CC 2014 won't launch (Could not complete the requested operation) even after fresh install (3 times), anyone know how to solve? (Windows 8.1)

Hi guys, my Illustrator CC 2014 won't launch, getting an error message "Could not complete the requested operation", this is not a specific file issue I can't launch Illustrator stand alone. I've un-installed and re-installed about 3 times and contacted support but they haven't been able to solve as of yet. It's a relatively fresh install of windows 8.1 and no custom fonts have been added. I've tried deleting the preferences folders and launching and that has not had any effect. No idea what else I can do, any help would be greatly appreciated.
Edit: Forgot to mention I have also tried running Illustrator as administrator and that Illustrator was running perfectly fine on this computer since install (about 2 weeks) before this started happening.
Thanks
Chris

Hi Jacob, I decided to completely remove the entire creative suite from my computer, ran the cleaning tool (although some errors showed in the log file) and it now works! Let's just pray it stays this way haha. Thanks for the suggestion.
Log File:
[Thu Mar 05 10:18:58 2015] Choose from one of the following options to clean up :
[Thu Mar 05 10:18:58 2015] 1. All
[Thu Mar 05 10:18:58 2015] 2. Adobe Flash Player 10.2
[Thu Mar 05 10:18:58 2015] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
[Thu Mar 05 10:18:58 2015] 4. Creative Cloud 2014 only
[Thu Mar 05 10:18:58 2015] 5. Creative Cloud only
[Thu Mar 05 10:18:58 2015] 6. CS6 only
[Thu Mar 05 10:18:58 2015] 7. CS5-CS5.5-CS6
[Thu Mar 05 10:18:58 2015] 8. CS5-CS5.5
[Thu Mar 05 10:18:58 2015] 9. CS3, CS4
[Thu Mar 05 10:18:58 2015] 10. Adobe Id credentials
[Thu Mar 05 10:18:58 2015] 11. Quit
[Thu Mar 05 10:18:58 2015] Choice :>
[Thu Mar 05 10:19:00 2015] User selected: All
[Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Mar 05 10:19:00 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
[Thu Mar 05 10:19:00 2015] List of products installed on this machine
[Thu Mar 05 10:19:00 2015] Listing products for cleanup:
[Thu Mar 05 10:19:00 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
[Thu Mar 05 10:19:04 2015] Are you sure you want to clean all the listed products and associated files?
[Thu Mar 05 10:19:04 2015] Type (y) to confirm and remove or (n) to quit ... >>
[Thu Mar 05 10:19:06 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
[Thu Mar 05 10:19:06 2015] OSVersion : 64-bit
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:Adobe Creative Cloud
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Run value:AdobeCEPServiceManager
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsManifestBaseURL
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:SmsUpdateCheckInterval
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Adobe\CSXS.4 value:LogLevel
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegOpenKeyEx', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKLM key:Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AAM
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.1
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] Deleting registry root:HKCR key:AdobeAAMDetect.AdobeAAMDetect.2
[Thu Mar 05 10:19:06 2015] Exception during deleting key : (2, 'RegDeleteTree', 'The system cannot find the file specified.')
[Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\Users\Public\Desktop\Adobe Creative Cloud.lnk
[Thu Mar 05 10:19:06 2015] ACC shortcut was not found C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Creative Cloud.lnk
[Thu Mar 05 10:19:06 2015] CoreSync custom hook not found
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Retry deleting the folder since folder still exists
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Some files could not be cleaned up. Please try closing your internet/web browser, and rerun the Cleaner Tool to complete your clean-up.
[Thu Mar 05 10:19:06 2015] :: Cleaning-up left over inventories ::
[Thu Mar 05 10:19:06 2015] Inventory: 'AdobeApplicationManager-1.0' Type: SelfUpdate, Action: NoDelete
[Thu Mar 05 10:19:06 2015] Found AAMref : ACC.aamref
[Thu Mar 05 10:19:06 2015] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: True
[Thu Mar 05 10:19:06 2015] Removing content of Product : CS5Installer, Version : CS5
[Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Mar 05 10:19:07 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] LOG FILE SAVED TO: C:\Users\Chris\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
[Thu Mar 05 10:19:07 2015] Adobe Creative Cloud Cleaner Tool completed successfully
[Thu Mar 05 10:19:07 2015]
[Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:06 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:06 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] Warning: Failed to remove file,folder trying again
[Thu Mar 05 10:19:07 2015] Warning: Failed again to remove file,folder
[Thu Mar 05 10:19:07 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Mar 05 10:19:07 2015] ---------------------------------------------------------
[Thu Mar 05 10:19:07 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Thu Mar 05 10:19:07 2015] ---------------------------------------------------------

Illustrator CS5.1 will not open on OS X Lion 10.7.5 - "Could not complete the requested operation."

Out of the blue, I can't get my Illustrator CS5.1 application to open. Instead the app icon bounces on the dock and the message "Could not complete the requested operation." appears.
I have tried restarting the application, restarting the computer, I have tried holding Command+Option+Shift while opening, I have tried various methods of editing the "Adobe Illustrator CS5.1 Settings" folder, I have tried moving other application folders and font folders, all without success.
The application is installed on a computer in my office and was installed as a downloadable upgrade to CS4. I was thinking a solution might be to install Illustrator, but I haven't been able to find a link to the CS5 program downloads.
Today I tried to get help from Adobe Customer Support, who informed me that they no longer support CS5 and directed me to the forums instead. Any solutions???

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Could not submit the request to create database 'Name'.

Hi,
I had pay-as-you-go subscription. After getting Bizspark subscription, I took backup of database and website. I disabled pay-as-you-go subscription.
When I tried to create MS SQL Server database, it is giving me "Could not submit the request to create database 'EutheniaDB'. Failed to create the database server." error.
When I am trying to create new Website with SQL Server database it is giving me same error. But when I create a new website without SQL Server it is creating successfully.
Does anyone have face similar problem? Am I forgetting something to configure?
Please help!
Regards,
Suraj Raut

Hi,
It could be an issue with your subscription.
I would request you to check with
Billing Support. There is no charge to it.
Regards,
Mekh.

Getting this message when opening CS4 illustrator "could not complete the requested operation"

Afternoon all, Simply put someone in my art dept is suddenly getting this message "could not complete the requested operation"
when trying to open CS4 Illustrator. I am running Windows 7 Professional 64bit. CS4 is completely up to date. And Photoshop and other applications are working as they should. Have restarted, Tried moving the Users\Appdata\Roaming and Local\Adobe\ Folders to the desktop but it didnt help. Any and all suggestions would be greatly appreciated.
Thanks AaSib

Thanks for the suggestions. Tried them all this morning and none of them worked. I
have decided to deactivate, and uninstall/reinstall. Hope
fully that will work. Again thanks for the help.
Well I deactivated and uninstalled. Ran the cleaner, and Illustrator is still not working. Going to try a system restore within windows 7 to see if something could have messed with the program.
AaSib

Could not Parse the Request

Similar Messages

Maybe you are looking for