Could not paste the following strings from the clipboard into presentation mode key

I can run an Analysis query and from the Prompts screen I can Copy and Paste a list of values to 0gl_account without any issue.
When I try to use the Display Panel Filter or Filter from the Analysis ribbon and paste the values to the same dimension I get this error message.
Any ideas would be welcome!

Hi Martin,
Yes GL is compounded by Controlling area - I have a fixed filter on that in my query already. I was able to paste in Text but not Keys for some reason.
The upgrade has resolved my issue, thanks for taking the time to make your suggestion.
Regards
Gill

Similar Messages

CS6 PSD Could not export the clipboard because it is too big to export

I have been getting the error "Could not export the clipboard because it is too big to export" since upgrading to CS6. The same files at the same bit depth on the same computer do not cause this error in CS5.
In fact, I can open a file in CS5, copy it, and paste it into CS6 with no trouble. If I then copy again within CS6 and leave the program, I am given the error. (As a note, I have not run these programs simultaneously, except to run this test.)
This error appears regardless of whether Photoshop CS6 is running alone, or with several apps.
The Raw files are from a Canon 5D mark ii and tend to be 20-25MB in size,
I am running a Mac Pro 2.8GHz Quad Core Intel with 24GB of RAM. I have set the preferences to allocate 70% of this RAM, which should be sufficient. Changing the allocation to 90% or 100% has no effect, nor does adjusting the tiles configuration. My scratch disks have 130GB and 500GB free.
How do I correct this problem?

Hi, FYI, To duplicate a layer on top of itself, use Command+A, Command+J (jump the layer) if you need part of it, make a selection instead of a Command+A, this will also avoid the clipboard, and use Photoshop's scratch disk instead.
(I don't know why you run into that issue in CS6 and not in CS5, so I try to give you useful workarounds)
I'm not talking about bigger tiles, but of unlimited clipboard size that you find here for CS5: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4965
But are not listed here for CS6: http://helpx.adobe.com/photoshop/kb/plug-ins-photoshop-cs61.html#id_68969?PID=3350462
Maybe did you install it in CS5, but forgot all about it?

PS CC 14 OSX 10.9.4 "Could not export the clipboard.." issue

I have dreaded "Could not export the clipboard because it is too big to export" issue.
Trying to past from Photoshop to InDesign with the latest CC versions.
I've done this a million times in previous versions and now find myself cursing for upgrading to CC 14.
I literally can't work without the ability to copy and paste between adobe applications.
Anyone have any ideas? (all I could find on here was a windows registry fix for an older version of the software -- not helpful)

I don't know what the differences are between CS6 and CC in copying and pasting. What I do know is that if you are trying to images that are large enough to generate that error, you are on your way to creating a bloated InDesign document that will be slower to process, and more prone to corruption.
Copy and paste embeds the image into InDesign; placing it creates a link to the image file. When you place a file, it is easier to go back and edit it, too.
The easy fix to your problem is to save and place, but you don't want to hear that.

"could not start the Oracle BI Presentation Server on Local computer error"

Hello Folks,
i am trying to start the OBIEE Presentation services, The OBIEE server and Java Host Services are started.
i am getting this error and i didnt change any settings and finally getting this error
"Windows could not start the Oracle BI Presentation Server on Local Computer. For more information, review the System Even Log. If this is a non Microsoft service contact the service vendor, and refer to service-specific error code -1."
thanks

Here is the solution from another freind
1. Stop BI Server Service > Start BI Server Service > Start BI Presentation Service. If that doesn't work...
2. Restart machine and follow step 1. If that doesn't work...
3. Check instantconfig.ini file and check syntax is correct. Also check java directory path mentioned is the valid one. If that doesn't work...
4. Rename the catalog folder to something else and follow step 1. It will create new catalog folder. Then copy _Shared from old catalog folder and you are good to go.
catalog folder will be in oraclebidata/web/catalog...
either delete the folder and create a new empty one or rename it
also have a look at instanceconfig.ini file
thanks

I want to paste image in a from a clipboard into any canvas

i want to paste image in a from a clipboard into any canvas

Yeah, well I want to win the lottery :=)
You should check out the stuff in java.awt.datatransfer That package has info on how to do this sort of thing, as well as ClipBoard objects + the like.

Getting "could not export the clipboard because of a program error"

The above error just started recently when I do cntl A to select all the cntrl C to copy.
I am trying to add photos to the background photo as additional layers.

I don't know why there is an error but you may be able to prevent it by disabling clipboard export in preferences.

Could not complete the command because of a problem using the Adobe Colour Engine??

When I am playing back a set of recorded actions, I receive a message that says "Could not complete the command because of a problem using the Adobe Colour Engine". This occurs after I copy a part of an image to paste it onto a new file. It occurs during the "Make" part(making a new file) and I was just wondering how to fix it.

It's a known (but esoteric) bug in Photoshop CS5 and earlier, seen with grayscale images. It used to crash utterly, but after I reported it I think they patched Photoshop 12.0.something to avoid the crash. However, the step still fails when you make a new grayscale image in an action.
I saw it because I created an action to paste the clipboard into new document, all in one motion. It virtually always works as long as I have a colored image in the clipboard. But not grayscale.
One workaround, which is not particularly convenient, is to turn on prompting for the Make new image step. I haven't used this workaround for a while, but it used to be that if you confirmed the "File New" operation manually it would continue and work. I don't know if the workaround is still valid.
-Noel

I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental "A Thousand Words" because it is authorized to play on another computer or device." any ideas?

I am getting the following error during the play of a rented movie from my MacBook that i am trying to watch on AppleTV Could not play the rental “A Thousand Words” because it is authorized to play on another computer or device." any ideas?

Rentals can only play on one device/computer at a time. Have you tried to play on the computer and still have that window open?
Have you transferred the rental to iPod/iPhone or iPad to watch?
If it won't play anywhere contact iTunes support at:
expresslane.apple.com
AC

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue

Marc-
The Safari message is probably telling the truth. Is the problem repeatable at several websites, or is it only with a particular one? If all websites, you may have trouble with your internet connection downloading large amounts of data. Mail messages are relatively small unless there are attachments or embedded images.
Fred

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is apprciated

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...

Yes. I've found that works best. Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth. Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full. So unfortunately there is a lot of empty space that is needed for smooth operation.

Could not complete the paste command because the icc profile is invalid

Hi. In PS CS4 & AI CS4.
I get the following error when I try to copy & paste a logo from Illustrator into Photoshop:
could not complete the paste command because the icc profile is invalid
I don't understand because the color settings are sychronized. I do this all the time. I have not received this error before.
Thanks.

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
We have an exisiting .NET MVC project which uses crystal reports versions 2008 (dlls of version 12.0.). No we have Crystal Reports 2011 for.NET SDK is installed and I've updated all the crystal related dlls (Enterprise.Framework.dll, CrystalDecisions.Chared, CrystalDecisions.Web ...) to newer version which is 14.0. After this upgrade, when I run application, I am getting the following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)]
   System.Reflection.Assembly._nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +0
   System.Reflection.Assembly.nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +40
   System.Reflection.Assembly.GetTypes() +28
   System.Web.Mvc.TypeCacheUtil.FilterTypesInAssemblies(IBuildManager buildManager, Predicate`1 predicate) +161
   System.Web.Mvc.TypeCacheUtil.GetFilteredTypesFromAssemblies(String cacheName, Predicate`1 predicate, IBuildManager buildManager) +63
   System.Web.Mvc.ControllerTypeCache.EnsureInitialized(IBuildManager buildManager) +115
   System.Web.Mvc.DefaultControllerFactory.GetControllerTypeWithinNamespaces(RouteBase route, String controllerName, HashSet`1 namespaces) +58
   System.Web.Mvc.DefaultControllerFactory.GetControllerType(RequestContext requestContext, String controllerName) +634
   System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +58
   System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118
   System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46
   System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63
   System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13
   System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8770194
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
We have another ASP.Net project, which is working fine after I update older crystal dlls to newer ones. This project is working fine.
Thanks in advance

This error I am getting, after I update the "CrystalDesicions.Web.dll" from version 12 to 14.0. Any I dea on this?
After, I verified with fusin log and ProcessMonitor, they are reporting on this:
path to BusinessObjects.Licensing.KeyCode.Decoder.dll is not found. Does this dll is used by CrystalDecisions.Web.dll?
and I don't have any mixed reference.
Any help?

MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe" - Deploying from Linux

Hi there, I'm facing the following error when deploying node.js application to azure websites. I have read enough articles which points me to install visual studio. I'm on a linux desktop and i'd like to use the git to deploy website. I tried changing to
.NET 3.5/4.5 in the config but no help there. I've enabled python 2.7 aswell I have added the following to the query string to the handler_mappings in the portal but it isn't working. How do i go about fixing the same?
PATH C:\Program Files\Microsoft Visual Studio 9.0\VC\vcpackages
remote: Using start-up script server.js from package.json.remote: Generated web.config.remote: The package.json file does not specify node.js engine version constraints.remote: The node.js application will run with the default node.js version 0.12.0.remote: ..................................remote: remote: > [email protected] install D:\home\site\wwwroot\node_modules\mariasqlremote: > node-gyp rebuildremote: remote: remote: child_process: customFds option is deprecated, use stdio instead.remote: D:\home\site\wwwroot\node_modules\mariasql>node "c:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\node-gyp-bin\\..\..\node_modules\node-gyp\bin\node-gyp.js" rebuild remote: Building the projects in this solution one at a time. To enable parallel build, please add the "/m" switch.remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! build error remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack Error: `msbuild` failed with exit code: 1remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at ChildProcess.onExit (c:\Program Files (x86)\npm\2.5.1\node_modules\npm\node_modules\node-gyp\lib\build.js:267:23)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at ChildProcess.emit (events.js:110:17)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:1067:12)remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! System Windows_NT 6.2.9200remote: MSBUILD : error MSB3428: Could not load the Visual C++ component "VCBuild.exe". To fix this, 1) install the .NET Framework 2.0 SDK, 2) install Microsoft Visual Studio 2005 or 3) add the location of the component to the system path if it is installed elsewhere. [D:\home\site\wwwroot\node_modules\mariasql\build\binding.sln]remote: gyp ERR! command "node" "c:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"remote: gyp ERR! cwd D:\home\site\wwwroot\node_modules\mariasqlremote: gyp ERR! node -v v0.12.0remote: gyp ERR! node-gyp -v v1.0.2remote: gyp ERR! not ok remote: npm ERR! Windows_NT 6.2.9200remote: npm ERR! argv "D:\\Program Files (x86)\\nodejs\\0.12.0\\node.exe" "D:\\Program Files (x86)\\npm\\2.5.1\\node_modules\\npm\\bin\\npm-cli.js" "install" "--production"remote: npm ERR! node v0.12.0remote: npm ERR! npm v2.5.1remote: npm ERR! code ELIFECYCLEremote: remote: npm ERR! [email protected] install: `node-gyp rebuild`remote: npm ERR! Exit status 1remote: npm ERR! remote: npm ERR! Failed at the [email protected] install script 'node-gyp rebuild'.remote: npm ERR! This is most likely a problem with the mariasql package,remote: npm ERR! not with npm itself.remote: npm ERR! Tell the author that this fails on your system:remote: npm ERR! node-gyp rebuildremote: npm ERR! You can get their info via:remote: npm ERR! npm owner ls mariasqlremote: npm ERR! There is likely additional logging output above.remote: remote: Failed exitCode=1, command="D:\Program Files (x86)\nodejs\0.12.0\node.exe" "D:\Program Files (x86)\npm\2.5.1\node_modules\npm\bin\npm-cli.js" install --productionremote: npm ERR! Please include the following file with any support request:remote: An error has occurred during web site deployment.remote: npm ERR! D:\home\site\wwwroot\npm-debug.logremote: remote: Error - Changes committed to remote repository but deployment to website failed

Hello,
From your description, this issue seems to be related with azure development, i move it to the azure forum there are azrue experts will help you. The current forum is for .NET class libraries.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I try to paste an CCI file into a PSD, I get this message- Could not complete the Paste command because the ICC profile is invalid. I need the layer to be an editable smart object! What's the solution? Ron

When I try to paste an CCI file into a PSD, I get this message… Could not complete the Paste command because the ICC profile is invalid.
I need the layer to be an editable smart object! What's the solution?
Ron

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

Is this happing because the external is formatted to PC and not mac?
Yes that is correct.
Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
regards

Could not paste the following strings from the clipboard into presentation mode key

Similar Messages

Maybe you are looking for