Could not print "whatever file name" because of a disk error ???

Hello,
I am running Snow Leopard 10.6.4, and Adobe CS5 suite, whenever I try to print to my printer I get this error from Photoshop, which is rather annoying. I have the scratch disk set to an empty 1tb hdd, and obviously the primary drive works just fine as well. Amazingly I googled it like crazy and nobody has the same issues (on a mac) . Any suggestions?

I doubt there has ever been a color profile written for a LaserJet 4M+.
I thought I'd try it again and try to capture any errors in the log files.
So I went back into Photoshop and changed the print settings to "Printer Manages Colors".
I am trying to print a tiff file that has the profile "Untagged Gray" assigned to it.
With that file, I click on Print Settings and nothing happens. The window that should open doesn't. I don't know if that provides a clue.
Also no errors in the log files.
Earlier I had a PSD file open and I tried it and it worked with either "Printer Manages Colors" or "Photoshop Manages Colors".
But I just tried it again and now it doesn't. I've tried quitting and restarting Photoshop and it doesn't seem to make a difference.
I'll keep trying it and see if I can find a pattern for why it works sometimes and not others.
Photoshop Manages Colors always works.
Printer Manages Colors seems very flakey.

Similar Messages

Could not save as (file name) because the file could not be found

When i try saving sothing it comes up with could not save as (file name) because the file could not be found and need to save this file. i could save stuff before but not anymore if anyone could help i would be grateful
im using photoshop cs5.1
Thanks keiron

We cannot know. These kinds of things are operating system errors with stuff getting blocked due to insufficient permissions, security tools interfering, network errors or whatever. Since you mentioned none of that, it's an "Ask your mom..." thing at this point, but if you provide more details, someone might be able to figure it out.
Mylenium

Could not complete the Liquify command because of a disk error. any ideas?

Could not complete the Liquify command because of a disk error. any ideas?

When you choose liquify command it says "Could not complete the Liquify command because of a disk error." so nothing at all happens other than the error message
There is plenty of room on my scratch disks --lots of it
Tried using a smaller selection using Marquee Tool to outline a smaller area near where I want to Liquify. makes no difference. tried a small file as well. no ability to use liquify.
This is really weird.
keep probing the depths of your mac ideas, as I am going a bit nuts with this, friends

Could not complete the liquify command because of a disk error

PSE 13 displays the above message when I try to use the Liquify filter. There are no disk errors on my machine. Other Filters (but not all) also fail to open.
Any suggestions please.

Geoff Drew has added:
I have resolved this problem by allocating more memory to PSE under the Performance Tab under Preferences.

PSE 5 Error "could not complete the open command because of a program error"

I have been using PSE 5 for years but all of a sudden when I try to open multiple files "could not complete the open command because of a program error" appears. I have reformatted my computer and reinstalled all programs & updates but still get the error. I am trying to access photo files in a specific, user created, directory on my computer; the funny thing is that if I access files in the My Documents\My pictures\ Sample pictures folder I am able to open all the files. Any and all help or suggestions are welcome. Thanks

When you choose liquify command it says "Could not complete the Liquify command because of a disk error." so nothing at all happens other than the error message
There is plenty of room on my scratch disks --lots of it
Tried using a smaller selection using Marquee Tool to outline a smaller area near where I want to Liquify. makes no difference. tried a small file as well. no ability to use liquify.
This is really weird.
keep probing the depths of your mac ideas, as I am going a bit nuts with this, friends

HT3775 I could not open video file name with .flv

I could not open video file name with .flv Please help to advise?

Install Perian or use VLC.
(86537)

I keep getting error message (cannot save as "file name" because of a program error)

I opened a pdf in photoshop and when I need to save it back as a pdf i get this error (cannot save as "file name" because of a program error). I need to save it specifically as PDF/X-1a:2001 but the only pdf options that will work are "highest quality print" and "smallest file size". None of the others work. I'm running Photoshop CS5 on a PC laptop and I tried it on my desktop and also a mac running CS 5.5 and always get the same error. I think the problem might be with the custom color settings I have but it works fine on my work computer with the same color settings. What could be going on?

Yes, it's probably related to your color settings in some way. Why you are doing it in the first place...? Since they are ISO standards there is simply no liberty in choosing arbitrary settings for PDF/X, especially the archicval flavors... So in conclusion you will have to make your color settings compliant. The crash itself is probably a bug in the PDF libraries and it may work at your office because there you may use a different version of Acrobat/ Adobe Reader and the associated PDF libraries which do not have this bug. Still, the initial issue remains: You need to work within the spec, not against it.
Mylenium

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

Could not complete the Crop command because of a program error - Win 7

So I use PS CC everyday for cropping out images from design mockups for websites.
Yesterday (1 April 2014) I got a new comp from the designer with some updated images. So I opend the comp, and began to setup the cropped area with my guides. I then grabbed the marquee tool and made my selection, clicked Image->Crop, and then I get an error message.
"Could not complete the Crop command because of a program error."
Well that is helpful.
So now its "Help me Google, you're my only hope.", after about an hour or so of searching this error I find that it mostly happens to Mac users. I am using Windows 7. I also find that people are trying to get information form a PSErrorLog.txt file that is suppsoed to be located in the "Preferences Folder"... again I am on Windows 7.
So more searching to find the Windows eqivelant of this file's location: C:\Users\{USERNAME}\AppData\Roaming\Adobe\Adobe Photoshop CC\Adobe Photoshop CC Settings
Only to find there is no PSErrorLog.txt file. I do have a sniffer-out.txt file and a bunch of .psp files, a SynchFiles folder and 2 Workspaces folders (one Modified).
So I say to myself, "Well, I have cloud and a fast connection, won't take long to reinstall." So I delete PS ( I am also runnig DW, FL, Br, and AI ), and PS only. I do not run the cleaner tool as it only wants to delete a PS driver, or EVERYTHING!, which I do not want to do, I just want to delete PS. So I delete PS and check for anything left behind (why is there always stuff left behind? Apparently DELETE really means "Only delete some parts of the app that are required to make it work, and leave the rest behind.", or something.). Anyway, I then reinstall, go to crop again, and get the same error.
So here I am, "Help me Adobe Forums, you're my only hope."

Mylenium,
You are correct. But none of that information, or those parameters, have ever had any effect on cropping anything in PS before. I crop vector smart objects brought in from AI all the time. In this case, yes the layers I am trying to crop are vector smart objects, which I rasterized and merged, then resaved the document and still get the same issue.
But, going off of your suggestion, I did flatten the image completely and I am now able to crop it without error. I suspect that there is something else in the layers that maybe causing this issue, as you have mentioned.
Thank you for your input, while you may not have known it, you gave me at least somewhere to start to try and figure out what is happening.

Could not complete the export command because of an application error

Every once in awhile I get the error, "Could not complete the export command because of an application error" when using the Save for Web option. It's really confusing because the error is not consistent. I don't get it all the time. In fact, 99% of the time I can save with no problems. When I quit Photoshop and reopen my files they seem to save just fine. Does anyone know why this happens, and how to prevent it from happening in the future?
Here are my specs:
Macintosh: iMac
OS: 10.6.8
Photoshop: CS3 (v10.0.1)
Any help is greatly appreciated!

No idea about the specific issue, but I like to pass on some general advice I have received myself here over time:
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by pressing command-alt-shift on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.

Could not synchronize the color settings because of a program error.

Hello,
I am using PS CS 5 on a brand new MAC OSX 10.9.4.
Upon startup of PS, I get this message:
"Could not synchronize the color settings because of a program error."
If I click "Okay", the message goes away and I can use PS. What does this message mean and how do I fix it?
Thanks in advance.
Patrick

Just ignore it.
The message refers to color settings not being identical in all installed applications. And they don't have to be - mine are deliberately unsynchronized and I have no desire whatsoever to synchronize them.
Note that color settings are stored under your user account and are not removed with an uninstall. So the message could well refer to uninstalled apps, trial versions, anything you once had on your system.
Personally I think this is a useless and misleading warning and they should just remove it, considering the amount of confusion it causes.
Spinipes, the printing crash is unrelated to this. Start a new thread for that.

Help me! "Could not complete the export command because of an application error"

Please, help me!
I've got the mistake "
"Could not complete the export command because of an application error" when I save for web in PS3 in win
thks so much,

You need to provide much more info about your system or else this is pointless.
Mylenium

Itunes could not connect to the iPhone "" because of an unknown error occur

New to iTunes and iPhone (3g 8gig black)...
Apple store was unable to activate the phone in the store...
I installed iTunes today 7.7.0.43 and plugged in phone and got the message:
itunes could not connect to the iPhone "" because of an unknown error occurred (0xE8000035).
Vista thinks I have a "Digital Still Camera" when i plug it in but the driver for the "Digital Still Camera" fails to install...
I rebooted the computer.
I restarted the iphone (Pushed top button then slide to power off and then pushed again to power on)
I reset the iphone (top and home button for 10-15 seconds till i saw apple logo)
any ideas?
ps - i tried calling 1-800-my-iphone but i was unable to get to a person - is their tech support always that crappy or just today since its launch day?

This may not make you feel any better, but it's not you, it's not your new phone, and it's not the way Apple normally works. It is extreme overload for today. I have one of the original iPhones, and today I tried to simply get the new software, and after all the download and firmware updating, I got the same message you did. It had persisted all day, and, I'm sorry to say, is likely to for the rest of the day. I'm on a Mac, so it's not a Vista thing, either. Other people I know who bought the new phone are also experiencing the same thing. Spread the word! Discourage anyone from upgrading today! Or they, too, will be WITHOUT A PHONE!!
Good luck to us all,
Shelley

Error could not synchronise the colour settings because of a program error

Keep getting this error could not synchronise the colour settings because of a program error
and it crashes when trying to print

Color Settings are synced through Bridge. Try re-syncing the Color Settings in Bridge (See: Creative Suite * Keeping colors consistent)
If that doesn't work, try resetting Photoshop's preference settings: Photoshop Help | Preferences

"Could not synchronize the color settings because of a program error." App keeps crashing.

Hi, I keep getting this error message, "Could not synchronize the color settings because of a program error." whenever I click on Photoshop in my dock. A few seconds after, I'll get a crash report. I just upgraded to OS X Mountain Lion and have not been able to start Photoshop since. Illustrator, on the other hand, works fine. Any idea why this is? Any help would be greatly appreciated.

Can you open Photoshop with the shift.key pressed?
Boilerplate-text:
Are Photoshop and OS fully updated?
As with all unexplainable Photoshop-problems you might try trashing the prefs (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed) by keeping command-alt-shift pressed on starting the program or starting from a new user-account.
System Maintenance (repairing permissions, purging PRAM, running cron-scripts, cleaning caches, etc.) might also be beneficial, Onyx has been recommended for such tasks.
http://www.apple.com/downloads/macosx/system_disk_utilities/onyx.html
Weeding out bad fonts never seems to be a bad idea, either. (Validate your fonts in Font Book and remove the bad ones.)
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
If 3rd party plug-ins are installed try disabling them to verify if one of those may be responsible for the problem.

Could not print "whatever file name" because of a disk error ???

Similar Messages

Maybe you are looking for