Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.
Hi
I am trying to set up an Azure RemoteApp Hybrid solution.
I have created RemoteApp net and uploaded a custom image and all that is fine.
When I link my template to my Collection it fails after provisioning for about an hour.
I recive the following message: Could not provision the RemoteApp collection. Error: Could not join the domain. Unable to reach the domain.
The join domin works fine and I have tryed with account with different lvl of access to my AD.
Any suggestion how to solve this?
Hello Eric,
I am landing into the same Problem and i read your guidance on this issue. Let me answer it point by point.
1. Check the VPN state to ensure it is active or connected state:
Sundesh:My Azure RemoteApp Virtual Network after successfull S2S configuration shows as Ready. Is that what you mean by Connected State? Earlier to S2S, it was just under connecting state.
2. Verify your VNET configurations have proper IP address ranges
Sundesh: The VNET address range, the Local address range and DNS has already been verified twice. In fact the same address ranges(with exception to VNET) are working fine on a VENT config on Azure VM instance. Verified.
3. Verify your DNS IP configurations are valid, (often this is the problem)
Sundesh: Yes its done and verified
4. Verify the credentials entered for domain join are valid.
Sundesh: Tested these credentials by joining a regular Azure VM to domain and it works there.
5. Make sure your VPN endpoint that Azure RemoteApp service is connecting to is not blocking traffic.
Sundesh: Can you please let us know the specific port numbers that we need to consider and i can have it checked with the Network team
Thanks
SUndesh
Similar Messages
-
Can not open photshop CC 2014 ERROR could not initialize Photoshop because of a program error
Hi
I can not open Photshop CC 2014
ERROR
could not initialize Photoshop because of a program errorI've had the same error happen to me. I deleted the preferences file, updated JAVA, etc. none of which worked.
I've spent days systematically working to isolate the variable that seems to make Photoshop work one day and "not initialize" the next. I simply can't afford to stop work when Photoshop doesn't want to initialize due to: PSOWLListenerProxyBaseCocoa.mm : 52 : REQUIRE failed
Apologies, but I REQUIRE YOU TO INITIALIZE!
I think that I've isolated the problem. I have a dual monitor set-up. Sometimes I use the second monitor and sometimes I don't, sometimes monitor 2 is powered on and sometimes it's not. It's really the only thing with any variance on my system. I disconnected my second monitor. Then I clicked the Photoshop icon and the program opened...
I am running OS X 10.9 and Photoshop CS 5.1
There appears to be a link between Photoshop not wanting to initialize and Graphics Card / Monitors. -
FireFox message of my bank website using 5 years: you
can tell Firefox to start trusting this site's identification.
Even if you trust the site, this error could mean that someone is
tampering with your connection. Don't add an exceptionsend me email
-
I just want to know if you could help me regarding my issue purchase Adobe Photoshop at Aps store unable to proceed the order due to forgot the answer for the 2 questions.
I dont know how to check my particulars during filling up my registration in apple store support.
Hope u could give us advice. Thanks...
CandidoSG
<Edited by Host>Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.
http://support.apple.com/kb/HT5699 -
i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled -
PXE T01 file not found PXE E3B TFTP Error file not found error
Hi,
I was trying to deploy OS through SCCM . i have made DHCP server and SCCM PC one PCst when i am trying to boot from client to DHCP by f12 i am getting following error. so that i have been completed following steps
TFTP
PXE-T01: File not found
PXE:E3B: TFTP Error- File not found
1)Removed WDS service and reconfigured
2)PXE role removed and re assigned
3)renamed temp folder
4)DP updated
suppose if i am trying to access the port throgh telnet
i am getting
C:\Documents and Settings\Administrator>telnet 192.168.1.65 60
Connecting To 192.168.1.65...Could not open connection to the host, on port 60:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 67
Connecting To 192.168.1.65...Could not open connection to the host, on port 67:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 66
Connecting To 192.168.1.65...Could not open connection to the host, on port 66:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 65
Connecting To 192.168.1.65...Could not open connection to the host, on port 65:
Connect failed
SCCM PXEsetup.log
====================================================================
<05-17-2011 22:02:14> SMSPXE Setup Started....
<05-17-2011 22:02:14> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 22:02:14> Installing Pre Reqs for SMSPXE
<05-17-2011 22:02:14> ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 22:02:14> Pre Req MSXML60 found.
<05-17-2011 22:02:14> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 22:02:14> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 22:02:14> Pre Req Wimgapi found.
<05-17-2011 22:02:14> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 22:02:14> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 22:02:14> ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Installing the SMSPXE
<05-17-2011 22:02:14> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 22:02:14> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:02:35> ====================================================================
<05-17-2011 23:02:35> SMSPXE Setup Started....
<05-17-2011 23:02:35> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:02:35> Installing Pre Reqs for SMSPXE
<05-17-2011 23:02:35> ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:02:35> Pre Req MSXML60 found.
<05-17-2011 23:02:35> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:02:35> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:02:35> Pre Req Wimgapi found.
<05-17-2011 23:02:35> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:02:35> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:02:35> ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Installing the SMSPXE
<05-17-2011 23:02:35> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:02:35> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:38:26> ====================================================================
<05-17-2011 23:38:26> SMSPXE Setup Started....
<05-17-2011 23:38:26> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:38:26> Installing Pre Reqs for SMSPXE
<05-17-2011 23:38:26> ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:38:26> Pre Req MSXML60 found.
<05-17-2011 23:38:26> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:38:26> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:38:26> Pre Req Wimgapi found.
<05-17-2011 23:38:26> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:38:26> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:38:26> ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Installing the SMSPXE
<05-17-2011 23:38:26> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:38:26> WDS Service is installed.
<05-17-2011 23:38:26> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-17-2011 23:38:26> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-17-2011 23:38:26> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-17-2011 23:39:47> pxe.msi exited with return code: 0
<05-17-2011 23:39:47> Installation was successful.
<05-18-2011 22:20:04> ====================================================================
<05-18-2011 22:20:04> SMSPXE Setup Started....
<05-18-2011 22:20:04> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:20:04> Deinstalling the SMSPXE
<05-18-2011 22:20:04> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:20:04> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 22:20:15> SMSPXE deinstall exited with return code: 0
<05-18-2011 22:20:15> Deinstallation was successful.
<05-18-2011 22:20:15> Removing PXE Registry.
<05-18-2011 22:23:18> ====================================================================
<05-18-2011 22:23:18> SMSPXE Setup Started....
<05-18-2011 22:23:18> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:23:18> Installing Pre Reqs for SMSPXE
<05-18-2011 22:23:18> ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:23:18> Pre Req MSXML60 found.
<05-18-2011 22:23:18> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:23:18> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:23:18> Pre Req Wimgapi found.
<05-18-2011 22:23:18> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:23:18> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:23:18> ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Installing the SMSPXE
<05-18-2011 22:23:18> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:23:18> WDS Service is installed.
<05-18-2011 22:23:18> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-18-2011 22:23:18> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:23:18> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:24:11> pxe.msi exited with return code: 0
<05-18-2011 22:24:11> Installation was successful.
<05-18-2011 22:31:06> ====================================================================
<05-18-2011 22:31:06> SMSPXE Setup Started....
<05-18-2011 22:31:06> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:31:06> Installing Pre Reqs for SMSPXE
<05-18-2011 22:31:06> ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:31:06> Pre Req MSXML60 found.
<05-18-2011 22:31:06> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:31:06> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:31:06> Pre Req Wimgapi found.
<05-18-2011 22:31:06> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:31:06> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:31:06> ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Installing the SMSPXE
<05-18-2011 22:31:06> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:31:06> WDS Service is installed.
<05-18-2011 22:31:06> SMSPXE already installed (Product Code: {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}). Upgrading/Reinstalling SMSPXE
<05-18-2011 22:31:06> New SMSPXE is the same product code. This is a minor upgrade.
<05-18-2011 22:31:06> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:31:06> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:35:43> pxe.msi exited with return code: 0
<05-18-2011 22:35:43> Installation was successful.
<05-18-2011 23:41:19> ====================================================================
<05-18-2011 23:41:19> SMSPXE Setup Started....
<05-18-2011 23:41:19> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 23:41:19> Deinstalling the SMSPXE
<05-18-2011 23:41:19> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 23:41:19> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 23:41:33> SMSPXE deinstall exited with return code: 0
<05-18-2011 23:41:33> Deinstallation was successful.
<05-18-2011 23:41:33> Removing PXE Registry.
<05-19-2011 00:38:50> ====================================================================
<05-19-2011 00:38:50> SMSPXE Setup Started....
<05-19-2011 00:38:50> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-19-2011 00:38:50> Installing Pre Reqs for SMSPXE
<05-19-2011 00:38:50> ======== Installing Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Found 2 Pre Reqs for Role SMSPXE
<05-19-2011 00:38:50> Pre Req MSXML60 found.
<05-19-2011 00:38:50> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-19-2011 00:38:50> Pre Req MSXML60 is already installed. Skipping it.
<05-19-2011 00:38:50> Pre Req Wimgapi found.
<05-19-2011 00:38:50> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-19-2011 00:38:50> Pre Req Wimgapi is already installed. Skipping it.
<05-19-2011 00:38:50> ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Installing the SMSPXE
<05-19-2011 00:38:50> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-19-2011 00:38:50> WDS Service is installed.
<05-19-2011 00:38:50> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-19-2011 00:38:50> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-19-2011 00:38:50> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-19-2011 00:39:15> pxe.msi exited with return code: 0
<05-19-2011 00:39:15> Installation was successful.I have similar issue same above error but this error i am getting intermittent keeping trying 2 or 3 times i get F12 option to boot the network services
TFTP
PXE-T01 The specified file not found
PXE-E3B TFTP Error : File not found
Our environment have DHCP configured In Inflobox and the Primary site server and PXE DP server located in Same Subnet and configured 2008 R2 sp1 and configured SCCM2012 in VM environment
I tried all the Options uninstall and re-install no luck and i have tried to increase Tramsmiit and recive Buffer size in lan card but the issue is not resolved.
Capture smspxe log when it found boot image the pxe working ,when it not found getting TFTP error.
SMSPxe log says no errors but getting client Pxe TFTP error file not found (Since its not looking Image throw out TFTP error)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://XXX.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
Set media certificate in transport
Set authenticator in transport
SMSPxe log says no errors t i can able to do pxe Log found Boot image
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://xxx.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
PXE::CBootImageManager::FindBootImage: SGP00004
Looking for bootImage SGP00004
PXE::CBootImageCache::FindImage
PXE::CBootImageInfo::UpdateAccessTime
Appreciate if you could provide some solution
Ksrini -
Not Possible to Install Skype - Error: Key not val...
Not Possible to Install Skype - Error: Key not valid for use in specified state. & then Error 1603.
I have tried all of the community fixes.
I* have cleaned the registry and repair is using the I can not access any .msi files on the skype site (not authorized). So that solution does not work.
ThanksFirst make sure that you have installed the latest Windows Updates.
This Windows Update,
http://support2.microsoft.com/kb/3000988
might have solved the issue with msi-installer. If not, then try this:
http://community.skype.com/t5/Windows-desktop-client/Key-Note-valid-for-use-in-specified-state-error... -
When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)
Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences. -
I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?
I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?
-
I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base costing, a refund.
KevinI don't know what you are saying. How do I get my money refunded.
-
I am not getting the verification e mail, for my apple id and unable to use the apple store
Hi There,
I am uable to get the verification e mail for my apple id and unable to use the apple store.
Regards,
AmeeraG to appleid.apple.com and then to manage ID and see if you can get the ID working there
-
When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.
Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha -
I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation. When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.
Hi Tom,
kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
For serial number message try:
Error "Invalid serial number" | Acrobat 9 | CS4
Thanks,
Atul Saini -
My adobe cc keeps telling me that its unable to reach the server
my adobe creative cloud keeps telling me that its unable to reach the server. It told me to check the firewall and i did but im still unable to download programs
Mybe,because you did not installed well,or because the server does not work propperly at that time!
-
'Could not find the requested node error' when guests join the meeting room
I am working on a program where the owner would allow guests after they knock to enter the meeting room. Upon acceptance, they would also be permitted to publish/subscribe audio.
My ' meeting owner' application code is an adaptation of the Knocking Queue example. The 'owner app' code has the following settings in its creation complete.
// Require that guests must knock.Note that this line changes the setting of your room so that in future anyone guest coming in
// has to knock.
cSession.roomManager.guestsHaveToKnock = true;
//Enable autopromote
cSession.roomManager.autoPromote =
true;
I get an error when the owner logins in first and accepts the guest into the meeting room.
// Event handler function for displaying the selected Alert button.
private function alertClickHandler(event:CloseEvent):void {
var queue:Array = pendingArray;
if ( cSession.userManager.myUserRole == UserRoles.OWNER ) {
var item:Object = pendingArray.shift();
trace (item["label"]);
trace (item["descriptor"].userID);
if (event.detail==Alert.OK)
//Admit user for chatting
cSession.roomManager.knockingQueue.acceptUser(item["descriptor"].userID);
//Allow user to publish audio - supposed to be promoted through room setting
//audioPub.setUserRole(item.descriptor.userID, UserRoles.PUBLISHER);
else //if (event.detail==Alert.CANCEL)
cSession.roomManager.knockingQueue.denyUser(item["descriptor"].userID);
The 'client' application throws the following error.
SWF] C:\Documents and Settings\a246216\My Documents\Flex Builder 3\Client Chat Tool\bin-debug\ClientChatTool.swf - 1,572,471 bytes after decompression
AFCS Beta Build # : 0.92
requestInfo http://connectnow.acrobat.com/fidelity2/ramr?guk=ZzprOg==&mode=xml&x=0.011843591462820768
Getting FMS at https://na2.connectnow.acrobat.com/fms?ticket=1468amkp7k35g, attempt #1/3
result: <fms>
<origin>fms2.acrobat.com</origin>
<proto_ports>rtmps:443</proto_ports>
<retry_attempts>2</retry_attempts>
</fms>
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 protocols: [object ProtocolPortPair]
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 [attempt 1 of 2] Connecting to 0/0: rtmps://fms2.acrobat.com/cocomo/na2-sdk-825d634c-46ed-4ed3-aa58-7450f0f7e36a/ramr #startProtosConnect#
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 tempNetStatusHandler 0/1,NetConnection.Connect.Success
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 isTunneling? false
#FMSConnector# Tue May 12 11:26:50 GMT-0400 2009 is using RTMPS? true
RECEIVED LOGIN AT SESSION
.user descriptor from server [object]
.displayName [string]= k
.userID [string]= GUEST-110858C2-4F16-4FE8-BF2C-D572F915FEC5
.affiliation [number]= 5
.role [number]= 5
RECEIVENODES UserManager
receiveAllSynchData UserManager
checkManagerSync:[object UserManager]
RECEIVENODES FileManager
receiveAllSynchData FileManager
checkManagerSync:[object FileManager]
RECEIVENODES AVManager
receiveAllSynchData AVManager
checkManagerSync:[object StreamManager]
RECEIVENODES RoomManager
receiveAllSynchData RoomManager
checkManagerSync:[object RoomManager]
RECEIVENODES Chat
receiveAllSynchData Chat
Error: Could not find the requested node.
at com.adobe.rtc.sharedModel::CollectionNode/getNodeConfiguration()[C:\work\main\connect\coc omoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:394]
at com.adobe.rtc.sharedManagers::StreamManager/getNodeConfiguration()[C:\work\main\connect\c ocomoPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:577]
at com.adobe.rtc.collaboration::AudioPublisher/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\collaboration\AudioPublisher.as:1009]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::StreamManager/onUserRoleChange()[C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1410]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveCascadingUserRole()[C: \work\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:813]
at com.adobe.rtc.messaging.manager::MessageManager/http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveUserRole()[C:\work\mai n\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:715]
at com.adobe.rtc.session.managers::SessionManagerBase/receiveUserRole()[C:\work\main\connect \cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:352]
The above error is thrown just when the 'guest' is accepted into the meeting room. The guest has not published anything at this point.
The chat part is working fine.
I have tried different ways to resolve this issue but I am not getting anywhere. I have tried different things. Your help is appreciated.
RamIt is win 7 64 bit system and same error on Illustrator x86 and x64.
Maybe you are looking for
-
Course Type combination of Sequence, Alternate Group and Default in PP01
Hi Guys, Need your help that we are facing currently. While linking Course type with Course program(Mandatory block), we are facing issue below- No sequence number visible on portal. Trainings are visible in Alternative section. After initial analy
-
Sharing a monitor with a Windows machine
Following the general advice in this forum, I would like to install an old Windows-pc to run some games, rather than using a Windows emulator. Would it be possible to share my Iiyama Vision Master 400 (works well with the Mini) with a pc?
-
Hi All We are executing a materialized view fast refresh and go an error on the child view SQL> execute DBMS_MVIEW.REFRESH('ADRN_MV', nested => TRUE, atomic_refresh=>false); BEGIN DBMS_MVIEW.REFRESH('ADRN_MV', nested => TRUE, atomic_refresh=>false);
-
I am using nokia C6-00. The messages sending is failed everytime I try to send msg to any contact and it shows an error that ''memory is full : close some applications and try again.'' even when no other app is running. Please help me out of this...!
-
Where Is The Virtual Private Database Option
In apex 3.2, I could find the Virtual Private Database option in Shared Components/Security I am now using Apex 4.2 and I cannot find this option under Shared Components/Security or anywhere else. Where has it gone ? Gus