Could not read administrative data for payroll result

Hi Experts,
I am trying to extract data from ECC6.0 for datasource 0HR_PP_REC_51 and getting error:
"Personnel No. 00100062 : Could not read administrative data for payroll result    HR_BIW_PP"     
Can any body tell me the relevant solution for that.
Thanks in advance!
Sapna

Hi Sapna,
Please can you tell me how to fix this error, I have the same problem now.
Thanks in advance.

Similar Messages

  • Ad Hoc Query - While executing - System could not read any data

    Hello Techies,
    When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
    But system is throwing this error -
    System could not read any data
    Message no. AQ_AD_HOC226
    Diagnosis
    There is no data available for the specified selections.
    System response
    The results list in the lower part of the screen still displays the last list to be created.
    Please let me know why does it happening ?
    Thanks
    Jaydeep

    It was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
    changed to all

  • Cisco ISE with AD Problem: "Could not read groups data: Global catalog not found"

    Hi all,
    When I make the ActiveDirectory integration with Cisco ISE, I have complete with this integration. but when I try to read the Groups from Active Directory, ISE shows the message "Could not read groups data: Global catalog not found".
    My Domain has multiple sites and subnets, each contains GC for local logon. I have set ISE to the correct site and subnet. Forward and Reverse DNS are working with no error.
    Does anyone get this problem, please help.
    I have check into the ISE CLI Reference Guide 1.1.x
    You are about to configure Active Directory settings.
    Are you sure you want to proceed? y/n [n]: y
    Parameter Name: dns.servers
    Parameter Value: 10.77.122.135
    Active Directory internal setting modification should only be performed if approved by ISE
    support. Please confirm this change has been approved y/n [n]: y
    What shoud I set in the Parameter Name ? dns.servers or my dns hostname ?
    Please suggest for this too.
    Thanks and Regards,
    Pongsatorn M.

    Hi Pongsatorn,
    Thanks for the reply!
    I've attached the results of the ISE detailed AD test. As you can see, there is a fair number of domain controllers in the AD forest.
    It seems everything works correctly until it gets to testing the AD connectivity on port 3268. Then I get this:
      Testing Active Directory connectivity:
        Global Catalog: pdascdc02.xyz.com
          gc:       3268/tcp - refused
      Testing Active Directory connectivity:
        Global Catalog: pdascdc02.xyz.com
          gc:       3268/tcp - refused
    For some reason, the request to the controllers on port 3268 is being refused.
    Any thoughts you might have are greatly appreciated.
    Cheers,
    Greg

  • Oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data conf

    I have an J2EE application along. This application works fine in IDE(JDeveloper9i), but when I want to deploy the EARfile in Jdeveloper10g,it gives me nested Exception in the code according to the following message in the console:
    Wrote WAR file to C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\webapp1.war
    Wrote EAR file to C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\application1.ear
    Invoking OC4J admin tool...
    C:\jdev\jdk\jre\bin\javaw.exe -jar C:\jdev1012\j2ee\home\admin.jar ormi://strele01.idc.oracle.com:23791 admin **** -deploy -file C:\jdev1012\Workspaces\Workspace_STInstall\Pr_Dev_Aug05\deploy\application1.ear -deploymentName stinstall-ear
    Error: Deploy error: deploy failed!: ; nested exception is:
    com.evermind.client.orion.AdminCommandException: Deploy error: deploy failed!: ; nested exception is:
         oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
         at com.evermind.client.orion.DeployCommand.execute(DeployCommand.java:98)
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
         at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java:30)
    java.rmi.RemoteException: deploy failed!: ; nested exception is:
         oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
         oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
         at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1602)
         at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1553)
         at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
         at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
         at __Proxy0.deploy(Unknown Source)
         at com.evermind.client.orion.DeployCommand.execute(DeployCommand.java:95)
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
         at com.evermind.client.orion.Oc4jAdminConsole.main(Oc4jAdminConsole.java:30)
    Caused by: oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
         at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:91)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    ---- Embedded exception
    oracle.oc4j.admin.internal.DeployerException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
         at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:91)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    ---- Embedded exception
    java.lang.InstantiationException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
         at com.evermind.server.XMLServerConfig.storeConfig(XMLServerConfig.java:1249)
         at com.evermind.server.XMLServerConfig.storeJAZNConfig(XMLServerConfig.java:1197)
         at com.evermind.server.XMLServerConfig.mkUserManager(XMLServerConfig.java:174)
         at com.evermind.server.XMLServerConfig.initUserManager(XMLServerConfig.java:333)
         at com.evermind.server.XMLServerConfig.initUserManagers(XMLServerConfig.java:240)
         at com.evermind.server.XMLServerConfig.postInit(XMLServerConfig.java:643)
         at com.evermind.server.deployment.EnterpriseArchive.postInit(EnterpriseArchive.java:1035)
         at com.evermind.xml.XMLConfig.init(XMLConfig.java:181)
         at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:317)
         at com.evermind.server.ServerComponent.copyAndDeploy(ServerComponent.java:386)
         at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:288)
         at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(ApplicationDeployer.java:283)
         at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:120)
         at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:73)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    ---- Embedded exception
    java.lang.InstantiationException: Could not read jazn-data config file: file:/C:/jdev1012/j2ee/home/application-deployments/stinstall-ear/jazn-data.xml for stinstall-ear (C:\jdev1012\j2ee\home\application-deployments\stinstall-ear\jazn-data.xml (The system cannot find the file specified))
         at com.evermind.server.XMLServerConfig.storeConfig(XMLServerConfig.java:1249)
         at com.evermind.server.XMLServerConfig.storeJAZNConfig(XMLServerConfig.java:1197)
         at com.evermind.server.XMLServerConfig.mkUserManager(XMLServerConfig.java:174)
         at com.evermind.server.XMLServerConfig.initUserManager(XMLServerConfig.java:333)
         at com.evermind.server.XMLServerConfig.initUserManagers(XMLServerConfig.java:240)
         at com.evermind.server.XMLServerConfig.postInit(XMLServerConfig.java:643)
         at com.evermind.server.deployment.EnterpriseArchive.postInit(EnterpriseArchive.java:1035)
         at com.evermind.xml.XMLConfig.init(XMLConfig.java:181)
         at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:317)
         at com.evermind.server.ServerComponent.copyAndDeploy(ServerComponent.java:386)
         at com.evermind.server.ServerComponent.initDeployment(ServerComponent.java:288)
         at oracle.oc4j.admin.internal.ApplicationDeployer.initArchive(ApplicationDeployer.java:283)
         at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:120)
         at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:73)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.internalDeploy(DefaultApplicationServerAdministrator.java:378)
         at com.evermind.server.administration.DefaultApplicationServerAdministrator.deploy(DefaultApplicationServerAdministrator.java:278)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:124)
         at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    Exit status of OC4J admin tool (-deploy): 1
    Elapsed time for deployment: 8 seconds
    #### Deployment incomplete. #### Aug 17, 2005 5:19:14 PM
    Does any one knows the cause of this exception??????????Plz. help
    Message was edited by:
    user446879

    Thanks....
    Contents of the orion-application.xml are below:
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++
    <?xml version="1.0"?>
    <!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application runtime 1.2//EN" "http://xmlns.oracle.com/ias/dtds/orion-application.dtd">
    <orion-application>
    <data-sources path="./data-sources.xml"/>
         <!-- mapping for realm "jazn.com" -->
    <security-role-mapping name="stonly">
              <group name="stonlys" />
         </security-role-mapping>
         <security-role-mapping name="stinternal">
              <group name="stusers" />
         </security-role-mapping>
         <security-role-mapping name="stadmin">
              <group name="stadmins" />
         </security-role-mapping>
    <security-role-mapping name="stinstallconfig">
              <group name="stinstallconfigs" />
         </security-role-mapping>
    <security-role-mapping name="stcalendar">
              <group name="stcalendars" />
         </security-role-mapping>
    <security-role-mapping name="stemail">
              <group name="stemails" />
         </security-role-mapping>
         <security-role-mapping name="stem">
              <group name="stems" />
         </security-role-mapping>
         <security-role-mapping name="stfile">
              <group name="stfiles" />
         </security-role-mapping>
         <security-role-mapping name="stintegclient">
              <group name="stintegclients" />
         </security-role-mapping>
         <security-role-mapping name="strtc">
              <group name="strtcs" />
         </security-role-mapping>
         <security-role-mapping name="stusearch">
              <group name="stusearchs" />
         </security-role-mapping>
         <security-role-mapping name="stcportlet">
              <group name="stcportlets" />
         </security-role-mapping>
         <security-role-mapping name="stwireless">
              <group name="stwires" />
         </security-role-mapping>
    <security-role-mapping name="stvmfax">
              <group name="stvmfaxs" />
         </security-role-mapping>
         <!-- use JAZN-XML by default -->
         <jazn provider="XML" location="./jazn-data.xml" />
         </orion-application>
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Plz. clarify about the listing of the EAR file you wants to have a look??

  • Debuging mapping - error : Could not find test data for target operators ?

    Hello, Please help me.
    I use Oracle Warehouse Builder 10gR2.
    I created a cube with two dimensions.
    I debugged the mappings of these two dimensions then viewed their data after deployment.
    I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
    For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
    But the error is here: Could not find test data for target operators. Why ??
    How to configure or explain to owb that the target operator do not have test data ????
    I need your help.
    thank you in advance.

    Sorry, I can not understand your approach ?
    I explain you in detail : I work in ROLAP.
    I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
    I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
    For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
    I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
    I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
    thank you for help.

  • Failed to load webapp and Could not discover administration URL for server

    Not able to deploy application on SOA server.
    Hi All,
    I am not able to deploy my application to the SOA server as i am getting the below error..I am not using bam server at all and still it is saying "Could not discover administration URL for server 'bam_server1'." plz help.
    [07:53:58 PM] [Deployer:149191]Operation 'deploy' on application 'ProjectCreationApplication' is initializing on 'soa_server1'
    [07:53:58 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
    java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
    [07:53:59 PM] [Deployer:149193]Operation 'deploy' on application 'ProjectCreationApplication' has failed on 'soa_server1'
    [07:53:59 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: Failed to load webapp: '/workflow/ProjectCreation_UI'.
    [07:54:01 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
    [07:54:01 PM] Caused by: java.lang.ClassNotFoundException: oracle.bpel.services.workflow.client.worklist.servlet.IntegrateTaskFlowWithTask
    [07:54:01 PM] See server logs or server console for more details.
    [07:54:01 PM] weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
    [07:54:03 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
    [07:54:03 PM] #### Deployment incomplete. ####
    [07:54:03 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

    Hi Vipin,
    Might be the way you're deploying your ADF UI project.
    Are you right clicking the name of your ADF UI project in the Application Navigator tab and then clicking "Deploy"? While this works great for your BPM composite project, you'll get errors like this when deploying the ADF project in the same manner.
    Dan

  • Could not read jazn-data config file

    I am using JDev 10.1.2
    When deploying my app I am receiving
    "oracle.oc4j.admin.internal.DeployerException: Cound not read jazn-data config file..." when deploying my app of OC4J 10.1.2.
    When I deploy directly to an EAR file and open the EAR file I see:
    application.xml
    data-source.xml
    blah.war
    orion-application.xml
    I belive what I should see in my EAR file is:
    META-INF
    blah.war
    And drilling down into META-INF I should see:
    application.xml
    data-source.xml
    jazn-data.xml
    orion-application.xml
    It seems that there is something that is configured incorrectly in my blah.deploy file but I can't find it. I have compared line for line with another app that creates the EAR as expected and I can successfully deploy from that application.
    Please help.

    Hi,
    the orion-application.xml file should have a content similar to this
    <?xml version = '1.0' encoding = 'windows-1252'?>
    <!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application runtime 1.2//EN" "http://xmlns.oracle.com/ias/dtds/orion-application.dtd">
    <orion-application>
    <data-sources path="./data-sources.xml"/>
    <jazn provider="XML" location="jazn-data.xml"      
    default-realm="jazn.com"/>
    </orion-application>
    Otherwise the jazn-data.xml file cannot be found.
    Frank

  • Lightroom not reading correct data for Lens and Camera Serial Number

    Hi you all.
    Recently got Lightroom, and I'm so impressed - I never imagined image organizing and adjustment could be this easy and at the same time very advanced.
    I have a problem, however. Lightroom (and Adobe Bridge, too) does not correctly read the EXIF data of Lens type and Camera Serial Number.
    The first ~50 images I took and imported turned out correctly and displayed my serial number and lens (18-55 mm Canon) inside Lightroom.
    But now, whenever I import photos into Lightroom or view them with Bridge, they all display "Unknown Lens" and "Unknown Camera Serial Number".
    At first I thought that maybe the camera didn't correctly record this data on to the photos anymore for some reason, but a comparison using EXIFToolGUI shows that the metadata is EXACTLY the same as in the photos that display this info in Lightroom correctly.
    I have not done any changes to either my camera (Canon EOS-350D / Digitial Rebel XT) or lens (the kit lens, 18-55 mm Canon).
    It seems that for some reason, Lightroom has stopped reading these two fields of metadata - all the other fields, such as aperture and shutter speed, all display correctly.
    I also tried to reimport the photos into Lightroom, but it didn't help. Neither did "Synchronize Folder" -> "Scan for metadata updates".
    What should I do? I'd like my lens information do display correctly, as I'll buy a new lens soon.
    I have attached one of the photos that Lightroom doesn't read the data correctly from. Try importing it into your Lightroom, and see if how the info displays.
    Thanks in advance.

    Are these jpgs or RAW?  I have only edited metadata on jpgs.
    It looks like Vista's import stripped out all the makernotes.  I didn't look at your file but that seems to be what happened.  Be warned, Photoshop CS2 also strips out makernotes!
    Now how to fix the problem.  If you want to edit the metadata on files already loaded into LR, you need to write out your metadata to the files first, then edit the metadata, then read the new metadata into LR.  This is scarey for me, so I always make sure my backup is up to date on the images first.
    What to do...  You probably can't put back all of the makernotes, so what to do to get the lens information in.  I don't know if putting back in the makernote LensType would trigger LR to reconsider its lens information.  I don't know.  If it had a real lens name, my guess would be no because it would have an XMP::Lens field which would override.  But maybe unknown lens doesn't have this field and it would re-read the makernotes.
    The other solution is to forget about makernotes for these images and put the exact text you want into XMP::Lens.  I think that's the "easy" way.
    In either case, you will have to become familiar with exiftoolGUI or exiftool itself.  I use the command line exiftool but it looks like you can edit multiple files with exiftoolGUI.  Select your files, click the edit thingy (^) under XMP, choose various, and there is lens.  Put in the text you want.
    I would do this with one file first.  If the lens shows up after you read the new metadata into LR, you know you have it right.
    Note, exiftool can write backup files for each file.  This makes too much of a mess for me.  I prefer to copy the directory first (I have copies anyway, I just have to make sure the backups are up to date).
    Good luck!  I'm struggling with a similar situation where the same lens used by two different cameras is coming out with a different name.  I need to go back and "fix" the names in the images already imported, and then develop my procedure for setting a single unique name before I load new images into LR.  Not too much of a problem because I'm loading in GPS information anyway...  What's another call to exiftool...
    Judy

  • JDevloper 10.1.3 OC4J - SEVERE: Could not read manifest of

    I have a struts based web application in my JDeveloper 10.1.3. Everytime I run the application I get the error logs displayed below before the application starts, usually this takes about 20 seconds. Please advise what could be causing this error.
    [Starting OC4J using the following ports: HTTP=8989, RMI=23892, JMS=9228.]
    C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config>
    C:\Oracle\jdev1013\jdk\bin\javaw.exe -ojvm -classpath C:\Oracle\jdev1013\j2ee\home\oc4j.jar;C:\Oracle\jdev1013\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config\server.xml
    [waiting for the server to complete its initialization...]
    05/08/04 11:18:46 Node started with id=127765687050882
    Aug 4, 2005 11:18:48 AM com.evermind.server.ejb.EJBPackageDeployment isIIOPConfigured
    INFO: Beans associated with application default will not be available via RMI/IIOP: GenerateIIOP system property=false, enableIIOP application setting=false, server.xml configured for IIOP=false
    Aug 4, 2005 11:18:48 AM com.evermind.server.ejb.EJBPackageDeployment isIIOPConfigured
    INFO: Beans associated with application default will not be available via RMI/IIOP: GenerateIIOP system property=false, enableIIOP application setting=false, server.xml configured for IIOP=false
    05/08/04 11:18:48 done.
    05/08/04 11:18:49 Copying default deployment descriptor from archive at C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config\connectors\datasources\datasources/META-INF/oc4j-ra.xml to deployment directory C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config\application-deployments\current-workspace-app\datasources...
    05/08/04 11:18:49 done.
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 6562 ms.
    Target URL -- http://192.168.102.18:8989/cusweb/page_start.jsp
    05/08/04 11:18:50 Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3 initialized
    SEVERE: Could not read manifest of: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/CuswebException.class (from <classpath> in U:\nsf\development\CusWeb\public_html) Caught java.util.zip.ZipException: error in opening zip file
    SEVERE: Could not read manifest of: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/HttpConstants.class (from <classpath> in U:\nsf\development\CusWeb\public_html) Caught java.util.zip.ZipException: error in opening zip file
    << could not read manifest appears for all classes >>
    SEVERE: Unable to access code-source: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/CuswebException.class (from <classpath> in U:\nsf\development\CusWeb\public_html). Caught java.util.zip.ZipException: error in opening zip file
    SEVERE: Unable to access code-source: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/HttpConstants.class (from <classpath> in U:\nsf\development\CusWeb\public_html). Caught java.util.zip.ZipException: error in opening zip file
    << Unable to access code-source appears for all classes >>
    --------------------------------------------------------------------------------------------------------------

    I have same problem. Did you have any chance to find out what cause of it?

  • Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

    whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

    Did you reinstall CS3 after CC?
    For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
    And you shouldn't need to save as IDML after opening the .inx in CC.

  • "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"

    Hi,
    I've already archived a lot of assets in my final cut server but since one week there is a message appearing when I click on an asset and choose "Archive". The pop-up says: "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"
    Does anyone know what's the problem and/or have any suggestions to solve my problem?! I can't archive anymore since the first appearance of this message.
    What happened before?
    -> I archived some assets via FCS and then transfered the original media to an offline storage media. That system worked fine for the last months and my normal server stays quit small in storage use. But now, after I added some more new productions and let FCS generate the assets, it doesn't work anymore...
    It's not about the file size - I tried even the smallest file I found in some productions.
    It's not a particular production - I tried some different productions.
    It's not about the storage - there's a lot of storage left on my server.
    So, if someone knows how get this server back on the road - let me know.
    THNX!
    Chris

    I would really appreciate some advice re: recent FCS search errors.
    We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
    Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
    OS 10.6.x updates.
    FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
    Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
    FCS has been running fine for last 4 years, minus the recent Java security issues.
    Thanks in advance, any ideas appreciated!
    cheers,
    Aaron Mooney,
    Post Production Supervisor.
    Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
    epn.tv

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Could not read definitions; no read definitions permission for table

    We have a hand punch (time clock) that is maintained in Access.  This is a 3rd party product, I believe I'm having a permissions problem but the vendor says we should be able to read the data as a guest account.  I select the database push the >> arrow and on all but two tables I get:
    Database Connector Error: DAO Error Code: 0xc26
    Source: DAO.Fields
    Description Could not read definitions; no read definitions permission for table or query 'AbsenseT'
    (Table name changes with each table of course.)
    After clicking through 30 some tables two of them are selected.  I can browse them etc. 
    Vendor has pushed out of his court saying its a Crystal problem but I believe its a permission problem especially since I can access those 2 tables but I need someone to confirm that for me or just tell me I'm wrong thats OK too. Any help as to why this is happening would be appreciated.
    Thanks,
    Randy

    Hi Randy,
    I believe CR will log in as Admin for the top level but we don't support the second level of security. As you can see we only one one level of prompt.
    ODBC may be a work around for you...
    Thank you
    Don

  • Use of error page resulting in could not deserialize session data exception

              We have recently converted classes that store objects in the HTTP Session to implement
              serializable.
              Our application uses an error page set up in our web.xml for 500 errors.
              It also uses filters.
              When our application throws an exception and allows the server to handle it
              via the error page setup, we end up with the exception we threw, plus a number
              of
              "Could not deserialize session data" exceptions in the stack trace.
              In general, the exceptions can be traced to lines in code that attempt to reference
              one of our "serializable" session objects to get user info for logging purposes.
              Problem is, other applications that do not use error pages to handle exceptions
              do not throw these types of exceptions in the wl-domain.log and they use the same
              classes.
              Does anyone know why this happens when using error pages and what we need to do
              to correct it?
              We are using Weblogic 8.1sp2.
              Thanks!!
              Example of the stack trace messages:
              ####<May 5, 2004 2:52:17 PM EDT> <Error> <HTTP Session> <machinexyz> <cgServer>
              <ExecuteThread: '11' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-100028>
              <Could not deserialize session data.
              java.io.NotSerializableException: weblogic.servlet.internal.FilterConfigImpl
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
                   at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1330)
                   at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1302)
                   at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1245)
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
                   at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
                   at weblogic.servlet.internal.AttributeWrapper.convertObjectToBytes(AttributeWrapper.java:136)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:112)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:69)
                   at weblogic.servlet.internal.session.SessionData.getAttribute(SessionData.java:431)
                   at doh.stuff.OurFilter.doFilter(OurFilter.java:67)
                   at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
                   at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:305)
                   at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:523)
                   at weblogic.servlet.internal.WebAppServletContext.handleException(WebAppServletContext.java:3908)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3683)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              ####<May 5, 2004 2:52:17 PM EDT> <Error> <HTTP Session> <machinexyz> <cgServer>
              <ExecuteThread: '11' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-100028>
              <Could not deserialize session data.
              java.io.NotSerializableException: java.util.Vector$1
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
                   at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1330)
                   at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1302)
                   at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1245)
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
                   at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
                   at weblogic.servlet.internal.AttributeWrapper.convertObjectToBytes(AttributeWrapper.java:136)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:112)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:69)
                   at weblogic.servlet.internal.session.SessionData.getAttribute(SessionData.java:431)
                   at doh.stuff.OurHTML.<init>(OurHTML.java:57)
                   at doh.stuff.OurFilter.startLog4j(OurFilter.java:513)
                   at doh.stuff.OurFilter.doFilter(OurFilter.java:75)
                   at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
                   at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:305)
                   at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:523)
                   at weblogic.servlet.internal.WebAppServletContext.handleException(WebAppServletContext.java:3908)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3683)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              

              We have recently converted classes that store objects in the HTTP Session to implement
              serializable.
              Our application uses an error page set up in our web.xml for 500 errors.
              It also uses filters.
              When our application throws an exception and allows the server to handle it
              via the error page setup, we end up with the exception we threw, plus a number
              of
              "Could not deserialize session data" exceptions in the stack trace.
              In general, the exceptions can be traced to lines in code that attempt to reference
              one of our "serializable" session objects to get user info for logging purposes.
              Problem is, other applications that do not use error pages to handle exceptions
              do not throw these types of exceptions in the wl-domain.log and they use the same
              classes.
              Does anyone know why this happens when using error pages and what we need to do
              to correct it?
              We are using Weblogic 8.1sp2.
              Thanks!!
              Example of the stack trace messages:
              ####<May 5, 2004 2:52:17 PM EDT> <Error> <HTTP Session> <machinexyz> <cgServer>
              <ExecuteThread: '11' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-100028>
              <Could not deserialize session data.
              java.io.NotSerializableException: weblogic.servlet.internal.FilterConfigImpl
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
                   at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1330)
                   at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1302)
                   at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1245)
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
                   at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
                   at weblogic.servlet.internal.AttributeWrapper.convertObjectToBytes(AttributeWrapper.java:136)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:112)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:69)
                   at weblogic.servlet.internal.session.SessionData.getAttribute(SessionData.java:431)
                   at doh.stuff.OurFilter.doFilter(OurFilter.java:67)
                   at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
                   at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:305)
                   at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:523)
                   at weblogic.servlet.internal.WebAppServletContext.handleException(WebAppServletContext.java:3908)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3683)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              ####<May 5, 2004 2:52:17 PM EDT> <Error> <HTTP Session> <machinexyz> <cgServer>
              <ExecuteThread: '11' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-100028>
              <Could not deserialize session data.
              java.io.NotSerializableException: java.util.Vector$1
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1054)
                   at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1330)
                   at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1302)
                   at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1245)
                   at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
                   at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
                   at weblogic.servlet.internal.AttributeWrapper.convertObjectToBytes(AttributeWrapper.java:136)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:112)
                   at weblogic.servlet.internal.AttributeWrapper.getObject(AttributeWrapper.java:69)
                   at weblogic.servlet.internal.session.SessionData.getAttribute(SessionData.java:431)
                   at doh.stuff.OurHTML.<init>(OurHTML.java:57)
                   at doh.stuff.OurFilter.startLog4j(OurFilter.java:513)
                   at doh.stuff.OurFilter.doFilter(OurFilter.java:75)
                   at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
                   at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:305)
                   at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:523)
                   at weblogic.servlet.internal.WebAppServletContext.handleException(WebAppServletContext.java:3908)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3683)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              >
              

  • Could not read the profile path for user S-1-5-21-1272265863-3531003469-187

    hi
    I was doing the installation of the crm702 on MAXDB+WINDOWS.IN THE FIRST PHASE OF EXECUTION(CREATE USERS FOR SAP SYSTEM) I GOT THE ERROR MENTIONED BELOW.CAN SOMEONE HELPE ME    :
    An error occurred while processing option Enhancement Package 2 for SAP CRM 7.0 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step: Could not read the profile path for user S-1-5-21-1272265863-3531003469-18741865-1021 from the registry: The system cannot find the file specified. .). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:/crmfeb.

    Hi,
    Delete all keys in registry (regedit) with: S-1-5-21-1272265863-3531003469-18741865-1021. You can do it by find it - F3.
    After that restart sapinst.
    Regards.

Maybe you are looking for

  • How to get the perious values in Module pool by pressing the space or back

    Hi All, I want to see the already entered values in the screen when ever pressing the backspace or space bar buttons.. For example in TCODE SE38 in program when i press the backspace or space bar , it is showing the perious opend programs, the same s

  • Simple Java ME Database Application Question -JSR-169

    Howdy, Using Netbeans to make a simple DB app using Derby's EmbeddedSimpleDataSource, show here: [http://wiki.apache.org/db-derby/JavaMESupport] I'm almost there except for adding the JSR-169 jar file. Apparently you cant just add the folder to the c

  • Picture Files

    Hello! I have Windows, and work with someone on a mac. 1. Can I edit a picture (jpg, gif, etc.) and send it to him? (i.e. will he be able to open it?) 2. On Word etc. if a picture has a white background (e.g. it was scanned in) on the picture toolbar

  • There is an insufficient memory to run this query.

    I am getting an error : there is an insufficient memory to run this query Error: 701, Severity: 17, State: 42 The instance is SQL 2005 instance with SP2. Please help.

  • Dynamic check box

    Hi I need help from all java expertise, I need to create dynamic check boxes. table have the customer name, one customer have multiple locations, on selection of customer name, all the locations should be displayed with chek box option, so that the u