"Could not read Domain.site2 file."

Wow.. this has totally ruined my day.
I have a big important site I need to manage on iWeb, and so the last time it actually did work I saved it and then shut the computer down. I think this screwed me over... I go to iWeb once I get internet access again and it says 2 errors. The first is "The document "Domain" could not be opened.". The second, "Can't open file "~Sites/Domain.sites2.". I thought, okay better go find this son of a gun file, and found it right there where it's supposed to be! After moving it a couple of places for experimentation purposes, I rested it in my Sites folder, explaining why it says the directory above. I have it, and nothing within it looks corrupt, but I'm sure it is. Is there anyway to restore my domain file? Say it so!!! This is soooo incredibly pathetic of apple to have a program that does this, and I feel like kicking the programmer that developed this right now! Other than that, it was a really really good program.
So any help?? How can I fix this file?

Hmm.. I'll repair the permissions.. I already repaired the disk though.
There were 2 buttons:
"Repair Disk" and "Repair Disk Permissions", I only clicked Repair Disk.
So I'll do the permissions.
Where is this file?? I think I already deleted it, or couldn't find it upon reading other support articles.. but where is it?

Similar Messages

Updated to firefox 4, and suddenly can't connect with any browser though I am connected. Error message reads "could not read chrome manifest file."

i updated firefox and now I can't access the net on any browser. Wireless router everything is connected and up and running. Just not the browsers. uninstalled it, reinstalled it (didn't work), unistalled it again and internet explorer won't work either (not at anypoint after intial update was run. read several peoples simalr problems with the "could not read chrome manifest file" issue and solutions to no avail. uninstall and system restore did not work either. What did it change on my system, and how can I change it back?

Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

Hello,this error comes up all the time:Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest'. What does it mean? and how can I fix it?

Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest'.
This is pretty much it, It was in my error console and its there
every time I check on my errors

I used the 64bit win7,when I start firefox it will be no response just in one
minute ,the console show me this error ：Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest！

Could not read Log4j configuration file when I run jar file

Hi,
I'm using Log4J in my application..
I configure the log4j, as follows;
PropertyConfigurator.configure("properties/logging.properties");and then go on to use it.
The .properties is in the root when I jar my source. I use Ant to Jar the file. It all works good when I run the jar file from ant.
The problem is when I run the jar file by double clicking on it, I get an error
" Could not read configuration file [properties/logging.properties]."
I tried the following options;
PropertyConfigurator.configure("/logging.properties");
PropertyConfigurator.configure("./logging.properties");
PropertyConfigurator.configure("../logging.properties");But in all cases, I get corresponding errors on running the jar file through Ant:
log4j:ERROR Could not read configuration file [logging.properties].
log4j:ERROR Could not read configuration file [./logging.properties].
log4j:ERROR Could not read configuration file [../logging.properties].
I want to be able to run the Jar by double clicking on it or through Ant.. Would any one know how to fix this issue so that I can use both methods..

Keep your properties file inside the root folder of your application.It is working fine

I have an older computer and could not read a pdf file so I just added the Adobe software for $14.95 and downloaded it but still can not open the reader. If I can't open it, please refund my money.

downloaded new software and still can't open files

Hi [email protected] ,
In order to read the PDF file, you need to download and install Adobe Reader. Please download it from the link below:
http://get.adobe.com/reader/enterprise/

Could not read my LVM file

Hi Everyone
I have created this LVM file after acquiring my signal. Right now i have a problem of extracting data from this LVM file. For example data from cell B24 to J24.
I have not experienced anything like this because it should be relatively simple. I have used loops and some methods to extract the data but it return me value of NaN or some other number. I do not know what is happening.
The attached file is the LVM that i created. Please help me on this ,thank you
PX
Solved!
Go to Solution.
Attachments:
12143_0005_Fri_ 12 Mar_ 2010.zip ‏381 KB

Use the Express VI to convert from the dynamic data type to a 2-D array. Then index out the appropriate column of your array.
You may also want to check the integrity of your data. In your file, the first row of data is pretty full. Later rows have numerous blank columns before and after 4 columns of data.
When I ran the attached VI snippet, I noticed it imported the data, but the columns of the other rows did not align with the first full row in the same way they do when I viewed your file in notepad. You will get a lot of NaN's for wherever your data is blank.
Message Edited by Ravens Fan on 03-13-2010 11:57 AM
Attachments:
Example_VI_BD.png ‏49 KB

Could not read chrome manifest file 'C:\Program Files\Mozilla Firefox\extensions\{972ce4c6-7e08-4474-a285-3208198ce6fd}\chrome.manifest'.

I need an FTP program. FireFTP was suggested.
Then Firefox blocked it. I allowed it and in the details
the error abovewas listed.
I want to download Microsoft Office 2010 and I
want to be sure its working.
Also have another program that I only get 1 chance
to download.
How can I be sure its working??

You can ignore that error message. This one is about the default theme that is now stored in the omni.jar archive.
If the FireFTP extension is working properly then there is no need to worry.<br />
Where did you download that extension from that you needed to allow the installation?
You should always download from the official Mozilla Add-ons site to avoid problems.
*FireFTP: https://addons.mozilla.org/firefox/addon/fireftp/

The Domains.site2 file transferred from another mac won't open in iweb

Just transfered a Domains.site2 file from one mac to another in the applications support/iweb folder. But when I open iweb I get the error: can't read Domains.site2 file. Any thoughts on why this might be? It's a large file - over 2 gigs, transferred from an iMac running OX 10.5 to a macbook running OX 10.6
Thanks!

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

Help, could not read properties after setting the RMISecurityManager.

Hi,
I am new in RMi and I could not read a properties file when run a class in jar file with java -jar option.
I start the the class by as follows.
java -jar darwin_enhanced.jar -Djava.rmi.server.codebase=file:///home/wing/Darwin/Project/release.server/DarwinServer.jar -Djava.security.policy=darwin.server.policy
I extract the following code snipplet from the main class.
/* get security manager */
if (System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
/* get properties */
Properties properties = new Properties();
try
System.out.println("before happy");
properties.load(getClass().
getResourceAsStream("/darwinServer.properties"));
System.out.println("after happy");
}catch (Exception e)
e.printStackTrace();
If the System.setSecurityManager(new RMISecurityManager()) is called before the properties.load method, the pgm prints out
'before happy' and dumps
java.lang.NullPointerException
at java.io.Reader.<init>(Reader.java:61)
at java.io.InputStreamReader.<init>(InputStreamReader.java:80)
at java.util.Properties.load(Properties.java:189)
at com.darwin.server.DarwinServer.startBind(DarwinServer.java:61)
at com.darwin.server.DarwinServer.main(DarwinServer.java:48)
If I reverse the order, call properties.load mehod before setting the RmiSecurityMananger,
/* get properties */
Properties properties = new Properties();
try
System.out.println("before happy");
properties.load(getClass().
getResourceAsStream("/darwinServer.properties"));
System.out.println("after happy");
}catch (Exception e)
e.printStackTrace();
/* get security manager */
if (System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
it works fine and print out
'before happy'
'after happy'
Thanks,
Wing

Hi,
Thanks for your ideas.
My primary object is to let the server reads propertiy files. I found that I have to set the RMISecurityManager, otherwise, the rebind will throws
java.rmi.UnmarshalException.
I have changed the testing program according to you inputs.
void startTest(){
System.out.println("CodeSource="+this.getClass().getProtectionDomain().getCodeSource());
System.out.println("Permission="+this.getClass().getProtectionDomain().getPermissions());
if(System.getSecurityManager()==null)
System.setSecurityManager(new RMISecurityManager());
Properties properties = new Properties();
try
System.out.println("CodeSource="+this.getClass().getProtectionDomain().getCodeSource());
System.out.println("Permission="+this.getClass().getProtectionDomain().getPermissions());
properties.load(RMIClassLoader.getClassLoader("file:/").getResourceAsStream("sample.properties"));
System.out.println("size of properties = " + properties.size() );
properties.load(getClass().getResourceAsStream("/sample.properties"));
}catch(Exception e)
e.printStackTrace();
I run in jar with the following command with no exception,
java -Djava.security.policy=java.all.policy -jar simBug.jar
Output
CodeSource=(file:/home/wing/try/java/bug.sim/RMISecurityManager/simBug.jar <no certificates>)
Permission=java.security.Permissions@8d107f (
(java.lang.RuntimePermission exitVM)
(java.io.FilePermission /home/wing/try/java/bug.sim/RMISecurityManager/simBug.jar read)
CodeSource=(file:/home/wing/try/java/bug.sim/RMISecurityManager/simBug.jar <no certificates>)
Permission=java.security.Permissions@8d107f (
(java.lang.RuntimePermission exitVM)
(java.io.FilePermission /home/wing/try/java/bug.sim/RMISecurityManager/simBug.jar read)
size of properties = 1
Thanks,
Wing

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Adobe Reader could not open a pdf file - either not supported file type or file damaged

On March 5th, I started getting the Adobe Reader error message "Adobe Reader could not open a pdf file because it is either not supported file type or the file has been damaged.
I get this when I try to open the pdf file as an attachment in Outlook 2013 from my G-Mail account. If I save the attachment and then try to open the pdf document, I get the same error4.
I get this error message with every pdf file that now comes to me in Outlook.
If I log on to my G-Mail I am able to open the pdf document. If I also save the attachment to my computer, I do not get the error message when I open the pdf file. This would suggest the file is okay
This would lead me to believe the problem maybe with Outlook.
I'm using Adobe Reader XI v11.0.10
I'm using Windows 8.1
Is anyone encountering this same issue with outlook?

I copied it again. Do you see it? BTW, how do I set privacy? (I'm new at this)
I opened with two different notepads and got different information.here it is from Windows Notepad. First few lines are:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd
>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css">td img {display: block;}</style>
</head>
Here it is from MS Notepad:
<HTML><HEAD><style>.ending {font-family: Calibri; font-size: 18px;}</style><BODY><TABLE><TR><TD colspan=100%><a href="http://www.trulynolen.com/questionnaire?l=14115468&o=141050070&z=85087-7515"><img src=http://newsletter.tnolen.com/email/service.png border=no></a></TD></TR><TR><TD align=center class="ending">If you would not like to receive email communication from Truly Nolen in the future, please <a href="http://newsletter.tnolen.com/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]">click here</a></TD></TR></TABLE></BODY></HTML>

File Import error: Could not read from source (OS X 10.8.2)

I am having this time-wasting problem on a new Creative Cloud CS6 installation. I queue my Premiere exports normally on AME (CS6 updated versions), and they work fine if I start them right away. If the Mac is restarted however, they will fail giving this error. The log shows "Could not read from the source. Please check if it has moved or been deleted". It looks for the source file at /Users/Username/Library/Caches/Temporary/projectname.prproj. Isn't AME supposed to hold the queue even after a shutdown/restart? Premiere has been uninstalled and reinstalled once, so maybe that's the cause of it? Thanks.

Unfortunately, it looks like you've found a bug, an unplanned interaction between Premiere Pro's choice of temp directory and automatic OS behaviors.
Jeff is correct, AME will hold the Queue between reboots. The problem is with the temporary project that Premiere creates.
When you queue a sequence to AME from within Premiere (File > Export > Media, click the Queue button), Premiere creates a copy of the project in that temp directory. That is the file reference it sends to AME.
The problem is that Mac OS appears to flush that directory on reboot. Thus, when you reopen AME, it can't find the file anymore.
The bug is therefore that Premiere Pro is putting the file in a place where it can be deleted before being used. Sorry about that. I'll file the bug.
You can work around the problem using a different method to add your sequence to the AME queue. Inside AME, use the File > Add command. You can also drag and drop the sequence icon from the Project panel in Premiere to the Queue panel in AME. Or you can just not reboot until you've rendered what's in the queue.
I suppose it's possible that you could make Mac OS not flush the temp directory on reboot. There's a lot of fun things you can do in Terminal if you know the right commands. That's beyond my personal skillset.

Encore CS4 error "could not read from the source file"

- Source File: C:\Users\Anil\AppData\Local\Temp\2013 11 08 c Big Budha_9.prproj
- Output File: F:\Adobe Encoded Blu-ray\For Disk #013\Disk#013-B\2013 11 08 c Big Budha.m2v
- Preset Used: Full HD 1080i [MPEG] 30 MBPS
- Video:
- Audio:
- Bitrate:
- Encoding Time: 01:49:53
25-Jan-14 2:50:32 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
i have tried creaeted a NEW Premiere Pro project and still get the same error again ... can someone help me to figure out what is wrong ...

Hi Neil
I have been using file names with spaces and it has been working fine. As stated in reply to Jones, uninstall and reinstall of Premiere Pro CS4 has helped to get rid of this error.
also i did not use Dynamic link, but was trying to create MPEG file using Media Encoder and then import it in Encore.
your suggestion for H264 seems good and will try it.
x264 Pro is for CS5 and above versions, so it seems i can not use it and have to manage with Adobe Media Encoder's default. Hope i will not have any major technical issues.
please suggest me for below:-
1) i have 4 hours of Full HD footage and made 1080i MPEG2 files of 30mbps to fit in 2 seperate Bluray Disks.
2) now i plan to put all in one Single Bluray Disk by reducing MPEG2 file average data rate to 15mbps. will that work or is there any limitation of time in Bluray Disk.
3) Will it be ok to create H264 files at 30mbps [as you mentioned H264 reduces file size to half of MPEG] and still be able to fit 4 hours footage in one BR Disk ?
4) even though i specify Min 10 Target 25 Max 30 data rate for MPEG files creation, it creats file at data rate of 30 mbps, can you explain why it is happening as i thought my target rate should be 25 mbps and not the maximum rate specified.
Thanks ...
PS...
my source file is .mov 1920 x 1080i 29.97 fps from Canon 6D. first i tried to create progressive file in Encoder but while imported in Encore realised at 29.97 fps, it allows only interlaced file and had to transcode back to interlaced. so i stick to interlaced file.
Canon 6D also allows me to shoot in 24fps [motion movie] which Encore can handle as progressive file for authoring. What are the pro and cons of shooting in 24fps, if you can suggest.
Message was edited by: AnilHVarma

"could not read the file because the plug-in could not understand the file."

"could not read the file because the plug-in could not understand the file."
I keep getting this error when trying to open some of my illustrator files. Usually after trying 5 or 6 time it will mysteriously open without a problem. I've reinstalled Illustrator and that didn't work. I've uninstalled and reinstalled CS3 and that didn't work.
Why does it sometimes open and sometimes not???
I've lost I don't know how many hours screwing around with this and REALLY pissing me off!!!
AURGH!

I think this has something to do with the PNG plugin.

Error 105, Could not read full block (2048 bytes) from checkpoint file ~/dirchk/sdfsdj.cpe

Hi expert,
i am getting below error in goldengate due to mount point full and i released the space and still the same error for all gg processes. i can see the *cpe cpr file become 0 bytes. so i deleted and re added the extract and repliacat and while adding the replcat i used add replicat checkpoint table because of that multiple entries of same replicat came in checkpoint table . my checkpoint details also present in ./GLOBALS. now my doubt is if add replicate with mentioning checkpoint table name will duplicate entry will be created or what is the work around for this.
MANAGER RUNNING
Invalid checkpoint for EXTRACT qqqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXX)
Invalid checkpoint for EXTRACT qqq(error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXX)
Invalid checkpoint for REPLICAT qqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXXX)

Hi Kariyath
Increase the page size of your windows machine.Check for the recommanded page size.Remember that the recommanded page size should be the lower limit.If you have any issue feel free to ask.Your prob will be solved
Award suitable points

"Could not read Domain.site2 file."

Similar Messages

Maybe you are looking for