"could not read preview"

After I upgraded from LR 5 to LR 5.3, I can no longer review previews of photos for importing from my Canon EOS 60.  I was able to do this before the upgrade.  Also, after I crop a photo, the "DONE" feature at the bottom right is no longer there.  Another question.  I am not able to play any of the Adobe Tutorials.  What is up with that?  Thanks in advance for your help.  JWT

Thanks for the suggestion. I guess that's an option, but it is kind of annoying that it is not possible to use the cable from the camera to the computer. Not a big deal, but thought it was worth checking if other A77 users have experienced the same problem, and if there is a fix. After all this works fine on my old A350.

Similar Messages

  • Could not read preview - A77

    When connecting my Sony A77 to the computer in order to import photos to Lightroom 3.5 I am not able to doubleclick on the tumbnail to show preview of the thumbnails. The thumbnails are showing, but it seems to be very low resolution, and when doubleclicking on a thumbnail the message "could not read preview" is displayed. If I remove the memory card from the camera and put the memory card into the cardreader on my laptop I can view high resolution thumbnails, and also get previews. Any suggestion?

    Thanks for the suggestion. I guess that's an option, but it is kind of annoying that it is not possible to use the cable from the camera to the computer. Not a big deal, but thought it was worth checking if other A77 users have experienced the same problem, and if there is a fix. After all this works fine on my old A350.

  • JDevloper 10.1.3 OC4J - SEVERE: Could not read manifest of

    I have a struts based web application in my JDeveloper 10.1.3. Everytime I run the application I get the error logs displayed below before the application starts, usually this takes about 20 seconds. Please advise what could be causing this error.
    [Starting OC4J using the following ports: HTTP=8989, RMI=23892, JMS=9228.]
    C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config>
    C:\Oracle\jdev1013\jdk\bin\javaw.exe -ojvm -classpath C:\Oracle\jdev1013\j2ee\home\oc4j.jar;C:\Oracle\jdev1013\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config\server.xml
    [waiting for the server to complete its initialization...]
    05/08/04 11:18:46 Node started with id=127765687050882
    Aug 4, 2005 11:18:48 AM com.evermind.server.ejb.EJBPackageDeployment isIIOPConfigured
    INFO: Beans associated with application default will not be available via RMI/IIOP: GenerateIIOP system property=false, enableIIOP application setting=false, server.xml configured for IIOP=false
    Aug 4, 2005 11:18:48 AM com.evermind.server.ejb.EJBPackageDeployment isIIOPConfigured
    INFO: Beans associated with application default will not be available via RMI/IIOP: GenerateIIOP system property=false, enableIIOP application setting=false, server.xml configured for IIOP=false
    05/08/04 11:18:48 done.
    05/08/04 11:18:49 Copying default deployment descriptor from archive at C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config\connectors\datasources\datasources/META-INF/oc4j-ra.xml to deployment directory C:\Oracle\jdev1013\jdev\system\oracle.j2ee.10.1.3.3.51\oc4j-config\application-deployments\current-workspace-app\datasources...
    05/08/04 11:18:49 done.
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 6562 ms.
    Target URL -- http://192.168.102.18:8989/cusweb/page_start.jsp
    05/08/04 11:18:50 Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 3 initialized
    SEVERE: Could not read manifest of: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/CuswebException.class (from <classpath> in U:\nsf\development\CusWeb\public_html) Caught java.util.zip.ZipException: error in opening zip file
    SEVERE: Could not read manifest of: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/HttpConstants.class (from <classpath> in U:\nsf\development\CusWeb\public_html) Caught java.util.zip.ZipException: error in opening zip file
    << could not read manifest appears for all classes >>
    SEVERE: Unable to access code-source: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/CuswebException.class (from <classpath> in U:\nsf\development\CusWeb\public_html). Caught java.util.zip.ZipException: error in opening zip file
    SEVERE: Unable to access code-source: /U:/nsf/development/CusWeb/public_html/WEB-INF/classes/org/nsf/cusweb/HttpConstants.class (from <classpath> in U:\nsf\development\CusWeb\public_html). Caught java.util.zip.ZipException: error in opening zip file
    << Unable to access code-source appears for all classes >>
    --------------------------------------------------------------------------------------------------------------

    I have same problem. Did you have any chance to find out what cause of it?

  • Photoshop/Bridge CS6 Could not build preview because of a disk error: Mac10.8.2

    The crashes always occur while editing a photo  in the Camera Raw editor in Bridge (most of the time they are JPG files, yes you can edit JPGS in the Adobe Camera Raw editor) and then hit the "Open Image" button that will open the image in Photoshop. That's when things lock up. Often Bridge, Photoshop and InDesign all are "not responding" and have to be force quit.
    Always when I'm editing a photo in Photoshop that is on a server I get the " Could not create a preview because of a disk error message" which I have to hit the OK button to clear. I just tested this several times and I never get the disk error message when editing an image from my hard drive. I suspect there is a network communication problem.
    MacBook Pro 15" Early 2011
    2.2 GHz Intel Core i7
    8GB 1333 Mhz DDR3 RAM
    AMD Radeon HD 6750M 1024 MB
    OS 10.8.2 (12c60)

    I am having the same problem.  I work off of a server too and I get the "Could not create preview because of a disk error" message too.  The actual preview itself is there once I hit OK but this is so annoying because it keeps me from batch processing images.  The message comes up for each image you try to save out so you have to set there and hit enter between each image when you run an action.  Any help to correct this error would be greatly appreciated!  Thanks.

  • PS CS4 Error: Could not build preview because of a disk error

    I have been using this version of Photoshop without any problems for about two years, and then I upgraded to OS X Lion last week and now I get a disk error when I try to save a file.  The message says "Photoshop could not build preview because of a disk error".  I tried to save the file to a thumb drive, but I get the same problem.  I believe I also got a scratch disk error one of the times as well.  Anyone have any ideas on how I can fix this?  I have already downloaded the latest update.  I have tried restarting my computer.  It works ok for a few times after restart but then the error returns.

    I guess it could be a coincidence, but since this started happening right after I installed OS X 10.7 I have to think it has something to do with that.  I'll try using the repair disk utility... Don't have a 10.7 disk since i installed from the app store, so not really sure what steps to take.

  • "Could not play preview" on 3GS (OS 4) for any Itunes store track

    1. This has only occurred since my OS 4 upgrade
    2. I have full wifi net access (and can connect to the store OK)
    Basically every time I try to preview a song I get the message "Could not play preview" very annoying!

    Hi again, I'm still seeing the problem consistently. Does anyone have any suggestions? Linksys did not have any solutions for me, either.

  • ITunes Wifi Could Not Play Preview

    Hi all
    My iPhone is exhibiting some odd behavior. The iPhone's Safari, Google Maps, applications, etc. work great on my home wifi network. However, I am experiencing two problems with iTunes and Youtube apps. First, in the iTunes Wifi store, for example, I can browse songs and even purchase/download them. However, I am not able to play a preview. Each time I tap a song to hear the preview, I get the error message "Could Not Play Preview." Second, in the YouTube application, I can browse videos, but as soon as I select one to view, I get the error message, "This movie could not be played." This problem happens consistently on my home WiFi network. Oddly, both features work fine on EDGE or on a different WiFi network.
    Therefore, I have narrowed the issue down to my wireless router, but the router works great! I have never had any problems with it until these isolated iTunes WiFi store and Youtube problems. So, you're probably saying to yourself, well, you should really be on a Linksys forum right now. But, because these are isolated issues on the iPhone, I thought this would be the best place to try first.
    Has anyone seen this problem before? Does anyone have a solution? Is there a port or something I need to open on the router or on the iPhone? I would appreciate any help. Below are my phone and wireless router stats.
    iPhone (1st generation)
    Latest firmware (2.0.2)
    No 3rd party alterations
    Linksys BEFW11S4 V2.0 wireless router
    Latest firmware (that I can tell)
    Broadcasting with MAC Address filter
    Thanks!

    Hi again, I'm still seeing the problem consistently. Does anyone have any suggestions? Linksys did not have any solutions for me, either.

  • Adobe Media Encoder for CS4 error Could not read from the source

    Hello,
    I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
    - Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
    - Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
    - Preset Used: NTSC DV
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 16:10:34
    1/21/2009 9:50:25 PM : Encoding Failed
    Could not read from the source. Please check if it has moved or been
    deleted.
    Thank you
    Art

    When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
    If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
    Do one or both of the following solutions:
    Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
    Close all Adobe applications.
    In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
    Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
    Rename the newly created shortcut to just Premiere.
    Important: The name of the shortcut must be exactly Premiere with no other characters.
    Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
    Move the Premiere shortcut that you created into the dynamiclink folder.
    Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
    Do one of the following:
    Windows XP: Choose Start > Control Panel > Add or Remove Programs.
    Windows Vista: Choose Start > Control Panel > Programs and Features.
    In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
    Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
    Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
    Re-install your Adobe software.

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Media Encoder crash in CS6. Could not read from the source. Check if it has moved or been deleted.

    I'm having a problem getting Media Encoder to get past the dynamic link portion of encoding a time line sequence.
    I can send it over to Media Encoder, but it crashes consistently after the yellow bar saying something about dynamic link.
    I have CS6 installed in my computer here at work, it previously had CS5.5 installed on it.
    I read some answers about CS4 having this problem and tried to create a shortcut and put it in the dynamic link folder, but that didnt work.
    I would hate to have to reinstall the software here at work as the IT department is a pain- but I can't encode video on one of the computers we use here.
    Any ideas on what may be happening and how I can solve the problem?
    Thanks!
    Its a Dell Workstation with Windows 7 Ultimate installed dualE5620 processors at 2.4GHz. .
    only 6 GB RAM, and a RAID 5 hard drive setup with 3- one gb drives giving the C drive space of 1.8Gigs
    Its got an NVIDIA Quadro NVS 420 video card.
    I'm upgrading this computer to better work with editing video, so this is a good time to get this all cleaned up.
    Im adding RAM (24GBs)- replacing the video card to a GTX 780 3GB running 3 monitors.
    I'd also like to either split up the RAID (ugh)..or just add 2 internal SAS HDDs. to split up the video and the cache and the OS/programs as is usually done with editing video.
    Thanks for your help in advance...
    Mike

    ...more information...problem still not solved....
    After searching more in the forums, I tried a couple more things:
    I tried to restart AME and clearing the preferences. This didnt help.
    I also deleted the ...appData/Roaming/Adobe/AdobeMediaEncoder/6.0 folder and all subfolders   No help here either.
    I also tried to import the sequence via AME rather than export via PP. This worked. The sequence loaded immediately and processed perfectly.
    When I export via PP, I hit the queue button, it hangs for about 3 mins, then the yellow bar appears saying "Connecting to Dynamic Link server"
    it then hangs for approx 3 mins again and then I get the Failed alert.
    the error log reports:
    Encoding failed
    Could not read from source. Please check if it has moved or been deleted.
    any help available here????

  • Error: Could not read Header Mapping in Receiver Agreement

    Dear SAP experts,
    Newly installed SAP G7A PI 7.1(Acceptance box) was already released to customer.
    We are doing an initial test (BAT phase), wherein, our end-to-end scenario is, from a EP Portal application  --->  G7A PI 7.1   -->  Trading Partner via AS2 protocol.
    G7A PI is connected to Trading Partner via AS2 protocol.
    Currently, our EP Portal application is in-active at the moment, that's why we used 'manual XI submitter', to send a message from G7A PI itself going to Trading Partner.
    The message was success in the Integration engine of  G7A PI, and the output message was produced.
    As the message reached the Adapter Engine layer of G7A PI, we encountered a specific error,
    Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String), Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String)
    Basically, "Could not create CPAObjectMapper - InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement"
    I am thinking, one of the possible cause is that we used manual XI submitter, in G7A PI, instead of the utilizing the actual Sending system (EP Portal application).
    Or possible cause is that the AS2 adapter in G7A is not yet stable, thus causing the issue.
    We've already done successful connection when we're in GDD PI (Development box) during our SIT phase.
    Objects in G7A were mirror of GDD PI.
    Kindly advise for your inputs.
    Thanks!
    Gerberto

    Hi,
    It seems that the cause of the error is the unstable performance of the PI box, since, this was newly installed and there were patches that were not yet added.
    Thanks for the support!
    Gerberto

  • ERROR:Could not read archive file - during Processing Base System Part 2

    Hi there,
    What I have:
    * I have problem with installation of the Mac OS X Panther v10.3 on iMac.
    * I have 3 original CDs (black with silver X).
    What I did:
    * I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
    * I verified disk over this utility - that was ok - HFS volume verifed.
    * Then I restarted the computer and ran installation from this first CD
    What happened:
    * installation did not finish, because there were some problems during installation process.
    * i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
    Installation log:
    After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
    Checking your installation disk - OK
    Preparing disk - OK
    Preparing base 1 and 2 - OK
    Other preparing.. - OK
    Processing Base System Part 1 - OK
    Processing Base System Part 2
    ==
    ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
    ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
    last message repeated 2 times
    ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
    Some files for Essentials may not have been writen correctly.
    root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
    Install Failed
    Error detected
    Name: NSGenericException
    Reason: Some files for Essentials may not nave been written correctly. (code 1)
    ==
    It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
    Thank you!

    Tomas,
    On THIS Page, locate your iMac model.
    From the Documents column, click on the appropriate number link.
    Using the info in the document that opens, locate the serial number of your iMac.
    On THIS Page, in the text field for Search Tech Specs, enter that serial number.
    Click on the model of iMac that appears.
    Post a link to the page that opens, or post the info requested below.
    Exactly which model iMac is it?
    What is the Processor speed?
    What size is the Hard Drive?
    How much Memory is installed?
    What type of internal Optical Drive does it have?
    Which version of OS, was the original Installed Software?
    ali b

  • Could not read the profile path for user S-1-5-21-1272265863-3531003469-187

    hi
    I was doing the installation of the crm702 on MAXDB+WINDOWS.IN THE FIRST PHASE OF EXECUTION(CREATE USERS FOR SAP SYSTEM) I GOT THE ERROR MENTIONED BELOW.CAN SOMEONE HELPE ME    :
    An error occurred while processing option Enhancement Package 2 for SAP CRM 7.0 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step: Could not read the profile path for user S-1-5-21-1272265863-3531003469-18741865-1021 from the registry: The system cannot find the file specified. .). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:/crmfeb.

    Hi,
    Delete all keys in registry (regedit) with: S-1-5-21-1272265863-3531003469-18741865-1021. You can do it by find it - F3.
    After that restart sapinst.
    Regards.

  • Problem: 'Could not read from source' when exporting project.

    Hi everybody
    I am using Adobe Premiere CS4 on my MacBook Pro 15'' (i5 processor, 4 GB RAM, 500 GB Harddisc, 256 MB video memory (high-clockspeed))
    Everything works well except of one big thing, every time when i try to export my finished project the Media Encoder tells me always the same thing directly after pushing the start button. 'Could not read from the sorce. Please check if it has been removed or deleted'.
    I tried removing any offending plugins, i fixed the disk permissions.. But it all doesnt matter anything.
    No matter what i try to export, no matter in what file format. It just doesnt work. I even tried exporting a project which only contains a video file of 5 seconds without anything more but it just doesnt work. Its impossible that i have touched or modified or replaced any source files...
    Some help would be very very appreciated!!
    Martijn

    Welcome to the forum.
    Perhaps this Adobe KB Article will be able to help you.
    Good luck,
    Hunt

  • "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"

    Hi,
    I've already archived a lot of assets in my final cut server but since one week there is a message appearing when I click on an asset and choose "Archive". The pop-up says: "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"
    Does anyone know what's the problem and/or have any suggestions to solve my problem?! I can't archive anymore since the first appearance of this message.
    What happened before?
    -> I archived some assets via FCS and then transfered the original media to an offline storage media. That system worked fine for the last months and my normal server stays quit small in storage use. But now, after I added some more new productions and let FCS generate the assets, it doesn't work anymore...
    It's not about the file size - I tried even the smallest file I found in some productions.
    It's not a particular production - I tried some different productions.
    It's not about the storage - there's a lot of storage left on my server.
    So, if someone knows how get this server back on the road - let me know.
    THNX!
    Chris

    I would really appreciate some advice re: recent FCS search errors.
    We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
    Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
    OS 10.6.x updates.
    FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
    Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
    FCS has been running fine for last 4 years, minus the recent Java security issues.
    Thanks in advance, any ideas appreciated!
    cheers,
    Aaron Mooney,
    Post Production Supervisor.
    Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
    epn.tv

Maybe you are looking for

  • How can I remove high-pitched distortion from voice-over?

    Hi folks, I'm completely new to fixing audio. I am making a short film, and for a voice-over, I recently had to do an interview over the phone (the subject lives in a very remote location). Actually, I used GoToMeeting, we called into the conference

  • Space issue in Firefox related to Flash banner

    I have a website with validated XHTML and CSS that displays an unwanted space only in Firefox under a Flash banner.  The site has been tested in IE6/7/8, Firefox, Chrome, Safari, Opera, AOL, and Netscape.  Firefox is the only problem.  After posting

  • CREATE file, SAVE a copy on local mechine, UPLOAD a copy to remote server

    Hi all, I have a question to ask here, i am developing a pure java app (client/server) which hopefully can 1) client > create a file (abc.txt for e.g) save a copy in local mechine, 2) upload the file to remote server that currently connected (conside

  • Need a driver for HP Color LaserJet

    Hi, Need a driver for my printer and I can´t figure out how I can get it. I have Mac OS X version 10.8. Please help! Regards, Lena-Maria

  • Function in free Adobe Reader apps for iPad (highlight pen)

    I wonder for the free Adobe Reader apps that I can found in Apps Store. Do its function are the same as those normal Adobe Reader, which is designed for using on PC / laptop? Any function in the free Adobe Reader apps will be missing due to the desig