"could not read the file because the plug-in could not understand the file."
"could not read the file because the plug-in could not understand the file."
I keep getting this error when trying to open some of my illustrator files. Usually after trying 5 or 6 time it will mysteriously open without a problem. I've reinstalled Illustrator and that didn't work. I've uninstalled and reinstalled CS3 and that didn't work.
Why does it sometimes open and sometimes not???
I've lost I don't know how many hours screwing around with this and REALLY pissing me off!!!
AURGH!
I think this has something to do with the PNG plugin.
Similar Messages
-
Itunes could not connect to the ipad because an invalid response was received from the device
Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now. -
Dears,
I have installed VMware server 2.0.2 in Windows 7, everything is working but one thing not...
When I control my VM by VMware remote console, sometime It(VMware Infrastructure Web Access) tell me "The VMware Remote Console Plug-in is not installed or could not be found" even I have installed it many time.
What can I do?The following workaround works on Windows for any browser.
(1) install the plug in. Never mind that it does not work.
(2) locate the executable vmware-vmrc.exe, this is typically in the following directory
"C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in"
(3) Obtain the virtual machine ID from the links for the VM in the web UI. e.g. the following is machine ID 192
https://servername:8333/ui/#{e:"VirtualMachine|192",w:{t:true,i:0}}
In IE you get these by selecting the link and then looking at its properties using right click.
If you are really keen and want to write something more sophisticated the VM ID codes seem to be in:
C:\Documents and Settings\All Users\Application Data\VMware\VMware Server\hostd\vmInventory.xml
(4) you can then create a COMMAND file or shortcut on your desktop (for the example above).
"C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in\vmware-vmrc.exe" -h localhost:8333 -M 192
When you use this link you will need to log in using the webui username and password, and it will start the VM if it is not running.
(5) I use the following batch file (I am old school), as an icon on my desktop. I have not tried, but it should work from ANO desktop provided the VRMC is installed on the client and the script uses the correct IP for the host.
Hope that helps someone and saves them the time I have just spent.
@echo off
:loop
echo.
SET X_line=----------------------------------------
echo %x_line%%x_line%
echo This 'force' loads the VMWare Console for the designated VM
echo Loading this console will force start the VM if not already loaded
echo You will need to know the administrator access username and password.
echo %x_line%%x_line%
echo.
echo fubar VM 1 = 112
echo fubar VM 2 = 192
echo fubar VM 3 = 368
echo.
:: SET /P variable=[promptString]
SET /P X_machine_id=Please enter the machine ID number:
echo.
echo CTRL-C to exit
SET /P x_confirm=Please confirm you want to start machine ID %X_machine_id%, Y or N:
if /i NOT {%x_confirm%}=={Y} GOTO :loop
PUSHD "C:\Program Files\Common Files\VMware\VMware Remote Console Plug-in"
START vmware-vmrc.exe -h localhost:8333 -M %X_machine_id%
POPD
echo DONE
exit /b -
How i fix the problem on windows 7 itunes could not connect to the iphone because an invalid response was received from the device
take a look at https://discussions.apple.com/message/24243668#24243668. i had this problem and that solved it for me.
-
does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"
Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup
-
Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115 -
when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
1.) How do I organized my photo album on my ipad?
2.) How do I remove an album on my ipad?
3.) i have taken over 1,000 photos on ipad, now it won't sync stuff to the ipad because it said there is not enough space. I want to delete some past synced photos from the computer to create space, but I don't know how to find it on computer. It sycned a portion of a file onto the ipad which is useless to me so I want to delete it all & start fresh.
4.) I was thinking about copying some of those photos over so it would show up as new data maybe then it would sync to my ipad as a new & competed album. Or will this create more problem because it would only be creating more photos?
5.) By the way, I don't know how to use dropbox or anything like it, so I take photos of some files & web screen that I use regularly to always have access regardless of internet access. That is why I have so many photos. But I want to be able to separate & organized them by files, web screens, or topics. I also want to be able to delete & update as needed.
6.) If needed I am willing to delete 4 G of downloaded app to create space. Will this help the space issue? Also could I just leave the downloaded app to my computer only & only sync to to ipad as needed, since I don't need app as regularly. I NEED "photo" ALL of the TIME! I am out in the field, instead of carrying stack & stack of papers, I carry ipad with photo of these daily needed papers!1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad -
Does it matter if the lightning cable is plugged in but not connected to an electrical outlet? Will this drain the ipad battery? We use an ipad cart at school, and some of the teachers will connect all the ipads up to the cart, but then neglect to power up the cart. The laptop with the cart has already had the battery wrecked because of this (within a two month period), and I am concerned the ipads may have an issue if this continues to happen. I need some reassurance before I make the other teachers paranoid!
ok this one is kind in the gray area for me. I say if it is plugged in to a power up cart but not plugged in to a outlet, then all is is doing is not charing, and of course lossing a charge over time in standby, not really causing any issues. User guide and apple sites say it will drain the battery life.
Important: The iPad battery may drain instead of charge if iPad is connected to a computer that’s turned off or is in sleep or standby mode, to a USB hub, or to the USB port on a keyboard.
however “Battery life” means the time your iPad will run before it must be recharged.
so I think it will be ok, as long as you charge it as usaul it should be fine.
just use these links for and understanding for batteries and the ipad, of course the user guide. -
I can not update my phone because itunes says i am not connected to the internet, but i am connected
I can not update my phone because itunes says i am not connected to the internet, but i am connected to the internet.
Download the last IOS you need and install it.
Download iOS 4.3.5 Links
iOS 4.3.5 download (iPad)
iOS 4.3.5 download (iPad 2) (WIFI)
iOS 4.3.5 download (iPad 2) (GSM)
iOS 4.3.5 download (iPhone 4) (GSM)
iOS 4.3.5 download(iPhone 3GS)
iOS 4.3.5 download (iPod touch 4th generation)
iOS 4.3.5 download (iPod touch 3rd generation)
Step 1: Download and install latest version of Apple iTunes
Step 2: Sync your iPhone with iTunes
Step 3: From iTunes sidebar, select your device (in devices section on sidebar)
Step 4: Press and hold Shift key (Windows) or Alt key (for Mac) and click on “Update”.
Step 5: Select the location of .ipsw file you want to restore or load on to iPhone
Step 6: That’s all from your end, now iTunes will perform some automated steps to complete the installation. Your iPhone will restart once the progress is complete.
Good luck !! -
When I downloaded the latest version of Firefox, the print was so small I could barely read it. what do I need to do to enlarge the print without losing some of my tool bars...?
== When I downloaded the latest version of Firefox, the print was so small I could bvarely read it. what do I need to do to enlarge the print without losing some of my tool bars...?THIS ISSUE IS RESOLVED FOR ME.
When I opened this pop-up to view the settings (File > Page Setup > "Format & Options": Scale ), the Scale value was 40%. Changing it to 100% corrected the issue I observed.
To my knowledge, I have not been inside this pop-up window before to set the Scale option. Could this value be affected by other actions within Firefox? I noticed this while using v12 which was installed 24Apr2012.I know it worked correctly since that installation, so why did the Scale value change?
UPDATE: I just realized that the Scale option in print preview sets the Scale value in the settings. NOTE TO ALL: This is a sticky setting, not just a setting for a specific output request. -
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.
This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene -
I have an image that I removed from its back ground and I would like to scale the bottom portion of the image because its to wide but not have that effect the top portion of the image which is the correct width. but also keep the aspect ratio correct, keep it looking as natural as possible (its a piece of jewlery) ? how can I begin to do this.
The area circled in red is to wide (the width) the necklace's width is as wide as the models entire chest. And also the length of the necklace it's to long it should come down to the clevage area on the model/woman.
-
I followed the directions to install the IOS 7.0.6 update to my Ipad Mini, but when I click on install and agree to terms & conditions, it says it is unable to verify the update because I am no longer connected to the internet. Not true. Help.
Ok, got it now. I turned the Mini off and rebooted. Seems to be working fine now.
-
Where is the bookmarks stored?
I Install the Firefox once again since I upgrade my computer.
And I try to move the bookmarks from the old computer to the new one.
But I can't find anyone of them.
Is there any folder just like "favourite" to store the html file?
I really want to find out the bookmarks because actually i can't remember all the website that are important to me~ URGENT!!!~THANKS~You can move file named places.sqlite from your old profile to the new one. It contains bookmarks and browsing history.
Here's a knowledge base article about it: [[Recovering important data from an old profile]]
If you don't care about saving your current bookmarks, you can skip creating new profile (Firefox does it by itself at first run anyway).
I'd might suggest you to install addon https://addons.mozilla.org/en-US/firefox/addon/2410/|Xmarks Bookmark and Password Sync]. It is a free web service which synchronizes bookmarks and (optionally) passwords with central server, and then to other computers, if you installed it on more. You may treat is as a backup too. -
ITunes cannot sync photos to the iPhone because your iPhoto Library is not yet available.
I've turned my iPhone 4 into a iPod, meaning I only use it to hold music for my workouts. Ever since I've upgraded to Yosmite I can't sync my iPhone 4 to iTunes anymore. I can back it up, but I can't sync. Each time it tells me "iTunes cannot sync photos to the iPhone because your iPhoto Library is not yet available" I don't want to sync any photos, just music.
I've tried to repair my iPhoto Library, restarted my Mac, restarted my iPhone 4 but I still get his error message.
In iTunes when I select my iPhone 4 > Photos, I just get a spinning wheel.
Any thoughts??I can't follow the first link since I just get a spinning wheel for photos.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.
Maybe you are looking for
-
Hi there! Please, first, promise not to laugh! In the script, I wrote: text_field.text = "yes"; var a:String = text_field.text; At the beginning of a conditional logic statement I want to use the value of this variable. How should I write the conditi
-
Exchange was deployed without a CASArray, need help with array settings and PRF to fix.
I'm standing up a new Exchange 2010 server to replace old hardware (not going 2013 at this time) and found out the hard way that the person who built the old 2010 box never created a CASArray. I've created one and applied it to the mailbox DB on the
-
Strange goings on here with my Libraries: Projects opened from Projects View are no longer (3.3) selected on the Library tab of the Inspector. When, in Projects View, I double-click a Project, that Project's contents are shown in the Browser, but th
-
Authentication error occurred code 8007ffff
When attempting to access Windows 2012 R2 server using Remote Desktop on another Windows 2012 R2, I receive this message: authentication error occurred code 8007ffff. Windows 7 doesn't have this problem. Bob Lin, MCSE & CNE Networking, Internet, Rout
-
Hello Friends, I am having a requirement of maintaining minimum stock level at a location. I want to mainatin stock of one material code at a particular location say one quantity of finished good should be there at a location but user s