Could not register this tablet (30010
please help! ive bin saving for a while to get a playbook nd finally got one ysterday. i was so tired nd cudnt set it up ysterday. however today, when i did try to set it up over my office wifi, it just keeps on telling me could not register this tablet (3001) check settings. ive tried updating it over the pc using dm nd the stuff has simply refused to download. the download status bar is just simply stuck in one spot. some1 please help!. nd hey rim guiys help out. the stuff cost me two monhts wages nd i aint even enjoying it one bit!
"dat"? "bin"?
Could you please turn off your ALL CAPS key? I am sure you're frustrated, but you're not frustrated with me. I am trying to help you.
So, do you have a good internet connection on the PC you're connected to?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
bought a new ipad on amazon tried to register it but could not does this mean it was not new altho it was sealed and sold as new its a gen 3 model mc744LL/A and will it have the year warranty if not able to register
It's possible it is used.
New and used > Amazon.com: ipad 3
Contact Amazon support > Amazon.com Help
They should be able to tell you if it it's used. -
Could not register a HeartbeatMonitorListener
Hi!
Saw a different posting on this subject and have exactly the same
problem. I have 2 local servers, one WLS 7 server and the other is
Weblogic 8. I want messages sent to the WLS7 queue accessible from the
WLS 8 queue. WLS 7 runs on port 7001, and WLS 8 on 8001.
JMS Config for WLS 7:
============================
- JMS Config factory:
Name: WLS 7 Connection Factory
JNDI Name: rps.refapp.jms.jms_connfactory
- JMS Queue:
Name: WLS7
JNDI Name: jms.wls7.q
Foreign JMS Config for WLS 8:
=============================
- Foreign JMS Server:
Name: MyJMSServer
JNDI Initial Context Factory: weblogic.jndi.WLInitialContextFactory
JNDI Connection URL: t3://localhost:7001
- Foreign JMSConnection Factroy:
Name: WLS 7 Connection Factory
Local JNDI Name: jms.wls7connfactory
Remote JNDI Name: rps.refapp.jms.jms_connfactory
User Name: system
Password: weblogic
- Foreign JMS Destinations:
Name: WLS7
Local JNDI Name: jms.wls7_queue
Remote JNDI Name: jms.wls7.q
I have an MDB deployed on the WLS 8 server with no funtionality except
sending the contents of a message to system.out. Here is the contents of
the weblogic-ejb-jar:
<weblogic-ejb-jar>
<description><![CDATA[Generated by XDoclet]]></description>
<weblogic-enterprise-bean>
<ejb-name>MessageListener</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>1</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>jms.wls7_queue</destination-jndi-name>
<initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
<jms-polling-interval-seconds>5</jms-polling-interval-seconds>
</message-driven-descriptor>
<reference-descriptor>
</reference-descriptor>
<jndi-name>MessageListener</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
And here is the stacktrace after deploying the bean:
<2003-dec-15 kl 17:51 CET> <Notice> <WebLogicServer> <BEA-000327>
<Starting WebLogic Admin Server "myserver" for domain "mydomain">
<2003-dec-15 kl 17:52 CET> <Warning> <EJB> <BEA-010061> <The
Message-Driven EJB: MessageListener is unable to connect to the JMS
destination: jms.wls7_queue. The Error was:
[EJB:010196]'weblogic.jms.common.JMSException: Error creating session'
Linked exception = 'weblogic.jms.dispatcher.DispatcherException: Could
not register a HeartbeatMonitorListener for
[weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver'
weblogic.jms.common.JMSException: Error creating session
at
weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:798)
at
weblogic.jms.frontend.FESession.consumerCreate(FESession.java:1036)
at weblogic.jms.frontend.FESession.invoke(FESession.java:2550)
at
weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:609)
at
weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:153)
at
weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1814)
at
weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1645)
at
weblogic.jms.client.JMSSession.createReceiver(JMSSession.java:1484)
at
weblogic.ejb20.internal.JMSConnectionPoller.setUpQueueSessions(JMSConnectionPoller.java:1598)
at
weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:1833)
at
weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:1076)
at
weblogic.ejb20.internal.JMSConnectionPoller.startJMSConnectionPolling(JMSConnectionPoller.java:830)
at
weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.start(MessageDrivenBeanPoolInfoImpl.java:234)
at
weblogic.ejb20.deployer.EJBDeployer.deployMessageDrivenBeans(EJBDeployer.java:1583)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1411)
at weblogic.ejb20.deployer.EJBModule.start(EJBModule.java:668)
at
weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2017)
at
weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2058)
at
weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2005)
at
weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3136)
at
weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1688)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:407)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:230)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:964)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:359)
at weblogic.Server.main(Server.java:32)
Caused by: weblogic.jms.dispatcher.DispatcherException: Could not
register a HeartbeatMonitorListener for
[weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver
at
weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:309)
at
weblogic.jms.dispatcher.DispatcherManager.dispatcherFindOrCreate(DispatcherManager.java:356)
at
weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:796)
... 26 more
Caused by:
weblogic.rmi.extensions.server.HeartbeatMonitorUnavailableException:
Could not register a HeartbeatMonitorListener for
[weblogic.jms.dispatcher.DispatcherImpl@1970ae0]
at
weblogic.rmi.extensions.server.HeartbeatMonitor.addHeartbeatMonitorListener(HeartbeatMonitor.java:86)
at
weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:305)
... 28 more
>
Well, I'm out of ideas, so I hope someone can help me out. This is a
fairly simple problem to duplicate. I can send more details as well.
Thanks in advance,
/Eje Thorarinsson
Hi!
Saw a different posting on this subject and have exactly the same
problem. I have 2 local servers, one WLS 7 server and the other is
Weblogic 8. I want messages sent to the WLS7 queue accessible from the
WLS 8 queue. WLS 7 runs on port 7001, and WLS 8 on 8001.
JMS Config for WLS 7:
============================
- JMS Config factory:
Name: WLS 7 Connection Factory
JNDI Name: rps.refapp.jms.jms_connfactory
- JMS Queue:
Name: WLS7
JNDI Name: jms.wls7.q
Foreign JMS Config for WLS 8:
=============================
- Foreign JMS Server:
Name: MyJMSServer
JNDI Initial Context Factory: weblogic.jndi.WLInitialContextFactory
JNDI Connection URL: t3://localhost:7001
- Foreign JMSConnection Factroy:
Name: WLS 7 Connection Factory
Local JNDI Name: jms.wls7connfactory
Remote JNDI Name: rps.refapp.jms.jms_connfactory
User Name: system
Password: weblogic
- Foreign JMS Destinations:
Name: WLS7
Local JNDI Name: jms.wls7_queue
Remote JNDI Name: jms.wls7.q
I have an MDB deployed on the WLS 8 server with no funtionality except
sending the contents of a message to system.out. Here is the contents of
the weblogic-ejb-jar:
<weblogic-ejb-jar>
<description><![CDATA[Generated by XDoclet]]></description>
<weblogic-enterprise-bean>
<ejb-name>MessageListener</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>1</max-beans-in-free-pool>
<initial-beans-in-free-pool>1</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>jms.wls7_queue</destination-jndi-name>
<initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
<jms-polling-interval-seconds>5</jms-polling-interval-seconds>
</message-driven-descriptor>
<reference-descriptor>
</reference-descriptor>
<jndi-name>MessageListener</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
And here is the stacktrace after deploying the bean:
<2003-dec-15 kl 17:51 CET> <Notice> <WebLogicServer> <BEA-000327>
<Starting WebLogic Admin Server "myserver" for domain "mydomain">
<2003-dec-15 kl 17:52 CET> <Warning> <EJB> <BEA-010061> <The
Message-Driven EJB: MessageListener is unable to connect to the JMS
destination: jms.wls7_queue. The Error was:
[EJB:010196]'weblogic.jms.common.JMSException: Error creating session'
Linked exception = 'weblogic.jms.dispatcher.DispatcherException: Could
not register a HeartbeatMonitorListener for
[weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver'
weblogic.jms.common.JMSException: Error creating session
at
weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:798)
at
weblogic.jms.frontend.FESession.consumerCreate(FESession.java:1036)
at weblogic.jms.frontend.FESession.invoke(FESession.java:2550)
at
weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:609)
at
weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:153)
at
weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1814)
at
weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1645)
at
weblogic.jms.client.JMSSession.createReceiver(JMSSession.java:1484)
at
weblogic.ejb20.internal.JMSConnectionPoller.setUpQueueSessions(JMSConnectionPoller.java:1598)
at
weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:1833)
at
weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:1076)
at
weblogic.ejb20.internal.JMSConnectionPoller.startJMSConnectionPolling(JMSConnectionPoller.java:830)
at
weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.start(MessageDrivenBeanPoolInfoImpl.java:234)
at
weblogic.ejb20.deployer.EJBDeployer.deployMessageDrivenBeans(EJBDeployer.java:1583)
at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1411)
at weblogic.ejb20.deployer.EJBModule.start(EJBModule.java:668)
at
weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2017)
at
weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2058)
at
weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2005)
at
weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3136)
at
weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1688)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:407)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:230)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:964)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:359)
at weblogic.Server.main(Server.java:32)
Caused by: weblogic.jms.dispatcher.DispatcherException: Could not
register a HeartbeatMonitorListener for
[weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver
at
weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:309)
at
weblogic.jms.dispatcher.DispatcherManager.dispatcherFindOrCreate(DispatcherManager.java:356)
at
weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:796)
... 26 more
Caused by:
weblogic.rmi.extensions.server.HeartbeatMonitorUnavailableException:
Could not register a HeartbeatMonitorListener for
[weblogic.jms.dispatcher.DispatcherImpl@1970ae0]
at
weblogic.rmi.extensions.server.HeartbeatMonitor.addHeartbeatMonitorListener(HeartbeatMonitor.java:86)
at
weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:305)
... 28 more
>
Well, I'm out of ideas, so I hope someone can help me out. This is a
fairly simple problem to duplicate. I can send more details as well.
Thanks in advance,
/Eje Thorarinsson
-
I've been trying to verify the domain kailice.co.uk which I own , however I receive the following "Could not verify this domain because it was previously
configured for your tenant or for another tenant."
I believe I verified this domain with a previous trial subscription which has since expired and so I'm unable to login and remove the domain but wish to transition it to my new subscriptionHi Jack,
Each custom domain can only be used in one Azure AD tenant and you can’t add the same domain to multiple Windows Azure AD tenants. In general, if you delete a domain in a Azure directory, then you can add it to another Windows AD Tenant.
I am not sure if you have deleted this domain in your previous trial subscription. But it appears like you have not deleted the domain. Is that right?
Recommend you to check the TXT/MX record in your Domain name register, delete other original TXT/MX records and just keep the TXT/MX record for the new verification.
Also, it needs some time for your domain to update the record, if you still receive the same error, I recommend you to wait for a while and then have a try.
Regards,
Shirisha Paderu -
SID Problem : could not register two ABAP systems with same SID
Dear Expert:
We have to register two ABAP systems on different host to SLD, and these two systems have same SID.
We use rz70 to do this, but we found the lastest registration will overwrite the previous registration,
that
means we could register them both in the same SLD. (we checked this in Technical system area).
How could we do this? It makes us crazy........
Thanks very much
RayDear Stefan,
Thanks so much for your anwser.
But the dilemma is in one SLD we achieved this, but it is only for one case and we could
not apply this for other systems.
This is the snapshot in our SLD for techical system:
Name Host Version Last Update
D01 on eisdq01 eisdq01 700 2010/12/06 12:45
D01 on eisdv01 eisdv01 640 2010/12/06 11:40
We don't know if this is the illusion that SLD could do this? But for other systems, e.g two Q systems
the lastest registration will overwrite the previsou one.
Thanks very much.
Welcome suggestions from very guru.
Ray -
Could not connect to tablet. (3001)
Hi
I'm in South Africa, and recently got the Playbook. While trying to set it up, at the point where it needs to do the software up date it keeps throwing up an error saying "Could not connect to tablet. (3001)".
Can anyone help me with this?
ThanksHi GrahamVB
Is your BlackBerry PlayBook connected to Wi-Fi at this point?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Could not register. asked to submit proof of purchase
I tried to register my Ipod Touch 8gb which I bought on 23rd November. But I could not register it and I am asked to submit a proof of purchase.
But I have just got an inovice which is not computerised print of it but written with a pen. I wanted to know whether it will be enough to register it or should I ask for a computer print of the invoice?This link never worked for me, on the very first page when I fill in all the details it just comes up as if my mac serial number is invalid, have no idea why is that so, but there is another request form where you go in steps (6 or so) and that worked for me.
thanks anyway -
The Fibre Channel Platform Registration Service could not register the platform with fabric
Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
Each 15 minutes, eventlog register a warning.
EventID: 2 Source:2
The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
I have teste the service. And it's started. Cluster storage validation report without failure.
Someone suggest any idea.
Thanks.Hi,
What’s the OS version of your cluster node?
The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
through one or more high-efficiency data paths. This service is used in support of storage area networks.
This service is installed by default on Windows Server 2008, and the service startup type is Manual.
You may try hotfix in KB 978790, and check the result.
For more information please refer to following MS articles:
The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
http://support.microsoft.com/kb/978790
cluster resources unresponsive
http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support -
Web server error: Could not register a HeartbeatMonitor
Hi:
When I use weblogic thin client (wljmsclient) and createTopicConnection()
causes weblogic server exception below.
Seems it depends on where my client runs. Not sure if it is related to
network configuration for different subnet.
Thanks in advance for your help. (weblogic server 8.1.1 or 8.1.2, IIOP protocol
for client connection)
Here is the exception:
weblogic.jms.dispatcher.DispatcherException: Could not register a HeartbeatMonit
orListener for [weblogic.iiop.IIOPRemoteRef@8b4c94fa] for weblogic.jms.C:HP01:4t
:-38
at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(Di
spatcherWrapperState.java:569)
at weblogic.jms.dispatcher.DispatcherManager.dispatcherAdd(DispatcherMan
ager.java:106)
at weblogic.jms.dispatcher.DispatcherManager.addDispatcherReference(Disp
atcherManager.java:196)
at weblogic.jms.frontend.FEConnectionFactory.connectionCreateInternal(FE
ConnectionFactory.java:413)
at weblogic.jms.frontend.FEConnectionFactory.connectionCreateRequest(FEC
onnectionFactory.java:385)
at weblogic.jms.frontend.FEConnectionFactory_WLSkel.invoke(Unknown Sourc
e)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerR
ef.java:108)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:353)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
144)
Tony
Hi Tony,
I wonder if there was a regression between 8.1.1 and 8.1.2? Anyhow,
since the weblogic.jar works on the client, and since you verified
your classpaths, it seems quite likely the problem is in WebLogic.
I recommend two things:
(1) ensure that you are using a supported version of the JVM
(2) filing a support case and using weblogic.jar
as a temporary work-around while the problem gets fixed
Sorry I couldn't help you more.
Tom
tony wrote:
> Tom:
>
> Thanks.
> See my answer below:
>
>
> Tom Barnes <[email protected].bea.com>
> wrote:
>
>>Hi Tony,
>>
>>Some questions/thoughts:
>>
>>Is that the full stack trace?
>
>
> There are few more lines: (paste from weblogic server log)
>
> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
> 144)
> at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
> :404)
> at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
> java:30)
> at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
> aused by: weblogic.rmi.extensions.server.HeartbeatMonitorUnavailableException:
> ould not register a HeartbeatMonitorListener for [weblogic.iiop.IIOPRemoteRef@a8
> 2e47e4]
> at weblogic.rmi.extensions.server.HeartbeatMonitor.addHeartbeatMonitorLi
> tener(HeartbeatMonitor.java:86)
> at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(Di
> patcherWrapperState.java:559)
> ... 14 more
>
>
>
>
>>Did you use 8.1.2 jars for BOTH the client and the server?
>
>
> yes
>
>
>>Check that the server has no thin client jar in
>>its classpath and that the client has no weblogic.jar in
>>its classpath?
>
> Double checked.
> Actually if client uses weblogic.jar, instead of wljmsclient and wlclient (thin
> client), it works, and no this exception.
>
> Tony
>
>>Tom
>>
>>Tony wrote:
>>
>>>Hi:
>>>
>>> When I use weblogic thin client (wljmsclient) and createTopicConnection()
>>>causes weblogic server exception below.
>>> Seems it depends on where my client runs. Not sure if it is
>>
>>related to
>>
>>>network configuration for different subnet.
>>> Thanks in advance for your help. (weblogic server 8.1.1 or 8.1.2,
>>
>>IIOP protocol
>>
>>>for client connection)
>>>
>>> Here is the exception:
>>>
>>>weblogic.jms.dispatcher.DispatcherException: Could not register a HeartbeatMonit
>>>
>>>orListener for [weblogic.iiop.IIOPRemoteRef@8b4c94fa] for weblogic.jms.C:HP01:4t
>>>
>>>:-38
>>>
>>> at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(Di
>>>
>>>spatcherWrapperState.java:569)
>>>
>>> at weblogic.jms.dispatcher.DispatcherManager.dispatcherAdd(DispatcherMan
>>>
>>>ager.java:106)
>>>
>>> at weblogic.jms.dispatcher.DispatcherManager.addDispatcherReference(Disp
>>>
>>>atcherManager.java:196)
>>>
>>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateInternal(FE
>>>
>>>ConnectionFactory.java:413)
>>>
>>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateRequest(FEC
>>>
>>>onnectionFactory.java:385)
>>>
>>> at weblogic.jms.frontend.FEConnectionFactory_WLSkel.invoke(Unknown
>>
>>Sourc
>>
>>>e)
>>>
>>> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
>>>
>>> at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerR
>>>
>>>ef.java:108)
>>>
>>> at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
>>>
>>> at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
>>>
>>>dSubject.java:353)
>>>
>>> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
>>>
>>>144)
>>>
>>>
>>>
>>>Tony
>>>
>>>
>>
>
-
Windows 2k Clients could not registered with CSAMC 5.0
hi there,
My w2k clients could not registered with CSAMC, WinXP registered o.k. I am running CSA 5.0.176.
All clients in same TESTMODE group. Any idea ?
Thanks
adeThe CSAgent-Install.log will show you if any of the shims failed to load during the install.
The csalog.txt in the same directory will log communication problems. Look for an error code like one below (cut and pasted from the Networkers 2006 CSA Troubleshooting session slides):
OKENA_STATUS_LICENSE_REACHED_LIMIT = 2030
Number of registered hosts has exceeded the license count for that host type [desktop or server]
Resolution: delete unused hosts; automatically in 30 days or use search
OKENA_STATUS_REGISTRATION_NOT_ALLOWED = 2031
Usually a certificate issue
Resolution: Set agent to debug and triage using csalog.txt
OKENA_STATUS_INVALID_LICENSE = 2035
A license has expired or file format was not valid
Resolution: Delete expired license files
OKENA_STATUS_REGISTRATION_BACKOFF =2037
A number of conditions can trigger this; all are uncommon and need attention
Resolution: Set agent to debug and triage using csalog.txt -
Error when deleting file: Could not find this item. This is no longer located in ...
We are setting up a new Windows 2012 server. Users access this server using a 'terminal services'. We have mapped some folders from a legacy server (different domain). Using group policy preferences, we map this folder as a drive for a user.
When user wants to delete some files, he get's the error: 'Could not find this item ..' The error is displayed to the user and it looks like the file can't be deleted. But when I press the F5 (refresh) button, the file is gone. My problem is very similar
to a problem in the following post: http://social.technet.microsoft.com/Forums/windowsserver/en-US/042e747a-0e25-4190-b0a2-82f3e9635eb0/can-not-delete-file-error-is-could-not-find-this-item?forum=w7itprogeneral
When I create 'txt' (or 'pdf', 'zip') file, i can delete it without the error. When I create 'xlsx', 'docx', 'pptx', 'bmp', 'jpg', I get the error.
Does somebody have an idea, how can I fix the cause of this problem? (I can't tell to users to hit the F5 button everytime when they face this issue)
Thank you for your help in advance!
JurajHi,
Please check if the problematic files’ filename ended with a dot. If so, you could refer to the article below to troubleshoot the issue:
Solved: “Cannot read from the source file or disk”
http://blog.dotsmart.net/2008/06/12/solved-cannot-read-from-the-source-file-or-disk/
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
sir i entered my icloud id when i want to activate my iphone..
i am **** sure that id i am entering in iphone is correct..
still iphone says this id could not activate this iphone...
i disable find my iphone and deleted icloud from iphone before restoring it.
so according to terms and conditions iphone can not ask me for apple id to activate ..
please reply soon..
this problem is making me mad.. i cant do my work without iphone.. contact asap...Sometimes it happens when phone is not connected to Internet. If it is not - try connect to itunes on the computer and activate again. If it is - good luck and advice to reset password.
-
I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?This is a duplicate thread - see here
-
On a new setup I get error message "'could not activate this table (3001)''
Hi,
I am busy setting up my new playbook and get an error message on the software update screen: "'could not activate this table (3001)'' please try changing your settings.
What settings am I meant to change?
There is a button for settings and when I press this, the playbook takes me back to the connect to WI-FI screen. The WI-FI screen shows that I am currently connected. When I click on hotspot setup, the screen comes back and says I am already connected to the internet.
Can anybody please assist me to complete my setup so that I can start using the playbook?
Looking forward to your feedback
Thanks a staxOr, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />
Maybe you are looking for
-
Text Box in DOCUMENTS Tab when creating a Contract
Hi I'm using SRM 5 , when creating a Contract(GOA), the minute you select the Documents Tab , the text box for internal note is already open, and it fills up the top portion of the screen. This does not allow you to save( or to put your contract eith
-
Xml publisher pdf layout in ebs is incorrect
Hi, I am doing a pdf report for a pre-printed layout. My layout has to be exact for all pages. i have a grouping on top of my layout.. when runing it in ebs the first page on top has less space , and the other pages has more space on top of the page.
-
Hello all, our client requests validation during F110 proposal. this validation should check the Payment Method Supplement (BSEG-UZAWE) in the invoice and verify that it complies with the paying house bank (HBKID) or the GL account (BSEG-HKONT). For
-
Why does my document when downloaded from my computer to pages change appearance?
I have created a 8 page document in word on my computer, when it uploads to my ipad, it changes its appearance. How can I keep that from happening?
-
I placed an order for the digital download of Hohokum. I received my email but when I went to download it the code was for Killzone Shadow Fall. What do I need to do to get this fixed? More than a little bummed.