Could not release PO or Delete wrong item

Hi Experts,
Pls help me regarding the followings problem :
we create wrong PO including one item with quantity 0 and try to delete the wrong item and also trying to release PO but receive runtime error "BCD_ZERODIVIDE":
"Division by 0 (type P) in program "/1BCDWB/SAPLSF00000013"
Error in the ABAP Application Program
The current ABAP program "/1BCDWB/SAPLSF00000013" had to be terminated because
it has come across a statement that unfortunately cannot be executed.
It would be my pleasure if you help me to solve it,
Best Regards
Azam

Take the help of an Abaper. Check the link below....
http://help.sap.com/saphelp_nw70/helpdata/en/cf/f2bbce142c11d3b93a0000e8353423/content.htm
Regards,
Divraj

Similar Messages

The photo "IMG_5310.JPG" could not be opened, because the original item cannot be found.

Each time I open iPhoto or plug in a device and iPhoto automatically opens, the following message appears five times, looking for photos I assume I deleted, perhaps the wrong way.
The photo “IMG_5310.JPG” could not be opened, because the original item cannot be found.
I've searched the computer for the images, but they seem to be permanently deleted. How do I "reset" iPhoto from looking for these photos and remove this "Alert"?
Sincerely,
Mark T

mark, you are asking about iPhoto on your Mac, right? This is the iPhoto on IOS devices forum - iPads, iPhones, etc. Next time please post your question in the iLIfe iPhoto forum; you will get more help there.
But to your question. This error message usually occurs, when original image files are missing from your iPhoto library. iPhoto keeps the original images and the edited versions, and when the originals are removed from the iPhoto Library by deleting them from the Finder, then the photos can no longer be edited, exported, printed.
Does iPhoot open correctly, after the alert appears? Can you work with it, after the alert finishes? Then delete the corresponding edited versions of the missing originals from your iPhoto library. The versions probably will be marked by an exclamation point, when you browse your photos.
To prevent this from happening again, open the iPhoto "Preferences" > "Advaced" panel and make sure the option "Importing: Copy items to the iPhoto LIbrary" is enabled. Otherwise original files may be stored outside your iPhoto library and you can accidentally delete them and loose valuable photos.
Regards
Léonie

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

Could not release my own Key Figure from DP to SNP

Hi SAP Experts,
As requirement, I have to run forecast for three Key Figures in Demand Planning (DP): Z_FK1, Z_KFK2, Z_FK3. Unit of measure of these Keyfigure are VND (currency Viet Nam Dong).
I added these Key Figures to DP Planning Area with name Z_DPPlan01.
I created a new Planning Area in SNP with name: Z_9ASNP02 by coppying from the standard 9ASNP02. Then I added the above Key Figures (Z_FK1, Z_KFK2, Z_FK3) into Z_9ASNP02 planning area.
After I runing forecast in DP, I tried to release value of three Key Figures into SNP with tcode: /n/sapapo/mc90. Although system informs that u201CRelease successfully executedu201D, nothing released from Z_DPPlan01 to Z_9ASNP02 when I check in SNP Planning book.
Question is:
How to configure Key Figures in SNP and DP (Sematic, Key Figure Function, Category, Category Groupu2026) so that we can release all three above Key Figures from DP to SNP?
Thanks very much for your help!
Duyennx

Dear Pawan,
2 . The business requirements are:
Our customer is a bank that has many branches. They want to forecast for each branches:
- The Total money (all denominations) will be issued in next quater (Z_KF1). This base on historical data (Z_HIS1)
- The total money (all denominations)will be received in next quater (Z_KF2). This base on historical data (Z_HIS2)
Base on these forecast KFs, we need to calculate the Average of Total money will be received and Issued in next quarter (Z_KF3 = (Z_KF1+ZKF2)/90.
90 is the number of days in a Quarter.
We need to release the three KFs from DP to SNP for further calculation and reporting. As said previously, I added three time series KFs Z_KF1, Z_KF2, Z_KF3 to SNP Planning Area (Z_9ASNP02)
If could not release, we can coppy. But the problem is that: in DP, beside standard characteristics 9AMATNR and 9ALOCNO, we also added more custom characteristics like Z_TYPE (to generate CVCs and to drill down money by type (cotton, polymer, coin)). So when I run the Tcode /n/sapapo/tscopy, despite of the fact that in u201CCharacteristic Assignmentu201D I only assigned 9AMATNR and 9ALOCNO from source to target, system show message like:
3 combinations not contained in target master planning object structure
Message no. /SAPAPO/MSDP_REL108
Diagnosis
Characteristic combinations exist in the source planning area's master planning object structure that are not contained within the master planning object structure of the target planning area.
System Response
The source data of these characteristic combinations is not written to to the target planning area.
So, How to copy with my case?
4.Please Explain more about:
u201CCreate a third custom category group containing your custom category, and add this under 9AMALO. Give only your category group name & Semantic should be 000u201D
4.1.I can creat a custom category group under menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Supply Chain Planning u2192 Supply Network Planning
u2192 Basic Settings u2192 Maintain Category Groups.
But where can I create my custome category? Is this menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Global Available-to-promise (Global ATP) u2192 General Settings u2192 Maintain Category
In this path, I can see to folder:
-u201CSAP categoriesu201D: We could not create new category in this folder
- and u201Cnon-SAP Categoriesu201D: I can press button u201CNew Entriesu201D and key in Data like:
oCategory: TT
oCategory text: TT
oCategory Description: TT
oSort String: 99
oCategory type: Requirements (I also tried with Forecast, Stock, Receipt)
And then, press u201CSaveu201D button. But system always create message:
u201CEnter values in work area for non-key fields
Message no. SV174
Diagnosis
An entry has been made for a non-key field in the view or table, which does not satisfy a selection condition stored in the Dictionary or made in the maintenance transaction initial screen.
System Response
The values entered cannot be accepted.
Procedure
Ensure that your entry is correct. This data record will not be displayed if you use the same selection conditions again.u201D
I donu2019t know what wrong here. How to create my custom Category? Here is u201Cnon-SAP Categoriesu201D, Is there any problem if we create category with this type?
4.2 How to add custom Category Group under 9AMALO? Which T-code we use?
5. By the way, Please clearly explain for me:
5.1. What are differences between u201CTime series live cacheu201D and u201COrder live cacheu201D?
5.2. What are differences between releasing KFs from DP to SNP and copying KFs from DP to SNP?
Thanks very much for your help!
Edited by: xuanduyen on Dec 31, 2011 4:38 AM

Photo could not be opened, because the original item cannot be found

I've drawn a blank. This error message gets touched on in places, but I cannot find a direct answer.
I have never used iPhoto.
After installing and without changing any settings, I got to import folder.
I select my photos folder and begin to import all my photos.
Every single photo of the 3500+ pops up the error:
"The photo "xxx.jpg" could not be opened, because the original item cannot be found"
And I have to press Cancel (and then it imports it anyway) for each of the 3500+ photos.
What is going on?
I need to employ a chimp to press Cancel thousands of times...
I have not imported, deleted, moved or done anything. Apart from install iPhoto and then IMPORT.
TIA

Welcome to the Apple Discussions.
Try this
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

The photo "IMG_0005.JPG" could not be opened, because the original item can

OK so I got back from Hawaii and wanted to import some pics. I had an unfortunate accident and had to buy a new camera. So now I had two cards both with some of the same image numbers. After I wanted to redo the import so I deleted the original pics and the folders in iPhoto and put them back onto the hard drive in separate folders. Now I get the message
"The photo “IMG_0005.JPG” could not be opened, because the original item cannot be found."
Now I have 1019 boxes that it wants me to cancel what do I do. Help

OK so I got back from Hawaii and wanted to import some pics. I had an unfortunate accident and had to buy a new camera. So now I had two cards both with some of the same image numbers. After I wanted to redo the import so I deleted the original pics and the folders in iPhoto and put them back onto the hard drive in separate folders. Now I get the message
"The photo “IMG_0005.JPG” could not be opened, because the original item cannot be found."
Now I have 1019 boxes that it wants me to cancel what do I do. Help
how did you do these delations? in the iPhoto window or using the finder
do you have a referenced library ( (The iPhoto advanced preference to "copy imported items to the iPhoto library" has been unchecked) which is strongly NOT recommended. ) or a managed library (that option is in its default checked state)
LN

HT5129 The photo "claire-66.jpg" could not be opened, because the original item cannot be found.

because of the mobile me switch i can not use my iphoto. i had some albums in my mobile me web gallery and one of them i had deleted the original files so it will not allow me to use my iphoto because it keeps giving me this error message and i can't get rid of it.
"The photo “claire-66.jpg” could not be opened, because the original item cannot be found."
I don't have the original photo anymore so i can not link it to it.

So, your iPhoto Library is now corrupted.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

ReleaseRequest failed with error code 0x80004005 \ Task Sequence Manager could not release active TS request. code 80004005

Hi All,
I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
If anyone could assist with this is would be much appreciated.
Many thanks
Logs below:
<![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
<![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
<![LOG[Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
DateTime = "20141218122103.273000+000";
PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1752;
]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
<![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
<![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
<![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
<![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
<![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
<![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
<![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
<![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
<![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
<![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80 CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
thread="1752" file="libsmsmessaging.cpp:8422">
<![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
<![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
<![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
<![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
<![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
file="tsmanagerutils.cpp:118">
<![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
file="tsmanagerutils.cpp:165">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
<![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
<![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">

4005 can mean a few things, Some common can be The wrong BIOS time, or a a bad Hard drive. look at those two first.

I have the iPhone 4, and yesterday I synced my photos onto iTunes, but now I have albums on my phone that cannot be deleted, and there is not an option to delete the items in the albums individually... How do I get rid of these unwanted albums? Windows 7

I have the iPhone 4, and yesterday I synced my photos onto iTunes, but now I have albums on my phone that cannot be deleted, and there is not an option to delete the items in the albums individually... How do I get rid of these unwanted albums? Using Windows 7.

If you used iTunes to get the photos on the phone, then use the same iTunes and uncheck the music you don't want and do another sync.

What is the source of this Crawl Error `The item could not be indexed successfully because the item failed in the indexing subsystem`

Once in a while my full-crawl fails and stops working properly. The crawllogs show this error for all items crawled.
The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[7570]: (Previous generation
(last=GID[7569], curr=GID[7570]) is still active. Cannot open GID[7570]); Aborting insert of item in Link Database because it was not inserted to the Search Index.; ; SearchID = F201681E-AF1B-45D2-BFFD-6A2582D10C19 )
The full crawls starts out ok, after a while (1.5 hours into the process, 50% of all the data) suddenly no more items can be added to the index.
The index seems to be stuck. The index files on disk are no longer updated (Located in D:\Microsoft
Office Servers\15.0\Data\Office Server\Applications\Search\Nodes\BAADC4\IndexComponent3\storage\data\SP4d91e6081ac3.3.I.0.0\ms\%default) The Index and Admin component start to report these error in the ULS logs:
NodeRunnerIndex: Journal[SP4d91e6081ac3]:
Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
NodeRunnerIndex: Remote
service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated
with exception: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
NodeRummerAdmin: RetryableInvocation[SP4d91e6081ac3]:
Exception invoking index cell I.0.0. Retrying in 16 seconds: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
Looks to me the index has troubles updating/merging 'generations'. But the exact working of the indexer is not documented (as far is I know). Let alone how to fix this.
Other (maybe related) observations
Just before the errors start the NodeRunnerIndex starts a 'checkpoint': Journal[SP4d91e6081ac3]:
Starting checkpoint because forceCheckpoint is true.which ends a few moments later with Journal[SP4d91e6081ac3]:
All journal users have completed checkpoint Checkpoint[7560-7569].
Also just before the errors start to appear a TimerJob starts: Name=Timer
Job job-application-server-admin-service. This timerjobs does some strange things to the search topology: Synchronizing
Search Topology for application 'Search Service Application' with active topology [...] and Activating
components. Previous topology: --- New Topology: TopologyId: [...] followed by Starting
to execute Index RedistributeData method.
And right after these two evente the errors start to occur. (each row is a ULS log enrty)
INFO : fsplugin: IndexComponent3-bd83a8aa-923b-4526-97e8-47eac0986ff7-SP4d91e6081ac3.I.0.0 (4236): Prepare generation: 324 documents
IndexRouter[SP4d91e6081ac3]: Caught exception when preparing generation GID[7570]: (External component has thrown an exception.): System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
GenerationDispatcher[SP4d91e6081ac3]: Failed to prepare GID[7570] in 453 ms, failed on cells: [I.0.0], stale services: []
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
Remote service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated with exception: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
RetryableInvocation[SP4d91e6081ac3]: Exception invoking index cell I.0.0. Retrying in 2 seconds: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
The Question What is causing this? And how to prevent it? It happend twice in two weeks
nows. Out of the blue, no config change has been made, all disks have enough space.
Known Fix This resolves the problem, but doesn's address the root-cause of the problem!
Stop all crawls.
Wait a few minutes to let the crawl come to a complete stop.
Reset the index (clearing all!)
Start a full-crawl. In the meantime no search is available to the end user (boohoo!)

Hi,
I searched for the similar error log, the issue is finally solved by adding more drive space even though they though there is plenty space already.
https://social.technet.microsoft.com/Forums/office/en-US/d06c9b2c-0bc1-44c6-b83a-2dc0b70936c4/the-item-could-not-be-indexed-successfully-because-the-item-failed-in-the-indexing-subsystem?forum=sharepointsearch
http://community.spiceworks.com/topic/480369-the-item-could-not-be-indexed-successfully
From your decription, the issue seems to occur to your full crawl. There is one point in best practise for crawling:
Run full crawls only when it is necessary, the reasons to do a full crawl are as below:
https://technet.microsoft.com/en-us/library/jj219577.aspx#Plan_full_crawl
https://technet.microsoft.com/en-us/library/dn535606.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

No changes were made. I saw in one of the threads where someone said to repair the database(which didn't work) or Rebuild the database(which did work). Thanks to one all for the support.
WP

I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before). This time I am getting an alert that saysThe photo "IMG_5965.JPG" could not be opened, because the original item cannot be found. Help?

I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before). This time I am getting an alert that saysThe photo “IMG_5965.JPG” could not be opened, because the original item cannot be found. How can I fix this?

There is a fair likelihood of an explanation of this symptom
in another ASC discussion thread; see the reply by léonie:
https://discussions.apple.com/message/20165563#20165563
You may have to research any newer possibilities in trouble-
shooting or resolving issues by use of iPhoto Support page.
Since I don't use iPhoto as a primary editor or storage, the
details on the topic aren't so good. I prefer ToyViewer editor.
•iPhoto Support
•iPhoto Video Tutorials
Hopefully the error is easily corrected.
Good luck & happy computing!

Re: how do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

Re: how do I solve this alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found. How do I get rid of the alert so that every time I open iphoto or sync my iphone it will not come up anymore.
Thanks

The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

How do I solve this alert-The photo "evaluation.jpeg" could not be opened, because the original item cannot be found.

it happened when I did an update on the iphoto
how do I solve this
alert-The photo “evaluation.jpeg” could not be opened, because the original item cannot be found.

The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

How do i solve The photo could not be opened, because the original item cannot be found

How do i solve The photo could not be opened, because the original item cannot be found

The issue is with iPhoto. When it opens it is looking for a photo that either no longer exists or is misplaced. I would post I the iPhoto forum where those experts are.

Could not release PO or Delete wrong item

Similar Messages

Maybe you are looking for