Could not release transport of an ABAP program

Hello Expertise,
I am facing the problems bellow while trying to transport a request.
1.
Object REPT ZZSAPM07DR is inactive
Message no. EU829
Diagnosis
You tried to release a transport request, but object REPT ZZSAPM07DR is still in its inactive version.
2.
Object DYNP ZSD_CUST_SCREEN 1000 is inactive
Message no. EU829
Diagnosis
You tried to release a transport request, but object DYNP ZSD_CUST_SCREEN 1000 is still in its inactive version.
But I have checked the programs are activated and works in current client. Please help me out to solve the issues.
Thanks,
Tripod.

Hi Tripod ,
>
Tripod wrote:
> 1.
>
Object REPT ZZSAPM07DR is inactive
>
looks like some text elemets of that report are not active . REPT ZZSAPM07DR
>
Tripod wrote:
> 2.
>
Object DYNP ZSD_CUST_SCREEN 1000 is inactive
>
and the same with an inactive sceen... DYNP ZSD_CUST_SCREEN 1000
regards
rea

Similar Messages

Could not start transport control program tp while releasing the TR

Hello experts,
i have a problem if any one phase this kind of problem & if u know the solution please share to me its urgent
problem in Development system ,for this i had updated kernel , TP patch level , R3trans patch level in development and quality system , but still the problem is occurring in development system . while releasing the Transport Request this error is coming that too not in frequently some times it is happening some times it not happening ( some times its working fine )
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An
error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway
Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then
execute the command again.
please suggest me what can i do for better , how can i resolve this issue
Thanks & Regards,
Narasimha

Hello experts ,
Last one and half month on-words we are phasing some problems on STMS
while releasing the Transport Request getting this error messages on
status-bar
1. "could not start transport control program tp"
2. while importing the TR into quality system getting this error message" RFC Error :timeout during allocate/CPIC-CALL "
3.while forwarding the TR from QAS to PRD : " RFC Error :timeout during
allocate/CPIC-CALL "
after continues refreshing,we are able to release the request and importthe request into quality system. But after some time again same problem
coming
for this we did the kernel upgrade , tp , & R3trans update and STMS RE-
Configuration etc...But no use with this we got the same problem after
finishing all these workaround , but don't know what happened after 2-3
days STMS starts working fine DEV-QAS-PRD ,
Now we are in the same problem after continues refreshing,we are able torelease the request and import the request into quality system. But after
some time again same problem coming
please suggest us what could be the reason behind this & what we can do
for better

SMLT Could not start transport control program tp

Hello.
I want to install language on fresh system ERP 2005 SR2. Platform is AIX and Oracle. In SMLT i get error:
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
trace from SMGW:
Fri Sep 7 15:22:10 2007
ERROR => GwISearchPartner: timeout, partner LU: >sapdb2<, TP: >/usr/sap/TR3/DVEBMGS01/exe/tp< [gwr3cpic.c   5842]
ERROR => GwISearchPartner: HOST: sapdb2, conv ID: 58517568 [gwr3cpic.c   5855]
Fri Sep 7 15:22:12 2007
ERROR => GwIConnectHandle: conversation 58517568 not found
(lu=sapdb2 , tp=tp      , host=sapdb2) [gwxxrd.c     7762]
I have update the kernel and tp to the newest version.
Can anybody help me to solve this problem ?
Thanks.

I found problem in TCP/IP RFC connection CALLTP_AIX :
I tested it several times, and sometime it returns error:
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout bei
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host sapdb2 / sapgw01
Error Details     DETAIL: no connect of TP /usr/sap/TR3/DVEBMGS01/exe/tp from host sapdb2 after
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 192
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 5873
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Fri Sep 7 16:04:55 2007
Error Details     VERSION: 2
Also report RSTPTEST somitemes return problem in step RFC ping:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout beim Verbindungsaufbau (Partner vorhanden ?)
Message was edited by:
        Evgeniy Druzkin

Stms Error Could not start transport control program tp

Hi Experts,
We have installed new system and trying to configure STMS, but we are facing Issue like " Could not Start transport control program tp ". Can anyone please suggest us how to continue further...
Tasks we have done :
1. Upgraded kernel, tp , r3trans to latest.
2. Added Dbms_type = mss in Environmental variables
3. Reconfigured STMS by deleting old one..
Thanks in Advance...
Regards,
Krishna.M

Hi Benjamin,
We have checked for Authorizations to the dirve, we are having full authorizations also host file entries are correct, but we are unable to find the dev_tp trace file. Can you please tell me where can i find that file. For more information please find the image....
Please suggest me how to resolve the issue..
Regards,
Krishna.M

Could not start transport control program tp

Hi all
when i am trying to see the TP Parameters i am getting the below error:
System   DV2              Command TMS_MGR_READ_TPPARAM
Client   000              Service Transport Service
User     TMSADM           Start    Online
Date     10/18/2008       Function TMS_TP_READ_TPPARAM
Time     12:03:39         Message TP_CALL_FAILED
    Could not start transport control program tp
    RFC error: Error when opening an RFC connection
and in SMGW i am seeing the below error:
Sat Oct 18 11:09:33 2008
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >/usr/sap/DV2/DVEBMGS00/exe/tp< [gwr3cpic.c   6135]
ERROR => GwISearchPartner: HOST: hostname, conv ID: 60516439 [gwr3cpic.c   6148]
please help me to solve this.
Thanks:
Giridhar

Hi Giridhar,
I think its a cpic timeout occurring before reading tp could start. Please check the parameter gw/cpic_timeout in your system. The default may be 20 sec for this parameter.. You can consider it increasing to 60 sec.
https://service.sap.com/sap/support/notes/638701
Regards,
Debasis.

I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed. No other programs have similar problem. Any suggestion what can be done?

I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Could not retrieve transport type data for Receive Location

can someone lend me a help to this error, i was encountering this error for days, and i haven't found solution till now, thanks in advance!\
Could not retrieve transport type data for Receive Location 'Receive' from config store. Primary SSO Server 'server' failed. No credentials have been set for the mapping.
(Microsoft.BizTalk.ExplorerOM)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2010&ProdVer=3.9.469.0&EvtSrc=Microsoft.BizTalk.ExplorerOM.Resources&EvtID=IDS_ERR_RL_SSO_GETCONFIG

After a long time of googling finally I got the problem resolved. The steps I followed are as follows:
Go To SSO Adminnistration -> System -> Restore Secret and select the secret file.
If you dont know the path of the secret file try once in the location "C:\Program Files\Common Files\Enterprise Single Sign-On".
Select the file and provide the password. Once the master secret restores the error will not come.

ReleaseRequest failed with error code 0x80004005 \ Task Sequence Manager could not release active TS request. code 80004005

Hi All,
I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
If anyone could assist with this is would be much appreciated.
Many thanks
Logs below:
<![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
<![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
<![LOG[Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
DateTime = "20141218122103.273000+000";
PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1752;
]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
<![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
<![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
<![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
<![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
<![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
<![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
<![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
<![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
<![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
<![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80 CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
thread="1752" file="libsmsmessaging.cpp:8422">
<![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
<![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
<![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
<![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
<![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
file="tsmanagerutils.cpp:118">
<![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
file="tsmanagerutils.cpp:165">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
<![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
<![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">

4005 can mean a few things, Some common can be The wrong BIOS time, or a a bad Hard drive. look at those two first.

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

Hi Daniel,
For any sort of payment related matter, kindly contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If you are still not able to chat, Kindly reply with the below mentioned information.
OS version:
Browser Version:
You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

Could not release my own Key Figure from DP to SNP

Hi SAP Experts,
As requirement, I have to run forecast for three Key Figures in Demand Planning (DP): Z_FK1, Z_KFK2, Z_FK3. Unit of measure of these Keyfigure are VND (currency Viet Nam Dong).
I added these Key Figures to DP Planning Area with name Z_DPPlan01.
I created a new Planning Area in SNP with name: Z_9ASNP02 by coppying from the standard 9ASNP02. Then I added the above Key Figures (Z_FK1, Z_KFK2, Z_FK3) into Z_9ASNP02 planning area.
After I runing forecast in DP, I tried to release value of three Key Figures into SNP with tcode: /n/sapapo/mc90. Although system informs that u201CRelease successfully executedu201D, nothing released from Z_DPPlan01 to Z_9ASNP02 when I check in SNP Planning book.
Question is:
How to configure Key Figures in SNP and DP (Sematic, Key Figure Function, Category, Category Groupu2026) so that we can release all three above Key Figures from DP to SNP?
Thanks very much for your help!
Duyennx

Dear Pawan,
2 . The business requirements are:
Our customer is a bank that has many branches. They want to forecast for each branches:
- The Total money (all denominations) will be issued in next quater (Z_KF1). This base on historical data (Z_HIS1)
- The total money (all denominations)will be received in next quater (Z_KF2). This base on historical data (Z_HIS2)
Base on these forecast KFs, we need to calculate the Average of Total money will be received and Issued in next quarter (Z_KF3 = (Z_KF1+ZKF2)/90.
90 is the number of days in a Quarter.
We need to release the three KFs from DP to SNP for further calculation and reporting. As said previously, I added three time series KFs Z_KF1, Z_KF2, Z_KF3 to SNP Planning Area (Z_9ASNP02)
If could not release, we can coppy. But the problem is that: in DP, beside standard characteristics 9AMATNR and 9ALOCNO, we also added more custom characteristics like Z_TYPE (to generate CVCs and to drill down money by type (cotton, polymer, coin)). So when I run the Tcode /n/sapapo/tscopy, despite of the fact that in u201CCharacteristic Assignmentu201D I only assigned 9AMATNR and 9ALOCNO from source to target, system show message like:
3 combinations not contained in target master planning object structure
Message no. /SAPAPO/MSDP_REL108
Diagnosis
Characteristic combinations exist in the source planning area's master planning object structure that are not contained within the master planning object structure of the target planning area.
System Response
The source data of these characteristic combinations is not written to to the target planning area.
So, How to copy with my case?
4.Please Explain more about:
u201CCreate a third custom category group containing your custom category, and add this under 9AMALO. Give only your category group name & Semantic should be 000u201D
4.1.I can creat a custom category group under menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Supply Chain Planning u2192 Supply Network Planning
u2192 Basic Settings u2192 Maintain Category Groups.
But where can I create my custome category? Is this menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Global Available-to-promise (Global ATP) u2192 General Settings u2192 Maintain Category
In this path, I can see to folder:
-u201CSAP categoriesu201D: We could not create new category in this folder
- and u201Cnon-SAP Categoriesu201D: I can press button u201CNew Entriesu201D and key in Data like:
oCategory: TT
oCategory text: TT
oCategory Description: TT
oSort String: 99
oCategory type: Requirements (I also tried with Forecast, Stock, Receipt)
And then, press u201CSaveu201D button. But system always create message:
u201CEnter values in work area for non-key fields
Message no. SV174
Diagnosis
An entry has been made for a non-key field in the view or table, which does not satisfy a selection condition stored in the Dictionary or made in the maintenance transaction initial screen.
System Response
The values entered cannot be accepted.
Procedure
Ensure that your entry is correct. This data record will not be displayed if you use the same selection conditions again.u201D
I donu2019t know what wrong here. How to create my custom Category? Here is u201Cnon-SAP Categoriesu201D, Is there any problem if we create category with this type?
4.2 How to add custom Category Group under 9AMALO? Which T-code we use?
5. By the way, Please clearly explain for me:
5.1. What are differences between u201CTime series live cacheu201D and u201COrder live cacheu201D?
5.2. What are differences between releasing KFs from DP to SNP and copying KFs from DP to SNP?
Thanks very much for your help!
Edited by: xuanduyen on Dec 31, 2011 4:38 AM

Could not find the main class : HelloWorldApp program will exit

please help me
i downloaded and installed jdk-6u13-windows-i586-p(1) from sun.java.com
in my computer --> Advanced --> environment variables --> i had set
user variable :
variable value
java_home C:\Program Files\Java\jdk1.6.0_13\bin
System variable:
path : C:\Program Files\Java\jdk1.6.0_13\bin
after that i wrote a program
* The HelloWorldApp class implements an application that
* simply prints "Hello World!" to standard output.
class HelloWorldApp {
public static void main(String[] args) {
System.out.println("Hello World!"); // Display the string.
i saved in c:\ mywork
i compiled it with
javac HelloWorldApp.java and then
java HelloWorldApp
output / result also came
but iam unable to create jar file . when it is created it is showing
could not find the main class : HelloWorldApp program will exit
i created jar file by following way
i created
manifest.txt
Min-Class : HelloWorldApp and then
start -->run--> cmd-->
c:\mywork> jar cfm test.jar manifest.txt HelloWorldApp.class
c:\ java -jar test.jar
but it displays a message
" could not find the main class : HelloWorldApp program will exit "
please please please help me please 1000's of please help me

Peter__Lawrey wrote:
You have to specify the manifest with a special option (I think its was -M)
Otherwise the jar will create one (even if you provide it)No, the text file passed as a parameter will be incorporated in the manifest file generated by the JAR tool.
@OP: This will work:
JarTest.java
public class JarTest {
public static void main(String[] args) {
System.out.println("JarTest works!");
}manifest.txt
Main-Class: JarTest+(note there is an extra new line in the manifest.txt!)+
Now execute these commands:
javac JarTest.java
jar cfm MyJar.jar manifest.txt JarTest.class
java -jar MyJar.jar And on my machine, the string "JarTest works!" is displayed on the screen.
And if you look in the MANIFEST.MF file inside your jar file (you can use almost any zip-utility for this), you will see the following:
Manifest-Version: 1.0
Created-By: 1.6.0_0 (Sun Microsystems Inc.)
Main-Class: JarTestOr something similar.

Could not find the main class. Program will exit!

I have created many Executable Jar files before, and this one I did the same. When I run the jar file, (Clicking on it) I get the "Could not find the main class. Program will exit!" error message. When I run the jar file through DOS I get this Stack trace:
Exception in thread "main" java.lang.NoClassDefFoundError: javax/media/ControllerListener
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:509)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:246)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:322)
Any Ideas? I did a search on google, and looks like others have had this problem but found no answer.
US101

There could be several reasons for getting this "Could not find main class" error message. From your stack trace it looks like the class javax/media/ControllerListener is not in your class path. Make sure your manifest file has a line like this:
Class-Path: pathToTheJarFileWithControllerListenerClass.jar otherJars.jar
This error message is also generated whenever any static initialization errors out giving the misleading error message implying that there is something wrong with the main class. Prior to starting your main class, static initialization of any static variables takes place. In my case, I was initializing a resource bundle, and forgot to include the property file in my building of the jar file. Well this failed of course and the generic error message appeared. It took many long hours to figure out it didn't have anything to do with the manifest file or the main class itself.
HTH,
John Bender

Executable Jar: Could not find the main class. Program will exit.

I have a jar which contins the class Main.class.
Following details are specified in the Manifest file.
Manifest-Version: 1.0
Main-Class: Main
However, when I double click the jar file, I get the error...
Could not find the main class. Program will exit.
What could be wrong?
Thanks in advance
Sachin

hi,
i've got exactly the same problem: double clicking the archive ends with an error (can't find the main class) but working with the command line executes the file!??!
does anyone know a solution?
thanks

Could not initialize Photoshop because of a program error" with PS CC 2014

I get "Could not initialize Photoshop because of a program error" with PS CC 2014 on a 2099 Macbook Pro running Mavericks. Then the program closes. Can anyone help?

Could be corrupt preferences, a problem with the OS font cache, or some other problem with the OS.
First, try resetting the preferences.

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem

What is the problem in my account I could not download from the store, whether programs are free or non-free I hope you fix the problem or Chrho me and I repaired the problem
thank you...

Nobody here can fix your problem, we do not work for Apple. And I have no idea what "Chrho" means. Neither does Google.
So - exactly what happens when you try to download a program? And from where are you trying to download it?

Could not release transport of an ABAP program

Similar Messages

Maybe you are looking for