Could not remove files FlashUtil9c.exe and Flash9c.ocx
Hello everybody!
I have a problem. I found that NTFS permissions don't allow
me to remove files
C:\WINDOWS\System32\Macromed\Flash\FlashUtil9c.exe and
C:\WINDOWS\System32\Macromed\Flash\Flash9c.ocx while I still having
administrator status under my WinXP SP2 Prof. Of course, I was
frighten and though that it is a virus. I removed these files
manually and found, that my Flash Player doesn't work. I downloaded
it again and installed. Now I see that these files are again at
their place and have the same permissions. Is it a virus or just a
bug? Or is it so necessary for Flash Player to keep these files
locked?
Please, don't answer so that is a special uninstall util for
FP - I know that. Isn't it a virus, that's a question.
Check this out... Follow the instructions as I did from
Darren McNally - Adobe ... No more nagging Flash9c.ocx ... It
works...
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1262196&enterthread=y#4557641
Similar Messages
-
Could not connect to TSAutoMgr.exe and error 17501
Hi,
I'm running TS3.5 on Win 2000 system.
I'm experiencing the above error (also see attached screen shots in pdf file).
The error message is talking about DCOM configuration.
I verified that I have the TSAutomgr.exe file.
I execute the utility dcomcnfg.exe but I can't find the TSAutomgr.exe there....
where exactly TSAutoMgr.exe should be listed?
What does it mean if it's not there?
And advice what to do next?
Thanks
Rafi
Attachments:
TSAutoMgr problem.pdf 183 KBHi Rafi2003,
This error occurs when the TestStand CVI adapter
fails to connect to the TestStand AutoMgr COM server. Usually this is caused by a problem with the DCOM permissions associated with this
server. I would follow the steps in this document first. This should take care if it for you. If not, I would look under the security tab of the NI TestStand AutoMgr Properties box. Here I would like you to verify that you have Local Launch, Local
Activation and Local Access permissions. If the Use Default radio
button is checked, then you'll need to verify that the default
permissions for the computer are set appropriately. Finally, even if
permissions are granted specifically by the server settings, you still
need to verify that the computer doesn't set limits on applications
that set their own permissions. You can edit the computer-wide defaults
and limits on the COM Security page of the Properties dialog of My
Computer in the Component Services tool.
Cheers,
Kelly R.
Applications Engineer
National Instruments -
Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.
That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.
-
I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error ccurred during installation and I could not remove the program. Now what?
I tried removing the QuickTime program, but a window appeared telling me that a fatal error ccurred during installation and I could not remove the program.
I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). When I check the file it shows Zero KB downloaded but the file appears - any suggestions?
Obviously your download was not successful.
What is your operating system? How exactly do you download such files? -
Long time ago I trialed elements 9 and could not remove from Programs; still can't
Long time ago I trialed Elements 9 and could not remove from Programs at the time; still can't?
I didn't go forward with '9' because of its size and it didn't appear to provide advantages for the cost.
How do I uninstall it when conventional methods fail. Message received in Windows Installer is, ' The feature you are trying to use is on a network resource that is unavailable.' Elements 9 cannot be used." When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod. -
ASPNETCOMPILER error ASPCONFIG Could not load file or assembly Oracle.Data
I have migrated my .Net solution from 3.5 to 4.0 which consist of a class library and a web service. Web serivice is dependent on class library and the class library uses oracle.dataaccess.dll version 4.112.3.0. I have installed ODAC 11.2.0 in my machine.
When I try to build the solution using MSBUILD.EXE I am getting the below error on my build machine.
ASPNETCOMPILER : error ASPCONFIG: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. An attempt was made to load a program with an incorrect format. [D:\VEROS_BuildFolder\CDDS_MERGE_CODEDROP_.NETUPGRADE\WEB Services\AppraisalSubmission\AppraisalSubmissionService.metaproj]
And I try to build from VS2010, it is building successfully.
But we need to build only using MSBUILD.EXE which resides in "C:\Windows\Microsoft.NET\Framework\v4.0.30319" path. While building using MSBUILd.EXE the Oracle.DataAccess.dll is getting copied into the BIN folder of the web service. It should reference from GAC location. My build serveer is 64 bit win2008 server. when I checked the dll version install using GACUTIL , I got the below result
C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 Tools>gacutil /l oracle.dataaccess
The Global Assembly Cache contains the following assemblies:
oracle.dataaccess, Version=2.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=AMD64
oracle.dataaccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=AMD64
oracle.dataaccess, Version=4.112.3.0, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Previous the application was building successfully using framework 3.5 and Oracle.DataAccess.dll version 2.112.3.0.
Please help to build my applicaiton using MSBUILD 4.0 version.Typically, when you get the "load a program with an incorrect format" exception, it's a mismatch in the bit-ness of the Oracle client you're using and the project you're building. By default, .net builds in AnyCPU mode. That means if you do it on a 64 bit system, you'll get a 64 bit (x64) program. That doesn't work with a 32 bit Oracle client. Usually, you'll need to force MSBUILD to build a 32 bit (x86) result. That will use the 32 bit Oracle client successfully. There's probably a command line switch for that. When building in Visual Studio, you can do it from the Build > Configuration Manager menu.
Now in this case it looks like you actually have both 32 and 64 bit versions of Oracle.DataAccess in the GAC, so I'm not sure if you have both Oracle clients or not. If you have one in the \bin with Copy Local = True, you could be getting the wrong one. You'll want to set Copy Local = False on the properties of the reference and remove that file from the \bin. -
I am getting the infamous "Could not load file or assembly Microsoft.SqlServer.management.sdk.sfc version 11.0.0.0." The set up of my system is Visual Studio 2013 Ultimate update 4 and my SQL server is 12.0.2000 Express. I am also using SQL
management studio 2014. I read other comments and blogs, and reinstalled the SQL Express 12.0.2000, but no luck yet.Hi payam49er,
>>I am
getting the infamous "Could not load file or assembly Microsoft.SqlServer.management.sdk.
sfc version 11.0.0.0."
Based on your error, could you please tell me what you do operation and then you get the error message?
Could you please tell me if you add a data connection from Server Explorer Window in Visual studio 2013 Ultimate update
4 and then you get the error message?
If yes, to check if the issue is related to the VS IDE issue, I suggest you can execute the following commands to check if it can
help you add data connection in VS2013 Ultimate Update 4.
(1)I suggest you can run your VS in safe mode by executing Devenv.exe /SafeMode to add a data connect again.
(2)I suggest you can use the Devenv.exe /ResetSettings to restores the IDE's default settings, optionally resets to the specified
VSSettings file.
(3)You can execute the Devenv.exe /ResetAddin to remove commands and command UI associated with the specified Add-in.
In addition, if you used the SQL Server Express to connect the data in VS, you need to specify the server name
as MyComputerName\SQLEXPRESS. If you used the SQL Server to connect the data in VS. Please you try to specify the server name as MyComputerName\InstanceName here to check the result.
If still no help, according the error, it indicates that the problem is that the system cannot locate the right assembly (SQL
Server SDK). So I think you may get better response and solutions if you consult on SQL Server forums.
Thank you for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Could not load file or assembly 'Microsoft.SqlServer.Management.Sdk.Sfc, Version=11.0.0.0
Hi,
I currently installed VS 2012 Ultimate Edition, Visual Web Developer 2012 Express Edition and MS Sql server 2008 R2.
When i go to add a data connection (sql server 2008 r2) in Visual studio 2012.
The steps followed were:
1. Open Server Explorer.
2. right click on Data Connections
3. Click on Add Connection
4. In Choose data source: Microsoft Sql Server and Data Provider:
.net framework data provider for sql server
5. Add server name: ALVI\SQLEXPRESS and the database name:
Customer
6. Click test Connection: i have got the message: "Test Connection Succeeded"
7. Click OK
"unable to add data connection. could not load file or assembly 'microsoft.sqkserver.management.sdk.sfc' verision=11.0.0, culture=netural, publickkeytoken=89845dcd8080cc91' or one of its dependenciec. The System cannot find the file specified."
I have already tried this method.
1) Microsoft SQL Server Management Objects
2) repair installed on Microsoft SQL Server System CLR Types
3) Microsoft SQL Server 2008 Native Client.
what's the problem? and what i need to do?
Thanks
ALVIHello,
Thank you for your post.
In order to check if the issue is related to your VS,
you could locate to the IDE folder then run these commands to check if it can help if you add a data connection in VS2012 Ultimate:
Please open Windows Explorer, and navigate to <Visual Studio Installation Path>\Common7\IDE
Devenv.exe /SafeMode: Launches the IDE in safe mode loading minimal windows.
Devenv.exe /ResetSettings: Restores the IDE's default settings, optionally resets to the specified VSSettings file.
Devenv.exe /ResetAddin: Removes commands and command UI associated with the specified Add-in.
Devenv.exe /ResetSkipPkgs: Clears all SkipLoading tags added to VSPackages.
And I did some search about this error and find a thread with the similar issue:
http://social.msdn.microsoft.com/Forums/en-US/efb83302-386b-460f-9467-edce28d61016/unable-to-add-a-data-connection-in-visual-studio
As VMzaure said, if you are using SQL Server Express, you need to specify the server name as
MyComputerName\SQLEXPRESS. But based on your post, I feel you are using SQL Server. If you are using SQL Server and have named instance, please try to specify the server name as MyComputerName\InstanceNameHere to check the result.
If still no help, according the error, it indicates that the problem is that the system cannot locate the right assembly (SQL Server SDK). So I think you may get better response and solutions
if you consult on SQL Server forums.
Thank you for your understanding.
Best regards,
Amanda Zhu
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Could not load file or assembly 'CrystalDecisions.Windows.Forms Error
Hello All,
I have created a Crystal Reports .Net Executable and it runs fine on the PC that it was built on. However, when I copy the exe application to another system and try to run it, I get the following error message:
System.InvalidOperationException was unhandled
Message="An error occurred creating the form. See Exception.InnerException for details. The error is: Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified."
Source="Sample Report"
StackTrace:
at Sample_Report.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190
at Sample_Report.My.MyProject.MyForms.get_Form1()
at Sample_Report.My.MyApplication.OnCreateMainForm() in C:\Users\saikaleya\AppData\Local\Temporary Projects\Sample Report\My Project\Application.Designer.vb:line 35
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at Sample_Report.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 78
InnerException: System.IO.FileNotFoundException
Message="Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified."
Source="Sample Report"
FileName="CrystalDecisions.Windows.Forms, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
FusionLog="WRN: Assembly binding logging is turned OFF.\r\nTo enable assembly bind failure logging, set the registry value [HKLM
Software
Microsoft
Fusion!EnableLog] (DWORD) to 1.\r\nNote: There is some performance penalty associated with assembly bind failure logging.\r\nTo turn this feature off, remove the registry value [HKLM
Software
Microsoft
Fusion!EnableLog].\r\n"
StackTrace:
at Sample_Report.Form1.InitializeComponent()
at Sample_Report.Form1..ctor()
InnerException:
Any tips/suggestions would be greatly appreciated.
P.S. I am using Crystal Reports 2008 and Visual Studio 2008.
Thank you in advance.A couple things here:
Your application is referencing the Windows form dll for the bundled version of Cr that comes with VS.NET 2008 and NOT the Crystal Reports 2008 runtime. You need to change the references in the project to 12.xxx assuming you have Crystal Reports 2008 SP0 installed (this is needed for it to work with .NET 2008)
You need to make sure you deploy the runtimes for the appropriate version. If you get your application upgraded to use all of the CR 2008 runtimes you will then need to deploy the runtimes to the machine you are deploying to. You can do this by using the merge modules or the server install msi to get them on the machine.
Jason -
Sharepoint 2010 - SPUCWorkerProcess - Could not create file
I have some type of permission issue that is preventing my User Code Host service from running (it starts then stops). I am seeing the following in my ULS:
03/01/2011 09:59:13.42 SPUCWorkerProcess.exe (0x0F78)
0x1254 SharePoint Foundation
Unified Logging Service f05l
High Could not create file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\\IH-PORTAL002.ulstest, HRESULT=0x80070005
03/01/2011 09:59:13.42 SPUCWorkerProcess.exe (0x0F78)
0x1254 SharePoint Foundation
Unified Logging Service f05n
High No permission to write on C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\
Followed by:
03/01/2011 09:59:16.64 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 09:59:16.77 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 09:59:16.78 SPUCHostService.exe (0x13A8)
0x0D00 SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
I have verified that the service account for the SPUCHostService is a domain account belonging to the the WSS_WPG local group (I also tried adding to the WSS_ADMIN_WPG group with no more success). The WSS_WPG
group has read and write access to the log folder mentioned above.
I started troubleshooting this when I tried to activate and use the CRM 2011 list control. And found that other sandboxed solutions also fail which lead me to look at the SharePoint 2010 User Code Host, which will not keep running.
I have a Sharepoint 2010 enterprise farm with one WFE and one seperate database server all on a single domain. The WFE is running on Windows 2008 sp2 (64 bit).
I look forward to your advice / suggestions.
PS. I have been working on this for a couple days, and have read many issues that seem to be related, but I have already checked that the Service is now set to automatic, that the service account is a member of the WSS_WPG group and should therefore
have rights to the Logs folder. It is also a member of the Local Administrators and the Performance Log Users group.
Fred ZilzAfter IISReset I don't see the Logs directory issue but I still have the following:
03/01/2011 14:00:53.35 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.46 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service ei0p
Monitorable - Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError)
at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32 retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading
perf counters for process "SPUCWorkerProcess".
03/01/2011 14:00:53.47 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
General 84yj
Medium Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
03/01/2011 14:00:53.49 SPUCHostService.exe (0x15E0)
0x13DC SharePoint Foundation
Sandboxed Code Service 0000
Unexpected - Process perf counters are disabled. Sandboxed code monitoring cannot continue.
03/01/2011 14:00:53.52 SPUCHostService.exe (0x15E0)
0x14AC SharePoint Foundation
General 84yi
Unexpected An SPPerformanceCounter was not properly disposed. This could cause excessive memory use.
03/01/2011 14:00:53.52 SPUCHostService.exe (0x15E0)
0x14AC SharePoint Foundation
General 84yi
Unexpected An SPPerformanceCounter was not properly disposed. This could cause excessive memory use.
Any ideas on what is going on with the Performance Counter?
Fred Zilz -
Could not load file/URL (file not found) error for JNLP file
I am completely baffled in trying to figure out why I am getting the following error for some JNLP files but not others:
Error: could not load file/URL specified: C:\Users\tom\AppData\Local\Temp\javaws2
java.io.FileNotFoundException: C:\Users\tom\AppData\Local\Temp\javaws2 (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)I have Googled around this forum and elsewhere, and have seen reports that this error is IE-specific, and seems to have something to do with no-cache headers being sent, or with the client browser's cache being full or turned off (which is not my case). I saw the information in the JavaWS FAQ, which recommended turning off security constraints for the JNLP's URI. I tried that, and it didn't help. One of the very baffling things is that I have created several variations of the JNLP file, with varying combinations of jars and property resources, and some combinations always work while other combinations never work. Here's an example:
<jnlp spec="1.0+" codebase="$$codebase">
<information>
<title>demo app</title>
<description>illustrates weird bug</description>
</information>
<resources>
<j2se version="1.5+"/>
<jar href="randomFile.jar"/>
<property name="xxx" value="xxxx"/>
<property name="swing.metalTheme" value="steel"/>
</resources>
</jnlp>The above file always fails with the error shown at the top of this message. However, if I remove either of the two properties, it works fine. And I have created other variations with lots of properties, some of which work. All of these variations are in the same directory in the war file, served by the exact same servlet (a slightly modified version of the jnlp.sample.servlet.JnlpDownloadServlet provided with JDK 1.6.0_3). Assuming that a no-cache header is the problem, what on earth could be causing some JNLP files to always be served with a no-cache header, while others are never served with a no-cache header?
On a related note, any recommended debugging techniques for seeing what headers are being transmitted? I tried adding a simple check for a "debug=true" parameter in the servlet that causes it to set the content type to "text/plain" instead of JNLP, and that allows me to see (rather than execute) the JNLP XML that's being returned, but it doesn't show me the HTTP headers that are being sent back. If any caching headers are being set, I think it must be being set by the servlet container itself, as it's nothing being set in the servlet code that I can see. So I don't see any way on the server side Java code to output or log the actual HTTP response (or is there?). Any tips in that regard much appreciated.
Edited by: TomC125468 on Aug 19, 2009 1:35 PMHi Luca-Sanna,
Thanks for the response. Re browsers, yes, it fails in IE but it succeeds in Firefox. The info on the JavaWS FAQ and other places all seem to indicate that it's an IE issue concerning handling of the cache-control headers.
I should check in my webserver forum (Sun WebServer 7) to see about logging options. Sniffing on the client side is not possible, as my app is required to use HTTPS exclusively, and unfortunately that also precludes a telnet GET request. -
This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
AndrewHi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Remote app on iPhone to view/control Logic screen when in iso booth?
When in my recording booth, I can't see my Logic Pro screen that is in my control room. I need to be able to see and adjust my mic level to get it right, press record, stop, etc... i.e. just very basic tracking functions. I could bring my MacBook Pro
-
I have downloaded the latest addition of fire fox changing the language to UK English. When I run the down lode under the Google box the system says that I am not running the latest version. I also have a Samson Tablet & having down loaded Firefox it
-
Unable to boot from bootcamp to macosx snow leopard in bootcamp ctrl panel
update to bootcamp 3.2 for win 32 winxp home sp2 bootcamp, open bootcamp ctrl pnl> select macosx to reboot> press enter> dialogue to restart now?> yes desktop freezes, i press ctrl alt del, .. nothing get the busy/working cursor this happened on the
-
IPhoto '11 Photo Album with Full-bleed Pages?
H o w d y ~ When creating an 8.5"x11" album in iPhoto '11, is it possible to remove the one-quarter inch white border that appears along the top, right, and left sides? When viewed in iPhoto, my album has no white borders [the pages are full-bleed]
-
Process Order release rejected
Hi All, I want release the process order but it shows the error like it is rejected . in that i have seen the master data all are assigned to that process order and it shows like this release rejected (check log) message no:C2039. what is