Could not resolve CISCO-CAPWAP-CONTROLLER

I have a access point in Singapore which is trying to connect to a controller in Canada. Think I am having a latency issue. Is there a way of increasing the timeout period to allow the AP to join the controller before the initial request fails?
Thanks

Hi
Make sure AP regulatory domain matches the country configured on your WLC. If that all good you can configure this on AP via console & AP should go & register to your WLC.
LAP#debug capwap console cli
This command is meant only for debugging/troubleshooting
Any configuration change may result in different
behavior from centralized configuration.
CAPWAP console CLI allow/disallow debugging is on
LAP#capwap ap primary-base <WLC-Name> <WLC-Mgt-IP>
If not, post the full AP console output while it is trying to register.
HTH
Rasika
**** Pls rate all useful responses ****

Similar Messages

Could not resolve CISCO-LWAPP-CONTROLLER

Hi..
I have AP Cisco Aironet 1250. I want upgrade to LWAPP. AP using static IP address. When AP try to joinm error message displayed "DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER".
Loading file /c1250...
extracting info (292 bytes)
Image info:
    Version Suffix: k9w8-.124-10b.JDD
    Image Name: c1250-k9w8-mx.124-10b.JDD
    Version Directory: c1250-k9w8-mx.124-10b.JDD
    Ios Image Size: 4352512
    Total Image Size: 4352512
    Image Feature: WIRELESS LAN|LWAPP
    Image Family: C1250
    Wireless Switch Management Version: 4.2.207.0
Extracting files...
c1250-k9w8-mx.124-10b.JDD/ (directory) 0 (bytes)
extracting c1250-k9w8-mx.124-10b.JDD/c1250-k9w8-mx.124-10b.JDD (3956889 bytes)
%LWAPP-5-!CHANGED: LWAPP changed state to JOIN
%LWAPP-5-CHANGED: LWAPP changed state to IMAGE
Error messages:
*Jun 30 09:46:16.491: %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
*Jun 30 09:46:16.491: %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER
*Jun 30 09:46:16.491: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Jun 30 09:46:16.651: %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER
*Jun 30 09:46:16.651: %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER
*Jun 30 09:46:16.651: Logging LWAPP message to 255.255.255.255.
Any help?
Thanks.

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
You configuration is not correct. You can remove the line ‘domain-name CISCO-LWAPP-CONTROLLER.mydomain.com’ or replace it with ‘domain-name mydomain.com’ and configure the DNS server with both "CISCO-LWAPP-CONTROLLER.mydomain.com" and "CISCO-CAPWAP-CONTROLLER.mydomain.com" pointing to 172.16.00.25.
I suggest that you remove this line and forget about DNS and go for DHCP option 60 and 43 as you already have configured. You do not need both the DNS configuration and DHCP option 43.
Since you have configured ‘option 60 ascii "Cisco AP c1250"’ and ‘option 43 hex f104ac100019’ then your 1250s should try to associate with the controller 172.16.00.25.
Please post more of the syslog and look for events regarding DHCP option 43.
Is the address 172.16.00.25 for the WLC correct?
Regards,
André

I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)

I am trying to get an AP to associate with a wireless Controller but keep getting this error message (%CAPWAP-3-ERRORLOG:Could not resovle CISCO-CAPWAP-CONTRPLLER)
I can ping through to the WLC and the AP.

Thanks a lot Loe for the Feedback. The issue was not my configuration but rather the type of Wireless LAN controller I have, the WLC does not support my AP's. I have a Cisco 520 series WLC and got to know they only work with the 500 series AP's. my AP's are 1130 series meaning i have to get another controller or change the APs.
thanks once again..

ACL migration Error : 1210 could not find a domain controller for domain "Test Domain" (Old Domain)

Hi
We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.
subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
\\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
Mapping file contains : Domain Users=NewDomain_Users
But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
will not be processed."

Hello,
how in detail is DNS set up in each domain?
Any problems when using nslookup to verify?
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Cisco CAPWAP controller ????

Hi,
Really sorry if this isn't the right place but am desperate for help!
Have applied for a dream job for me to get into networking but one of the things that they have asked for that I haven't heard of before is a Cisco CAPWAP controller, is anyone able to explain the basics or it for me?
From quick web search it seems to be a type of wireless access point!
Any info would be useful.
Thanks
Sent from Cisco Technical Support iPad App

CAPWAP
The controller-based solution allows the splitting of 802.11 functions between the controller-based AP, which handles real-time
portions of the standard, and the Cisco WLC, which handles items that are not time sensitive. This model is called split MAC .
The AP handles the portions that have real-time requirements, such as the following:
■ Beacons management
■ 802.11 encryption and decryption
■ Frame buffering for dozing stations
■ Probe responses
■ Air monitoring for interferences and rogues
The controller handles all other functionalities, such as the following:
■ 802.11 authentication and association
■ QoS and security management
■ Mobility (roaming) management
■ RF management
■ Bridging to and from the DS in the right VLAN
Lightweight APs (LAP) communicate with the controller using a specific protocol, Control and Provisioning of Wireless Access
Points (CAPWAP). The LAP encapsulates all 802.11 data frames received from a client into a CAPWAP frame. The data frame
portion is simply encapsulated into a CAPWAP frame, and is not encrypted by default (data part encryption is possible but optional).
The LAPs also constantly exchange encrypted CAPWAP control messages with the controller via the Radio Resource Management
(RRM) engine for real-time RF management, including
■ Radio resource monitoring
■ Dynamic channel assignment
■ Interference detection and avoidance
■ Dynamic transmit power control
■ Coverage hole detection
This come from a book wrote by Jerome Henry

"Could not resolve a persistence unit" error...

Hello,
I created a Netbeans Visual Web application. I added an Entity Class from a database table. A resource is added into Server Resources part. when I look at its properties, I see that it's JNDI name is set to "bitkiwiki" and I check the Sun Application Server's JDBC Resources and I see "bitkiwiki" in JDBC Resources.
My controller class has a EntityManagerFactory element:
@PersistenceUnit(unitName = "bitkiwiki")
private EntityManagerFactory emf;When I compile the project it compiles successfully but when I deploy it, I get an error like this:
Deploying application in domain failed; Deployment Error -- Could not resolve a persistence unit corresponding to the persistence-unit-ref-name .......
The Persistance UnitName exists in the server resources but it still complains about it.
What's the problem you think?
Thanks.

In the persistence.xml you have something like this:
<persistence-unit name="EJBCustomerPU" transaction-type="JTA">
<jta-data-source>cust</jta-data-source>
<properties>
</properties>
</persistence-unit>
The unitName in the annotation should equal "EJBCustomerPU". I think the "bitkiwiki" is wrong. The "cust" in the above persistence.xml should be the resource you mention in the jdbc section of the app server admin.

Problem with Cisco Bars after Database Republish ("Could not find Cisco Unified database on this server")

OS Version: 2000.4.3a
OS Service Release: 2000.4.5bSR21
OS Upgrade: 2000.4.5a
Bars Version: 4.0.15000
CUCM Version: 4.2(3)sr4b
During the upgrade process of our CUCM 4.2(3) to version CUCM 4.2(3)sr4b the database replication between our 2 servers (1x pub, 1x sub) failed. After fixing this via dbhelper tool (everthing´s green and smiling again) service seemed to be ok.
But now Cisco Bars does not work anymore. The backup process of the publisher fails with "Error=[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL-Server connection." So it looks like some kind of database setting for bars is misconfigured after the republishing process.
Yesterday I tried to reinstall BARS (now in the newest version 4.0.150000), but the same error message occured. Now I get the message "Could not find Cisco Unified database on this server" when I try to configure the Backup source within BARS.
Curiously the backup of our second CCM (sub) works as expected (but without CDR and TFTP Data). The "BackAdmin" User exists and is not locked (and wasn´t changed manually at all).
I am runnig out of ideas... :-(
Any hint or idea on how to fix this is kindly appreciated
best regards
Michael

Mike,
I don't have anything definitive here but I am wondering if there is a discrepency between the database names. In SQL Enterprise Manager, you can go to the Publisher and see what the current database name is. It will be the one being replicated and will take the form of CCM0300 or CCM0301 or CCM0302. You should see more than one. Anyway, take note of the name.
Then on the Publisher launch regedit and go to HKLM\Software\Cisco Systems, Inc.\DBL\
Look at the values for DBConnection0 and DBConnection1.
It will be something like DSN=CiscoCallManager;Server=;DATABASE=;Trusted_Connection=yes
Does the in the DSN match what you expect?
Also, going to back to SQL Enterprise Manager, check out the permissions on the database (Right Click->Properties, go to Permissions tab).
Another thing to check if you think it is permissions related is the AdminUtility.exe (c:\program files\cisco\bin\). This can be used to resync system account passwords.
TBH, I am just shooting in the dark here but these are things I would check.
Regards,
Bill

DNS Set Up system throw as ORA-12154; TNS :could not resolve the connect id

Hi,
While i'm creating DNS set up system throws below message
unable to connect
SQLState=08004
DNS Set Up for instantclient(win32-10.2.0.4) system throw as ORA-12154; TNS :could not resolve the connect identified specified.
operationg system:xp
dir path:C:\Oracle\instantclient10_2
TNSNAMES.ORA(C:\Oracle\instantclient10_2\NetWork\ADMIN) Contants
YourTNSName =sankar
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT =1521))
(CONNECT_DATA =
(SID =sankar)
(SERVER = DEDICATED)
dir contains:
sqresus.dll,
sqresja.dll
sqoras32.dll
sqora32.dll
oraociei10.dll
oraocci10.dll
orannzsbb10.dll
ojdbc14.jar
ocijdbc10.dll
ociw32.dll
oci.dll
classes12.jar

user7197586 wrote:
Hi
I have been created one DBLink it's created but when i am trying to access the data through the link it's raise error as
"ORA-12154: TNS:could not resolve the connect identifier specified"
CREATE
PUBLIC DATABASE LINK
Vrd_tcplink
CONNECT TO
"SAPVRD"
IDENTIFIED BY
"manager123"
USING
'VRD_TCP.WORLD'
created this above dblink
Kindly Suggest to wau out.
Regards,
Sachin
When using a dblink, the database with the link is acting as a client to the remote database ... exactly like sqlplus running on the db server.
read: http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ ora-12154tns-03505

Session closed due to Error: Could not Resolve hos...

Hi,
I''m trying to sort out connection issues for my auntie. She has a BT Homehub 5 with the latest firmware.
However, she is suffering from reboots and lost connections all the time. I have reviewed the log files and it is full of the following messages:
74.270000 CWMP Session closed due to error: Could not resolve host
Any ideas as i am stumped. Its a fairly recent installation ( 4 months or so) and she has only recently started to use the Wifi. It was ok when wired.
Simon

If it is DEFINITELY a wireless problem only, then download InSSider and run the program. This will tell you if you have are using a congested wifi channel.......
You can then go into the settings and after picking a less congested channel, turn off the "smart wireless" setting.....
Although the wireless problem wouldn't cause the rebooting problem......
If you found this post helpful, then please click the star on the left, after all, I'm only trying to help........

Could not resolve fx:Script (or fx: Declarations to a component implementation

Hi,
I am trying to compile a file into swf using mxmlc in command line. When it is a very simple mxml, compile is successful. But when the file contaion the fx name space, I get a compile error like: could not resolve COMPONENT_NAME to a component implementation.
I have to be able to do this, without the help of Flash Builder because I am working on a project where I will need to generate swf files from mxml files which we generate the code of.
I tried it with SDK version 4.0.0., version 4.1.0 build 16076 and 4.5.0. build 20967. And I also tried it in 3 different computers. Note: Our notebooks has Windows 7 OS - locale:Turkish.
I read that this error is specific to some locales like Turkish here: http://forums.adobe.com/message/892431#892431, . But I couldnt find the solution.
Any suggestions?
The simple code I am trying to compile is(which is generated by Flash Builder 4 and can be compiled there):
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                  xmlns:s="library://ns.adobe.com/flex/spark"
                  xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
     <fx:Declarations>
          
     </fx:Declarations>
</s:Application>

Could you please file a bug at http://bugs.adobe.com/jira with sample code that fails to compile on a Turkish system, so that we can track this problem and fix it in a future release?
Gordon Smith
Adobe Flex SDK Team

Upgrade from Burrito to 4.5, Could not resolve MobileApplication tag?

Hello:
As the topic states, I just upgraded from Burrito to 4.5 today. I imported my app and I get the following error:
Could not resolve <s:MobileApplication> to a component implementation.    ...    line 6    Flex Problem
Did they take out MobileApplication? If so how can I support the back button on my Xoom device now?
Paul

MobileApplication was renamed to ViewNavigatorApplication.
Here's an example of how you would cancel the back button in the final 4.5 release:
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView"
        backKeyPressed="view1_backKeyPressedHandler()">
    <fx:Script>
        <![CDATA[
            private function view1_backKeyPressedHandler():void {
                event.preventDefault();
                // do something else here
        ]]>
    </fx:Script>
</s:View>

AIR SDK 3.6 Could not resolve component

I have Flash Builder 4.6 and the AIR SDK version is 3.5, Today i update the AIR SDK version to 3.6, However when i debug the appliction, the Flash Builder popup a error for "Could not resolve <s:ViewNavigatorApplication> to a component implementation." .
I have downloaded AIR SDK3.6 from here: http://www.adobe.com/devnet/air/air-sdk-download.html

Hi Jack,
Please download AIR SDK from a small note below on http://www.adobe.com/devnet/air/air-sdk-download.html
for flex users.
Note : Flex users will need to download the original AIR SDK without the new compiler.
Please let us know if this fixes your issue.
Thanks,
Krati

Could not resolve...

Hi everyone,
I'm currently playing around with the examples in AFCS and
noticed when running Flexternal.mxml that I get an error at line 27
<rtc:AdobeHSAuthenticator authenticationKey="{authToken}"
id="auth"/>
Severity and Description Path Resource Location Creation Time
Id Could not resolve <rtc:AdobeHSAuthenticator> to a
component implementation. AFCS_Playground/src Flexternal.mxml line
27 1237318325609 57
Any ideas? I'm pretty sure I set up the SDK properly,
thanks

Hi,
There was a bug on our side in the example since we updated
the namespace recently in last release. So, in the application tag
in Flexternal.mxml you need to specify xmlns:rtc="AfcsNameSpace"
instead of "CocomoNameSpace" . and the error will be fixed. I am
also attaching the entire code with the update in case you need it.
Thanks again for the catch.
Regards
Hironmay Basu

Error: Could not resolve s:SolidColor to a component implementation

So I have a library project and in that project I have a CustomDataGridBackgroundSkin file which is as follows:
<?xml version="1.0" encoding="utf-8"?>
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009"
             xmlns:s="library://ns.adobe.com/flex/spark"
             xmlns:mx="library://ns.adobe.com/flex/mx"
             minWidth="25" minHeight="25">
    <fx:Declarations>
        
    </fx:Declarations>
    
    <s:Rect left="0" right="0" top="0" height="100%" >
        <s:fill>
            <spark:SolidColor color="0x968f89" alpha="1" />
        </s:fill>
    </s:Rect>
</s:SparkSkin>
I am simply trying to get an ant task to compile this library to SWC, but I am getting a " Error: Could not resolve <s:SolidColor> to a component implementation" error during compile. The only way to fix it is to add these lines of code (bold).
<?xml version="1.0" encoding="utf-8"?>
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009"
             xmlns:s="library://ns.adobe.com/flex/spark"
             xmlns:mx="library://ns.adobe.com/flex/mx"
            xmlns:spark="mx.graphics.*"
             minWidth="25" minHeight="25">
    <fx:Declarations>
        
    </fx:Declarations>
    
    <s:Rect left="0" right="0" top="0" height="100%" >
        <s:fill>
            <spark:SolidColor color="0x968f89" alpha="1" />
        </s:fill>
    </s:Rect>
</s:SparkSkin>
I can also get this error to go away if I put this line in my build.xml file: "<include-sources dir="${src.dir}" includes="*"/>"
But then I get this error => "[compc] Error: Unsupported file type: C:\dev_projects\features\flex4version\web\OneVoice\src\components.xml"
components.xml is my manifest file.
Anyone know what the issue is? Why would I need the xmlns:spark="mx.graphics.*" namespace when I have xmlns:s="library://ns.adobe.com/flex/spark"?

Curious. Which version of the Flex SDK are you using?
Does this work if you try in a brand new project using Flex 4.1 or Flex Hero?
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx">
    <s:controlBarContent>
        <s:Button label="goto s1" click="currentState = 's1';" />
        <s:Button label="goto s2" click="currentState = 's2';" />
        <s:Button id="sdkVer" initialize="sdkVer.label = mx_internal::VERSION;" click="System.setClipboard(sdkVer.label);" />
    </s:controlBarContent>
    <s:states>
        <s:State name="s1" />
        <s:State name="s2" />
    </s:states>
    <s:Rect left="30" right="20" top="20" bottom="30" >
        <s:fill>
            <s:SolidColor color="0x968f89" color.s2="haloOrange" alpha="1" />
        </s:fill>
    </s:Rect>
</s:Application>
Peter

Could not resolve mx:DataGrid to a component implementation

I'm very new at this. Building a mobile app. Running the latest Flex/FlashBuilder (4.6). When I compile I get this error: "could not resolve <mx:DataGrid> to a component implementation". Here is my code:
<?xml version="1.0" encoding="utf-8"?>

<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    title="Jobs List">
          <fx:Script>
                    <![CDATA[
                              import mx.collections.*;
                              private var DGArray:Array = [
                                        {Lease:'Bagby Heirs', Well:'1', Location:'Quitman', Customer:'Fair Oil Company', ScheduleDate:'2/23/2012', ServiceDate:'5/16/2012'},
                                        {Lease:'ITU', Well:'301', Location:'Ingram Trinity', Customer:'Southwest Operating, Inc.', ScheduleDate:'3/19/2012', ServiceDate:'4/25/2012'},
                                        {Lease:'ITU', Well:'81', Location:'ITU', Customer:'Southwest Operating, Inc.', ScheduleDate:'3/19/2012', ServiceDate:'4/25/2012'},
                                        {Lease:'Tolliver A', Well:'5', Location:'Turner Town', Customer:'SEDI', ScheduleDate:'4/16/2012', ServiceDate:'5/11/2012'},
                                        {Lease:'W R Cady', Well:'1', Location:'Coffield', Customer:'Green River Resource', ScheduleDate:'5/9/2012', ServiceDate:'4/10/2012'},
                                        {Lease:'Royal National Bar', Well:'2', Location:'Coffield', Customer:'Green River Resource', ScheduleDate:'5/9/2012', ServiceDate:'4/10/2012'},
                                        {Lease:'Pan American L', Well:'1', Location:'Chandler', Customer:'East Texas Oil & Gas', ScheduleDate:'5/14/2012', ServiceDate:'6/8/2012'},
                                        {Lease:'Paluxy B Sand', Well:'5', Location:'West Tyler', Customer:'Culver & Cain', ScheduleDate:'6/1/2012', ServiceDate:'5/25/2012'},
                                        {Lease:'Wh Pittman Hei', Well:'2', Location:'Quitman', Customer:'Southwest Operating, Inc.', ScheduleDate:'7/10/2012', ServiceDate:'6/18/2012'},
                                        {Lease:'Vivian Pruitt', Well:'1', Location:'Crow - Hwy 80M', Customer:'Buffco Productions, Inc.', ScheduleDate:'8/7/2012', ServiceDate:'8/29/2012'}
                              [Bindable]
                              public var initDG:ArrayList;
                              //Initialize initDG ArrayList variable from the Array.
                              //If you use this technique to process an HTTPService,
                              //WebService, or RemoteObject result, use an ArrayCollection
                              //rather than an ArrayList.
                              public function initData():void {
                                        initDG=new ArrayList(DGArray);
                    ]]>
          </fx:Script>
          
          <fx:Declarations>
                    
                      <fx:Component className="AlertMsgDay">
                              <s:SkinnablePopUpContainer x="70" y="300">
                                        <s:TitleWindow title="Filtering" close="close()">
                                                  <s:VGroup horizontalAlign="center" paddingTop="8" paddingBottom="8" paddingLeft="8" paddingRight="8" gap="5" width="100%">
                                                            <s:Label text="This button will filter jobs to show only TODAY."/>
                                                            <s:Button label="OK" click="close()"/>
                                                  </s:VGroup>
                                        </s:TitleWindow>
                              </s:SkinnablePopUpContainer>
                    </fx:Component>
                    <fx:Component className="AlertMsgWeek">
                              <s:SkinnablePopUpContainer x="70" y="300">
                                        <s:TitleWindow title="Filtering" close="close()">
                                                  <s:VGroup horizontalAlign="center" paddingTop="8" paddingBottom="8" paddingLeft="8" paddingRight="8" gap="5" width="100%">
                                                            <s:Label text="This button will filter jobs to show only THIS WEEK."/>
                                                            <s:Button label="OK" click="close()"/>
                                                  </s:VGroup>
                                        </s:TitleWindow>
                              </s:SkinnablePopUpContainer>
                    </fx:Component>
          </fx:Declarations>
          <s:BorderContainer x="10" y="111" borderColor="#808080" cornerRadius="5" borderWeight="2" width="98%" height="369">
                    <s:Scroller width="100%" height="363" verticalScrollPolicy="on">
                              <s:Group width="100%" height="100%">
                                        <mx:DataGrid id="myGrid" width="900" height="350" dataProvider="{initDG}" > <<<< THE ERROR IS HERE
                                                  <mx:columns>
                                                            <mx:DataGridColumn dataField="Lease" />
                                                            <mx:DataGridColumn dataField="Well" />
                                                            <mx:DataGridColumn dataField="Location" />
                                                            <mx:DataGridColumn dataField="Customer" />
                                                            <mx:DataGridColumn dataField="ScheduleDate" headerText="Schedule Date" />
                                                            <mx:DataGridColumn dataField="ServiceDate" headerText="Service Date" />
                                                  </mx:columns>
                                        </mx:DataGrid>
                              </s:Group>
                    </s:Scroller>
          </s:BorderContainer>
          <s:Label x="10" y="10" width="96" height="53" fontSize="24" text="Sort by:"
                               verticalAlign="middle"/>
          <s:Button id="btn_show_today" x="104" y="11" width="105" height="53" label="Today"
                                fontSize="13" fontWeight="bold" click="(new AlertMsgDay()).open(this, false);"/>
          <s:Button id="btn_show_week" x="216" y="11" width="105" height="53" label="Week"
                                fontSize="13" fontWeight="bold" click="(new AlertMsgWeek()).open(this, false);"/>
          <s:Button x="348" y="10" width="184" height="53" label="Edit this Job" fontSize="18" click="navigator.pushView(views.JobFormView);"/>
</s:View>

I'm very new at this. Building a mobile app. Running the latest Flex/FlashBuilder (4.6). When I compile I get this error: "could not resolve <mx:DataGrid> to a component implementation". Here is my code:
<?xml version="1.0" encoding="utf-8"?>

<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    title="Jobs List">
          <fx:Script>
                    <![CDATA[
                              import mx.collections.*;
                              private var DGArray:Array = [
                                        {Lease:'Bagby Heirs', Well:'1', Location:'Quitman', Customer:'Fair Oil Company', ScheduleDate:'2/23/2012', ServiceDate:'5/16/2012'},
                                        {Lease:'ITU', Well:'301', Location:'Ingram Trinity', Customer:'Southwest Operating, Inc.', ScheduleDate:'3/19/2012', ServiceDate:'4/25/2012'},
                                        {Lease:'ITU', Well:'81', Location:'ITU', Customer:'Southwest Operating, Inc.', ScheduleDate:'3/19/2012', ServiceDate:'4/25/2012'},
                                        {Lease:'Tolliver A', Well:'5', Location:'Turner Town', Customer:'SEDI', ScheduleDate:'4/16/2012', ServiceDate:'5/11/2012'},
                                        {Lease:'W R Cady', Well:'1', Location:'Coffield', Customer:'Green River Resource', ScheduleDate:'5/9/2012', ServiceDate:'4/10/2012'},
                                        {Lease:'Royal National Bar', Well:'2', Location:'Coffield', Customer:'Green River Resource', ScheduleDate:'5/9/2012', ServiceDate:'4/10/2012'},
                                        {Lease:'Pan American L', Well:'1', Location:'Chandler', Customer:'East Texas Oil & Gas', ScheduleDate:'5/14/2012', ServiceDate:'6/8/2012'},
                                        {Lease:'Paluxy B Sand', Well:'5', Location:'West Tyler', Customer:'Culver & Cain', ScheduleDate:'6/1/2012', ServiceDate:'5/25/2012'},
                                        {Lease:'Wh Pittman Hei', Well:'2', Location:'Quitman', Customer:'Southwest Operating, Inc.', ScheduleDate:'7/10/2012', ServiceDate:'6/18/2012'},
                                        {Lease:'Vivian Pruitt', Well:'1', Location:'Crow - Hwy 80M', Customer:'Buffco Productions, Inc.', ScheduleDate:'8/7/2012', ServiceDate:'8/29/2012'}
                              [Bindable]
                              public var initDG:ArrayList;
                              //Initialize initDG ArrayList variable from the Array.
                              //If you use this technique to process an HTTPService,
                              //WebService, or RemoteObject result, use an ArrayCollection
                              //rather than an ArrayList.
                              public function initData():void {
                                        initDG=new ArrayList(DGArray);
                    ]]>
          </fx:Script>
          
          <fx:Declarations>
                    
                      <fx:Component className="AlertMsgDay">
                              <s:SkinnablePopUpContainer x="70" y="300">
                                        <s:TitleWindow title="Filtering" close="close()">
                                                  <s:VGroup horizontalAlign="center" paddingTop="8" paddingBottom="8" paddingLeft="8" paddingRight="8" gap="5" width="100%">
                                                            <s:Label text="This button will filter jobs to show only TODAY."/>
                                                            <s:Button label="OK" click="close()"/>
                                                  </s:VGroup>
                                        </s:TitleWindow>
                              </s:SkinnablePopUpContainer>
                    </fx:Component>
                    <fx:Component className="AlertMsgWeek">
                              <s:SkinnablePopUpContainer x="70" y="300">
                                        <s:TitleWindow title="Filtering" close="close()">
                                                  <s:VGroup horizontalAlign="center" paddingTop="8" paddingBottom="8" paddingLeft="8" paddingRight="8" gap="5" width="100%">
                                                            <s:Label text="This button will filter jobs to show only THIS WEEK."/>
                                                            <s:Button label="OK" click="close()"/>
                                                  </s:VGroup>
                                        </s:TitleWindow>
                              </s:SkinnablePopUpContainer>
                    </fx:Component>
          </fx:Declarations>
          <s:BorderContainer x="10" y="111" borderColor="#808080" cornerRadius="5" borderWeight="2" width="98%" height="369">
                    <s:Scroller width="100%" height="363" verticalScrollPolicy="on">
                              <s:Group width="100%" height="100%">
                                        <mx:DataGrid id="myGrid" width="900" height="350" dataProvider="{initDG}" > <<<< THE ERROR IS HERE
                                                  <mx:columns>
                                                            <mx:DataGridColumn dataField="Lease" />
                                                            <mx:DataGridColumn dataField="Well" />
                                                            <mx:DataGridColumn dataField="Location" />
                                                            <mx:DataGridColumn dataField="Customer" />
                                                            <mx:DataGridColumn dataField="ScheduleDate" headerText="Schedule Date" />
                                                            <mx:DataGridColumn dataField="ServiceDate" headerText="Service Date" />
                                                  </mx:columns>
                                        </mx:DataGrid>
                              </s:Group>
                    </s:Scroller>
          </s:BorderContainer>
          <s:Label x="10" y="10" width="96" height="53" fontSize="24" text="Sort by:"
                               verticalAlign="middle"/>
          <s:Button id="btn_show_today" x="104" y="11" width="105" height="53" label="Today"
                                fontSize="13" fontWeight="bold" click="(new AlertMsgDay()).open(this, false);"/>
          <s:Button id="btn_show_week" x="216" y="11" width="105" height="53" label="Week"
                                fontSize="13" fontWeight="bold" click="(new AlertMsgWeek()).open(this, false);"/>
          <s:Button x="348" y="10" width="184" height="53" label="Edit this Job" fontSize="18" click="navigator.pushView(views.JobFormView);"/>
</s:View>

Could not resolve CISCO-CAPWAP-CONTROLLER

Similar Messages

Maybe you are looking for