Could not save because the ICC profile description is invalid

I'm getting this error whenever trying to do a "save" or "save as" from Photoshop CC. I've tried converting to different color profiles but that doesn't seem to make a difference. Even if I create a new blank document and try to save it, I get the same error message.
I'm on a Mac running 10.8.5. Doing a search for the exact error message has come up empty. Previous versions had a similar error but it occurred upon opening a file, not saving. So if anyone has some thoughts, it would be greatly appreciated.

Same error intermittently on different files. Windows7 64bit CS4. Saving a file in Photoshop - working from local hard drive - and got the file in use can not save error. We tried changing the name, saving as a different file type with no success. I closed absolutely every application that was running and then stopped all non windows processes from Task Manager and still file in use.
I was finally able to save by choosing "NONE" for the preview instead of Tiff 8-bit in the save options.
The bug is in Photoshop and it is putting a file lock on the preview file that it creates and then not alowing any save with the preview option checked.
After saving without a preview we could close PS and reopen then open the saved file and resave with the preview selected. Closing PS unlocked the preview file.

Similar Messages

Using Photoshop Elements 12 on my MacBook Pro laptop, when saving a file I have been working on I get the following message although there is at least 50GB free space on the hard drive: Could not save because the disk is full.

I have been making Christmas Cards, working in layers and then flattening the image. However, I am unable to save the final image as I get the following message: Could not save because the disk is full. Looking at the system report for my laptop shows there is 52GB of free space.

Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point.

InD blocking Ps to save a file / Could not save * because the file is already in use error

Many users have reported a Photoshop Could not save * because the file is already in use error in many different circumstances.
I place raw jpgs in InDesign document, then open them in Photoshop via Edit original order to adjust them. On random occasions Ps gives me that annoying error. So i found a little trick to avoid saving that image under a different name and relinking it plus reloading Ps since the error repeats on other pictures to.
All you have to do is: when Ps gives error, (Cmd-Tab) switch to InD, directly select the worked jpg in image frame (one that you try to save in Ps) and simply move it left-right (or move it and Undo). Now you can save it without problem.

JPEG is a "lossy" compression format. Every time you save as jpeg you recompress and throw away a little more information. In addition, jpeg does not support transparency or layers, both very useful features for woring with images. For example, you can add an adjustment layer in Photoshop to do your adjustments non-destructively for may of the things that you can do using Image > Adjustments... which will change your pixel data permanently. Throw away an adjustment layer and you image data is untouched. Also, ID allows you to place a layered image and control layer visibility from within ID, making it possible to multi-purpose a single file by showing or hiding various layers.

PS CS4 could not save because the file is locked

I saw this post, my problem is very similar, but this solution does not solve my problem:
http://forums.adobe.com/message/2121454#2121454
Everytime I try to save a photoshop file I get the "Could not save becasue this file is locked" -- and then I go to save again and it does save, becasue the file has disappeared from where I had originally saved it!
This is VERY irritating, as it is not happening EVERY time I try to save a photoshop file.
In reference to the previous post about this, I do not use Spotlight, and often I do not have anything else open when working on these photoshop files.
I am using CS4, and this occurs when saving files both on and off a server.
I am afraid I will at some point end up losing a file.
Any suggestions?

No anti-virus software (they cause far more problems than they solve, at least on a semi-secure network), I don't leave Bridge running. iTunes is running, so is InerTrak (time tracking software)... so it has to be Spotlight or Time Machine unless Activity Monitor will lock files. Or it could be Quicksilver, which creates indices like Spotlight.
First thing I'm doing is adding all my hard drives to "Prevent Spotlight from searching these locations" and we'll see if this comes up again.
Could it be the Finder? Does the Finder lock the file while reading the thumbnail?
I'm surprised that there's no way to tell what process has locked the file.
OK, last bit: Why doesn't Photoshop lock the file when it's open so that other programs won't open it?

CC 2014 could not save because the document is bigger than 2 gigabytes

I am working with a large files, currently it has 149 layers, all of which are high resolution photographs. It is part of my final degree show work and i am needing to save all of the layers with the image size remaining a4- this is so that if a few of the files print differently in colour to another i can go back an re-edit from the original. Unfortunately I've got to the stage that the work is over 2 gb in size and now am completely stuck as i have no idea how to save a file this large. I've only been using photoshop since September and so I'm not overly familiar with all of the photoshop features...
I have compressed files to save as tiff or jpg and my plan is to do this for printing but i do really want to keep my layers. I have tried using the large document format but i get exactly the same message... please help!!!!!!

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

PSCS4 could not save because the file is locked or was left open

Hello—
I'm getting this error a lot, maybe once out of every dozen attempts to save. This occurs on files that are indeed open... because I've opened them in Photoshop! I open the file, make a change, hit CMD-S and get this message.
The finder's info panel says that I have permission to read and write the file.
This happens with multiple file types, not just one file.
All my work is done locally. Not trying to load or save across a network or any such.
Any guesses what might be going on? Obviously it's easy to work around. I "Save As" and give it a new name, then later delete the old file and rename the new one. Still, it's annoying, especially after waiting 10 minutes for a save to complete on a large file, then having to start over.
Thanks in advance!
Steve

No anti-virus software (they cause far more problems than they solve, at least on a semi-secure network), I don't leave Bridge running. iTunes is running, so is InerTrak (time tracking software)... so it has to be Spotlight or Time Machine unless Activity Monitor will lock files. Or it could be Quicksilver, which creates indices like Spotlight.
First thing I'm doing is adding all my hard drives to "Prevent Spotlight from searching these locations" and we'll see if this comes up again.
Could it be the Finder? Does the Finder lock the file while reading the thumbnail?
I'm surprised that there's no way to tell what process has locked the file.
OK, last bit: Why doesn't Photoshop lock the file when it's open so that other programs won't open it?

Could not save because the file is already in use....

For the last couple of days I have gotten this error message several times. It seems it only happens when I do a 'Photo Merge' initiated in Bridge.
I have Adobe CS4 Extended on Vista.
In my 18 years of working with PS I have never gotten this before. I have tried everything, closing all applications, except PS, changing the file name, changing the file extension, nothing works.
I have also researched this topic in the forums. They pertain mostly to Apple computers, and I have not seen a satisfactory solution, explanation, or 'workaround.'
I sure hope hope somebody can help me with this.
Many thanks!
christian

Hi
I have run into this a couple of times, though not in a while.
I believe I got around it by selecting Save AS and saving the file with a new name i.e. Panorama B.tif or something to that effect.
That seemed to convince it that I wasn't trying to save something that was in use someplace else.
Mike

Error on Windows 7 RC 64bit - "Could not save because the file is already in use or left open."

This is constantly happening when I try to save and replace a JPG in the same folder or save as a copy in the same folder. Sometimes it seems to happen when I even save to another folder, though I've also been able to workaround this by doing that (though it's inconvenient and messes with my folder structure).
A tmp file is saved successfully every time, and I can manually rename the tmp file to the desired filename (as another very inconvenient workaround).
I see on these Forums that this save error is somewhat common in Adobe products, but I don't see a report of this consistently happening on this particular platform. I appreciate it's a beta (RC) of Windows 7 and therefore may not be technically supported (yet?).
Any ideas or fixes please?

Try resetting the editor preferences by pressign alt + ctrl + delete key on start and clicking edit on welcome screen.
-Garry

ICC profile description is invalid

I loaded PSE 8 on my Dell M1530 running Vista. Whenever I try to start PS8 I get "could not initialize Photoshop because the ICC profile description is invalid" and the program quits. I've tried removing and reinstalling PSE8 and it still errors. Any idea what I can do?

There are three steps in installing a color profile in Windows. First they have to be in your system32 (or syswow whatever\spool\drivers\color folder. Then as you have done you run the install. But then you have to register the profile for the device type (display\printer\etc.).
I think placing the color space profiles has already been covered in another reply.
You have already reset preferences so PSE has rebuilt its cache of scripts and resources.
Switch the default monitor profile in Win color management applet to another to another one just to see if that solves your problem. PSE doesn't offer a choice of display profile so I imagine it uses your set default.
Also there are two profile version types. Version 4 trips uup some applications especially for printing. Version 2 should be used for displays and works best for printers as well.
These Win utilties will show the version type:
http://www.color.org/resource2.xalter get
ICC Profile Inspector - opens an ICC profiles and makes the contents readable
Profile Dump - an example utility built using SampleICC that reads profiles and checks them for conformance
In each you'll see the complete version number. In one of those two you have to switch thefile type to .icm or .icc. The other shows both.

Could not save because file is locked

I have Photoshop CS6 and I have never had a problem with this before -
All of a sudden I am getting an error message when saving : " Could not save…because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
No other program is even open… I have quit every process I could in the Activity Monitor.
I have tried saving as a different file name and format, I have changed permissions for the Staff option on all of file folders.
I have even completely restarted my computer, but literally nothing has worked.
Help!

No anti-virus software (they cause far more problems than they solve, at least on a semi-secure network), I don't leave Bridge running. iTunes is running, so is InerTrak (time tracking software)... so it has to be Spotlight or Time Machine unless Activity Monitor will lock files. Or it could be Quicksilver, which creates indices like Spotlight.
First thing I'm doing is adding all my hard drives to "Prevent Spotlight from searching these locations" and we'll see if this comes up again.
Could it be the Finder? Does the Finder lock the file while reading the thumbnail?
I'm surprised that there's no way to tell what process has locked the file.
OK, last bit: Why doesn't Photoshop lock the file when it's open so that other programs won't open it?

Issue using Photoshop together with Lightroom - "Could not save because..."

I have a really annoying issue with Lightroom and Photoshop CS3. When I use Photoshop as my external editor for Lightroom, Photoshop opens up nicely and I am able to edit. However when I go to save I get the following message "Could not save because the file is already in use or was left open". The only way I'm able to save then is to shut down Lightroom. Then I can save in Photoshop and after that I launch Lightroom again to continue working in there.
I don't know if this has anything to do with this issue, but I do have all my images on a network drive which I access exactly the same way as any external drive.

Online chat with Adobe staff member helped solve the issue.
A corrupted preferences folder was removed, a new one automatically created solved the issue.
New folder was then deleted and old folder reinstated with the original name (if that makes sense).
Sorted.
THANK YOU Gokul!

Could not complete the paste command because the icc profile is invalid

Hi. In PS CS4 & AI CS4.
I get the following error when I try to copy & paste a logo from Illustrator into Photoshop:
could not complete the paste command because the icc profile is invalid
I don't understand because the color settings are sychronized. I do this all the time. I have not received this error before.
Thanks.

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

"Could not complete the custom command because the ICC profile is invalid"

I got the above message when I attempted to soft-proof an image in Photoshop CC on Windows 7 64-bit.
I had downloaded the ICC profile from drycreekphoto.com, specifically:
http://www.drycreekphoto.com/icc/Profiles/IccFiles/Arizona/Costco-AZ-Tucson-NW-Lus.icc
and installed it by right-clicking on the downloaded file and selecting "Install profile"
Windows installed the profile in the following directory:
C:\Windows\System32\spool\drivers\color
Then in Photoshop CC, I did
View -> Proof setup -> Custom
But when I selected the above profile from the dropdown list, I got error message
"Could not complete the custom command because the ICC profile is invalid"
Does this mean that the profile is really invalid, or am I doing something wrong?
FYI I am new to color management. This was my first attempt to soft proof an image.

I can't quite figure out how it got that way - it has part of an ICC profile structure, but quite a bit wrong. Even debugging tools can't read it as an ICC profile.
It's probably the one file - let drycreek/costco know so they can replace it.

When I try to paste an CCI file into a PSD, I get this message- Could not complete the Paste command because the ICC profile is invalid. I need the layer to be an editable smart object! What's the solution? Ron

When I try to paste an CCI file into a PSD, I get this message… Could not complete the Paste command because the ICC profile is invalid.
I need the layer to be an editable smart object! What's the solution?
Ron

I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
Ron

I can't print a photo because the ICC profile is not installed. What do I do?

I can't print a photo because the ICC profile is not installed. What do I do?

Try from the Editor "Save As"
Then choose jpeg with sRGB profile.

Could not save because the ICC profile description is invalid

Similar Messages

Maybe you are looking for