Could not save the document to the repository for the following reason

Hi,
Some of the Scheduled reports are getting failed because of the following Error.
Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
i have searched about this but no use no information on the same.
So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
Thanks in advance,

HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us

Similar Messages

Please help every time i try to update my iphone it says the iphone could not be restored this device isint eligible for the request build i tryed the hosts thing and the apple thing wasant there please tell me how to do it the terminal way :D

PLEASE HELP PLEASE PLEASE

Did you try the things listed here? Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support Is your device jailbroken? Have you ever used the computer to jailbreak a device? Are you trying to load an iOS other than the current one? What version of iPhone are you using? Is this occurring when attempting to update via iTunes and the computer?

Could not save logon data

Hello,
We want to use the User Mapping System from the portal. For example we want to use Lotus Notes. Therefore we want to map the appropriate Lotus notes user credentials. We tried all the methods. We have allocated an system object/alias for example: CCC Notes Access. We have put in the User credentials after that we pressed the save button we got the error 'could not save logon data'.
Can anyone tell the process how to do..
Thanks
Murali

Hi,
This sometimes occur if the database is not ready to store the value. Make sure appropriate services are started. If not, restart the server and check saving the details.
Regards,
Harini S

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

"could not save as ***.psd because the document is bigger than 2 gb

"could not save as ***.psd because the document is bigger than 2 gb

Yes, that's the maximum for PSD. Save as PSB instead.

Itunes could not save the backup to this computer solved

HI GUYS ANOTHER ISSUE FXED WITH BACKUPS FPR IPHONE 4 IPOD S ETC WINDOWS 7 64 BIT
MY PROBLEM WAS MY ANTIVIRUS AND AS A PAIN YOU HAVE TO UNINSTALL ANY CONFLICTING SOFTWARE
WHEN YOU HAVE DELETED THE ANTIVIRUS (MINE IS BULLGUARD BY THE WAY)
OPEN YOUR C DRIVE
ON ORGANISE GO TO SEARCH OPTIONS
CLICK VIEW
ENABLE HIDDEN FOLDERS
IN C DRIVE
PROGRAM DATA
APPLE
DELETE OR DRAG TO BIN THE LOCKDOWN FOLDER
( YOU COULD ALSO DELETE OR MOVE PREVIOUS BACKUPS IN APP DATA APPLE VOMPUTER MOBILE SYNC BACKUPS )
RESTART ITUNES
AND IT WILL WORK
MANY THANKS FOR READING
AND HOPE THIS HELPS AS IVE LOST HOURS TRYING TO SOLVE IT

HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us

I have PS 6 and just purchased an iMac and am running OS 10.10.1 (Yosemite). When i try to Save or Save As a file I get the following message: Could not save as "Whatever.psd" because this file is locked, you do not have necessary access permissions, or

I have PS 6 and just purchased an iMac and am running OS 10.10.1 (Yosemite). When i try to Save or Save As a file I get the following message: Could not save as "Whatever.psd" because this file is locked, you do not have necessary access permissions, or another program is using the file. Use the Get Info command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder. Any suggestions? Thanks.

Photoshop: Basic Troubleshooting steps to fix most issues
Look under Troubleshoot User Permissions.
Gene

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Photoshop CS3 error saving files - Could not save ... because the fileis already in use or was left

I have a problem with Adobe Photoshop CS3 that only started happening last night. Heres a description of the problem.
When I try and save a Photoshop file, I get the following error message:-
Could not save (filename). because the file is already in use or was left open
I have rebooted my computer, rebooted our server, un-installed & reinstalled Photoshop and also done a system restore, and I still have the problem. (The system restore actually caused huge problems I got the error message The licensing subsystem has failed catastrophically. You must reinstall or call customer support, except I wasnt able to reinstall or uninstall the product. The computer just would not run the installer. I had to undo the system restore.)
I can do Save For Web with no trouble and I can save files to the same location with every other Adobe product installed in the Web bundle, just not Photoshop.
We have 2 machines here with an identical set up (hardware and software) and the problem is only on one machine.
Even though Photoshop says it cant save the file, its actually saving the file in the following format:-
~psX.tmp where X is a random variable, either characters or numbers.
I have to manually open My Documents and rename the file to filename.psd so I can access it again.
Short of reformatting my computer (which Im not keen on doing because it will mean several wasted work hours and I will have to pay our IT people to come in and hook me back up to our network), how can this problem be fixed?
I have also Googled the problem and the only help I found was a suggestion to search for a psicon.dll file and rename it. This file does not appear anywhere on my system, so I'm at a loss.
I have contacted support about this issue, but thought it was also worth while to ask here at the same time.

I'm having similar problems with not being able to save files after editing them (and giving them a new file-name, obviously) in Photoshop Elements 4.0. I get an error message saying (for instance): "Could not save as (whatever I'm trying to name the file) because the file is already in use or was left open". Then I see a .tmp file (that I can't open)
I did a search and found that the file was being saved twice, once within Photoshop (where I'm working with it) and also in..
"C:\Documents and Settings\Owner\My Documents\My Pictures\Temporary"
I'm assuming this is the problem, but if you have any clue as to why is this happening and what I can do about it, I'd welcome any input. I've been using PSE-4.0 for years, and this problem just started cropping up. The only (cumbersome) way around this problem has been to just make my edits (in PSE-4.0) and do a "save" under the original file name, then go into explorer and rename the file. So, in short, I cannot do what I've been doing for years, editing a picture and saving it (renamed) in the sane folder (or a different one).
I can "see" the .tmp files in PSE-4.0, but they won't open.. but they will in JASC.. odd..
Thanks-
Bob

The document could not be saved. There is error reading the document(23).

HI ,
Im getting error : the document could not be saved. There is error reading the document(23).
Had tried de-select "Save As Optimizes for Fast Web View". error still persist.
Pls help. Thanks

Hi,
I am moving your posting at Acrobat.com forum to Acrobat forum.
Hisami

Could not save as - The file may be read-only or is already open in another application

Can anyone think of a reason why if I'm working locally on a CS3 Flash .fla on my C: drive that I would get the error:
Could not save as: C:\Users\John\Desktop\Project_File\ANNUAL REPORT RELEASE\01-19-11\report_stragegy.fla
The file may be read-only or is already open in another application. Save using a different name, or close the document and try again.
I'm running Windows 7 Home Premium 64-bit.
It happens sporadically. I haven't been able to find a reason why this error pops up when saving some of my .fla files!!
The files are not set to "read only" when I right click on them and choose 'Properties' in the Windows 7.
I found some somewhat similar situations with saving errors:
http://board.flashkit.com/board/showthread.php?t=796857
http://forums.adobe.com/message/2980090?tstart=0
http://www.actionscript.org/forums/showthread.php3?t=153738
Thanks

Sometimes I can save with a different file name. But sometimes I can't and start a new blank document and cut and paste from the one that won't save to the new untitled document.

Could not save preferences because the file could not be found (Windows) then Error 1 on PS,AE,PR,ID

I was trying out Photoshop, everything was running fine then one day when I close it I get an error:
"Could not save preferences because the file could not be found..."
Now when I boot it I get the Configuration Error 1.
After Effects still boots, but it reset all my preferences there. For example the workplace layout was reset, all my saved Output presets were removed and my memory-cache and performance settings were reset again.
Premiere and InDesign get the error too and won't boot.
This is the second time it has happened, I'll try wiping every Adobe program and reinstalling all over again, but it had run fine before for a while and it randomly happened.
Any idea how to fix this?

Nope I havent touched the Documents folder.
Forgot to mention that I'm on Windows 7

InD blocking Ps to save a file / Could not save * because the file is already in use error

Many users have reported a Photoshop Could not save * because the file is already in use error in many different circumstances.
I place raw jpgs in InDesign document, then open them in Photoshop via Edit original order to adjust them. On random occasions Ps gives me that annoying error. So i found a little trick to avoid saving that image under a different name and relinking it plus reloading Ps since the error repeats on other pictures to.
All you have to do is: when Ps gives error, (Cmd-Tab) switch to InD, directly select the worked jpg in image frame (one that you try to save in Ps) and simply move it left-right (or move it and Undo). Now you can save it without problem.

JPEG is a "lossy" compression format. Every time you save as jpeg you recompress and throw away a little more information. In addition, jpeg does not support transparency or layers, both very useful features for woring with images. For example, you can add an adjustment layer in Photoshop to do your adjustments non-destructively for may of the things that you can do using Image > Adjustments... which will change your pixel data permanently. Throw away an adjustment layer and you image data is untouched. Also, ID allows you to place a layered image and control layer visibility from within ID, making it possible to multi-purpose a single file by showing or hiding various layers.

"Could not save a copy because the file is already in use..."

I have read previous discussions of this issue, but nobody suggested a solution. Sometimes when I use the Save As command to save an open file with the same name as an existing Photoshop file that is not currently open, I get the dreaded message: "Could not save a copy because the file is already in use or was left open."
When this happens, I have to save my open file using a different filename, then change the name in the Finder after manually deleting the original file with that name. This happened occasionally in Photoshop CS3, and is now happening more frequently in CS4. If no one can offer a solution, can someone please tell me if there is a way to officially submit a bug report? The simple truth is that Photoshop costs way too much for a well-known problem like this one to be hanging around version after version. Adobe really needs to fix this and I'd like to tell them so. Thanks!

alansky1 wrote:
Adobe really needs to fix this and I'd like to tell them so.
I've run into this and I'm convinced it's not Adobe. Whenever I've gotten around the problem it's often something from Apple that got in the way.
I use a simple workaround when Finder/QuickLook isn't letting go of the file. First use a free utility like TinkerTool or Onyx to turn on the Quit command in the Finder. Whenever the Finder gives you trouble, if closing the Finder window in question doesn't solve it, just do the ol' Command-Q. It's a little faster (and maybe safer?) than force-relaunching the Finder. This usually releases files for me when all else fails; it also often cures the annoying "can't eject the volume because it's in use" messages when you've already quit every program you can find.
There's the question of why Photoshop and not others; I'm not an engineer but I think the sheer size of Photoshop files is a factor. In one instance I noticed that quicklookd was using a lot of RAM, and QuickLook has been implicated by an earlier post in this thread. It isn't unusual for a Photoshop file to be very large compared to other types of documents. It's possible that when QuickLook hits a large Photoshop file, and it does its normal thing of generating a big preview for it, it could get tied up reading that huge image long enough to block another program. Sometimes it seems like QuickLook just hangs on them. When it happens, you can try looking at Activity Monitor to see if something like QuickLook, Spotlight, or some other program is using an unusual amount of CPU or RAM.
Apple Mail (at least in 10.5) is another major offender by the way. If you attach a file to Apple Mail it will hang on to it as "open" even after you remove the attachment. Other programs will not be able to write to the file that was attached or formerly attached. Nothing short of quitting Apple Mail will make it let go of the file. You'll notice it when you delete a JPEG, PDF, Word doc (definitely not just Photoshop) attachment because you realize you need to make a change and attach it again. Attempting to export an updated one over the old one is blocked until Apple Mail is quit.
In my experience I think what Chris says is true.

"Could not save (file name) because the file is already in use or left open."

Hello,
When I tried save as a file, I get an error msg:
"Could not save (file name) because the file is already in use or left open."
The file is not open anywhere accept Photoshop.
Mac Pro, OSX 10.5.6
Photoshop CS4.
I searched the forum but could not find anything even though i'm sure someone already asked it.
would love to get a solution for that.
thank you,
shlomit

There is a problem with both Photoshop and InDesign, then we can blame wich ever it is.
1. I open a .psd file in Photoshop CS4 by double clicking it in Bridge
2. This image is placed on a page in a open InDesign document.
3. Doing some changes in Photoshop on the image.
4. Trying to save and get this error message (this topics subject)
5. Deleting the image from the page in ID doc, it is the only one in the document.
6. Can't still save file.
7. Closing ID completely and now I am able to save the file.
I tried turning of Live preflight in Indegisn but that didn't help.
So probably the fault is InDesign or the MacOS. I didn't have this problem with CS3. It is a stupid problem because this type of workflow is pretty common and one would expect it to be solved by now.
Jan Suhr
Stockholm, Sweden

Could not save the document to the repository for the following reason

Similar Messages

Maybe you are looking for