Could not schedule jobs from DB13

Hi Experts,
yesterday we have changed the file permission in /oracle/<SID>/102_64 mount point in our production system.
After changing i could not schedule any jobs from DB13 and i could not use <sidadm> user for taking the backup from sap.
Now i am taking the backup through OS and Archive log copying also OS level.
I have given the below command for changing the file permission.
chmod -R 777 /oracle/TPR/102_64
I think we changed the whole permission under the oracle/SID/102_64 mount point. its changing the full permission for Oracle related files.
How i can revoke the same?
Kindly advice.
Regards,
Sundar.C

Hi,
Please check you are able to run the backup from Brtools at os level.
If yes then check the permission of the files in the sapmnt/SID/exe as mentioned below.
-rwxr-xr-x   1 <SID>adm     sapsys     9652136 brrecover
-rwxr-xr-x   1 <SID>adm     sapsys     3403504 brrestore
-rwxr-xr-x   1 <SID>adm     sapsys     12771456 brspace
-rwsrwxr-x   1 ora<SID>     dba        4962288 brtools
-rwsrwxr-x   1 ora<SID>     dba        8910816 brarchive
-rwsrwxr-x   1 ora<SID>     dba        9282832 brbackup
-rwsrwxr-x   1 ora<SID>     dba        12419824 brconnect
If you are not able to fire the backup from Brtools.
then you need to get the file system restored as you change the permission of all the files by doing the chmod -R.
or
you can compare the permission with another sap server of same database and same patch level and then change the permission manually of all the directoried and files.
did you stop the dtabase and then did the permission change if no then restart the server .it may be possible thet your database shall not come up.
thanks
Rishi Abrol

Similar Messages

What command will be executed when I schedule job via DB13

Hi all,
How do I get what command(full syntax) will be executed when I schedule jobs via DB13?
For example:
- Action: REORG of Tables in Tablespace(s)
- Tablespaces: "WI6#BTABD" is selected
- "Use Temporary Tablespaces" is selected
I think this is a really basic question...
Could you give me some advice?
Thanks in advance,
Ikue

Hi Ikue,
yes, you won't see, what the 'REORG for all tablespaces is doing. But it's not really necessary. Its's simply always the same call
REORG TABLE <tabname> INDEX <primary key> ALLOW NO ACCESS
and optionally the addition USE <tempspace>, if you have selected this option in DB13. And it is called for each table that is located in the tablespace(s) which you have specified.
The 'REORG for set of tables' is quite new. It is available with Basis Support Package 7.0 SP12. Before there was only a job to Reorg a single table.
The REORG for flagged tables is a deprecated job.
If you want to know more about the various REORG jobs and when and how to use them, then you should look at note 431430
Best regards
Ralf

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

Disk could not be read from or written to

I'm a new ipod user. I can get songs on my ipod. But when I go to get photos I get an error message saying, "ipod cannot be updated. The disk could not be read from or written to."
In itunes I can see the ipod. When I go to look at My Computer, it does not show the ipod as a disk drive.
Thanks!

I'm a new ipod user. I can get songs on my ipod.
But when I go to get photos I get an error message
saying, "ipod cannot be updated. The disk could not
be read from or written to."
In itunes I can see the ipod. When I go to look at My
Computer, it does not show the ipod as a disk drive.
Thanks!
It's so simple, dont worry. Just connect your ipod to the computer. iTunes must open. In iTunes clcik on the small ipod icon which appears at the right bottom of the itunes window. click on that icon and another window with some options will be opened. Click on "enable disk use" and make this selection marked and click ok.
it'll certainly help!

Disk could not be read from

Suddenly my Ipod will not sync. The error message says "...disk could not be read from or written to..." We tried the HOLD TOGGELING. But that didn't work. It won't let me restore the Ipod either because it says other programs are currently in use.
Suggestions would be greatful!

Welcome to the discussions,
if the reset did not work, did you try to put it into disk mode? http://support.apple.com/kb/HT1363

Error Message: "Disk could not be read from or written to".

New 5th Gen. was downloading CD's I loaded into iTunes just fine; when uploading tunes into iPod yesterday this error message appeared: "Attempting to copy to the disk (iPod name) failed. Disk could not be read from or written to". Restored iPod with 1/10/06 update of iPod Install; using iTunes 6.0.2; operating system 10.3.9. Frustrated. iPod useless at this point. Anyone found a fix to this vexing problem?
Thanks,
John

Thanks Jeff. Only thing that rings true is updating OS; when I tried to downoad 10.4 message said I 'could not on this computer'. Since I purchased and installed 10.3 a year ago I don't understand. Also, iPod was downloading perfectly until two days ago when -36 appeared. Bummer. I am not a techie, Apple tech support does not have a clue, and iPod is useless. Ideas?

"The disk could not be read from or written to"??

When I try to sync my ipod it gives me following error message "Attempting to copy to the disk 'My Ipod' failed. The disk could not be read from or written to."
Have not reset or restored it yet, wondering if there is anything I can do that doesn't involve me deleting all the songs on my ipod.
5th Gen 80g Ipod, G5 Imac Mac OS X (10.4.9)

See if this troubleshooting article helps.
Disk cannot be read from or written to error syncing iPod in iTunes.

Attempting to copy to the disk Ipod failed. the disk could not be read from

Keep getting error message Attempting to copy to the disk.....Ipod failed. The disk could not be read from or written to. I can copy to Ipod from my laptop however, can not sync with my G-4 tower. I keep my library on an external HD Lacie d2. I've tried all the possibilities from the support page to no avail.. Need help... When error refers to disk is it referring to my external HD

Hi c2xist,
And you did follow all of the suggestions from this article?:
"Disk cannot be read from or written to" when syncing iPod
Also, you could go through these iPod troubleshooting steps, and see if they are of any help:
The Five Rs
-Kylene

9.1.1 sync problems: "The disk could not be read from or written to."

Using OSX 10.6.3 and upgraded to iTunes 9.1.1. Once I did, I keep getting the following error message: "Attempting to copy to the disk [my ipod] failed. The disk could not be read from or written to." This is followed by another error message: "iTunes could not copy {name of file} to the iPod {iPod name} because the file could not be read or written."
I tried deleting the files mentioned in the error message, but then the message returns with the name of a different file. At this rate, I'll be deleting all my files!
I tried checking everything on the Knowledge Base article: http://support.apple.com/kb/HT1207
I tried restoring my iPod (twice), but it didn't help.
All my software is up to date. I haven't added any new software since I upgraded iTunes.
NOW...when I try to sync my iPhone, I get the same error message.
What's going on, and can anyone help?
This is very annoying since I can't sync my iPhone which I need or my iPod which I would like.

ArizonaDAK wrote:
"iTunes could not copy {name of file} to the iPod {iPod name} because the file could not be read or written."
check if you have read & write permissions for your iTunes music folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. next, click on the little gear-shaped icon and +apply to enclosed items+ like so
you may also give everyone read & write access. if this doesn't help, try the same on your iTunes folder (not just the iTunes music folder).
if that make no difference, try reinstalling iTunes. click here and follow the instructions. next, download a fresh copy from here: http://www.apple.com/itunes/download/.
you might also try to _*remove and reinstall the Apple Mobile Device Service*_
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Error when syncing iPod: The disk could not be read from or written to!!

I have an iPod mini which worked fine on my Windows XP.
Recently got Windows Vista and I downloaded iTunes and my put my music in the library.
When I plugged my iPod into the Vista, it said it was syncing all the songs to my iPod.
After about 3 hours, whilst syncing the last song a notice came up saying, 'Attempting to copy to the disk failed. The disk could not be read from or written to.'
I restored my iPod and reinstalled iTunes but the same thing happend.
I decided to plug my iPod back into the Windows XP, where I've had no problems. When I did this and started snycing all the songs, I got the notice come up again.
'Attempting to copy to the disk failed. The disk could not be read from or written to.'
I haven't been able to use my iPod now for about 5 weeks because I cannot solve the problem so any help will be much appreciated!
Thanks

You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800

Error:the ipod cannot be updated. the disc could not be read from or writte

May sound silly I am sorry, new to this. Just got an ipod shuffle and have gone through all troubleshooting suggestions ie: restore ipod, reinstall software etc. Am getting an error: "The ipod "administrator's ipod" cannot be updated. The disc could not be read from or written to". This occurs when I click and drag a playlist from the source section to my ipod in the source section. Getting a wee bit discouraged by reading all the problems associated with this ipod and am hoping for an easy fix to slide past further frustration. Please help. Thank you muchly.
Windows XP

Go to the iPod Shuffle Support Page, look around in there, and follow the troubleshooting steps in the article entitled "Can't be written to" or words to that effect.

2G Shuffle error "disk could not be read from or written to"

Just recieved a 2G as a gift. First sync went fine. Songs transferred without issue. Wanted to change some settings and re-sync with new songs and got the error message "disk could not be read from or written to".
Have tried on an XP64 and a Windows 2000 machine with same error. I can sync from an XP Pro Laptop fine. All three are using the same driver (USBSTOR.sys).
Need some help trouble shooting this issue. The XP64 is my main computer and is the one I would like to solve this issue on. I also have a 30GB iPod that syncs on the XP64 machine with no problems.

I don't think the Apple store folks will be able to do anything because the issue is not with every computer.
The fact that I have a computer that can sync with the Shuffle without errors tells me there is an issue with the other 2 machines. As I cannot use the Laptop as my primary library I would like to solve the issue.
I still suspect either iTunes itself or the driver. If anyone else has any suggestions please share them.

The ipod cannot be updated. The disk could not be read from.

The ipod cannot be updated. The disk could not be read from or written to.
This message appears every time I try and update my ipod or put photos on. I also get this message:
An error occured while updating the default player for audio file types. You do not have enough access privileges for this operation.
WHAT DO I DO???????

Perhaps check for corrupted files--I had this issue with a messed up track/ file, and that kept killing the sync. More here:
Lost in Asia, "Disk Could Not Be Read From or Written To." #12, 03:32am Oct 15, 2005 CDT
As for the access privileges part, well, sorry, I have absolutely no idea what that means.
Good luck!

Please help! iPod won't sync: "Disk could not be read from or written to."

I am at the end of my rope with the endless problems I've been having with iTunes and my iPod ever since the iTunes update which included Gapless Playback (a feature which now invariably crashes my entire computer unless I disable it quickly enough). My latest problem has now made my iPod completely useless because I cannot sync it with my music library. Every time it tries to update the songs, it either crashes or I get the error message "Disk could not be read from or written to." I have tried restoring my iPod, which seemed to work, except that after the restore function seemingly completed I still have the flashing Do Not Disconnect screen on my iPod (after about 30 minutes). I already tried synching my iPod while this was going on and I got the same disk error message. Please, please, can anyone tell me what on earth is going on? I've NEVER had problems like this and all of a sudden it seems like everything about iTunes is a complete disaster.

I had the same problem after I moved my library from my PC to my new iMac. It would not sync properly. After a day of thinking about it, researching it, and trying things like starring at the screen to see what song it failed on as it ran the auto sync (a suggestion posted on this site), a light bulb went off. Switch it to manual! If you manually manage the songs that sync it is easy to discover what songs fail. When auto sync is managing it, it jumps all over the place when synchronizing, but if you manually grab say 500 +/- songs at a time, it goes in alphabetical order, and you can see where it fails. It will be the track(s) immediately following the the last track that made it on the iPod. The songs that were corrupted for me played fine in iTunes, but would not transfer to the iPod, and they worked when I was syncing with my PC. Hmmm? I hope this helps.

Could not schedule jobs from DB13

Similar Messages

Maybe you are looking for