Could Not See WVC54GCA Camera Remotely,

Connected WVC54GCA with WRT160N Router and registered in TZO for DDNS Support ,Configured and created domain name satishhouse.linksys-cam.com
Port Forward in the Linksys WRT160N Router is completed
In the WRT160N Setup page ,DDNS setup ,i see the status as operation complete ,is the status mean that it is Valid DDNS or what?
WVC54CA Setup is configured to domain Name and TZO Key
Kindly help me to configure the camera remotely
Thanks and Regards
Satish

Who is your ISP?
When you made the TZO settings on your Camera have you opened the Ports on your Camera as well as on your Router. You need to open the Port 1024 and 80 pointing towards the Camera IP address.

Similar Messages

Could not complete the camera raw command because of disk error

Hi,
First off, I am using a Mac (OS X ver. 10.9.2) and Adobe Creative Cloud Photoshop (2014). I just downloaded the preset pack off VSCO for Adobe Camera RAW and I am having trouble getting it to work.
When I try to launch the "Camera Raw Filter", I get the message 'Could not complete the Camera Raw Filter command because of a disk error.' (this also happens sometimes when i try to import the RAW files into photoshop...I don't know if it's the way i'm importing them or what...?)
I've tried uninstalling and re-installing photoshop cc several times and restarting my computer and have searched online but cannot find anything at all to help me (or i just don't understand, urgh).
Please help!

I'm getting same error and I think it's related to Adobe Camera Raw. I see several manifestations of this problem:
1) Open a RAW file (.NEF) directly using Photoshop CC 2014 - I get an error "Could not complete your request because of a disk error."
2) In Photoshop CC 2014. I go to Filter > Camera Raw Filter - I get an error "Could not complete the Camera Raw Filter command because of a disk error."
I can do the following successfully:
1) Open and edit a RAW file successfully in Lightroom 5.7
2) Open a RAW file successfully in Photoshop from Lightroom 5.7 (when I do an "Edit in Photoshop CC 2014" from Lightroom 5.7)
I was previously on LR3 and Photoshop CS5 on Mac OSX 10.6.8 (Snow Leopard) and bought an upgraded MacBook Pro last week.
My upgraded system is now:
Mac OSX 10.10.1 (Yosemite)
Photoshop CC 2014
Lightroom 5.7
I've uninstalled / reinstalled Photoshop and Lightroom numerous times and the problem still occurs.
Anyone else having the same problem?

"could not start the camera. Close other apps and try again"

It shows up saying could not start the camera. Close other apps and try again when i try to open the camera but no other apps are open.
how do i fix this?

Hi.....i am new here and is not sure as yet how to start a new thread.
I have a bb curve 8310 and think i may ave caused my camera to stop working via uninstalling it....if that is possible.
wen i click on di camera it opens, makes shutter sound and flashes wen i click di trackball but after that it doesnt show di picture that it supposedlt took.
Before this happened i was foolin around with the hide a folder option in pictures and not sure what i did wrong.......my video is not clear either.....please can you help me .....in addition i do not get any of those messages that i see the other users saying that they got for example could not start camera....i am not getting anything like that. all dat i get is a white screen......

IPhoto does not see my camera

iPhoto '09 did see my new Panasonic camera at first, and I could import the images and videos without any issues.
Now - a day later - there is some images and movies on my camera's SDHC card, and it does not see the camera at all. I do see the camera card in the finder. So the card is readable. It is just that all of sudden iPhoto does not see it anymore. I tried hence and forth restarting iPhoto and camera but no luck.
The only thing I did in between was loading of a bunch of images from my camera card (via Camera Connector Kit) to my iPad 3. And removing the images (the iPad 3 does not seem to recognize the videos - which is another issue...) via the Photo app on iPad. I then wanted to load the videos (and some new images I tookl direcfly to iPhoto on my iMac. But htat now does not seem to work.
Any tips are much appreciated!

Try these:
1) Go to Disk Utilities and repair permission -- see if it works. If not go to #2
2) If that doesn't work d/l a program call OnyX. Make sure you get the the specific version for the version of OS X you are running. Run the program and go to Maintenance and run all three options Permissions (reset home directory checked), Scripts (run all, but don't delete logs), and rebuild (check LaunchServices and dyld's shared cache). Then go to Cleaning. In System check Kernal and Extentions and Other components. In User make sure at least Applications and Temporary items are checked. You can check the others if you want - no harm will come, just more time. You will be asked to restart your computer each time, but ignore until you have reached this point. When you have done all of the above reboot
Test again. Your camera shoud show up.

Could not see the data in the cube

Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.

Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.

Inline item mx:Image ... in mx:itemRenderer could not see the defination of method

I have following code and got a compilation error ("possiblely called an undefined function") because the <mx:Image ...> in the <mx:itemRenderer > could not see the defination of "aMethod" method:
<mx:Form ....>
<mx:Script><![CDATA[
private function aMethod(evt:Event):void {
           // code...
]]></mx:Script>
<mx:Canvas label="Tile View" width="100%" height="100%" >
          <mx:TileList id="photosTileList" dataProvider="{this.photoDP}" width="100%" height="100%" >
                    <mx:itemRenderer >
                        <mx:Component>
                            <mx:Image horizontalAlign="center" source="{data.url.text()}"
                                toolTip="{data.caption.text()}" width="55" height="38" complete="aMethod(event)"/> 
                        </mx:Component>
                    </mx:itemRenderer>
         </mx:TileList>
         <mx:Image .... complete="aMethod(event)"/> 
</mx:Canvas>
</mx:Form>
I do not know why the inline <mx:Image> inside <mx:itemRenderer> can not see the "aMethod" function defination in the same mxml file.
Any suggestions?

You need outerDocument, and the method cannot be private, it should be public:
complete="outerDocument.aMethod(event)"
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Could not start the camera

When trying to start the camera I get this message..Could not start the camera. Close other applications and try opening the camera again.
I have nothing else running other than the phone itself waiting for a call. I can not find anything on Blackberry support for this issue unless I am missing it.
When I first got the phone a couple of months ago it worked fine and I could send pictures, now it is stuck.
Thanks for any help.
CB
Solved!
Go to Solution.

Some say that removing the battery cover and pushing down around the camera lens will solve this problem. Apparently, it's a hardware issue. If it keeps up, you will likely need a replacement device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

I could not see photos after updated with ios 6(used wi-fi)

I have upgraded with ios 6 on 21-Sep-2012, after that I could not see my photos on my phone 4.
I used apple id for icould buy not able to verify.
thanks,
umapathi

Same issue. But my iPhone 4 does it as well. Only thing is with my iPhone it maintains a persistent 3G connection so at least I'm getting my messages as they arrive. But if I relied solely on WiFi and my device was in sleep mode, I wouldn't get any notifications.
On my iPad 2 I've tried forgetting the network, renew lease, rebooted, airplane mode etc. Nothing works.
It's not crippling my device but it's really annoying and it's not the way it should behave.

Downloaded ios8 to ipad mini and know I do not see my camera icon

DDownloaded ios8 to iPad mini and now i do not see my camera icon

It should be on the top row. If not go to settings> general> restrictions> camera and make sure the button is green.

Manager could not see employee's data on MSS

Hello Experts,
One the Manager could not see employee's data on MSS (in iview). Only employee names appearing but not the other details.
We have checked and debugged, the data is populating in the backend but on portal its only displaying employee names.
We have checked the configuration, roles and it is also looking fine. Not sure why it is not displaying data on portal.
Please help. Thank you.
Regards
Saurabh

First off I want to thank you Siddharth for all your responses. Ultimately, your responses helped me get on the right path for resolving this issue.
I ended up taking this into debug and finding out specifically why these absences did not appear on the team calendar. I'd like to begin by indicating, in my opinion, this is a bug/programming flaw.
Within IF_EX_PT_ABS_REQ~AUTH_CHECK_AND_ANONYMIZE_DATA there was a check to determine if the rule group had the IT2001/2002 Authorization Check section, Employees: Deactivate Authorization Check and Managers: Deactivate Authorization Check boxes checked. For 1 out of the 3 rule groups configured, one group did not have those boxes checked, while the other two did.
What happened, is when the program built it's list of PERNA's that report directly to this manager, the first person in the list happened to be in the rule group that did not have the Deactivate Authorization boxes checked. However, the remaining PERNA's in the list were in another rule group that did have the Deactivate Authorization boxes checked. Based on my interpretation, the team calendar should have ommitted the absences of the one person, but should have displayed the absences for everyone else in the separate rule group. The code only reads what rule group the first PERNA in the list is and applies that MSS_NO_AUTHCHECK value to all the other PERNA's in the list.
Either the code should do a MSS_NO_AUTHCHECK lookup on every PERNA on the list or should check what rule group the approver/manager is in and apply it to all his employees.
Game - Set - Match.......

CURVE 8300 Could not start the camera

We I try to used the camera it gave me a error mesaje "Could not start the camera. Close other applications and try openning the camera again"
Message Edited by jalfaro on 04-22-2008 03:52 PM

I have this EXACT problem with my 8310 Curve too! I've tried removing the battery and rebooting too, but it still does it!
Message Edited by iamosolo on 04-22-2008 03:37 PM

8350i Could not start the camera

When trying to use the camera on the new 8350i, I get an error message indicating "Could not start the camera. Close other applications and try opening the camera again", even if all of the other apps are closed.
Ideas ???
Solved!
Go to Solution.

Reset the device taking out the battery for 30 seconds, and install it again.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Could not see SH schema details in AWM 11g.

Hi all,
I have installed oracle db 11g (11.1.0.6) and installed awm 11.1.0.7.
I am trying to open db instance in AWM by SH Schma, but i could not see the dimensions which already in place (as this is oracle defined sample schema). What could be done to see the details of schema.
regards
chandra kanth.

AWM allows you to connect to the database in two modes: 10g and 11g. In 10g mode you will see only the 10g style AWs, and in 11g mode you will see only 11g style AWs. I don't know which version of the SH AW you have, but it is worth trying both connection modes. You will see the option ("Cube Type") in the dialog where you enter the password.
More generally you should upgrade your database instance to 11.1.0.7 at the least if you are planning to use OLAP, and there are recommended OLAP patches to be applied on top of that. See the following certification page for details.
http://www.oracle.com/technetwork/database/options/olap/olap-certification-092987.html

Could Not See WVC54GCA Camera Remotely,

Similar Messages

Maybe you are looking for