"Could not start the linksys updater service" error message

I purchased a WRT160N router and everything worked fine for a while. After a few days, I would lose the wireless connection. I spoke to the geeks at Best Buy, and they said the unit was probably bad, so I exchanged it for a new one.
Before setting up the new one, I figured I'd uninstall the Linksys EasyLink Advisor software in case the new router had a different version. I then started to install the software. But now the installation fails with error message "Could not start the Linksys Updater Service". I tried manually starting it, but it aborts with an error message "The process terminated unexpectedly" .
Does anyone have any suggestions what I should do now? 

Well if you are trying to setup your router using the setup disk, you can exit from the setup and configure all the settings on your Router Manually.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Similar Messages

  • Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

    Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
    It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming: 
    Windows could not start the FLEXnet Licensing Service service on Local Computer
    Error 1068: The dependency service or group failed to start.
    I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service. 
    Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

    Hi Don1233,
    Please consider seek help at the software vendor side.
    For the services didn't start, follow the suggestions posted by Elton in the thread below:
    https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
    Best regards
    Michael Shao
    TechNet Community Support

  • "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

    Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
    After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
    "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
    Before the upgrade, offline files worked fine... how do I re-enable offline files?

      I had a similar issue -  couldn't make any files available offline.
    I found that the offline folder service would not start
    This was because the CSC permission were totally screwed.  I had to take ownership of each folder and file, one by one, then grant everyone full access.
    then delete the full contents of the CSC folder
    format the CSC database using the registry fix then reboot
    in control panel, disable the offline files,  reboot, then re-enable.  and now its working :)
    2hrs to resolve this, with grateful thanks to this thread and some others.
    damn windows8

  • Windows could not start the DHCP Client service on Local Computer, Error 2

    Hi everyone,
    I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
    service on Local Computer." "Error 2: The system cannot find the file specified.".
    There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
    "sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
    "NET  LOCALGROUP   administrators  "NT Authority\Local Service"   /add"
    "netsh winsock reset catalog"
    I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
    SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.

    Hi,
    Did you mean after the restart the sfc /scannow command still could find the corrupted files?
    Have you check this these related registry entries permission for your account?
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
    permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
    permission needed: Full Control, Read
    for more information, read this article:
    Some services do not start in Windows Vista and Windows 7
    https://support.microsoft.com/kb/943996?wa=wsignin1.0
    If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
    Karen Hu
    TechNet Community Support

  • Windows could not start the Windows Audio service on Local Computer.

    Hi
    I started my PC today and i didn't have sound... weird
    i'm getting this error when i want to start the Windows Audio service
    "Windows could not start the Windows  Audio service on Local Computer.      
    Error 0x800706cc: The end point is a duplicate."
    HELP PLEASE!!!!!

    Hi,
    Have your gotten any updates installed?
    Regarding to current information, this issue can be caused by corrupted updated files or drivers.
    Please check if there is any update related to audio driver. Can this issue be fixed if you remove such update?
    I also suggest you can try to reinstall Audio driver to check the results.
    Kate Li
    TechNet Community Support

  • Urgent: Could not start the Web Analysis services

    Hello Experts,
    I am having issues when starting Web Analysis Services. Could not start the Web Analysis services
    starting weblogic with Java version:
    java version "1.5.0.07"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.07-_20_mar_2007_05_31)
    Java HotSpot(TM) Server VM (build 1.5.0.07 jinteg:03.20.07-11:05 IA64, mixed mode)
    Starting WLS with line:
    /opt/java1.5/bin/java -server -Xms256m -Xmx512m -XX:MaxPermSize=128m -Dhyperion.home=/hyphome/Hyperion -DESS_ES_HOME=/hyphome/Hyperion/BIPlus/appsinfo/WebAnalysis/EssbaseJAPI -Datf.session.binding.kill-with-prejudice=true -Dweblogic.j2ee.application.tmpDir=/var/tmp/hyperion -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -da -Dplatform.home=/hyphome/bea/weblogic91 -Dwls.home=/hyphome/bea/weblogic91/server -Dwli.home=/hyphome/bea/weblogic91/integration -Dweblogic.management.discover=false -Dweblogic.management.server=http://localhost:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/hyphome/bea/patch_weblogic910/profiles/default/sysext_manifest_classpath -Dweblogic.Name=WebAnalysis -Djava.security.policy=/hyphome/bea/weblogic91/server/lib/weblogic.policy weblogic.Server
    <Jan 6, 2010 12:28:36 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.5.0.07 jinteg:03.20.07-11:05 IA64 from Hewlett-Packard Company>
    <Jan 6, 2010 12:28:37 PM IST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.management.ManagementException: Unable to obtain lock on /hyphome/Hyperion/deployments/WebLogic9/./servers/WebAnalysis/tmp/WebAnalysis.lok. Server may already be running
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:59)
    at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:82)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:365)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:116)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:630)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:402)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
    at weblogic.Server.main(Server.java:67)
    >
    <Jan 6, 2010 12:28:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Jan 6, 2010 12:28:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Jan 6, 2010 12:28:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Any suggestions would be of great help. Thanks in advance.
    Regards,
    Sudhir
    Edited by: 637223 on Jan 6, 2010 1:54 PM

    Are you sure there is not another web analysis web application process running, have you checked the processes running on the machine, you may have to kill or stop one of them to release the lock.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Could not start the Hyperion Shared Services and hypservice service termi..

    Hi,
    I have to small issues on my Windows 2003 Server Service Pack 2.
    1. Error 1053 Could not start the Hyperion Shared Services
    2. The Hyperion S9 BI+ Analytic Services 9.3.1 - hypservice service terminated unexpectedly. It has done this 1 time(s).
    Has anyone encountered them before and an idea how to fix these errors?
    Furthermore, when I start my Administration Service Console and try to Login Oracle Hyperion 9.3.1 tells me "Could not connect to Administration Server".
    Is this related to my two errors?
    Thanks,
    metalray

    Yes, you are right, that showed me the next* error:
    When I run the essbase agent (essbase.exe) it shows me
    Error(1051518)
    Analytical Services global application does not exist at Shared Services
    I did all the configuration and deregistration (all green lights now)
    *hope I am on the path to enlightenment here                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Could not start the oracle orcl service on local computer 1053

    I ve oracle 8i with Windows XP ,when I try to start it manually also it show ing the 1053 could not start the oracle orcl service on local computer 1053 what should i do?
    Thanks
    [email protected]

    go to oarcle service
    click the service
    choose logon
    click the boutton
    local system. now try start service

  • TS1567 its denied, it says that "windows could not start the apple mobile service on Local Computer"?

    its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?

    http://support.apple.com/kb/TS1567

  • Could not start the Oracle Agent service on local computer

    I have Oracle Enterprise 9.2.0.1 on Windows 2000 server,
    When I'm starting the Agent service I get this message:
    "Could not start the OracleOra9201Agent service on local computer.
    The service didn't return an error.This could be an internal Windows error or an internal service error. If the problem persists, contact your system administrator."
    Could you please help me to fix this problem? What I should do??

    Are you using DHCP or using static IP address?
    Also search forum , you ight get lots of thread addressing same issue.

  • Windows could not start the windows deployment services server Error 1067: The Process terminated unexpectedly - Please help

    Hello All
    I am trying to set up a PXE service point on my DP in SCCM 2012 R2
    1) I have enabled the role on the DP
    2) rebooted and verified WDS installed as a role.( I let SCCM enable this role as instructed)
    3) When I tried to start the role from services I get the error below:
    Note: I also followed the troubleshooting steps in this technet article but still it stops at the half way point
    http://support.microsoft.com/kb/2009647/en-us
    Phil Balderos

    Hi,
    Here is a similar post for your reference.
    Windows Deployment Service
    http://www.windows-noob.com/forums/index.php?/topic/3938-windows-deployment-service/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows could not start the Network Location Awareness service on Local computer

    i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying  "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
    i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
    what might i have done to make this happen and what can i do to try to fix it?
    haus

    Hi,
    Thank you for the post.
    I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
    1.    Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
    For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
    2.    If the issue persists, please check the system file by using the command SFC /scannow.
    For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
    If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
    To obtain the phone numbers for specific technology request, please check the website listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
    Thank you for your understanding.
    Sincerely,
    Joson Zhou
    Microsoft Online Community Support

  • Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

    Dear Technet,
    Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
    My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
    even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
    Help me please.. thank you.
    Regards
    Shamil

    Hi,
    Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
    The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
    of the local Administrators group.
    If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
    user right.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows could not start the Server service on local computer Error 193:0xc1

    Hello,
    Not able to start Server (lanmanServer) Service in Windows Server 2008 R2 
    Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
    If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
    All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
    on checking the event log its shows an error "Server is not a valid win32 application"
    Please help
    Thanks and Regards
    Jose

    Hi,
    Thanks for posting your question in the forum.
    I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
    below you created in the forum. Thanks for your understanding.
    http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1

    I have got installed Oracle Apps R 12 on my laptop. The system is running with Windows 2000 server. All went well till the time there were prop.er shusttdown of machine. The ConcMgr service stopped working when the system was turned off due to power down. First time when it happned i could got it work by installing the software agin. However it is become laborious every time to follow the same. Can any one has solution for this issue? I would appriciate your reply.
    i spent 4 hrs on web for solution but no luck.
    the following is the error
    Services
    Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.
    OK
    ---------------------------

    Please run AutoConfig and make sure it completes successfully and try then.
    Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.Please check the CM log file as well as the event viewer for details about the error.
    Thanks,
    Hussein

Maybe you are looking for