Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1

I have got installed Oracle Apps R 12 on my laptop. The system is running with Windows 2000 server. All went well till the time there were prop.er shusttdown of machine. The ConcMgr service stopped working when the system was turned off due to power down. First time when it happned i could got it work by installing the software agin. However it is become laborious every time to follow the same. Can any one has solution for this issue? I would appriciate your reply.
i spent 4 hrs on web for solution but no luck.
the following is the error
Services
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.
OK
---------------------------

Please run AutoConfig and make sure it completes successfully and try then.
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.Please check the CM log file as well as the event viewer for details about the error.
Thanks,
Hussein

Similar Messages

Windows could not start the Server service on local computer Error 193:0xc1

Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose

Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Could not start the oracle service on local computer

Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
Fergus

To start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts

Could not start the TNSListener service on Local Computer

I installed Oracle 10g rel 2 under Windows 2000. The computer is DHCP, so I installed the MS loop adapter, and am able to successfully the new IP address.
SQL*Plus returns this error:
ORA-12541: TNS:no listener
When I try to start the listener via control panel > services, I get this Microsoft Management Console error:
Could not start the OracleOraDb10g_home1TNSListener service on Local Computer. The service did not return an error. This could be an internal Windows error or an internal service error. If the problem persists, contact your system administrator.
My full computer name (via control panel) is dimension4100.ora.newmiddleclass.com and it is a member of workgroup WORKGROUP.
C:\WINNT\system32\drivers\etc\hosts contains (I added the 2nd line):
127.0.0.1 localhost
192.168.255.255 dimension4100.ora.newmiddleclass.com dimension4100
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
My SID is HCM.
Can someone please suggest a solution? Thanks.

That helped somewhat... now I am able to start the listener. However, SQP*Plus now says:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor.
My tnsnames.ora now looks like this:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dimension4100.ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.dimension4100.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I'm using dimension4100 for the SQL*Plus Host String in the login window.

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows could not start the remote services on local computer

windows could not start the remote services on local computer
1075: the dependency service does not exist or has been marked for deletion

Hi,
On which system you are facing this issue?
Can you ping to the remote system\server successfully?
Initially it seems that this occur due to services issue on system. Might possible that the remote Services component is not installed or is disabled. For that you can add the remote Services component by using the Add/Remove Programs tool in Control Panel
before attempting to start the service. If the service is already installed then check whether it is started properly. Additional check the relayed service for Remote and verify.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When I open Itunes it says,Windows could not start the bonjour service on local computer.

Just recently, I had a problem with the AVFoundation thing on my computer. Well I got that fixed, but now it has a message coming up that says " Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
Please tell me how to fix it.

Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
That's an unfamiliar one, steve.
Let's see what happens if we try to start the service manually.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications"
Open "Services". (Perhaps maximise the Window to better see what's going on.)
Select the Bonjour Service and click "Start".
Do you get an error message then? If so, what does that one say?

Could not Start MaxDB: MDM Service on Local Computer

Hi,
I install the MaxDB to use the MDM software on to my PC. Its sucesfully completed. I uploaded the some of the repository and worked fine some 4 days.
Now my Database instance(MDM) is not at all started and If i check the status of this service in Control Panel->Administrative Tools, Showing as "Starting". It is never end and getting the error as
"Could not Start MaxDB: MDM Service on Local Computer" .
**Here MDM is the Database Instance name in my system.
Please Suggeme How to come out of this problem. Even i not able to uninstall the MaxDB.
Many Thanks in Advance,
Please help me.
Warm Regards,
Vijay

Hi Natalia,
First, I want to Say Many Thanks for the reply.
I am using the MaxDB 7.6.02.01 Version. Actually i don't know anything about MaxDB. I am MDM Consultant, I just want to use it as MDM Database.
Why I want to uninstall is: I don't know how to solve this problem that why i will just want to uninstall everything and re-install it again to make use of it proper with MDM.
I really don't know where to execute the commands which you specified in previous post.
I didn't find the files knldiag.err & knldiag files and
Only the following information i find and Here are the details.
Waiting for you replay... Thanks
DBM.PRT Information (Part of the file - So much data is exist in that file)
2009-01-13 19:19:56 0x00000810 INF        226 DBMSrv   DBM Server client disconnect: PID 2024 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 09:38:11 0x00000a98 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-14 09:38:10): PID 2664 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 09:38:11 0x00000a98 INF        283 DBMSrv   command db_online
2009-01-14 09:38:14 0x00000a98 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000a98 INF          8 DBMKnl   Statement: RESTART
2009-01-14 09:38:29 0x00000a98 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000a98 INF          9 DBMKnl   Statement: RESTART
                    0x00000a98 INF         10 DBMKnl   Returncode: 0
2009-01-14 09:38:30 0x00000a98 INF        226 DBMSrv   DBM Server client disconnect: PID 2664 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 12:01:56 0x000014d0 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-14 12:01:51): PID 4864 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 12:01:56 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:01:56 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:01:57 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:02:04 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:02:04 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:02:04 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:03:05 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:05 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:03:05 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:03:10 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:10 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:03:11 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:03:14 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:15 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:03:15 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:10:59 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:10:59 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:11:00 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:11:12 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:11:12 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:11:13 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:11:16 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:11:16 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:11:17 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:11:20 0x000014d0 INF        226 DBMSrv   DBM Server client disconnect: PID 4864 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 18:52:59 0x0000091c INF        216 DBMSrv   DBM Server client connection (established at 2009-01-14 18:52:58): PID 2316 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 18:52:59 0x0000091c INF        283 DBMSrv   command db_online
2009-01-14 18:53:13 0x0000091c INF          1 DBMKnl   Sending an administrative statement to the database
                    0x0000091c INF          8 DBMKnl   Statement: RESTART
2009-01-14 18:53:29 0x0000091c INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x0000091c INF          9 DBMKnl   Statement: RESTART
                    0x0000091c INF         10 DBMKnl   Returncode: 0
2009-01-14 18:53:39 0x0000091c INF        226 DBMSrv   DBM Server client disconnect: PID 2316 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 09:52:01 0x00000a90 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-15 09:52:00): PID 2628 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 09:52:01 0x00000a90 INF        283 DBMSrv   command db_online
2009-01-15 09:52:04 0x00000a90 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000a90 INF          8 DBMKnl   Statement: RESTART
2009-01-15 09:52:12 0x00000a90 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000a90 INF          9 DBMKnl   Statement: RESTART
                    0x00000a90 INF         10 DBMKnl   Returncode: 0
2009-01-15 09:52:12 0x00000a90 INF        226 DBMSrv   DBM Server client disconnect: PID 2628 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 20:18:21 0x00000b00 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-15 20:18:20): PID 2736 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 20:18:21 0x00000b00 INF        283 DBMSrv   command db_online
2009-01-15 20:18:24 0x00000b00 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000b00 INF          8 DBMKnl   Statement: RESTART
2009-01-15 20:18:33 0x00000b00 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000b00 INF          9 DBMKnl   Statement: RESTART
                    0x00000b00 INF         10 DBMKnl   Returncode: 0
2009-01-15 20:18:33 0x00000b00 INF        226 DBMSrv   DBM Server client disconnect: PID 2736 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-16 09:38:57 0x00000ab8 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-16 09:38:56): PID 2720 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-16 09:38:58 0x00000ab8 INF        283 DBMSrv   command db_online
2009-01-16 09:39:01 0x00000ab8 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000ab8 INF          8 DBMKnl   Statement: RESTART
2009-01-16 09:39:07 0x00000ab8 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000ab8 INF          9 DBMKnl   Statement: RESTART
                    0x00000ab8 INF         10 DBMKnl   Returncode: 0
2009-01-16 09:39:07 0x00000ab8 INF        226 DBMSrv   DBM Server client disconnect: PID 2720 on computer NLYEHVSCE1NB215.code1.emi.philips.com
Thanks in Advance,
Warm Regards,
Vijay

Could not start Oracle102iSQL*Plus service on local computer.

Hi,
After installation of SAP on Oracle 10.0.2.0, iSQL*Plus service was running fine,I installed with USER:= Administrator
however after login with <SID>adm, it stopped working.I have tried to login back from Both the Users and running the service by assigning User name and Password to it.But it gave me the same error.
could not start Oracle102iSQL*Plus service on local computer.
Error 1067:The Process terminated unexpectedly
Please help me to resolve this issue.
Thanks
Rahul

Hi,
I couldn't find anything in sqlnet.log,However in Event logs i found the following details
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module isqlplussvc.exe, version 1.0.7.0, fault address 0x000040b4.
The description for Event ID ( 17 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Failed to find ORACLE_HOME
I have also checked the Environment Variables.
Parameter ORACLE_HOME is also set.
I m using Oracle 10.0.2.0
Please advice
Thanks
Rahul

Error 3: "Windows cannot start the Firefox Service on Local Computer...?

When I click on the Services option under Microsoft Management and try to start the FIREFOX SERVICE I get this hiccup:
'''Windows could not start the Firefox Service on Local Computer;
Error 3: the system cannot find the path selected'''
...Any suggestions on how I can hep Windows find that path?
--I have a heck of a time getting windows to signal my Firefox browser--takes several clicks and over 6 or 7 minutes to emerge!
Thank you for your attention.
marlem388

Hi again, cor-el--
Many thanks for your help and diligence.
...I went through your advised operations, made sure I didn't delete my Personal Profile, and so on.
--Did not have a hard time uninstalling Firefox, and after I got rid of the downloaded file,
I continued re-installing Ff.
So all you suggested was fine and effective,
'''BUT''' I still get this weird message under Services in Administrative Tools:
'''Windows could not start the Firefox Service on Local Computer; Error 3: the system cannot find the path selected'''
--All the same, despite Local Computer's stubbornness , Firefox does emerge sooner than before, and I have you to thank for it.
Some day I will learn why Error 3 keeps being blind to Ff's path!
marlem388

EM console - Could not start the OracelDBConsoleSID service

Oracle 10g, Windows Server 2003
I have problem with EM console. When I restart machine OracleDBConsoleSID is stopped.
When I try to start this service:
Could not start the OracelDBConsoleSID service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
And then this service has status: Staring. EM then work for short time but then again service is stopped.
The Database works without any problems.
Please help!
Thanks in advance

When I try to start the service with CMD:
c:\oracle\product\10.2.0\db_1\BIN>net start OracleDBConsoleSID
The OracleDBConsoleSID service is starting.........................................................................
The OracleDBConsoleSID service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
+++++++++++++++++++++++++++++
In Events - Aplication:
Type: Error
Category: Disk
Event_ID: 6
Description:
An error occured while trying to initialize the service
++++++++++++++++++++++++++++++
======================================
In EM log files…
In OracleDBConsoleSIDsrvc.log
-------------- [OracleDBConsoleSID] ------------
EMDROOT=c:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\...._SID
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
02/25/10 14:15:45 Job Process API is available
02/25/10 14:15:45 Start pending...
02/25/10 14:15:45 Verifying dbconsole is not started already. Command line "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
02/25/10 14:15:56 dbconsole launch commandline is "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
02/25/10 14:15:56 Tracking process launch...
02/25/10 14:16:31 Received exitCode 1 from emctl istatus
02/25/10 14:16:40 Received exitCode 1 from emctl istatus
02/25/10 14:26:24 Received exitCode 1 from emctl istatus
02/25/10 14:26:32 Received exitCode 1 from emctl istatus
02/25/10 14:26:37 Timedout while tracking process to start. Terminating..
In emdctl.trc
2010-02-25 14:26:16 Thread-3200 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:24 Thread-320 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:24 Thread-320 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:32 Thread-2832 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:32 Thread-2832 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:36 Thread-3048 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:36 Thread-3048 ERROR http: 1736: Unable to initialize ssl connection with server, aborting connection attempt
In emagent.trc
2010-02-25 14:26:11 Thread-2240 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:11 Thread-2240 ERROR http: 1152: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:11 Thread-2240 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://...:5501/em/upload/: retStatus=-1
2010-02-25 14:26:20 Thread-2508 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:20 Thread-2508 ERROR http: 1148: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:20 Thread-2508 ERROR command: nmejcn: failed http connection to https://...:5501/em/upload/: retStatus=-1
Edited by: user9106065 on Feb 25, 2010 8:53 AM

SFC problem - "Windows Resource Protection could not start the repair service"

We are trying to attempt to fix a Windows 2008 start up problem. We boot the machine from a Windows 2008 CD and go to the repair tool - command prompt.
When we do the command sfc /scannow, we are getting
"Windows Resource Protection could not start the repair service"
We did some researches there someone suggested the trustedinstaller is not running so we tried to do a net start trustedinstaller.
But We are getting
"The windows modulers instaler service is starting
The windows modulers instaler service is starting could not be started
A system error has occured
System error 1067 has occured
The process terminated unexpectedly. "
Anyone can give us an idea to see why we can not run the sfc the first place. Thanks

SYMPTOMS:
All attempts to run command:
sfc /SCANNOW
keep returning the following message:
"Windows Resource Protection could not start the repair service"
SOLUTION:
If you are using any kind of boot image/disk to boot up, you will have to use the "offline" switches (OFFBOOTDIR & OFFWINDIR) along with the SFC /SCANNOW command in order to start repairing your instalation properly.
please remember to tripple-check for corret partition letters, because this is a crucial parameter for SFC to start working properly.
also make sure to confirm whether so called "recovery" partion exists in your specific scenario or not. If so, in most cases this will render the "recovery" partition being the one to be set as a boot partition (OFFBOOTDIR) within sfc command, while Windows
system folder (OFFWINDIR) will actually reside on a different partition.
My scenario is described exactly above and therefore in my case boot partition letter was C: and system partition was D: ...As of that - the proper command line to run SFC successfuly was:
sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
Successful scan for integrity of all protected system files and replacement of incorrect versions with correct Microsoft versions then looks like this:
X:\sources>sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\WindowsBeginning system scan. This process will take some time.Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.logwindir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log
Once SFC scan completed, I have run the Startup Repair from the repair dialogue menu prior rebooting the system. Remember to click "Cancel" on the prompt for using the System restore in this step. I am assuming you have tried this already time ago and confrmed
it did not resolve the problem, but most importantly - you really would not want to overwrite the files, which you have just repaired with any possibly corrupted ones ;)
After this I've unplugged bootable USB key with the My Windows Vista Enterprise 64bit setup disk image and restarted computer. System booted up properly on first attempt. No issues have been identified as a result of my post boot checks. This completely
resolved the issue in my case. Should you have questions, please let me know.
Pavel

Error : Could not start the SSO service. Please check the configuration

Hi,
I am getting the above error when enabling the"Agent-Based Windows Single Sign-On with Active Directory (Kerberos0".
I already twice did the KTpass.Timing is perfect bet CAS and AD.Please look into this CAS LOG file and advice me the next step to solve this issue.
Thanks
swami

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Fiori leave request error "Could not start the app due to an internal error"

Hi,
I'm getting this error "Could not start the app due to an internal error" when accessing leave request application.
I don't get this error when I login and launch the app for the first time. when I go back to the home screen and select "My Leave Requests" app again, I get this error.
If I close the error message and do a browser refresh, everything is fine again for the first time, if I access the LR app again- same error .
Other apps are working fine.
I don't see any error in gateway or App logs.
below is the Request URI
/sap/opu/odata/UI2/INTEROP/ResolveLink?linkId=%27LeaveRequest-createLeaveRequest%27&shellType=%27FLP%27&formFactor=%27desktop%27
Service call info
Anyone with similar issue? any SAP notes?
we are on
UI2_731        100    0009    SAPK-10009INUI2731        SAP UI2 IMPL. FOR NW 7.31
UI2_FND        100    0009    SAPK-10009INUI2FND        SAP UI2 FOUNDATION
UI2_SRVC    100    0009    SAPK-10009INUI2SRVC        SAP UI INTEGRATION SERVICES
UI5_731        100    0009    SAPK-10009INUI5731        SAP UI5 TEAM PROVIDER ON 731
UISAPUI5    100    0009    SAPK-10009INUISAPUI5    SAP UI5
UI_INFRA    100    0009    SAPK-10009INUIINFRA        SAP UI INTEGRATION INFRASTRUCTURE
UIX01HCM    100    0003    SAPK-10003INUIX01HCM    UI for HCM Application
Tags edited by: Michael Appleby

Hi Masa,
We have required SAP notes now, we are on version 1.22.5.
It is still the same, working the first time I access the App, but subsequent access wont work until i refresh browser.
I've include the response and lpd/tile screens.
Thanks,
Phani

Could not start the Bonjour Service service on local computer. Error 6: The handle is invalid

I have been trying to load teh new Itunes 10.5 for the last week and have been unsuccessful. When the load get to the Bonjour service it fails and puts up a message.
I have Administrators rights on the machine. I have updated the OS to the latest patch level. I have turned off the Anti-virus and Firewall and still this service will not load. Is there any Ideas of what I can try?

I thank everyone that responded to this post, I learned a lot from each of them. After my first attemps with Sean and Shanky I put it asside for a bit and got back to it today.
I did what Lydia suggested and disabled the TCP/IP (the Named Pipes was already Disabled) and left only the Shared Memory Enabled and the SQL Server started with no errors. I launched the software that was requiring the SQL DB and everything is working
correctly, which I find odd because the software specifically says to check that TCP/IP is Enabled when there are issues with their instance of the SQL Server not starting.
Since the software I needed the SQL for runs properly I will assume this is fixed.
Thanks again for everyones help.
PS - Sean, just to verify I did check and there was no forced encryption and verified that I had set the ports to different values for each instance of SQL Server.
Thanks for your time on this.

Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1

Similar Messages

Maybe you are looking for