Could not test Bex Analyser in SICF

I have a aS-ABAP system .
I have activated the BEx analyser from SICF, But when i test the service, i am getting a "Page cannot be displayed" message.
Pls let me know if there is any other services or programs to be executed for this
Pls help

What is the URL you see in the "Page Not Displayed" screen?
Did you set all parameters related to ICM?
icm/hostname_full, ICM port, Protocol for calling URL's in SPRO.
Regards,
Fahad

Similar Messages

  • After Effects error: Could not launch Adobe Analysis Server (515)   ( 25 :: 101)  *POSSIBLE FIX*

    Hi. Im New to the forums so sorry in advance if i do something incorrect
    Since my Purchase of Adobe CS6, I was not able to use dynamic link, or the plugins that required you to connect to the Adobe Analysis Server (3d Tracker, Warp Stablizer ETC) It would always give me the error
    After Effects error: Could not launch Adobe Analysis Server (515)
    ( 25 :: 101)
    Or if i would use dynamiclink
    The Importer created a generic error
    Through hours and hours searching through the internet, and trying possible fixes, i found possible fixes that might help people with this error.
    *Before attempting any of these fixes, make sure you reinstall CS6 Using the Adobe Cleaner*
    This guide is for Windows OS Only.
    If the error still presists, try these options
    -If your windows account is not a administrator, Run Adobe After Affects CS6 As Administrator
    -Disable your Anti-Virus and your Firewall
    I know you have probably heard this over and over again, but this is mainly the cause of the problem. Some Anti-Viruses even when disabled, go into some sort of one eyed open mode, where it still monitors your computer ever so slightly, so you may want to uninstall the anti-virus. As for the firewall,
    1) Go to your start menu search "Check Firewall Status"
    2)Then to the left of the window, click Turn Windows Firewall on or off
    3)Then tick "Turn of Windows Firewall" on BOTH Home or work network and Public Network.
    -Close and Uninstall filtering and spyware programs such as Netnanny and Premiere Opinion. This might be using the TCP Ports that is needed for After effects, dynamic link and adobe analysis server to communicate
    -Start up Adobe Analysis server Manually. This can be done by going to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files and running Adobe Analysis server.exe as Adminisrator, Then starting Premiere, After effects, etc.
    -If the Adobe Cleaner didnt already, Clean your registry. This can be done with free applications such as CCleaner.
    If none of those options work,  I would suggest a full format and reinstall of windows.
    I hope this would help people with this issue.

    captain_astronaut wrote:
    I'm running the latest version. Just installed yesterday.
    You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
    captain_astronaut wrote:
    I'm on a Mac so I don't have anti-malware, or other security software running.
    That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
    I certainly hope you at least have your firewall running.
    captain_astronaut wrote:
    I tried launching Premiere yesterday and it crashed.
    This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
    Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

  • Getting Data from RSRT but not from Bex Analyser

    Hi All,
    I am facing a strange issue with Bex Analyser(BI 7.0). When a user trying to execute a query/report he is not able see the input values what he supposed to see in parameters screen(Instead of his authorised values he is getting some other values in input parameters, eventhough he has sufficient authorisations (may be history)).
    When I tried to execute the same report from RSRT, everything is fine, I have tried another option as well.. that is I have copied the same access and executed with that then its working fine. I have cleared the cache from RSRT and tried. but no luck.
    If anyone come across to the same issue please let me know.
    Thanks
    Mani

    Hi BI-2010
    In rsudo transaction I can see the values as per the user profile. The issue with only Bex Analyser and one more thing I have created another userid with the same access and it works fine.
    And he didnt do the Bex personalisation.
    Thanks
    Mani

  • Help: Could not test the survey URL! It is urgent! Pls helpuFF01

    Dear All,
    I have test a survey in CRM GUI and it is no problem. Then I upload a xml template, name as 'CRM_SVY_BSP_CRMDEV_100.xml', and generate the URL
    'http://crmdev.ww.com:8000/sap/bc/bsp/sap/crm_svy_server/Survey.htm?sap-client=100&applid=CRM_SURVEY_OPPORTUNITIES&svyid=WIN_LOSS ANALYSIS&vers=0000000001&lang=EN&parid=CRM_SVY_BSP_CRMDEV_100.XML' . But when I test, the webpage show nothing(It is a blank page) and has no error. I do not why. Need your help! It is urgent.

    Try activating the service in SICF transaction .Also check if the correct version of Java is installed.

  • After Effects error: Could not launch Adobe Analysis Server. (515) (25 :: 101)

    Howdy,
    I just installed the Creative Cloud and I'm trying to add the Warp Stabilizer to a video clip. However, during the Analyzing phase, I get the above error message. I've read what I could find online relating to this, and made sure everything was updated, and checked the permissions of the Adobe folder in the Library, but I still get the error. Is there a fix? Why would I pay a monthly subscription if I can't even use the product?
    I'm on a
    2009 Mac Pro
    2 x 2.26 GHz Quad-Core Intel Xeon
    32 GB RAM
    OS 10.9.3
    Any suggestions?
    Thanks in advance

    captain_astronaut wrote:
    I'm running the latest version. Just installed yesterday.
    You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
    captain_astronaut wrote:
    I'm on a Mac so I don't have anti-malware, or other security software running.
    That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
    I certainly hope you at least have your firewall running.
    captain_astronaut wrote:
    I tried launching Premiere yesterday and it crashed.
    This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
    Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

  • Services not testing in SICF

    Hi All
    i have installed Netwever BI 7.0.All the post installtion steps are also completed.The problem is that i whenever a test any service in SICF,it fails.Bex broadcaster is also not working.I think it is related to service issue.Kindly suggest.
    Shankar

    Hi Shankar
    have you checked 8055 is running or not in SMICM and also the parameter for serverport for port 80$$ is set or not...
    Bhudev

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ACL migration Error : 1210 could not find a domain controller for domain "Test Domain" (Old Domain)

    Hi
    We are migrating from old domain to new domain. Before live migration, we are trying to check the ACE/ACL migration through SubInACL. We are running the SubInACL on a cluster, which is a member of the Old Domain (Test Domain). We are able to resolve and
    ping both Old Domain and the New domain from this cluster machine. We have created a network share on this cluster, which is accessible to all Domain Users of the Old Domain. Both Domains have two way forest level trust. we are trying to migrate
    the ACL of this share (\\ClusterMachine\testshare$) to the new domain using SubInACL. We are trying to run the below command to get it done.  
    subinacl /outputlog=C:\Users\Administrator\Desktop\Migrationlog.txt /subdirectories
    \\ClusterMachine\testshare$\*.* /migratetodomain=OldDomain=NewDomain=mappingfile.txt
    Mapping file contains : Domain Users=NewDomain_Users
    But we are geeting the Error that "1210 could not find a domain controller for domain "Test Domain". Error finding domain name : 1210 the format of the specified computer name is invalid. Current Object "\\ClusterMachine\testshare$"
    will not be processed."

    Hello,
    how in detail is DNS set up in each domain?
    Any problems when using nslookup to verify?
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Error "Test Agent could not connect to the test controller" while configuring the Test Agent on Client machine

    Hi,
    I am getting an Error “Test Agent could not connect to the test controller”
     while configuring The Test Agent on Client machine.
    Pre-requisite used:  
    VS2012 update 4, Test agent & Test controller of same version used
    User has TFS admin access.
    Same user id used for configuring Test Agent.
    Description:
    Test controller is installed on server A. I want to install test agent on client machine B.
    Windows Fire wall is OFF on both Machines A & B. While configuring Test Agent below error is occurred:
    “Test Agent could not connect to the test controller”
    In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”
    In Event viewer below error details given:
    Unable to connect to the controller on ‘My Server: 6901’. The agent can connect to the controller but the controller cannot connect to the agent because of following reason: The requested name is valid, but no data of the requested type was found.
    Make sure that the firewall on the test agent machine is not blocking the connection.
    Could you please help me to find solution?
    Thanks in advance!
    Kanchan M
    Kanchan

    Hi Kanchan,
    So on each computer, you create a local user account that is a member of the Administrators group, and use the same account and password on each machine(controller and Agent), am I right?
    Could you enable the detailed log message?
    http://blogs.msdn.com/b/aseemb/archive/2010/03/07/how-to-enable-test-agent-logs.aspx
    http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
    >>In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”I
    met a similar issue before which was related to the Firewall exceptions, maybe you could refer to it here:
    http://stackoverflow.com/questions/12249093/test-agent-could-not-connect-to-the-test-controller-vs2012-agents
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

    Hi,
    We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
    Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service.  Possible causes include: the service is either not installed or the specified service name is invalid.
    Any help is much appreciated.
    Thanks

    Hello,
    The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
    Sean Gallardy | Blog |
    Twitter

  • HOW TO RESOLVE(Test failed: The Network Adapter could not establish the connection)

    Hii
    I want to create new databse as sysdba in jdev.I followed the steps as given in
    Oracle JDeveloper 11g Release 2 Tutorials - Designing and Building Database Tables
    In step 7 create database user and database connection, I am not able to do that and getting the error
    (Test failed: The Network Adapter could not establish the connection).
    Please help me.

    Hi,
    Could you please provide all value you pass to the connection properties on the connection creation panel? First of all, you should choose "Generic JDBC" as the connection type in order to use BDB SQL JDBC driver.
    Regards,
    Cindy

  • Connection test to database failed: could not connect to server

    I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading.  I am seeing the following errors in the logs indicated:
    /var/opt/OV/log/nnm/public/nmsdbmgr.log
    04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
    Is the server running on host "127.0.0.1" and accepting
    TCP/IP connections on port 5432?
    /var/opt/OV/log/nnm/public/postgres.log
    2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
    2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
    2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
    I checked /etc/hosts and found the following entry:
    #; Local
    127.0.0.1 localhost
    From the command line I can ping localhost with no issue.  Not sure why NNMi is not starting at this point. 
    This question was solved.
    View Solution.

    I also attempted to do a reset using nnmresetebdb.ovpl.  I recieved the following:
    Attempting to reset the embedded database...
    Starting nmsdbmgr process for database reset...
    nmsdbmgr process did not restart successfully - please try reset again.
    When I run ovstart -c I receive the following:
    Name PID State Last Message(s)
    OVsPMD 29831 RUNNING -
    pmd 29832 RUNNING Initialization complete.
    nmsdbmgr - NOT_RUNNING - Exit(1)
    ovjboss - UNSTARTABLE -
    nnmaction - UNSTARTABLE -
    ovspmd: Attempt to start HP OpenView services is complete.
    I definitely need some help with this please!  
    Thanks!

  • Debuging mapping - error : Could not find test data for target operators ?

    Hello, Please help me.
    I use Oracle Warehouse Builder 10gR2.
    I created a cube with two dimensions.
    I debugged the mappings of these two dimensions then viewed their data after deployment.
    I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
    For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
    But the error is here: Could not find test data for target operators. Why ??
    How to configure or explain to owb that the target operator do not have test data ????
    I need your help.
    thank you in advance.

    Sorry, I can not understand your approach ?
    I explain you in detail : I work in ROLAP.
    I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
    I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
    For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
    I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
    I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
    thank you for help.

  • SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

    Hi, I'm running the following setup:
    Mac OS X 10.8.4
    Virtual Box 4.2.16 r86992
    Oracle Developer Days (don't know the version, just downloaded it)
    SQL Developer 3.2.20.09
    Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
    $ ping 192.168.56.101
    PING 192.168.56.101 (192.168.56.101): 56 data bytes
    64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
    ^C
    --- 192.168.56.101 ping statistics ---
    1 packets transmitted, 1 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
    $ telnet 192.168.56.101 1521
    Trying 192.168.56.101...
    Connected to 192.168.56.101.
    Escape character is '^]'.
    asdf
    asdf
    Connection closed by foreign host.
    When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
    Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
    I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
    ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
    Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

    Hi Ali,
    This may be of varoius reasons..
    Is the database that you are connecting on the same PC?
    You have specified Hostname: localhost.
    If not please replace it with the IP of that server.
    Else please check whether the database listener is started or not. if not please start the listener.
    Check the SID by tnsping command.
    Hope this will help you..
    Thanks
    Ashok

  • Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again.

    We are trying to run unit tests in TFS server.
    Below is the System Configuration:
    Visual studio version: VS 2013 Ultimate
    TFS: TFS 2013
    For this we have created a build and able to run the build successfully. And build page showing one link for Test result. When we click on this link, we got below error message.
    "Getting TF42008: The test case management package could not be loaded. Verify that Visual Studio Test Tool is installed and try again."
    And below is the screenshot of the error message. So please let us know is there and thing else we need to do to solve this issue?

    Hi RS, 
    Thanks for your reply.
    Yes, if you want to open and view test result on your laptop, you need install the VS 2013 on your laptop as well.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for