Could not update the kernel parameter when oracle 10g Installation.

Hi,
I tried to update ip_local_port_range in sysctl.conf file.
vi /etc/sysctl.conf
net.ipv4.ip_local_port_range=1024 65000
After changing the value i executed following command,
sysctl -p
Error : Unknown error 22 setting key 'net.ipv4.ip_local_port_range'
Please help

You didn't specify if you are on a linux based OS, it looks like you are, but it would be so kind on your side if you clearly specify the OS version and which DB version you are planning to install.
When I perform installations of DB10gR2 on OEL4/OEL5 or RHEL4/RHEL5 i issue this commands:
echo net.ipv4.ip_local_port_range = 1024 65000 >> /etc/sysctl.conf
Once the kernel parameter have been set, the kernel must be re-read with the /sbin/sysctl -p command.
~ Madrid
http://hrivera99.blogspot.com

Similar Messages

Windows could not update the computer's boot configuration. Installation cannot proceed.

HELP!!!
Windows could not update the computer's boot configuration. Installation cannot proceed.
The installation then it says "The installation was canceled" and "Any changes to your computer won't be saved.
I have been trying to sort this out for over 15 hours.
I have the MacBook Pro (Late 2011)
Quad Core i7 (Clocked at 2.2GHz)
4GB Ram
Radeon Graphics (512mb graphics ram)
Running OSX Yosemite (10.10.2)

Did you have to modify Bootcamp Inof.plist to see the USB Installer option?
Your USB device needs to be a USB2 device. Here is an example.

Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012

I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
cannot proceed. It cancel the installation. Can anyone help me with my problem?

Hi,
Any update about the issue?
Please post more detail information about the issue?
How did your do the installation? clean install or override install?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

ITunes could not update the carrier settings on your iPhone

When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?

Jim VanLeeuwen wrote:
You will find them in separate folders within your user account Library/iTunes folder.
That was it. Somehow the owner of ~/Library/iTunes got changed to root.
Jim VanLeeuwen wrote:
Have you tried using Disk Utility to Repair Permissions?
Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
I manually changed the owner to steve and was able to download and install the carrier settings.
Thanks!

PC Sync could not update the data to the mobile ph...

Ok now I am a little annoyed with my Nokia 6680.
For the last four months it has been working fine but all of a sudden it has stopped synching with either of my PC's.
The phone connects ok and I can do file transfers etc however when I try to sync it fails with the message
"The Synchronisation has been Terminated!"
and
"PC Sync could not update the data to the mobile phone."
I updated PC Sync to latest version on both PC's and I have tried cable and bluetooth connections but get the same issue.
In the end I bit the bullet and re-initialised the phone and it began working again.... for three days and then its doing the same thing again. It still connects ok but no sync.
My Laptop is using WinXP SP2 and my home PC is on WinXP SP1.
Anyone able to help with this please, my phone is effectively now a paper weight and I will go back to Pocket PC phones again.

Thanks for the tip I had the SAME problem on the 6822 same error. The phone had been fine for a month or so. Then nothing would synch, thought it was the PC fixed / reinstalled the software changes options nothing would work same error.
Read your note, powered down the phone and Bingo all synched fine!
Thanks very much. I'm using a Nokia 6822

Error ''windows could not update the computer's boot configuration"

i have an Hp pavilion dv 6 -3045 product wr747ea#abe ,till now i installed windows 7 on it several times but this time after i formated the partition and started the instalation from usb at completing the installation a message popup ''windows could
not update the computer's boot configuration''.Also i tried with another copy of windows 7 also booted from usb but i get same message at same step. I used a memory stick and bootable windows 7 from usb with Rufus program.
Please any sugestions ?

Hi,
Please make sure you have format the system drive and perform a clean install, not just override or upgrade from the previous system.
The bootloaders for Windows Vista and Windows 7 are quite similar, you could have a look at this article and see if it's helpful to you:
When I try to upgrade an earlier version of Windows to Windows Vista, I receive an error message: "Windows could not update the computer's boot configuration"
http://support2.microsoft.com/kb/931697
Karen Hu
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

HT1923 I could not update the new version of itunes. I uninstalled the previous version, but I cannot get the new version to update on my windows 7 i5 pc..any solutions? thanks

I could not update the new version of itunes 11.1.4.
It told me to uninstall the old version, but I cannot install the new version.
Any help?/ solutions?
Thank you

Hello jasopz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best of luck,
Mario

TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Resolve iOS update and restore errors

"could not complete the requested operation" when i try to open the program

"could not complete the requested operation" when i try to open the program
what can i do
illustrator cc

accupub,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Windows could not update the computer's boot configuration. via UEFI installation

I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r

Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

Windows could not update the computer's boot configuration Server 2012

I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
ready section, but stops and throws me this error.
Windows could not update the computer's boot configuration
After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
I'm running Windows 7 Home Premium on an ASUS K45 64 bit.

Hi,
You can try adding a new boot entry by using bcdedit tool:
Adding Boot Entries
http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
Or you can build a usb-bootable deivce to install the image:
Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
Hope this helps.

ORA-12154: TNS:could not resolve the connect identifier specified Oracle 11

I'm having a slight issue with Oracle 11 R2
Oracle 10g was removed from the machine - The registry was cleared and I couldn't see anything of 10g left.
I then installed Oracle 11 with just the software only, and then created a listener.
Using the Database Configuration Assistant, I tried to add a database but I get the error:
'ORA-12154: TNS:could not resolve the connect identifier specified'
The TNS_ADMIN is set to: \\ravel\tnsnames and I can connect to other instances around the company.
My tnsnames entry is:
GMAN_1120.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = gman)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora112)
If i start the listener i get:
TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
System parameter file is D:\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Log messages written to d:\oracle\diag\tnslsnr\gman\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=gman)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date 03-AUG-2011 10:34:28
Uptime 0 days 0 hr. 0 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File d:\oracle\diag\tnslsnr\gman\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=gman)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "ora112" has 1 instance(s).
Instance "ora112", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
Can anyone spot what may have gone wrong? I've setup 10g multiple times and never had a problem

I can tnsping my machine using another machine:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = gman)(PORT = 1521))) (CONNECT_DATA = (SERVIC
E_NAME = ora112)))
OK (30 msec)
My listener.ora file is:
# listener.ora Network Configuration File: D:\oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(SID_DESC=
(GLOBAL_DBNAME=ora112)
(ORACLE_HOME=D:\oracle\product\11.2.0\dbhome_1)
(SID_NAME=ora112)
)

"Could not load the system tables" when installing the MAXDB DB instance

Hello,
We have an error when we are installing the MAXDB 7.5 for Netweaver 04's Unicode Kernel.
The central instance is installed, but when we launch the DB Server, in the step 14/25 Activating the DB, the follow error ocurrs.
"ERROR 2007-03-12 11:44:21
MDB-07048 Could not load the system tables. Check the files 'dbm.prt' and 'dbm.ins' in the run directory of the database (search fo
r "load_systab") or call the Support Center."
the file dbm.ins is not found, but the file dbm.prt have:
2007-03-12 11:44:14 0x00000a94              0 DBM      command load_systab
2007-03-12 11:44:14 0x00000a94 ERR     -24964 DBM      ERR_EXECUTE: error in program execution
                    0x00000a94 ERR     -24964 DBM      256,/sapdb/XIP/db/bin/x_python /sapdb/XIP/db/env/lsystab.py -R /sapdb/XIP/db
-d XIP -u SUPERDBA,*.
I search information in OSS, but we can't found solutions.
Best Regards, Alberto.

Hello Alberto,
if you're an SAP customer, can you open a message about this error, and enter a service connection into the MAXDB server?
Thanks,
Ashwath

Could not update the kernel parameter when oracle 10g Installation.

Similar Messages

Maybe you are looking for