Could not use 'host' command in my custom form in 11i

Dear all,
The 'host' command makes the application wait and leads to no further response.
Thks & Bst Rgds,
Edward

Would anyone pls help me?

Similar Messages

  • Could not complete the command because of a problem using the Adobe Color Engine

    Hi all
    This bizarrely started this morning - completely out of the blue - and I've no idea why.
    Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
    Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
    As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
    Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
    I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
    At present I can only safely carry out the work 'manually' by completing all the actions myself.
    I can think of no settings that have changed and the OS hasn't been updated in a while.
    I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
    Any help appreciated as I have a shedload of stuff to process.
    Best wishes
    TP

    OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
    BUT!
    Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
    Will try that out this afternoon, but for now: WIN!
    Many thanks for the suggestion!
    TP

  • Could not complete the command because of a problem using the Adobe Colour Engine??

    When I am playing back a set of recorded actions, I receive a message that says "Could not complete the command because of a problem using the Adobe Colour Engine". This occurs after I copy a part of an image to paste it onto a new file. It occurs during the "Make" part(making a new file) and I was just wondering how to fix it.

    It's a known (but esoteric) bug in Photoshop CS5 and earlier, seen with grayscale images.  It used to crash utterly, but after I reported it I think they patched Photoshop 12.0.something to avoid the crash.  However, the step still fails when you make a new grayscale image in an action.
    I saw it because I created an action to paste the clipboard into new document, all in one motion.  It virtually always works as long as I have a colored image in the clipboard.  But not grayscale.
    One workaround, which is not particularly convenient, is to turn on prompting for the Make new image step.  I haven't used this workaround for a while, but it used to be that if you confirmed the "File New" operation manually it would continue and work.  I don't know if the workaround is still valid.
    -Noel

  • Hi when i open Photoshop i get this message in a little box  (could not complete the command because Photoshop was unable to find the JavaScript  plug-in.)  Im using the trial version of Photoshop

    im wondering if anyone can help with this
    I get this message when i open PhotoShop
    (could not complete the command because Photoshop was unable to find the JavaScript)

    Photoshop installer should have installed a ScriptingSupport Plugin in each version of Photoshop you installed. Scan your system for ScriptingSupport I found six on my windows system. Here where I found them:

  • Use Host command in Oracle forms 6i

    hi
    all
    i use Oracle forms 6i i run in a web and in that i have connect one server so,
    i have to use Host Command and i have to fire this command
    host (' net use \\windchillsvr\e\jyotionline /user:dwg_users dwg_users');
    But it's Not Connect
    My Forms in run in Web
    so help

    JavaBean does d othe job for you but it requires signing process; I used it when I was working on forms6i for our project.
    I could use another approach that is the file type command executable which it stays in client's PC to do it and it does not requires signing at all since I am now working on the Java EE project for downloading and launching the third party tool in client's PC.
    I plan to write a article for forms use, which could do all the heavy WebUtil can do, but not need to go thru the signing process.

  • Could not complete the command because there is not enough memory (RAM)

    Hi Folks:
    I am running into an error (Could not complete the command because there is not enough memory (RAM)) when trying to open any file of any size or any format.on my Mac.
    This error occurs when:
    No other applications or files are open
    Upon a fresh reboot
    After Repairing Disk Permissions
    The files can be opened by Fireworks and other image editor apps or video apps
    My SPECS:
    OSX 10.5.8
    4GB 667 MHz DDR2 SDRAM
    120.41 GB Free space available
    Graphics: GeForce 8600M GT - VRAM 512 MB
    PhotoShop settings:
    Available RAM 3072 - Let PS use 90% (2764)
    I really appreciate the help.

    http://forums.adobe.com/thread/370739?tstart=0
    http://forums.adobe.com/thread/370735?tstart=0

  • Could not complete the command because of a program error

    I am running CS3 and for some reason, I get this error on many of the filter options. To reproduce:
    - load any picture - it does not matter what format I use
    - create a new layer by selecting the new layer icon at the bottom of the layers pallet
    - with the new layer selected, going to the menu item filter/blur/Gaussian Blur
    I have reset the preferences by pressing ctrl/alt/shift while bringing up Photoshop.
    I also have reinstalled (repaired) Photoshop.
    I've tried many different pictures with several formats (raw, .psd, .jpg) with no luck.
    Interestingly enough, the filter Lens Blur does come up with the screen.
    What am I doing wrong? This should not be rocket science.....
    Thanks,
    Steve

    "...create a new layer by selecting the new layer icon at the bottom of the layers pallet..."
    That produces a blank layer. With this blank layer selected, you should get the message "Could not complete the command because the selected area is blank".

  • Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5

    On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
    On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
    Apple Support Communities
    Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
    created by The hatter in Boot Camp - View the full discussion
    This solved my question 
    This helped me
    you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
    This solved my question 
    This helped me
    Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
    Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    © 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
    hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit 
    I writ again my problem  
    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5   Software  Mac OS X Lion 10.7.2 (11C74) 
    but there is no sound in windows 7  please send me a address sit for downoad driver that i can use in Afghanistan 
    believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
    please help us by address site please please .....
    <Edited by Host>

    hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
    I writ again my problem 
    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5   Software  Mac OS X Lion 10.7.2 (11C74)
    but there is no sound in windows 7  please send me a address sit for downoad driver that i can use in Afghanistan
    believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

  • Calling SQL Loader from Forms 4.5 using HOST command in Win2000

    One of my forms calls SQL Loader 7.3 using HOST command to load a csv file onto the database(Oracle 7.3) under Windows 2000 platform.
    Only after sql loader finishes its operation the control should come to my form i.e. synchronous execution.
    As of now its running asynchronously.
    Is there any way to make it synchronous. If Not any other work arounds?
    Environment Details
    Forms [32 Bit] Version 4.5.10.6.0 (Production)
    Windows 2000 Operating System
    Oracle7 Release 7.3.2.3.2

    Forms6i running on W2000, Rdbms 8.1.7
    in Forms I added a button TEST,
    Trigger when-button-pressed : host('test.bat') ;
    in directory .......\frm I added file test.bat :
    REM ===============
    cd /d C:\........\ldr
    pause
    sqlldr parfile=test.par
    pause
    type test.log
    pause
    exit
    REM ================
    now, pressing TEST button opens DOS window, telling me what's going on, running sqlldr, finally going back to forms
    Are you using NO_PROMPT or NO_SCREEN option of HOST command ?
    Had a look at Forms 4.5 manuals, there is no mentioning of (a)synchronously operation in connection with HOST command.

  • Could not resolve host (nil); Unknown error

    Trying to install arch linux into virtualbox...
    I got it to boot and everything, got my internet set up (I think), installed virtualbox guest stuff, and then had to reboot.
    I try to do sudo pacman -S xorg-twm xorg-xclock xterm so that I can test X before installing a desktop enveiroment..
    It then asks me for my password, the Y/N thing, etc.
    And then I get a whole bunch of lines saying "error: failed retrieving file [filename] from [somewhere] : could not resolve host (nil); Unknown error"
    And after that it says error: failed to commit transactions (download library error)
    I follow this guide (http://wideaperture.net/blog/?p=3851), I am currently right above step 17.
    Anyone knows what to do? I'm installing Arch Linux for the first time so I'm a total newbie.

    Type journalctl with sudo, then push the end key to go at the last messages.
    The guide you followed said :
    sudo systemctl enable [email protected]
    But with rescent archlinux changes, as you said with the result of 'ip addr', the base name of ethernet device has changed to enp0s3, maybe that's why you don't have the network. First disable the previous command :
    sudo systemctl disable [email protected]
    Then enable with the right name
    sudo systemctl enable [email protected]
    Either way, paste here the logs of journalctl (just type if you see some errors) after doing a
    sudo systemctl restart dhcpcd
    We never know, but have you checked your ethernet cable is plugged in?
    For the screenshots, when I'm in virtualbox and do left ctrl+e, a window pop up to save the .png...

  • Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

    Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

    Are you working with more than one layer?  If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer.  I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
    At least for me this is the case when getting that type of message.  I am very new to this program though, so maybe someone else has a more concise answer for you.
    Good luck and write again if this doesn't help.
    Moon52
    Sent from my iPhone

  • Could not use color replacement tool because it only works in full color mode: Elements 11

    I have a PSD file open and I added a new layer via the copy command.  I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer.  I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode".  The Image>Mode is set to RGB.  I'm stuck!

    First, show the tools optiond in the bottom of the screen (shortcut F4)
    Now look at which of the three options you can select, brush, impressionist brush or replacement tool. I suspect you have to select the brush.
    Edit:
    The reason of the message is that when you are painting on a mask you are in greyscale mode for the mask. For instance, if you paste a coloured layer into a mask, it will be converted to greyscale.

  • Using host command

    hi all i am shayan and again prob:-(
    i am using oracle 9iDs and forms are run on the web......i had used host command...but it is only open the program on the server....for example i haved open calculator with host command but it is only open on server not on the local computer

    Forms was originally designed as a client/server product. This means that functions like HOST, TEXT_IO, OLE, etc were expected to perform a task on the client machine. Well, this really hasn't changed with the deployment moving to the web. However, the difference is that the client to the database is now the middle tier and these tasks are executed there.
    To perform actions on the end-user (client) machine you will need to use a signed Java Bean. As mentioned by harmvos, Oracle offers WebUtil as an add-on to Forms if you don't want to write your own Java Bean. It can be used with Forms 9.0.4 and newer. It can be used with 902, but since 902 is no longer supported, this isn't recommended.
    http://www.oracle.com/technology/products/forms/htdocs/webutil/webutil.htm

  • Error "CRM business partner could not be mapped to an ERP customer

    Hello experts
    Kindly help
    I am creating quotation in crm web UI and  when  i save it it gives warning message "CRM business partner 65451 could not be mapped to an ERP customer"
    when  i checked in ECC system for same  quotation it is avaialble there .
    Then why this warning message is coming
    rply

    Hello
    You have to define mapping between CRM and ERP customer. The information which customer is associated with which BP is stored in CRM in table CRMM_BUT_CUSTNO and but0id. Use transaction PIDE on the ERP side to form mapping. Then work with load of customers.
    Such error appears when data about BP is entered in document directl but system couldn't find mapping in tables above. Hope it helps.
    Regards, EL

  • I just renewed my subscription (today, at 24:30 am), but so far I could not use the program (4:37 pm are). I tried to call in the support numbers, but no one answers. When I try to re-download the program, nothing happens.

    I just renewed my subscription (today, at 24:30 am), but so far I could not use the program (4:37 pm are). I tried to call in the support numbers, but no one answers. When I try to re-download the program, nothing happens.

    Hmmm, odd. Take a look at the "correct answer on at this link: Re: "Renew your Subscription" This Adobe help link too: Sign in, activation, or connection errors | CS5.5 and later
    If that doesn't help you will need to contact Adobe directly: Contact Customer Care 1 (800) 833-6687
    Benjamin

Maybe you are looking for