Could not use the color replacement tool because it only works in full color modes

Hi, when trying to use the Color Replacement Tool, I get this error. I'm not sure how to get in full color mode. Please help.

Go to Image>Mode and be sure it's RGB and not index color or something.

Similar Messages

Could not use color replacement tool because it only works in full color mode: Elements 11

I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB. I'm stuck!

First, show the tools optiond in the bottom of the screen (shortcut F4)
Now look at which of the three options you can select, brush, impressionist brush or replacement tool. I suspect you have to select the brush.
Edit:
The reason of the message is that when you are painting on a mask you are in greyscale mode for the mask. For instance, if you paste a coloured layer into a mask, it will be converted to greyscale.

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document"

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document". Can someone please help me fix this? It's never done this before until now...

First go to the editor preferences>general and click this button, then restart the editor and try again. If that doesn't do it, more info, like your version of PSE and your operating system:

Could not use the clone stamp tool because the area to clone has not been defined

Freshly installed Elements 10. Can not use the option-mouse click to define an area for the clone stamp. The error I get is:
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
New Mac Mini. Had the same problems in Elements 9 so I installed the 10 trial. Is this a key binding error? Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system.
I'm not a newbie and know how to use the clone tool. I won't say I'm an expert so if it's something related to layers please throw out some ideas.

This problem came back up. I hadn't used PSE since last November and was frustrated to run into it again. I don't think it's a layers issue afterall.
I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use. Regardless blue tooth is on for these devices. Problem exists. Turn bluetooth off on Air and the problem is gone. It must be related to option key when bluetooth is on, I guess some different mapping. Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
So now where do I look for configs to check?

Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

Are you working with more than one layer? If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer. I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
At least for me this is the case when getting that type of message. I am very new to this program though, so maybe someone else has a more concise answer for you.
Good luck and write again if this doesn't help.
Moon52
Sent from my iPhone

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

Could not use the spot healing brush because of an internal error!

Hi All. I have been trying out the Photoshop CC trial and all is well but all of a sudden I have been getting the "could not use the spot healing brush because of an internal error" message when I'm using the healing brush rapidly! I'm sending the tiff file from Capture One Pro 8 as a Tiff file so I'm not sure if this has anything to do with it.
Many Thanks

Hi it does not crash but I looked in the Photoshop Crashes folder anyway and it was empty! The message flags up and then press OK to remove it.

Could not load the Multiprocessor Support module because it wont work with

Here is a strange error message, there are actually 2.
But they arent making PSE 8 unusable, just very annoying.
Here is the first one,,,,,,,,,
"Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
My new Mac has 2 processors? Could that be what the message is saying?
But when I click the error message away, PSE 8 works fine.
There is another one too,
"Could not load the FastCore Routines module because it doest not work with this version of photoshop."
I just click it away and no problem, just a pita.
So if they dont effect it, I shouldnt worry, but my classmates are concerned.
Do you here have any idea what it is, and how to get rid of it?
There is info on the web about it, but no solutions.
Thank you,
Jane

This is interessting, as does my new Mac have 2 processors or 2 cores? I havent come across how this works yet, nor how to find it on my Mac.
Yes, I just found a site which explains it well,
http://macperformanceguide.com/Optimizing-Cores.html
I have one processor with 2 cores.
And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
You sure explained this well! I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
http://kb2.adobe.com/cps/407/kb407809.html
Is what Adobe tells us, this is for Windows, but it could apply to Macs?
I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before. Thats confusing, as I would have thought it would have shown up right from the start.
I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
This will be fun to see what the real answer is! As I find out more, I will add it here.
Thank you,
Jane

Could not use the colour replacement mode

I ofen use Elements (12 currently) to remove backbrounds. So I ensure I have a layer and create a linked mask. Then ensuring that the 'black' mode is selected I usually use a brush to remove the 'background' and leave it transparent. I recently have an imported photograph which is now a layer. Created a linked mask and tried this. But as I put the brush on the layer it said that it couldn't do this as it was NOT in FULL COLOR MODE. I see from a previous question that you must be in RGB mode. So I checked on the Image -> Mode and it says I am on RGB. I know in RGB you can have different colour depths 8 bit, 24 bit etc... So I thought maybe it wants a higher mode? But I can see no place to increase or decrease the colour depth? I am new to Elements. I looked in my Photoshop Elements 11 for dummies and that didn't help me? Can any one tell me why on this RGB layer I cannot use the mask/tool replacement as I do normally?

The images I have generally pulled into Photoshop are JPEG which should be in 8 bits. When I look in their TAB they are saying /8 so they are in 8 bit mode which is why I can't convert them to 8 bit/channel I suspect because they are already 8 bit. So why the MASK removing part of the layer image won't work I don't know? I have used this function many times and now it won't work and it is 'driving me nuts'! Any more ideas?

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

Could not use the move tool because no layers are selected.

This problem started a few days ago. I like to hold down the "Shift" key when moving a layer (either text or image) to keep the horizontal spacing locked. It was never a problem but a dialog box is now popping up with the following note: Could not use the move tool because no layers are selected.
There's no problem if I'm not holding the "Shift" key but I can't keep the layer from moving up or down. I could just use the arrow key but sometimes I need to move the layer quite a distance.
Also, I'm noticing that if I don't have the cursor directly on the type/image layer, regardless of whether the "Shift" key is selected, a rectangle similar to when the "Rectangular Marquee Tool" is used appears and the layer I had selected is no longer selected.
Any ideas as to why this might be happening? Thanks for the help.

Sorry about that. I'm using Photoshop CS4. There are no layer masks and I'm working over a solid white background (although it's happening in all my files, some of which have multiple layers).
I'm mainly designing DVD sleeves, posters, invites, etc. The layers contain images, live text, vector smart objects, etc. and the problem is happening with all layers, regardless of what it is (text or image).
When I have the mouse directly over whatever it is I want to move and hold the shift key I get the "Could not use..." dialog box. When the mouse is NOT over the image/text, but I have the correct layer selected, I get the "Rectangular Marquee Tool" look, a "dashed" rectangular box wherever I've moved the mouse.
Hope the info is helpful and thanks for responding...

"Could not use the clone stamp because the area to clone has not been defined (Alt-click to define a source point)".

Few users access our Photoshop through Citrix on a mac but use a Windows 7 platform once they're in Citrix. They're all having issues using the Clone Stamp tool. Get the error "Could not use the clone stamp because the area to clone has not been defined (Alt-click to define a source point)". We've reset the clone stamp tool, reset all the tools, and reset the preferences. We've made sure that we're in All Layers. Nothing seems to be working. None of the other forums helped either. Adobe support is no help either.
Thanks,
Moe.

Did you check with Citrix support? Did you try both of the Alt keys.

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?

If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool.

Annoying 'Could not use the history eraser because the current canvas size does not match that of the history state' message

Does anyone know if it is possible to get rid of the message 'Could not use the history eraser because the current canvas size does not match that of the history state'?. It comes up if I hit the alt/option key while I have the eraser selected. Something I do by accident all the time.

The way you've described it, one gets the distinct impression you do not have a clue as to what the history brush does and how to use it.
You need to read up on it. Read the Help files and google for tutorials.
First you need to create an image (with actual pixels in it), edit it as desired, then make a snapshot of the edited image, then target the snapshot with the history brush tool, then go back in the History panel to the step before your edits and selectively paint your edits in with the History Brush.

"Could not use the ***** because of a program error"

I'm using Photoshop CS CC on the new Mac which looks like a rubbish bin, and keep receiving "Could not use the ***** because of a program error". Does anyone know a work around or fix as I can't work with photoshop.

There seem to be recurring permissions errors for Photoshop running under OS X Mavericks. You might check into disk utility : repair permissions, or very carefully manually altering permissions here and there.
Not entirely sure this relates to your issue, but it might help: http://forums.adobe.com/thread/1404674?tstart=0
And http://forums.adobe.com/thread/1403095?tstart=120
And I'm sure you can search for several more threads related to permissions issues with Mavericks. I think Apple needs to do an update to Mavericks. But with careful permissions alteration, you can probably get PS working.
Once you're pretty secure in what permissions can change and what permissions should never change, you can Google a permissions utility called BatChmod. It rocks, is extremely powerful, and in the wrong hands can destroy your entire system. :+) So be careful ...

Could not use the color replacement tool because it only works in full color modes

Similar Messages

Maybe you are looking for