Could not wake up
Hi, i have this thinkpad t400 laptop. The problem with it is that i pressed fn+f4 to let it sleep. When i got home, i switched on my laptop but the light display only the battery icon and the moon icon and thats all. There was no activity. This led to me losing all my information i have done previously. And, this was not the only time i encountered this problem. Can someone provide a solution? Thank you
Hi, unfortunately I also encounter this problem once in a while. I know of no fix, but as the T400 also has other problems related to the sleep state I strongly encourage saving all work before going to sleep. Indeed, the drivers could be better (which is especially true for Win7). Greetz! M.T.
Similar Messages
-
The other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
JeanThe other evening we had a storm and lightening hit a house a few doors from me. It jolted my chair but that seemed to be all here. I use my laptop most of the time but since there was a software download I went to my 27 inch iMac and could not wake it from sleep. The light on the keyboard is not lit either. I have this connected to a Battery Backup Power so do not know what has happened or what to do. When I push the power button to try to turn it on nothing happens. There is no shound, no video, nothing; however the disk drive that does my time maching backup has a light on it and the other things that are plugged into the battery power pack also have lights on them. The printer is on and says it is ready to print. Since I cannot boot it up I do not know what to do to even try to get it started. I did not know what would happen if I put the first start up disk in the external disk drive and try that or not. The internal drive is broken. I do not have any repair shops or apple stores around me at all less than 150 miles away and I am disabled with 24/7 help and oxygen so can not take it in. Are there any suggestions that anyone can give me. I have not been able to find any way to reset the backup battery pack either. It is a Tripp-Lite. Any help anyone can give will be greatly appreciated. Thanking you in advance for your time and trouble.
Jean -
New y580 will sleep but not wake
Hello,
I just received my new y580 today and it would seem every time it goes to sleep, I can't wake it up. The blinking power button glowscontinuously a after I press it but the screen is black and no activity. I tried everything I could think of but hard reset is the only option. Any help is appreciated.
Thanks,
Ron
P.s. it was like that out of the box. I have not installed any software.
Solved!
Go to Solution.The initial call was made at about 9:15 AM PDT 8/16/12 and I did not make note of the rep's name. After suggesting I disable sleep mode in power settings, he took my contact information and the call ended.
I made another call to support at 7:30 PM PDT and spoke with Rachael. We engaged in a remote control session checking various settings. Since this is a 2-day old computer and nothing to lose, she concluded a OKR to factory restore was the best option. I had to interrupt the call to attend a family matter.
Next call to support at 10:30 PM PDT, I spoke with Jessie. He reviewed the information recorded by the previous support reps and walked me through the OKR process. Once it began, he instructed me to let it complete, reboot, walk through initial setup, and try waking from sleep again before installing any software. The call ended.
The recovery process completed successfully in about 15 minutes. I started the computer up and went through the initial setup procedure, allowed the computer time to fully start up, and idle. I put the computer to sleep but sadly, the problem still exists. I could not wake the computer and had to hard-reset.
Next call to support at about 10:55 PM PDT, I spoke with Joe. He informed me I had a couple choices. I could send the computer out for warranty repair or since it was so new, I could send it back to Lenovo for exhange or refund and gave me the appropriate contact information which I will follow up on tomorrow.
I am rather disappointed that this type of hardware issue could make it past QA and into the customer's hands. But with the exception of the first representative to whom I spoke, I would like to extend my gratitude to all the customer support reps mentioned above for their help. I will keep my fingers crossed that the next computer works as it should.
Ron -
I have a iphone3GS. It could not be boot up. When i press the sleep/wake button, the apple logo appear and then disappear. The password login screen didnt' come on. When i tried to connect my phone to the itune on my laptop, there isnt this button that i can sync my phone with the laptop.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg -
Could Not Sign In to App Store from iPad
I am unable to sign into the App Store from both my iPad Air and my iPhone 4.
When I enter the password, the following error message appears:
Could Not Sign In
FATAL::Unable to process your request. Please try again.
I have reset the password via the Apple web site and can sign in to the web site with no issues. (evidnced by ability to post this).
I have reset the iPad and no change.
Get same error in iTunes Store.
Any suggestions would be appreciated.
Thank you,
TimReset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections -
MBP does not wake after closing lid
MBP does not wake a when I open the lid,
I have the same problem.
In Leopard I could hit esc a couple of times and it would restore the display. In Lion no matter what I try nothing works except a total power down and reboot.
I can hear the hard drive searching around but no screen. -
While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.
Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally. -
Could not create a new connection in STRUTS
Hi,
I have done a application in STRUTS using JBOSS as application server, IDE myeclipse, database is MYSQL, current while executing the application at the time of connecting the database it is giving the error as 'could not create a connection ; nested throwable i have given below the server console message can anybody help in this regard to solve this issue.
Thanks
12:37:14,950 INFO [Server] Starting JBoss (MX MicroKernel)...
12:37:14,966 INFO [Server] Release ID: JBoss [Zion] 4.0.3SP1 (build: CVSTag=JBoss_4_0_3_SP1 date=200510231751)
12:37:14,981 INFO [Server] Home Dir: F:\vln\jboss-4.0.3
12:37:14,981 INFO [Server] Home URL: file:/F:/vln/jboss-4.0.3/
12:37:14,981 INFO [Server] Patch URL: null
12:37:14,981 INFO [Server] Server Name: default
12:37:14,981 INFO [Server] Server Home Dir: F:\vln\jboss-4.0.3\server\default
12:37:14,981 INFO [Server] Server Home URL: file:/F:/vln/jboss-4.0.3/server/default/
12:37:14,981 INFO [Server] Server Temp Dir: F:\vln\jboss-4.0.3\server\default\tmp
12:37:14,981 INFO [Server] Root Deployment Filename: jboss-service.xml
12:37:15,809 INFO [ServerInfo] Java version: 1.5.0_05,Sun Microsystems Inc.
12:37:15,809 INFO [ServerInfo] Java VM: Java HotSpot(TM) Client VM 1.5.0_05-b05,Sun Microsystems Inc.
12:37:15,809 INFO [ServerInfo] OS-System: Windows XP 5.1,x86
12:37:16,919 INFO [Server] Core system initialized
12:37:19,591 INFO [Log4jService$URLWatchTimerTask] Configuring from URL: resource:log4j.xml
12:37:50,544 INFO [EJB3Deployer] Default persistence.properties: {hibernate.transaction.flush_before_completion=false, hibernate.jndi.java.naming.factory.url.pkgs=org.jboss.naming:org.jnp.interfaces, hibernate.transaction.auto_close_session=false, hibernate.jndi.java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory, hibernate.cache.provider_class=org.hibernate.cache.HashtableCacheProvider, hibernate.transaction.manager_lookup_class=org.hibernate.transaction.JBossTransactionManagerLookup, hibernate.dialect=org.hibernate.dialect.HSQLDialect, hibernate.query.factory_class=org.hibernate.hql.ast.ASTQueryTranslatorFactory, hibernate.hbm2ddl.auto=create-drop, hibernate.connection.datasource=java:/DefaultDS, hibernate.connection.release_mode=after_statement}
12:37:50,653 INFO [SocketServerInvoker] Invoker started for locator: InvokerLocator [socket://169.254.109.142:3873/0.0.0.0:3873]
12:38:23,387 INFO [AspectDeployer] Deployed AOP: file:/F:/vln/jboss-4.0.3/server/default/deploy/ejb3-interceptors-aop.xml
12:38:43,294 INFO [WebService] Using RMI server codebase: http://madhu:8083/
12:38:44,981 INFO [TreeCache] setting cluster properties from xml to: UDP(ip_mcast=true;ip_ttl=64;loopback=false;mcast_addr=228.1.2.3;mcast_port=45551;mcast_recv_buf_size=80000;mcast_send_buf_size=150000;ucast_recv_buf_size=80000;ucast_send_buf_size=150000):PING(down_thread=false;num_initial_members=3;timeout=2000;up_thread=false):MERGE2(max_interval=20000;min_interval=10000):FD(down_thread=true;shun=true;up_thread=true):VERIFY_SUSPECT(down_thread=false;timeout=1500;up_thread=false):pbcast.NAKACK(down_thread=false;gc_lag=50;max_xmit_size=8192;retransmit_timeout=600,1200,2400,4800;up_thread=false):UNICAST(down_thread=false;min_threshold=10;timeout=600,1200,2400;window_size=100):pbcast.STABLE(desired_avg_gossip=20000;down_thread=false;up_thread=false):FRAG(down_thread=false;frag_size=8192;up_thread=false):pbcast.GMS(join_retry_timeout=2000;join_timeout=5000;print_local_addr=true;shun=true):pbcast.STATE_TRANSFER(down_thread=false;up_thread=false)
12:38:45,059 INFO [TreeCache] setEvictionPolicyConfig(): [config: null]
12:38:45,091 WARN [TreeCache] No transaction manager lookup class has been defined. Transactions cannot be used
12:38:45,169 INFO [TreeCache] interceptor chain is:
class org.jboss.cache.interceptors.CallInterceptor
class org.jboss.cache.interceptors.LockInterceptor
class org.jboss.cache.interceptors.CacheLoaderInterceptor
class org.jboss.cache.interceptors.UnlockInterceptor
class org.jboss.cache.interceptors.ReplicationInterceptor
class org.jboss.cache.interceptors.CacheStoreInterceptor
12:38:45,419 INFO [TreeCache] cache mode is REPL_SYNC
12:38:46,559 INFO [STDOUT]
GMS: address is MADHU:1860
12:38:48,606 INFO [TreeCache] state could not be retrieved (must be first member in group)
12:38:48,606 INFO [LRUPolicy] Starting eviction policy using the provider: org.jboss.ejb3.cache.tree.StatefulEvictionPolicy
12:38:48,606 INFO [LRUPolicy] Starting a eviction timer with wake up interval of (secs) 1
12:38:48,606 INFO [TreeCache] new cache is null (maybe first member in cluster)
12:38:48,637 INFO [TreeCache] viewAccepted(): new members: [MADHU:1860]
12:38:48,934 INFO [TreeCache] setting cluster properties from xml to: UDP(ip_mcast=true;ip_ttl=2;loopback=false;mcast_addr=228.1.2.3;mcast_port=43333;mcast_recv_buf_size=80000;mcast_send_buf_size=150000;ucast_recv_buf_size=80000;ucast_send_buf_size=150000):PING(down_thread=false;num_initial_members=3;timeout=2000;up_thread=false):MERGE2(max_interval=20000;min_interval=10000):FD(down_thread=true;shun=true;up_thread=true):VERIFY_SUSPECT(down_thread=false;timeout=1500;up_thread=false):pbcast.NAKACK(down_thread=false;gc_lag=50;max_xmit_size=8192;retransmit_timeout=600,1200,2400,4800;up_thread=false):UNICAST(down_thread=false;min_threshold=10;timeout=600,1200,2400;window_size=100):pbcast.STABLE(desired_avg_gossip=20000;down_thread=false;up_thread=false):FRAG(down_thread=false;frag_size=8192;up_thread=false):pbcast.GMS(join_retry_timeout=2000;join_timeout=5000;print_local_addr=true;shun=true):pbcast.STATE_TRANSFER(down_thread=false;up_thread=false)
12:38:48,966 INFO [TreeCache] setEvictionPolicyConfig(): [config: null]
12:38:58,528 INFO [MailService] Mail Service bound to java:/Mail
12:39:04,981 INFO [NamingService] Started jndi bootstrap jnpPort=1099, rmiPort=1098, backlog=50, bindAddress=/0.0.0.0, Client SocketFactory=null, Server SocketFactory=org.jboss.net.sockets.DefaultSocketFactory@ad093076
12:39:05,106 INFO [DefaultPartition] Initializing
12:39:05,200 INFO [STDOUT]
GMS: address is MADHU:2004 (additional data: 20 bytes)
12:39:07,216 INFO [DefaultPartition] Number of cluster members: 1
12:39:07,216 INFO [DefaultPartition] Other members: 0
12:39:07,216 INFO [DefaultPartition] Fetching state (will wait for 30000 milliseconds):
12:39:07,512 INFO [HANamingService] Started ha-jndi bootstrap jnpPort=1100, backlog=50, bindAddress=/0.0.0.0
12:39:07,528 INFO [DetachedHANamingService$AutomaticDiscovery] Listening on /0.0.0.0:1102, group=230.0.0.4, HA-JNDI address=169.254.109.142:1100
12:39:09,591 INFO [TreeCache] interceptor chain is:
class org.jboss.cache.interceptors.CallInterceptor
class org.jboss.cache.interceptors.LockInterceptor
class org.jboss.cache.interceptors.UnlockInterceptor
class org.jboss.cache.interceptors.ReplicationInterceptor
12:39:09,606 INFO [TreeCache] cache mode is REPL_SYNC
12:39:09,653 INFO [STDOUT]
GMS: address is MADHU:2034
12:39:11,669 INFO [TreeCache] state could not be retrieved (must be first member in group)
12:39:11,669 INFO [LRUPolicy] Starting eviction policy using the provider: org.jboss.cache.eviction.LRUPolicy
12:39:11,669 INFO [LRUPolicy] Starting a eviction timer with wake up interval of (secs) 5
12:39:11,669 INFO [TreeCache] viewAccepted(): new members: [MADHU:2034]
12:39:11,669 INFO [TreeCache] new cache is null (maybe first member in cluster)
12:39:18,497 INFO [Embedded] Catalina naming disabled
12:39:21,294 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on http-0.0.0.0-8080
12:39:21,309 INFO [Catalina] Initialization processed in 2656 ms
12:39:21,309 INFO [StandardService] Starting service jboss.web
12:39:21,325 INFO [StandardEngine] Starting Servlet Engine: Apache Tomcat/5.5
12:39:21,512 INFO [StandardHost] XML validation disabled
12:39:21,637 INFO [Catalina] Server startup in 328 ms
12:39:23,200 INFO [TomcatDeployer] deploy, ctxPath=/invoker, warUrl=.../deploy/http-invoker.sar/invoker.war/
12:40:12,434 INFO [WebappLoader] Dual registration of jndi stream handler: factory already defined
12:40:16,966 INFO [TomcatDeployer] deploy, ctxPath=/ws4ee, warUrl=.../tmp/deploy/tmp44694jboss-ws4ee-exp.war/
12:40:17,481 INFO [TomcatDeployer] deploy, ctxPath=/, warUrl=.../deploy/jbossweb-tomcat55.sar/ROOT.war/
12:40:17,856 INFO [TomcatDeployer] deploy, ctxPath=/jbossmq-httpil, warUrl=.../deploy/jms/jbossmq-httpil.sar/jbossmq-httpil.war/
12:40:18,450 INFO [TomcatDeployer] deploy, ctxPath=/web-console, warUrl=.../deploy/management/console-mgr.sar/web-console.war/
12:40:23,731 INFO [TreeCache] setting cluster properties from xml to: UDP(ip_mcast=true;ip_ttl=8;loopback=false;mcast_addr=230.1.2.7;mcast_port=45577;mcast_recv_buf_size=80000;mcast_send_buf_size=150000;ucast_recv_buf_size=80000;ucast_send_buf_size=150000):PING(down_thread=false;num_initial_members=3;timeout=2000;up_thread=false):MERGE2(max_interval=20000;min_interval=10000):FD_SOCK:VERIFY_SUSPECT(down_thread=false;timeout=1500;up_thread=false):pbcast.NAKACK(down_thread=false;gc_lag=50;max_xmit_size=8192;retransmit_timeout=600,1200,2400,4800;up_thread=false):UNICAST(down_thread=false;min_threshold=10;timeout=600,1200,2400;window_size=100):pbcast.STABLE(desired_avg_gossip=20000;down_thread=false;up_thread=false):FRAG(down_thread=false;frag_size=8192;up_thread=false):pbcast.GMS(join_retry_timeout=2000;join_timeout=5000;print_local_addr=true;shun=true):pbcast.STATE_TRANSFER(down_thread=true;up_thread=true)
12:40:23,747 INFO [TreeCache] interceptor chain is:
class org.jboss.cache.interceptors.CallInterceptor
class org.jboss.cache.interceptors.LockInterceptor
class org.jboss.cache.interceptors.UnlockInterceptor
class org.jboss.cache.interceptors.ReplicationInterceptor
12:40:23,747 INFO [TreeCache] cache mode is REPL_ASYNC
12:40:24,184 INFO [STDOUT]
GMS: address is MADHU:2576
12:40:26,184 INFO [TreeCache] viewAccepted(): new members: [MADHU:2576]
12:40:26,184 INFO [TreeCache] new cache is null (maybe first member in cluster)
12:40:26,184 INFO [TreeCache] state could not be retrieved (must be first member in group)
12:40:27,794 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-ha-local-jdbc.rar
12:40:28,231 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-ha-xa-jdbc.rar
12:40:28,559 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-local-jdbc.rar
12:40:28,934 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jboss-xa-jdbc.rar
12:40:29,325 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/jms/jms-ra.rar
12:40:29,762 INFO [RARDeployment] Required license terms exist, view META-INF/ra.xml in .../deploy/mail-ra.rar
12:40:34,544 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS'
12:40:36,762 INFO [A] Bound to JNDI name: queue/A
12:40:36,778 INFO Bound to JNDI name: queue/B
12:40:36,778 INFO [C] Bound to JNDI name: queue/C
12:40:36,778 INFO [D] Bound to JNDI name: queue/D
12:40:36,778 INFO [ex] Bound to JNDI name: queue/ex
12:40:36,856 INFO [testTopic] Bound to JNDI name: topic/testTopic
12:40:36,872 INFO [securedTopic] Bound to JNDI name: topic/securedTopic
12:40:36,872 INFO [testDurableTopic] Bound to JNDI name: topic/testDurableTopic
12:40:36,872 INFO [testQueue] Bound to JNDI name: queue/testQueue
12:40:37,044 INFO [UILServerILService] JBossMQ UIL service available at : /0.0.0.0:8093
12:40:37,200 INFO [DLQ] Bound to JNDI name: queue/DLQ
12:40:37,903 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA'
12:40:38,262 INFO [ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=MySqlDS' to JNDI name 'java:MySqlDS'
12:40:38,512 INFO [TomcatDeployer] deploy, ctxPath=/EIISWEB, warUrl=.../deploy/EIISWEB.war/
12:40:39,622 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.util.LocalStrings', returnNull=true
12:40:39,637 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.action.ActionResources', returnNull=true
12:40:40,731 INFO [PropertyMessageResources] Initializing, config='com.lsil.struts.ApplicationResources', returnNull=true
12:40:40,747 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.action.ActionResources', returnNull=true
12:40:40,856 INFO [PropertyMessageResources] Initializing, config='com.lsil.struts.ApplicationResources', returnNull=true
12:40:41,106 INFO [TomcatDeployer] deploy, ctxPath=/jmx-console, warUrl=.../deploy/jmx-console.war/
12:40:41,700 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-0.0.0.0-8080
12:40:42,216 INFO [ChannelSocket] JK: ajp13 listening on /0.0.0.0:8009
12:40:42,356 INFO [JkMain] Jk running ID=0 time=0/234 config=null
12:40:42,372 INFO [Server] JBoss (MX MicroKernel) [4.0.3SP1 (build: CVSTag=JBoss_4_0_3_SP1 date=200510231751)] Started in 3m:27s:391ms
12:41:21,684 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,700 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.util.LocalStrings', returnNull=true
12:41:21,731 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,809 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,809 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,825 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:21,825 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.bean.LocalStrings', returnNull=true
12:41:21,919 INFO [PropertyMessageResources] Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
12:41:31,262 INFO [STDOUT] In ServiceLocator: creating datasource
12:41:31,262 INFO [STDOUT] Referencejava:MySqlDS
12:41:31,262 INFO [STDOUT] [email protected]9
12:41:31,419 WARN [JBossManagedConnectionPool] Throwable while attempting to get a new connection: null
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis)
at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnection(LocalManagedConnectionFactory.java:164)
at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.createConnectionEventListener(InternalManagedConnectionPool.java:519)
at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.getConnection(InternalManagedConnectionPool.java:208)
at org.jboss.resource.connectionmanager.JBossManagedConnectionPool$BasePool.getConnection(JBossManagedConnectionPool.java:529)
at org.jboss.resource.connectionmanager.BaseConnectionManager2.getManagedConnection(BaseConnectionManager2.java:410)
at org.jboss.resource.connectionmanager.TxConnectionManager.getManagedConnection(TxConnectionManager.java:342)
at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:462)
at org.jboss.resource.connectionmanager.BaseConnectionManager2$ConnectionManagerProxy.allocateConnection(BaseConnectionManager2.java:894)
at org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:73)
at com.lsil.eiis.validator.main.common.QueryManager.getInfo(QueryManager.java:65)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.lsil.eiis.utility.XMLDTHttpServlet.getInfo(XMLDTHttpServlet.java:186)
at com.lsil.eiis.utility.XMLDTHttpServlet.doGet(XMLDTHttpServlet.java:44)
at com.lsil.eiis.utility.XMLDTHttpServlet.doPost(XMLDTHttpServlet.java:121)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:159)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis
at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.getDriver(LocalManagedConnectionFactory.java:291)
at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnection(LocalManagedConnectionFactory.java:153)
... 37 more
12:41:32,403 INFO [STDOUT] Help XML:<Data><Record><RESULT>Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Apparently wrong driver class specified for URL: class: com.mysql.jdbc.Driver, url: jdbc:mysql://localhost:3306/eis))</RESULT></Record></Data>Hi Abhshek,
Please go through the link:Error in Seeburger SFTP : Cannot create pending keystore PENDING/SSH_hosts
Also check certificate expiry date. Take help of basis team so that they could be able to assist you regarding this.
Regards,
Naveen -
I am trying to download music on to my 4th gen Ipod touch but it keeps saying that It is unable to download song/ could not download at this time. Can anyone tell me how to download my music?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... (But can take Longer..)
Release the Buttons... -
ITunes cannot sync... apps installed on the iPhone could not be determined.
I am trying to activate an original iPhone. I keep running into issues (partially because the rest of the world is activating 4Gs phones). I would appreciate any help that is available.
I am working on a MacBook running OSX 10.5.8. My iTunes has been updated- 10.5.
I am currently getting a message- iTunes cannot sync apps to the iPhone “MRL iphone” because the apps installed on the iPhone could not be determined. The iphone screen shows the usb cord/plug pointing to the itunes logo whether attached to a computer or not. And says slide for emergency use.
-I have restored to factory settings several times both from a previous backup and set up as new phone.
-I have even attempted to use another Mac and a family member's windows machine with similar results on all.
-I have uninstalled and reinstalled iTunes
-I have put the phone into the recovery mode and restored from there
-I have restarted both the computer and phone numerous times
-I have replace the SIM card with a new card from the provider
-I have received an email saying the phone was activated (and have called to verify with the service provider)
I'm sure there are other things I have tried as well that I am forgetting, as I have been at this now for about 3days. There have been times when I got nothing but a breif "accessing iTunes store" and then a white screen with the grey word iPhone in the middle. At least now I have the normal summary screen when clicking on the device. Unfortunately I am still getting an error "iTunes cannot sync apps to the iPhone “MRL iphone” because the apps installed on the iPhone could not be determined." I am not attempting to sync apps, just sync the phone to get a current/clean backup. I will want to sync the apps, just haven't been able to get that far.
By the way, prior to starting this process the iphone worked perfectly- no issues. This just seems to have become an issue when I attempted to restore to factory settings for a clean start with the new line.
This is the furthest I have been able to get in the process. I really need to get this up and running soon as I will need the phone for the work week.
Please help!Not sure if this is a solution or not but it seemed to work for me. Simply restart your iphone.
From the iphone troubleshooting page
To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears. -
IPhone 4S could not be activated because the activation server is temporarily unavailable
If you got the "scary" message that you could not activate iPhone 4S neither by Wi-Fi or iTunes, I want to share my experience:
I decided to reset my iPhone 4S, and used "Erase All Content and Settings" under the reset menu (Settings/General/Reset), I was hoping that the erasing just does that, but for me the nightmare started!
I was taken to the activation screens, and begun with the welcome one, choose language, choose location services (later on it also disappears) and selecting Wi-Fi and/or iTunes for activation.
I chose a Wi-Fi network the process started, and gave me a message that it will take about three minutes to activate iPhone, few minutes later a screen with this message appears: "Your iPhone could not be activated because the activation server is temporarily unavailable."
Then, I decided to try the activation using iTunes…
Using iTunes, after few minutes, it shows the following message: "We could not complete your iTunes Store request. The iTunes Store is temporarily unavailable. Please try again later."
I tried several times in both ways, trying 4 different Wi-Fi networks and 3 different computers in the whole process, and I was going desperate! I started to find out some info about this trouble over the Internet, and guess what? I was not alone! But I did not find any answer or solution either!
Finally, I joined Apple Support Communities, and started searching with no good luck at all, until I found (many hours later) this old (2009) solution:
+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
(THANKS A LOT!!! modular747 and Easily Easy, you saved me!!!)
Then I suggest everyone to use this, of course it will erase everything, but you may be able to recover your data from your last backup, or you can also choose to configure iPhone as a new cell phone.
The process took me about 92 minutes, but it was worth it, now I own an unlocked iPhone 4S (it was an AT&T when I purchased from Apple Store in November) and is working perfectly!
Hope it is useful for all of you facing this trouble!
Good luck and enjoy your iPhone then!I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
However to my disappointment, landed back at the same status which says
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care
I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
Guys ... Need the data desperately ... Can anybody please help??? -
Hi
I have an iPad mini and it was on iOS 6.1.3, my friend came and he said that he knows how to install iOS 7 for me. I gave it to him and he tried to install it, but apparently he failed to do so and an "Activation Error" is appearing on the screen now asking me to register in the developers program.
Now, we are trying to restore it back to iOS 6.1.3 using iTunes, the software downloads well and it starts restoring but that I keep getting this error message "The iPad could not be restored because the firmware file was corrupt.".
I am sure that the file is not corrupted because it's downloaded via iTunes regular download and it's not from an outside source.
I am stuck with this now and my iPad is useless this way.
Please any suggestions ?basselsamo wrote:
Please any suggestions ?
Yes, don't download Beta Software that you have no business or legal right to download and quit taking bad advice from friends.
Now to maybe get you out of the restoring jam, the only thing that I can think of that might work is to use recovery mode, unless you already tried it and it didn't work.
You can read about it here, but the instructions are posted below.
http://support.apple.com/kb/ht4097
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
The backup volume could not be found
Spent a fair amount of time on the phone with Apple last night trying to get my Macbook Air to work with Time Machine/Time Capsule.
Symptoms of my problem included Time Machine Preferences giving the error "The backup volume could not be found"
Console messages complaining about not being able to find the MAC address for machine:
(console is accessed by clicking Go -> Utilities -> Console from the Finder, and then selecting All Messages)
11/7/08 11:06:13 AM System Preferences[123] *Time Machine failed to get MAC address for machine.*
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Starting standard backup
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Network mountpoint /Volumes/Time Capsule not owned by backupd... remounting
11/7/08 11:13:09 AM kernel AFP_VFS afpfs_mount: /Volumes/Time Capsule-1, pid 1604
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Network volume mounted at: /Volumes/Time Capsule-1
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] *Volume at path /Volumes/Time Capsule-1 does not appear to be the correct backup volume for this computer. (Cookies do not match)*
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Backup requested due to disk attach
11/7/08 11:13:14 AM /System/Library/CoreServices/backupd[1603] *Backup failed with error: 18*
And my only network interface was showing up as en1 (instead of en0). You can check this by using Network Utilities:
- On the Finder main menu bar click Go -> Utilities -> Network Utilities
If "Network Interface (en0)" is not an option in the drop down list under "Please select a network interface for information" (mine was showing as en1), then the following steps will probably solve your problem:
1) Enable the root user
- Open the finder
- On the Finder main menu bar click Go -> Utilities -> Directory Utility
- On the menu bar click Edit -> Enable Root User
- set a password (they suggested using the same password as is used for the main user account)
2) Login as the newly enabled root user
- Click Log Out... from the Apple menu on the main menu bar
- select "Other" at the login screen
- enter the user name "root" and the password you set in step 1
3) Drag Preferences folder to the desktop
- open the finder, and click on Macintosh HD and then Library
- drag the Preferences folder onto the desktop
4) Restart the computer
- Click Restart from the Apple menu on the main menu bar
After this, the Network utility should show "Network Interface (en0)", and Time Machine should work.Jackson,
See this article for the reasons why you see "Time Capsule-1 does not appear to be the right volume..."
[http://discussions.apple.com/thread.jspa?messageID=8116036�]
As for the error message you are getting, here are several reasons why you would see this message...
*_"Backup Volume Could Not Be Found"_*
First, it is important to distinguish this error message from another, similar Time Machine error that states, “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
*Reselect Your Time Machine Disk*
(http://support.apple.com/kb/TS1329)
In the Finder, go up to the "Go" menu and select "Connect to Server".
Click the "Browse" button at the dialogue box.
In the Network window that opens, do you see your TM drive?
Double click it to mount the drive.
Now let's try to reselect it for Time Machine use.
Go to System Preferences --> Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your drive again.
Close System Preferences and try backing-up again.
On the other hand, does your Time Machine drive NOT appear at all? Is it appearing on your desktop? If it is still connected try disconnecting the cable, waiting a few seconds and then reconnecting the cable. Does the drive mount on the desktop? Try initiating a backup now.
*Disk Fails to Wake From Sleep*
“If your external HD has a sleep function that does not wake for Time Machine backups. Time Machine will alert you that "The backup volume could not be found", and backups will not be made.” [http://support.apple.com/kb/TS1337]
*3rd-Party Disk Utilities* #
Many external hard disks come with software for maintaining/monitoring hard disk activities. It may have come on a separate CD or been installed on the drive itself. If these programs have been installed they may interfere with Time Machine backups, generate erratic behavior, or cause the drive to ‘disappear’ altogether.
You may never know these applications are there as they may be running in the background. Go to System preferences --> Accounts. Select your account in the pane on the left. Click “Login Items”. Are there any items listed there that might refer to hard disk utilities. If so remove them using the “-” button at the bottom.
*Delete Time Machine Preference .plist*
It may be that the preference list that stores the name of your designated backup disk has become corrupted.
Go to --> Macintosh HD / Library / Preferences (Note: NOT Home / Library / Preferences).
Drag the .plist file labeled,
com.apple.TimeMachine.plist
to the root level of your Macs’ hard drive.
Reboot your computer.
This .plist file is automatically recreated at startup if it is missing.
Now try choosing the external HD in the TM Prefs for backup.
*Time Capsule Has a Long Name*
“When using your Time Capsule for Time Machine backups in Mac OS X 10.5 Leopard or later, the Time Capsule backup volume may not mount and Time Machine may not be able to back up to it. This alert may appear: "Backup volume cannot be found". This can happen if the Time Capsule disk has a long name. [http://support.apple.com/kb/HT1170]
Open AirPort Utility (in /Applications/Utilities).
Click your Time Capsule's icon.
Click "Manual Setup".
Enter the password for the Time Capsule if prompted.
Click the Disks icon.
Highlight the volume name that appears under "Time Capsule Disk".
In the Name field, enter a name for the volume that is less than 27 characters long.
Click Update.
After Time Capsule restarts, on the Mac(s)using Time Machine, open Time Machine preferences and reselect the Time Capsule volume.”
Let us know if any of these suggestions help.
Cheers! -
Dboraslib.dll - Error 126 : "The specified module could not be found."
Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 1 successfully loaded
shared lib "dw_xtc.dll" version 1 successfully loaded
shared lib "dw_stl.dll" version 1 successfully loaded
shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar -
Hello Expert,
Could you please let me know what things needs to be taken care for getting the gateway on track.
My dev_disp look
trc file: "dev_disp", trc level: 1, release: "700"
sysno 10
sid IDF
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 185
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 7592
Wed Oct 07 16:44:39 2009
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 7592) [dpxxdisp.c 1285]
shared lib "dw_xml.dll" version 185 successfully loaded
shared lib "dw_xtc.dll" version 185 successfully loaded
shared lib "dw_stl.dll" version 185 successfully loaded
shared lib "dw_gui.dll" version 185 successfully loaded
shared lib "dw_mdm.dll" version 185 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3910
Wed Oct 07 16:44:44 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0092.qqq.nxst) took 5 seconds
Wed Oct 07 16:44:55 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 11 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5418]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MB5SAP1002_IDF_10 <
DpShMCreate: sizeof(wp_adm) 22784 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F0B0050, size: 6607008)
DpShMCreate: allocated sys_adm at 000000000F0B0050
DpShMCreate: allocated wp_adm at 000000000F0B21F0
DpShMCreate: allocated tm_adm_list at 000000000F0B7AF0
DpShMCreate: allocated tm_adm at 000000000F0B7B50
DpShMCreate: allocated wp_ca_adm at 000000000F65B3D0
DpShMCreate: allocated appc_ca_adm at 000000000F6611D0
DpShMCreate: allocated comm_adm at 000000000F663110
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F6E9DA0
DpShMCreate: allocated gw_adm at 000000000F6E9E20
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F6E9E50
DpShMCreate: allocated wall_adm at 000000000F6E9E60
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1692]
***LOG Q0K=> DpMsAttach, mscon ( MB5SAP1002) [dpxxdisp.c 12429]
DpStartStopMsg: send start message (myname is >MB5SAP1002_IDF_10 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 185
Release check o.K.
Wed Oct 07 16:44:57 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Wed Oct 07 16:45:35 2009
*** ERROR => gateway (pid 3372) died [dpxxdisp.c 16420] *
DpGwCheck: appc_adm.stat = 2
h1 *** DP_FATAL_ERROR => Gateway could not be started - I better exit now h1
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives (PID:3516 HANDLE:420)
killing W0-3516 (SIGUSR2)
killing W12-13908 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 07 16:45:45 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Oct 07 11:15:45 2009
========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
6
2000
350
350
--------++++--
+
DIA
0
7
2000
93
93
--------++++--
+
UPD
0
1
2000
1
1
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
1
2000
18
18
--------++++--
+
SPO
0
2
2000
3
3
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 284
wake_evt_udp_now 0
wake events total 449, udp 439 ( 97%), shm 10 ( 2%)
since last update total 449, udp 439 ( 97%), shm 10 ( 2%)
Workprocess Comm. Area Blocks Wed Oct 07 11:15:45 2009
=============================
Slots: 300, Used: 0, Max: 3
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=453
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 07 16:45:50 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >MB5SAP1002_IDF_10 < (normal)
DpJ2eeDisableRestart
read msgserver-list from MBUF
DpMBufMod: name [MB5SAP1002_IDF_10 ], types 191 state 3 (0x0 0x0 0x0 0x0)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 0/300/13
LOCK WP ca_blk 0
make DISP owner of wp_ca_blk 0
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 285)
MBUF server state SHUTDOWN
DpModState: change state ACTIVE -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
AdCvtRecToExt: opcode 21 (AD_RZL_STRG), ser 0, ex 0, errno 0
AdCvtRecRzlStrgToExt TY 32, NL 20, VO 0, VL 40, NA SAPMSSY6_LB
AdCvtRecRzlStrgToExt VAL MB5SAP1002_IDF_10
eyec AD-EYECATCH vers 1 type AD_REQUEST rec_size 104 rec_no 1
R# Op S# Ex Er | Data
+------
0 21 0 0 0 |
AdCvtRecToInt: opcode 21 (AD_RZL_STRG), ser 0, ex 0, errno 0
AdCvtRecRzlStrgToInt TY 32, NL 20, VO 0, VL 40, NA SAPMSSY6_LB
AdCvtRecRzlStrgToInt VAL MB5SAP1002_IDF_10
AdCvtRecToExt: opcode 21 (AD_RZL_STRG), ser 0, ex 1, errno 0
AdCvtRecRzlStrgToExt TY 32, NL 20, VO 0, VL 40, NA SAPMSSY6_LB
AdCvtRecRzlStrgToExt VAL MB5SAP1002_IDF_10
eyec AD-EYECATCH vers 1 type AD_REPLY rec_size 104 rec_no 1
R# Op S# Ex Er | Data
+------
0 21 0 1 0 |
DpTriggerAutoabap: trigger auto abap (only load balance)
DpTriggerAutoabap: add to ad storage : >SAPMSSY6_LB < >MB5SAP1002_IDF_10 <
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 286)
DpModState: change server state from ACTIVE to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[[DpWpDied] W12 died (PID:13908 HANDLE:356)
Stop icman
killing process (8668) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of icman
[DpProcDied] Process died (PID:8668 HANDLE:428)
DpStartStopMsg: send stop message (myname is >MB5SAP1002_IDF_10 <)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Oct 07 16:45:57 2009
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12775]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 348 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 348 (pos=2)
SiSelNRemove: removed sock 348
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 289)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 348
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 7592) [dpxxdisp.c 10973]
Good Bye .....
I have also enter the parameter to ignore the gateway error rdisp/xxxx . It worked fine. But now i am updating the spam and getting RFC communication error and does not work due to gateway issue.
dev_rd
trc file: "dev_rd", trc level: 1, release: "700"
Wed Oct 07 16:44:55 2009
***LOG S00=> GwInitReader, gateway started ( 3372) [gwxxrd.c 1757]
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 183
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3372
gateway runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
gateway (version=700.2008.06.23)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
***LOG Q0I=> NiIBindSocket: bind (10013: WSAEACCES: Permission denied) [nixxi.cpp 3227]
ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 584
(SI_EPORT_INUSE/10013; I4; ST; 0.0.0.0:3310) [nixxi.cpp 3227]
LOCATION SAP-Gateway on host MB5SAP1002 / sapgw10
ERROR service '0.0.0.0:3310' in use
TIME Wed Oct 07 16:44:55 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -4
MODULE nixxi.cpp
LINE 3227
DETAIL NiIBindSocket
SYSTEM CALL bind
ERRNO 10013
ERRNO TEXT WSAEACCES: Permission denied
COUNTER 1
ERROR => GwInitService: GwListen failed, rc: -4 [gwxxrd.c 10415]
***LOG S10=> GwInitReader, GwInitService () [gwxxrd.c 1985]
ERROR => ShmDelete: Invalid shared memory Key=21. [shmnt.c 719]
ERROR => ShmCleanup: ShmDelete failed for Key:21. [shmnt.c 793]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
Any idea of the cause and how do I rectify it.
Thanks
PrashI checked on the server with the following command
C:\>niping -c -H MB5SAP1002 -L 3600 -D 1000
Wed Oct 07 19:53:21 2009
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [
nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 880
(SI_ECONN_REFUSE/10061; I4; ST; 10.204.86.7:3298) [nixxi.cpp 2823]
ERROR => NiTClientLoop: NiHandle (rc=-10) [nixxtst.cpp 2839]
ERROR partner '10.204.86.7:3298' not reached
TIME Wed Oct 07 19:53:21 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
Maybe you are looking for
-
Is Appoval Process for Standard Target possible in 11.1.2.1
Hi All, We are testing Workflow Approval process in 11.1.2.1 The idea is to get a Free Flow approval process to work for a Standard Target Version member. So, we created 2 members in the Version dimension; 1) Working - Standard Target 2) BU_Ver - Bot
-
How to Write Off Vendor Consignment Stock
Hi Guys I was wondering if anyone could help me with an issue we have with Vendor Consignment Stock. There is a situation where there is stock sitting in Vendor Consignment Stock which is damaged and thus not returnable. This stock is thrown away int
-
BT have reset my usage monitor part way through th...
I was posting a month or so ago similar to others, that suddenly my broadband usage had dramatically increased without me having changed what I'm doing online, so I've been monitoring it closely. I've managed to keep it down for the last few months s
-
Why can my sms not be opened on a blackbery?
I've sent a number of messages to blackberries ocally and overseas, they get a notification that they have received an SMS but can't see the message.
-
How to find password for Adobe Updater?
So yesterday I renewed my Photoshop subscription but I'm still not able to open up Photoshop because it says that I need to update adobe (and possibly re-download PS? I'm not even sure). I tried to update adobe but then before it started to initializ