Could not write file .project

Hi, i need help.
I have a lot of components in a workspace but when i want to
make a reference into them flexbuilder send me next error-messaje:
could not write file d:\......\.project
i have seen and this file is not an "only read" file, and i
have permission to write it...
I have also copy this proyect, and test it in other
computer...
Could you help me?
Thanks in advance

I have a flex 3 workspace with a lot of components
(libraries). I need to import one of this components(library 1)
from another one(library 2), to register a cairmgorn event in
library 2´s controller.
When i click with the rigtht button over library 2, and
select in the menu, properties option, then select proyect
references and then select library 1, when i press ok, flex send me
the error, "could not write file /library2.../.project"
because of that error when i restart my flexbuilder, no any
reference is in my library 2 component.
Also, if i try to select propertys, flex library build path,
and then library path tab, i add proyect and select library 1
component, flex let me select it, and press ok, but doesn't let me
use hes propertys and components, like i not doing anything, and
when i restart my flex builder, this library path has dissapear.
Thanks in advance.

Similar Messages

"Could not write file. OS Error (-5000)"

I upgraded to 10.4.8 today and started getting this error. I can't save any files. I've been unable to find anything on this error.
So far this is happening in GoLive.
Thanks.

oh, man, I can't believe I am saying this. Try Repairing Permission, with Disk Utility.

Media Encoder "Could not write XMP data in output file." issue

Greetings,
We have invested a great deal of money and time into a brand new editting system and we need some help with adobe media encoder. We are trying to export some of our projects and we keep getting the same error. Here is the entire log of errors:
Could not write XMP data in output file.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_6.prproj
- Output File: M:\acura_rooftop_43_draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:17:23
2/4/2010 1:42:28 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_7.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:02:09
2/4/2010 1:54:21 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_9.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:16:04
2/4/2010 2:19:49 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_10.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_HD_draft_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:01:38
2/4/2010 2:30:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_11.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:38
2/4/2010 3:19:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_12.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:01:08
2/4/2010 3:31:37 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_17.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:15:31
2/4/2010 4:21:06 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_19.prproj
- Output File: M:\GRAPHICS\cow_graphics\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:24
2/4/2010 5:16:54 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_16.prproj
- Output File: C:\Users\Ramius\Desktop\mxf.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:05:08
2/23/2010 12:12:40 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_18.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:04:00
2/23/2010 12:26:54 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_19.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:05:08
2/23/2010 12:51:01 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_23.prproj
- Output File: C:\Users\Ramius\Desktop\allhdtest2.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:04:20
2/23/2010 4:23:46 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_27.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:11
3/2/2010 3:21:19 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_28.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:00
3/2/2010 3:34:47 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_29.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_2.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:10:22
3/2/2010 4:41:03 PM : Encoding Failed
Error compiling movie.
Unknown error.
We absolutely need to fix this issue ASAP, we are in a major bind until we can resolve this issue. Thanks a bunch.

We are using Windows 7
dual quadcore intel xeon processors 8gb ram
10000rpm internal drives. quadroefx 1800 video card
The drive is 4tb
We have tried exporting to many different locations with no luck
Its a very nice video editting system. We just need to figure out this exporter

LabVIEW could not write the file back to disk (-2570)

Hello,
i use this MDF data storage plugin to write MDF files: mdf plugin
I created a project with some VI's like MDFOpen.vi, MDFClose.vi, MDFWriteDouble.vi, etc ...
I also created a Test VI which generates data at a specific rate (want to see performance) and write it to a MDF file. It works ....
Now I want to use this in C#. I compiled a LabView .Net DLL out of my MDF VI's and referenced it in Visual Studio. I can open a MDF File from C# and close it. But as soon as I write a double (actual content) into the MDF File I get an exception when I call MDFClose.vi from DLL. Obviously "Close Data Storage <APPEND>" from inside my MDFClose.vi returns error -2570: LabVIEW could not write the file back to disk. I have no idea why.
regards
Thomas

So I guess it's time to update this post for anyone who also have problems with MDF or Storage/DataPlugin VIs in general.
My task was to create a MDF Logger, so I needed to write MDF files. MDF4Lib from Vector mentioned in an above post can only read MDF files. ETAS is also selling an MDF Lib but there are reasons I don't want that. So why not use MDF Storage/DataPlugin from NI? I can tell you.
My MDF Logger is now finished and can create MDF files with groups and channels, just like TDMS, but ... when I write data in a loop and then finish by closing the MDF File/Reference it may happen that:
i get error LabVIEW could not write the file back to disk (-2570)
application crashes
both 1 and 2
If it does not crash or throw an error it succeeds finishing my MDF file correctly but next time I repeat this (without restarting application) I notice writing data takes longer than in first run and my memory is increasing. The more I repeat the longer it takes to write data to MDF and the more memory is increasing until it finally crashes. It also depends on how much data in how many groups/channels are written.
NI Support already got this and confirmed that with desktop execution tracekit you will see that with each call to a Storage/DataPlugin VI references are leaking. Those leaks are assumed to be the root cause of all that trouble. There is not bugfix but apparently one or more CAR's about this. So I guess this is not MDF specific but generally with Storage/DataPlugin.
My current only workaround is to close the app each time after I am done writing one MDF file. My future fix will be to implement MDF on my own.

Adobe Media Encoder Could not write XMP data in output file.

Hi there i have searched for this on the forums,
if there is a Thread on it please Link:)
This is my Encoding Log from Adobe Media ancoder,
(se Below).
im doing a projekt from Mts Files, in Premiere pro
i have Checked the box that no Xmp Data needs to be added, to the left from the Queue button in the export window.
Should i Delete all the Xmp in Bridge or somthing like that to Resolve this?
Regards
Jonas Dwight
Encoding Log:
- Source File: /Users/Blasuk/Library/Caches/TemporaryItems/Mogel_oe_2014_nyeste.prproj
- Output File: /Users/Blasuk/Desktop/Video_Projekts/Fremkaldte/Moegeloe2014-hq.mp4
- Preset Used: Custom
- Video: 1920x1080 (1,0), 25 fps, Upper, 01:18:52:10
- Audio: AAC, 320 kbps, 48 kHz, 5.1
- Bitrate: VBR, 2 pass, Target 15.00 Mbps, Max 41.30 Mbps
- Encoding Time: 11:05:14
01/05/2015 07:35:01 PM : File Encoded with warning
File importer detected an inconsistency in the file structure of Moegeloe2014-hq.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file.

Any help please?! Thank you!

Could not write to file: C:\Program Files (x86)\Adobe\Acrobat 7.0\ActiveX\AcroPDF.NOR. ?

Hi, I get this message (loosely translated from Swedish):
"Could not write to file: C:\Program Files (x86)\Adobe\Acrobat 7.0\ActiveX\AcroPDF.NOR.
Confirm that you have access to this file"
when I try to install Acrobat standard 7.0, and after several "retry" I cannot finish the installation.
Does anyone know why?
Thank you,
MIa

Appears that you are on a Win7, 64-bit machine. AA 7 has an issue with activation since the server no longer exists for AA 7. There is a separate install at Adobe to address this issue that might solve the problem temporarily (Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3). Even if you get AA 7 installed on Win7, you will have to do workarounds to make it work. Both the print driver (Adobe PDF) and AcroTray.exe fail on Win7 and they require workarounds to be able to even use AA 7. It is strongly recommended that you get AA XI at this point.

RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

Outbound Idoc processing fail with the following error:
Could not write IDoc to file
Message no. EA299
Diagnosis
The system could not convert data from the data record 000027.
Procedure
Check the port definition of the receiver port.
You can use the "Continue despite conversion error" option to write the IDoc to the file from transaction BD87 with replacement characters.
Short dump indicate that there is a some junk character in th e TPRI_DEF for program SAPLSPRI that it is unable to convert.
I have set the flag on the we21 port to "continue despite conversion error" and that seem to help, but I would like to figure out how to fix the junk characters from coming through from the TPRI_DEF table.
This is what shows up in the short dump after RSEOUT00 is run.
TPRI_DEF                                   / /       : :     00002932
    010GV21            \0\0\0\0\x0006āȂ耀㐱〲\0\0嬇\0ሟ鴂푎眩\x0802儔잏퉓
I do not see any entries for area "GV" in the table, there is one for "GF". which has no user assigned to it and it is of key version 21.
I am not sure if the table is supposed to have an entry with no user assigned?
thank you for looking at this issue .

HI Jurgen,
we have the same issue, chinese charecter is in PO text header. so facing error. If we click unicode format then it works fine as my testing in development.
I just want to knom what is the impact if i clicked directly unicode format ?( with refernce to your reply above " have you set the Unicode format flag directly above in WE21?" )
I doc is going from SAP sytem - (PO information )
Pls adivce..
waiting for your reply..
Thanks in advance

Could not write to the file. It may have been opened with insufficient ...

Cannot add item to keychain with the above error
Is there a solution?
An error has occured. Unable to add an item to the current keychain.
Could not write to the file. It may have been opened with insufficient access privileges

Is there any more background information that you care to add to help enlighten us?

Error of "Could not save (file name) because write access was not granted

Error of "Could not save (file name) because write access was not granted. The users are pulling the files from a Mountain Lion server. They all have read\write access. If they try to save the file in the same directory they get that error but they can save it anywhere else on the sharepoint. If they save it in another directory then reopen it make a change and do a save as they can save it back to the original directory. Has anyone else come across this same issues

It is an enterprise solution. I just do not see why you cant save directly to the server. It seems to get weird errors. Some Adobe stuff saves fine on the server and some of it doesnt. It seems Adobe related. The permissions on the server are set correctly so it isnt a permission error

Anybody Knows how to fix "Could not save file because write access was not granted?

I need a help how to fix message "Could not save file because write access was not granted"

Hi Silkrooster,
The operating System that I am using is an Imac Os x10.8.5.

Could not write to file C:/WINDOWS/system32/drivers/etc/services.SAPtmp

Hello!
During the installation of the Preview of the Netweaver 2004s (Java) i get in the phase "Install common system files" the following error messages.
ERROR 2006-06-28 14:12:13
FSL-02103 Could not write to file C:/WINDOWS/system32/drivers/etc/services.SAPtmp. Last operating system error message: Der Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen Prozess verwendet wird.
All parameters are the default one!
How could i solve this problem?
Nils

please reply...

"Could not write to configuration file" when config Publisher in admin tab

Hi guys,
I have install OBIEE 10.3.3.4 on an RH linux box (with OS user obiee) and Oracle Application Server 10.1.3.1 on the same box (with OS user oraias).
When I want to change some parameter in the admin tab of BI publisher (Administrator/Administrator as the login name/pass) and click "Apply",
I get the error "Could not write to configuration file". After I change the configuration properties to 777 the error is sitll there. And I also try to change the SECURITY MODEL to XDO, but still no use.
I made a test, for example, when I change something in admin--JDBC--Oracle BIEE and then apply, I got the error. If I update xmlp/DataSource/datasources.xml manually, the change can be seen after I reopen the page admin--JDBC--Oracle BIEE. That means I find the correct file and the file access properties is ok.
For other parameters such as Scheduler Configuration, I got the same error when apply. But the "Test connection" and "Install schema" work.
Can somebody give me some advise on this ? Thanks
Scott
Edited by: Typhoon on Mar 20, 2009 12:59 AM

I have install the same version(basic install) on another windows box, everything seems good...
And below is the error log I find in application.log
09/03/19 13:31:53.956 xmlpserver: Servlet error
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.handleSubmit(SchedulerConfigPage.java:248)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.doPost(SchedulerConfigPage.java:166)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:86)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Could not write the AIF file (session error)

I receive the error "Could not write the AIF file (session error)" when trying to record to Sound Track using any of my USB input microphones. Does anybody know how to resolve the problem?
Also, does anybody have any suggestions about what product to use to produce good multi-track audio files. I am interested in both a hardware and a software solution. It seems that using the standard Apple software that comes on the new G5s does not offer any good solutions.

Update to Snow Leopard then update Final Cut Studio. Chances are your problem will have been fixed.
In my experience, in previous iterations of STP there were a number of serious bugs related to saving files. Running everything up-to-date, however, I am no longer having those problems (knock on wood).

Bi publisher "Could not write to configuration file"

Running 10.1.3.4.1, Whenever I try to create a new resource I get "Could not write to configuration file" message.
If I look in the WLS log I see Server failed to obtain lock for /Security/principals.xml
If I look in XMLP/Admin/Security, I see principals.xml.lock file with todays date
All files in the xmlpserver folder are owned by the weblogic user

moving the deployment from a nfs mount to a local file system resolved the problem

XML DB repository/ Could not write to configuration file

I have one problem when I create same JDBC datasource and test connection I get: "Connection established successfully". but when I trying to save it I get: "Could not write to configuration file".
I using Oracle XE 10g database and "system" user for JNDI connection. I tryed with new user witch I gived all database permissions but I get same error message.
Do you have any idea what do I need to configure.
Thanks!

This error happens, when the file permission is missing.
or the file got corrupted, change the permission to Admin folder.
Check the folder permission to this oc4j\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF

Could not write file .project

Similar Messages

Maybe you are looking for