"Could not write to configuration file" when config Publisher in admin tab

Hi guys,
I have install OBIEE 10.3.3.4 on an RH linux box (with OS user obiee) and Oracle Application Server 10.1.3.1 on the same box (with OS user oraias).
When I want to change some parameter in the admin tab of BI publisher (Administrator/Administrator as the login name/pass) and click "Apply",
I get the error "Could not write to configuration file". After I change the configuration properties to 777 the error is sitll there. And I also try to change the SECURITY MODEL to XDO, but still no use.
I made a test, for example, when I change something in admin--JDBC--Oracle BIEE and then apply, I got the error. If I update xmlp/DataSource/datasources.xml manually, the change can be seen after I reopen the page admin--JDBC--Oracle BIEE. That means I find the correct file and the file access properties is ok.
For other parameters such as Scheduler Configuration, I got the same error when apply. But the "Test connection" and "Install schema" work.
Can somebody give me some advise on this ? Thanks
Scott
Edited by: Typhoon on Mar 20, 2009 12:59 AM

I have install the same version(basic install) on another windows box, everything seems good...
And below is the error log I find in application.log
09/03/19 13:31:53.956 xmlpserver: Servlet error
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.handleSubmit(SchedulerConfigPage.java:248)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.doPost(SchedulerConfigPage.java:166)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:86)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Similar Messages

XML DB repository/ Could not write to configuration file

I have one problem when I create same JDBC datasource and test connection I get: "Connection established successfully". but when I trying to save it I get: "Could not write to configuration file".
I using Oracle XE 10g database and "system" user for JNDI connection. I tryed with new user witch I gived all database permissions but I get same error message.
Do you have any idea what do I need to configure.
Thanks!

This error happens, when the file permission is missing.
or the file got corrupted, change the permission to Admin folder.
Check the folder permission to this oc4j\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF

Bi publisher "Could not write to configuration file"

Running 10.1.3.4.1, Whenever I try to create a new resource I get "Could not write to configuration file" message.
If I look in the WLS log I see Server failed to obtain lock for /Security/principals.xml
If I look in XMLP/Admin/Security, I see principals.xml.lock file with todays date
All files in the xmlpserver folder are owned by the weblogic user

moving the deployment from a nfs mount to a local file system resolved the problem

Could not read Log4j configuration file when I run jar file

Hi,
I'm using Log4J in my application..
I configure the log4j, as follows;
PropertyConfigurator.configure("properties/logging.properties");and then go on to use it.
The .properties is in the root when I jar my source. I use Ant to Jar the file. It all works good when I run the jar file from ant.
The problem is when I run the jar file by double clicking on it, I get an error
" Could not read configuration file [properties/logging.properties]."
I tried the following options;
PropertyConfigurator.configure("/logging.properties");
PropertyConfigurator.configure("./logging.properties");
PropertyConfigurator.configure("../logging.properties");But in all cases, I get corresponding errors on running the jar file through Ant:
log4j:ERROR Could not read configuration file [logging.properties].
log4j:ERROR Could not read configuration file [./logging.properties].
log4j:ERROR Could not read configuration file [../logging.properties].
I want to be able to run the Jar by double clicking on it or through Ant.. Would any one know how to fix this issue so that I can use both methods..

Keep your properties file inside the root folder of your application.It is working fine

Could not write the AIF file (session error)

I receive the error "Could not write the AIF file (session error)" when trying to record to Sound Track using any of my USB input microphones. Does anybody know how to resolve the problem?
Also, does anybody have any suggestions about what product to use to produce good multi-track audio files. I am interested in both a hardware and a software solution. It seems that using the standard Apple software that comes on the new G5s does not offer any good solutions.

Update to Snow Leopard then update Final Cut Studio. Chances are your problem will have been fixed.
In my experience, in previous iterations of STP there were a number of serious bugs related to saving files. Running everything up-to-date, however, I am no longer having those problems (knock on wood).

RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

Outbound Idoc processing fail with the following error:
Could not write IDoc to file
Message no. EA299
Diagnosis
The system could not convert data from the data record 000027.
Procedure
Check the port definition of the receiver port.
You can use the "Continue despite conversion error" option to write the IDoc to the file from transaction BD87 with replacement characters.
Short dump indicate that there is a some junk character in th e TPRI_DEF for program SAPLSPRI that it is unable to convert.
I have set the flag on the we21 port to "continue despite conversion error" and that seem to help, but I would like to figure out how to fix the junk characters from coming through from the TPRI_DEF table.
This is what shows up in the short dump after RSEOUT00 is run.
TPRI_DEF                                   / /       : :     00002932
    010GV21            \0\0\0\0\x0006āȂ耀㐱〲\0\0嬇\0ሟ鴂푎眩\x0802儔잏퉓
I do not see any entries for area "GV" in the table, there is one for "GF". which has no user assigned to it and it is of key version 21.
I am not sure if the table is supposed to have an entry with no user assigned?
thank you for looking at this issue .

HI Jurgen,
we have the same issue, chinese charecter is in PO text header. so facing error. If we click unicode format then it works fine as my testing in development.
I just want to knom what is the impact if i clicked directly unicode format ?( with refernce to your reply above " have you set the Unicode format flag directly above in WE21?" )
I doc is going from SAP sytem - (PO information )
Pls adivce..
waiting for your reply..
Thanks in advance

Could not write to the file. It may have been opened with insufficient ...

Cannot add item to keychain with the above error
Is there a solution?
An error has occured. Unable to add an item to the current keychain.
Could not write to the file. It may have been opened with insufficient access privileges

Is there any more background information that you care to add to help enlighten us?

Could not write the Aiff file (session error)

When I put Soundtrack Pro into record I get this error message. Anyone had this happen? Did you solve it?

Update to Snow Leopard then update Final Cut Studio. Chances are your problem will have been fixed.
In my experience, in previous iterations of STP there were a number of serious bugs related to saving files. Running everything up-to-date, however, I am no longer having those problems (knock on wood).

I get "could not open install.log file" when clicking on link in website which leads to an email address, all other links work OK.

I am blocked by a message box headed 'Wise Uninstall' and the above error message each time I attempt to use a 'contact us' feature in a website which would normally takes me to an email address. The same happens when right-clicking on an image in any website to send to an email recipient.
I would really appreciate your help in resolving this issue as it is most annoying as you can image.
Many thanks, Judy.

ok I managed to fix this! I had to run a disk repair it took a long time but after a reboot it now works fine.
hard drive -> properties -> tools -> error-checking -> check now...

"Could not locate the Resources file in the Configuration folder"

While opening DW cs5 on my iMac OS X 10.7.5 a window came up that says: "Could not locate the Resources file in the Configuration folder. This file is required to run Dreamweaver. Please reinstall the application."
After downloading and reinstalling Adobe Creative Suite CS5 yesterday per the instruction of Adobe tech support, the application still had the same message when I attempt to open it. Not sure where else to turn. Please advise. Thanks

See if this previous thread regarding the same issue will help:
http://forums.adobe.com/message/2274699#2274699
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Could not write to file: C:\Program Files (x86)\Adobe\Acrobat 7.0\ActiveX\AcroPDF.NOR. ?

Hi, I get this message (loosely translated from Swedish):
"Could not write to file: C:\Program Files (x86)\Adobe\Acrobat 7.0\ActiveX\AcroPDF.NOR.
Confirm that you have access to this file"
when I try to install Acrobat standard 7.0, and after several "retry" I cannot finish the installation.
Does anyone know why?
Thank you,
MIa

Appears that you are on a Win7, 64-bit machine. AA 7 has an issue with activation since the server no longer exists for AA 7. There is a separate install at Adobe to address this issue that might solve the problem temporarily (Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3). Even if you get AA 7 installed on Win7, you will have to do workarounds to make it work. Both the print driver (Adobe PDF) and AcroTray.exe fail on Win7 and they require workarounds to be able to even use AA 7. It is strongly recommended that you get AA XI at this point.

LabVIEW could not write the file back to disk (-2570)

Hello,
i use this MDF data storage plugin to write MDF files: mdf plugin
I created a project with some VI's like MDFOpen.vi, MDFClose.vi, MDFWriteDouble.vi, etc ...
I also created a Test VI which generates data at a specific rate (want to see performance) and write it to a MDF file. It works ....
Now I want to use this in C#. I compiled a LabView .Net DLL out of my MDF VI's and referenced it in Visual Studio. I can open a MDF File from C# and close it. But as soon as I write a double (actual content) into the MDF File I get an exception when I call MDFClose.vi from DLL. Obviously "Close Data Storage <APPEND>" from inside my MDFClose.vi returns error -2570: LabVIEW could not write the file back to disk. I have no idea why.
regards
Thomas

So I guess it's time to update this post for anyone who also have problems with MDF or Storage/DataPlugin VIs in general.
My task was to create a MDF Logger, so I needed to write MDF files. MDF4Lib from Vector mentioned in an above post can only read MDF files. ETAS is also selling an MDF Lib but there are reasons I don't want that. So why not use MDF Storage/DataPlugin from NI? I can tell you.
My MDF Logger is now finished and can create MDF files with groups and channels, just like TDMS, but ... when I write data in a loop and then finish by closing the MDF File/Reference it may happen that:
i get error LabVIEW could not write the file back to disk (-2570)
application crashes
both 1 and 2
If it does not crash or throw an error it succeeds finishing my MDF file correctly but next time I repeat this (without restarting application) I notice writing data takes longer than in first run and my memory is increasing. The more I repeat the longer it takes to write data to MDF and the more memory is increasing until it finally crashes. It also depends on how much data in how many groups/channels are written.
NI Support already got this and confirmed that with desktop execution tracekit you will see that with each call to a Storage/DataPlugin VI references are leaking. Those leaks are assumed to be the root cause of all that trouble. There is not bugfix but apparently one or more CAR's about this. So I guess this is not MDF specific but generally with Storage/DataPlugin.
My current only workaround is to close the app each time after I am done writing one MDF file. My future fix will be to implement MDF on my own.

Could not write file .project

Hi, i need help.
I have a lot of components in a workspace but when i want to
make a reference into them flexbuilder send me next error-messaje:
could not write file d:\......\.project
i have seen and this file is not an "only read" file, and i
have permission to write it...
I have also copy this proyect, and test it in other
computer...
Could you help me?
Thanks in advance

I have a flex 3 workspace with a lot of components
(libraries). I need to import one of this components(library 1)
from another one(library 2), to register a cairmgorn event in
library 2´s controller.
When i click with the rigtht button over library 2, and
select in the menu, properties option, then select proyect
references and then select library 1, when i press ok, flex send me
the error, "could not write file /library2.../.project"
because of that error when i restart my flexbuilder, no any
reference is in my library 2 component.
Also, if i try to select propertys, flex library build path,
and then library path tab, i add proyect and select library 1
component, flex let me select it, and press ok, but doesn't let me
use hes propertys and components, like i not doing anything, and
when i restart my flex builder, this library path has dissapear.
Thanks in advance.

Adobe Media Encoder Could not write XMP data in output file.

Hi there i have searched for this on the forums,
if there is a Thread on it please Link:)
This is my Encoding Log from Adobe Media ancoder,
(se Below).
im doing a projekt from Mts Files, in Premiere pro
i have Checked the box that no Xmp Data needs to be added, to the left from the Queue button in the export window.
Should i Delete all the Xmp in Bridge or somthing like that to Resolve this?
Regards
Jonas Dwight
Encoding Log:
- Source File: /Users/Blasuk/Library/Caches/TemporaryItems/Mogel_oe_2014_nyeste.prproj
- Output File: /Users/Blasuk/Desktop/Video_Projekts/Fremkaldte/Moegeloe2014-hq.mp4
- Preset Used: Custom
- Video: 1920x1080 (1,0), 25 fps, Upper, 01:18:52:10
- Audio: AAC, 320 kbps, 48 kHz, 5.1
- Bitrate: VBR, 2 pass, Target 15.00 Mbps, Max 41.30 Mbps
- Encoding Time: 11:05:14
01/05/2015 07:35:01 PM : File Encoded with warning
File importer detected an inconsistency in the file structure of Moegeloe2014-hq.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file.

Any help please?! Thank you!

Media Encoder "Could not write XMP data in output file." issue

Greetings,
We have invested a great deal of money and time into a brand new editting system and we need some help with adobe media encoder. We are trying to export some of our projects and we keep getting the same error. Here is the entire log of errors:
Could not write XMP data in output file.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_6.prproj
- Output File: M:\acura_rooftop_43_draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:17:23
2/4/2010 1:42:28 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_7.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:02:09
2/4/2010 1:54:21 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_9.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:16:04
2/4/2010 2:19:49 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_10.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_HD_draft_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:01:38
2/4/2010 2:30:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_11.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:38
2/4/2010 3:19:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_12.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:01:08
2/4/2010 3:31:37 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_17.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:15:31
2/4/2010 4:21:06 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_19.prproj
- Output File: M:\GRAPHICS\cow_graphics\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:24
2/4/2010 5:16:54 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_16.prproj
- Output File: C:\Users\Ramius\Desktop\mxf.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:05:08
2/23/2010 12:12:40 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_18.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:04:00
2/23/2010 12:26:54 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_19.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:05:08
2/23/2010 12:51:01 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_23.prproj
- Output File: C:\Users\Ramius\Desktop\allhdtest2.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:04:20
2/23/2010 4:23:46 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_27.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:11
3/2/2010 3:21:19 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_28.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:00
3/2/2010 3:34:47 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_29.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_2.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:10:22
3/2/2010 4:41:03 PM : Encoding Failed
Error compiling movie.
Unknown error.
We absolutely need to fix this issue ASAP, we are in a major bind until we can resolve this issue. Thanks a bunch.

We are using Windows 7
dual quadcore intel xeon processors 8gb ram
10000rpm internal drives. quadroefx 1800 video card
The drive is 4tb
We have tried exporting to many different locations with no luck
Its a very nice video editting system. We just need to figure out this exporter

"Could not write to configuration file" when config Publisher in admin tab

Similar Messages

Maybe you are looking for