Could one use a y VGA splitter to connect an ipad to a computer and a smart board that is connected to it?
Could a person connect an ipad to a computer and a smart board that is connected to it by using a y VGA splitter?
I use a program called Reflector to wirelessly display my iPad onto my Mac. To take it a step further, I connect my computer to a projector so that my iPad screen can be displayed via projector to a screen or smart board on the wall. Much cheaper than buying an Apple TV to do this.
Hope this answers your question!
~Joe
Similar Messages
-
Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out. What is the likely problem???
Eject the iPad, quit iTunes, restart the Mac and reset the iPad and try again. Use another USB port on the Mac if you have a free one to use.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up. -
I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
Cheers, Tom -
am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
I have recently had problems in getting my Adobe Premiere Elements 10 to run. One of the gentlemen was able to take over control of my computer, and got it working for me, however since that time the program will sometimes open but most times it just freezes the computer and I have to shut it down and re open without any success with opening the elements program.
Can you helpSosure
What computer operating system is your Premiere Elements 10 running on?
What video card/graphics card does your computer use? NVIDIA GeForce? If so, please read the Announcement about the Premiere Elements 10 NVIDIA GeForce issue which is found at the top of this web site. Does that apply to you? The explanation for the situation and the fix (roll back of the driver version) are all included in that Announcement.
We need to rule in or out this factor at the onset before we get to other questions
a. non NIVIDIA video card/graphics card driver
b. project preset and properties of source media
c. computer details
More later.
We will be watching for your reply.
Thank you.
ATR -
Am using i phone 4, I have Microsoft Outlook 2007 on my computer and in that all the contacts. I also have latest version of itunes on my laptop. Despite continuous efforts am unable to syn contacts from outlook to my i phone. I also have outlook set as my default for e-mail. Could anyone help me?
you dont need computer. go to settings > icloud and turn off what you dont want like photostream/calendars/contacts. for itunes 11.1 you need to go to itunes.com and download it then install it.
-
Can I use I pad 2 directly with my airport express to play music through my hi fi that's connected to the airport express vis headphone jack?
Yes, that's one of the things airplay is for...
-
The rest of my music is still on my iPad, so how do I get it from my iPad to the computer, and back on my phone? All my music is sitting there safely on my iPad, but whenever I try to sync it with my computer the only option I get is to wipe the iPad and replace it with the files on the computer---which is only a fraction of what I had originally. How do I fix this?? It even deleted my playlists, and I now only have some 200 songs left out of what used to be over 1000!
It can not do that all by itself.
When you plugged it in, iTunes said 'Oh goody! You got a new phone! Would you like to make it just like your old phone?'...
You explicitly said 'Yes'.
You can't undo that.
No backup of the current state of the new phone was made. It was wiped and the last backup of your old phone was restored to it.
Anything you had on the new phone is gone. -
I want to set up wireless speakers in my yard using my phone as the remote to run music on my computer and ipad.. what do i need to do this? I have an airport extreme.. wireless set up.
I found these speakers after I posted
Audio Unlimited SPK-VELO-003 Premium Indoor / Outdoor Wireless Speaker System w/ Remote Contro
I am thinking someway I should be able to send my music through airplay or homeshare to a speaker... hopefully wireless outside.. i know you can do it inside wiresly but can you do it outside?
I do not want to run speakers wires all over my yard.
Thanks -
when i connect my Ipad with My pc Itune is giving msg that " This IPad Cannot use because Apple Mobile Devise is not started"
You might want to take a look at this kb
http://support.apple.com/kb/TS1538 -
hi, i connected my ipad to my computer to transfer movies i downloaded from itunes...never had problem untill now...when i connected the ipad i recieved this message " this ipad cannot be used because the apple mobile device service is not started" i do not know what this means or how to fix?
Take a look at this link, http://support.apple.com/kb/TS1567
-
When i connect my Ipod to my computer i get a message that says, "This Ipod cannot be used because the Apple Mobile Device service is not started." what do i do?
See:
How to restart the Apple Mobile Device Service (AMDS) on Windows -
i restored my ipod and then it said for me to connect my ipod to my computer and it says error could not complete your itunes store request an unknown error occurred (-9808)?
This covers your symptom:
http://support.apple.com/kb/TS2753 -
When i connect my iPhone and iPad to my computer i get a message that says This iPhone cannot be used because the Apple Mobile Device service is not started. Any ideas??
Type "Apple Mobile Device service" into the search bar at the top of this page by "Support" and read the resulting articles.
-
This an IPOD I bought used. Everything else works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. I should say it connects but then immediately disconnects. Any ideas?
Then my last suggestion is to Reset it, while connected to the BMW Audio.
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!
Maybe you are looking for
-
Stacked Canvas Problem in oracle 6i form builder
Hello, i have 2 content canvas "DTL and PUNCH",1 tab,1 horizontal canvas in window1 and 1 another content canvas "parameter" in window2. i have created a stacked canvas under dtl canvas because I have a master-details form. my details has more column
-
Per specs, Apple's old 21" Studio Display (graphite-CRT) and their original 22" Cinema Display (M5662-LCD) have the same ppi (85), but I am struck by the difference in display clarity. Both are set at max resolution: CRT-1600x1200 and LCD-1600x1024.
-
XSL - dynamically select XML data source
I need to create an XSL file that will be used to transform one of many XML files. The XML files are structurally identical, but they contain different data. I would like pass a parameter (most likely in the query string) identifying the appropriate
-
Hello, Have seen this sentence in the api documentation: " Instances, once started by the process domain, may be administered (for example, an instance may be suspended, resumed or aborted) via this interface. In addition, this interface allows devel
-
I'd like to know why Apple no longer offers any other size display besides the 27"? I can't use that size, nor do I have that kind of money. You are forcing me to buy another brand and the other brands don't have the compatibility to the new MacBook