Could some one help me with dead pixel on my screen?
I bought my Thinkpad X61 only a few days back. I opened it and found that there is one dead pixel in the middle of the monitor. Is there any possibilty that Lenovo would fix this? I know that I have to pay 15% of the purchage amount in order to return this peice. I would be really happy to return it without any costs. I talked to the service people. This is the worst service ever I had. No one is replying. One girl told me that the dead pixel goes away in a few days and It would be okey. It looks like if you order a laptop online, they send you laptop with defective pixels.
This message is locked.
Please use the one in the X Series Tablet section.
Message Edited by carbon_unit on 04-05-2008 07:04 AM
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo
Similar Messages
-
could some one help me with something important i have a 2.8 ghz intel quad core Imac with 10.7 with bootcamp 4.0 but still getting that black screen while trying finish the install of windows 7 etc. or do i need a new mac for it to work properly
This might help point you in the right direction.
http://support.apple.com/kb/HT4818
Hope it helps
Also google it and lots of results come up including youtube clips.... -
could some one help me everytime i plug my ipad mini into my laptop, the laptop crashes. Is this my I pad or my laptop.
Does this happen only when plugging into a specific port or all of them? If it happens with all of them then it's probably your laptop. Have you tried going through a powered usb hub? That would take the power burden off the laptop mb. Until you conduct a systematic search you will not be able to narrow down exactly what the real problem is.
-
I have to make a catalouge for my services as a financial planner.. earlier i used to do in MS publisher.. now i have a mac book.. can some one help me with some software info with which i can design a catalogue??
Depending on what your needs are, you may use Pages included in iWork or purchase it separately (usually there is an evaluation copy with any new mac, I guess) or try other publishing apps. I once used MS Publisher, I remember it was something like a more sophisticated word processor, right?
You may try the cheaper DTP iCalamus or Word for mac. -
SAP BO SCPM could some one help to get the list of cotent after installing SAPBO SCPM 2.0
Dear Experts,
Could some one please provide the list of objects (complete flow) we get after installing SAP BO SCPM 2.0.
Please find the below link for reference:
http://scn.sap.com/people/tarunkamal.khiani/blog/2011/07/05/what-s-new-with-sap-businessobjects-supply-chain-performance-management-20
your inputs will highly been appreciated.
Thanks,
KhaderHi Steve
Many thanks for that. Could I ask that
this kind of thing goes in the release
readme also.
Marc -
Can some one help me with my wii please?@?@??!?!?!?
ok, its not that i want ot know why this sems to be such a big problem, i just would like to know how to fix it! hopefully this isn getting old hat, but it seems to some times want to connect, and some times not( or atleast fund an access point), but when it does, i've entered the correct password i dont know how many times in a row, but it would not reconize the password, then i got it to by not entering a password at all..... only to have it fail the connection test..... yipee, and i thought nintendo was the mac of the game consoul world! itd be simply awesum, no MIRACLUS!, if some one could guide me thru step by step on how to set this up!!!
HELP ME PLEASE!!
-the big turd in the sky,
turdfurgisinturdfurgisin, Welcome to the discussion area!
Are you using an AirPort Express (AX) to create your wireless network?
Are you using wireless encryption? If so what type (WPA2, WPA, or WEP)? -
Hi All,
Issue 1:
I have installed IOS 7 in my 4s and when i connect it to my Mac itunes it detects my phone but i am not able to copy from the itunes version 11.1 (126).
can some one check why i am not able to transfer pics or music from my Mac to iPhone 4s and can let me know on this please.
Issue 2:
And to all my apps i am not getting automatic pop up when i receive a message, It says "Please connect to itunes to use push Notification" can some one say how to go about his.
Issue 3:
when i try to launch my facetime from my phone.After entering my user name and password it not launching my Facetime or imessage. dont know whats the reason, I am not able to use both Facetime and imessage from my iphone 4s.
Looking forward for your reply.
reagrds
sathishI have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
Can some one help me with diagnostic test result " apple mobile device driver not found"?
I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jun 28 15:17:19 2012
Lease Expires: Fri Jun 29 03:17:19 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
Could some one help me in knowing abt this function
NVL(MONTHS_BETWEEN(TO_DATE('01/01/2005' , 'dd/mm/yyyy')+1,pims.get_last_appt(p.patnt_refno)),0) op
Could some body explain me how this works in a pl/sql block .
many thanks
PrkIt works the same in sql as pl/sql, but anyway...here goes.
If the number of months between 02-JAN-2005 and the patient's last appointment is null, then put a zero. Or in layman's terms, find out how many months were between 02-JAN-2005 and the last time the person had an appointment. If they've never had an appointment, it is 0. -
This is my first time being on these forums,so I'm new at this,but I would greatly appreciate any help or tips! I have a iPod nano and have a little over 300 songs on it. But a few weeks ago I had to re-boot my computer because so much junk was on it. But I also had to make a new iTunes library because for some reason I could not get into my old one.I also have a family member who I shared this library with. She has a shuffel. But every time we try to plug in our iPods new music will not download. Also only about 100 of the songs we have appear on the library. It says we are not authorized to play them, so when I click "authorize computer" it does not help. The library does'nt delete the songs but they just wont appear on the screen. And I have no access to my old account. Could someone help me?
It can take upto 24 hours for a sim card to activate
-
Could every one help me with this? Thanks
2. a. Write a program that prompts a professor to input grades for five different courses for 10 students. Prompt the professor to enter one grade at a time using the prompt �Enter grades for student #1� and �Enter grade #1�. Verify that the professor enter only A, B, C, D, or F. Use variables for the student numbers (1 through 10) and grade numbers (1 through 5). The class name is GradePoint.
b. Modify the GradePoint program so that it calculates the grade point average (GPA) for each student. A student receives four grade points for an A, three grade points for a B, two grade points for a C, one grade point for a D, and zero grade point for an F. Store the grades and points in parallel arrays. Search the arrays to determine the points for the grade. Store the GPA for each student in another array. (Hint: Copy the GPA for each student to a different array by initializing the new array with GPAs from the other array.)
c. Display the GPA scores from each of the two GPA arrays to verify that the GPAs were copied correctly. Identify which array the scores are from.I got A. but I don't know how to do B and C
could everyone help me how to do B and C?
here are my code in A.
I hope I am doing right:
here are my code in A.
I hope I am doing right:
public class GradePoint
public static void main(String[] args) throws Exception
char Grade;
System.out.println("Enter grades for student #1");
System.out.println("Enter A, B, C, D, or F");
System.out.println("\nEnter grades #1");
Grade =(char)System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #2");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #2");
Grade =(char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #3");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #3");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #4");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #4");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #5");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #5");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #6");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #6");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #7");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #7");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #8");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #8");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #9");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #9");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
System.out.println("Enter grades for student #10");
System.out.println("Enter A, B, C, D, or F");
System.out.println("Enter grades #10");
Grade = (char)System.in.read();
System.in.read();System.in.read();
while(Grade != 'A' && Grade != 'B' && Grade != 'C' && Grade != 'D' && Grade != 'D')
System.in.read(); System.in.read();
System.out.println("Entry must be A or B or C or D or F!");
Grade = (char)System.in.read();
b. Modify the GradePoint program so that it calculates the grade point average (GPA) for each student. A student receives four grade points for an A, three grade points for a B, two grade points for a C, one grade point for a D, and zero grade point for an F. Store the grades and points in parallel arrays. Search the arrays to determine the points for the grade. Store the GPA for each student in another array. (Hint: Copy the GPA for each student to a different array by initializing the new array with GPAs from the other array.)
c. Display the GPA scores from each of the two GPA arrays to verify that the GPAs were copied correctly. Identify which array the scores are from. -
Can some one help me with this project
This project will simulate the behavior of an Integrity Subsystem in validating the data in a database.
More specifically, assume there are 2 tables, A and B, in a given database. Table A has 4 integer
attributes names a, b, c, d and table B has 4 integer attributes named e, f, g, h.
Your program is to input up to 20 integrity rules as discussed below, and store them in some internal
format of your choosing. Then enter up to 15 tuples for each table. For each tuple, check it against all the
applicable integrity rules and print out an error message for each rule that is violated. If no rules are
violated then print a message saying all it well and enter that tuple into the database. Do not enter a tuple
into a database if any rule is violated for that tuple.
There are 3 different types of integrity rules: Primary key, Foreign key, and Attribute.
The formats for the rules are given below:
Primary key: rule#, P, tablename, attribute name
1 A or B a,b,c,d,e,f,g, or h
The meaning of this rule is that the specified attribute name of the specified table is the
primary key of that table.
Foreign key: rule#, F, tablename, attribute name, tablename, attributename
2 A or B a,b,c,d,e,f,g, or h A or B a,b,c,d,e,f,g, or h
The meaning of this rule is that the first attribute name and tablename is a foreign key
referencing the second attribute name and tablename.
Attribute: rule#, A, tablename, attribute name, low value, high value
3 A or B a,b,c,d,e,f,g, or h 0-9999 0-9999
The meaning of this rule is that the attribute name in the specified table always have a value lying
in the range of low value to high value inclusive.
Your program should implement at least the following 10 rules
Rules:
1 P A b
2 F A d B g
3 A A a 10 20
4 A B h 8 9000
5 P B g
6 A B g 0 100
7 F A c B h
8 A A b 10 30
9 A B e 0 80
10 A A a 8 30
Page 2 of 3
The following data is provided for your convenience to test the correctness of your program. Remember I
will use these data and some other new data for the testing.
Tuples: (Insert in this order)
A 8 32 30 50
A 10 20 30 40
B 5 20 50 100
B 8 30 40 200
A 10 20 100 50
A 10 22 100 40
A 8 32 30 40
B 30 40 50 60
B 80 2000 0 0
A 9 25 200 50
A 12 25 60 50
B 0 0 0 100
A 10 10 10 10
A 20 20 200 40
A 0 0 0 0
B 0 0 0 0
B 50 50 50 50
Specifications:
1. You can just represent the provided 10 rules and new rules created by yourself in some
internal data structures. Or you can store the rules in a text file and then read it one by one.
2. The test data must be stored in a text file �tuples.txt� in which each line has one tuple and
field items are separated by one or more blank spaces (not comma, or colons).
3. Bring a project report at the beginning of the class on the due date. The project report
should have a summary on how you finish the project. For examples, you should discuss
some key data structures you chosen to store the rules and tuples, how you check the invalid
tuples and insert valid tuples, and so on. I hope that after reading the report, I should get some
ideas how you finish the project even without reading the source code.
4. Also you should print out source code and include in the report. In addition, you need to
copy the execution output results. I give a sample expected output for your reference. You
can change it in any way but just make sure it is clear to read for users.
Sample Outputs (for simplicity only three rules used in this example):
Integrity Rules (total 3):
1 P A b
2 F A d B g
3 A A a 10 20
Tuples: (Insert in this order)
T1: A 8 32 30 50
Page 3 of 3
T2: A 10 20 30 40
T3: B 5 20 50 100
T4: A 8 25 40 100
Results:
T1 is invalid (against rule 3), discard it!
T2 is valid, insert to DB
T3 is valid, insert to DB
T4 is invalid (against rule 1), discard it!
Summary:
2 tuples (T2, T3) are inserted to DB
2 tuples (T1, T4) are discarded
5. Bring a floppy disk containing the source code and the project report word file. It should
only have one directory named as your �Firstname.Lastname� For example, if your name is
John Johnson, the directory name should be �John.Johnson� in the root (your wku email
should be [email protected] also in most cases).
Create a subdirectory �Report� to store the report word file. The report name can be
�CS543_Project_2_Report�. Then create another directory named as �Code� to keep all the
necessary files to run the program without any further configuration (including �tuples.txt�).
6. Submit a zip file which contains all the files in your floppy disk to the �Digital Drop Box�.
The zip file name must be �Firstname.Lastname.zip�. For example, if your name is John
Johnson, the directory name should be �John.Johnson.zip�. So if I unzip the file, I should get
exactly same files as the floppy disk.
7. Follow closely �Program Scoring Rubric For CS Dept� and �Writing/Documentation
Scoring Rubric for CS Dept�. Your project grading will be based on these two guidelines.
At least, your code should have a perfect and consistent format style and include sufficient
comments (generally > 20%) which explain possible confusions clearly. Also always try to
use constant variables to denote numbers. For example, if you created 20 rules in total, you
can define a constant variable such as in C++ �#define TOTAL_INTEGRITY_RULES 20�.So what is your question?
People here are not generally inclined to read your homework, and then read your mind to find out what's giving you trouble.
If you're absolutely lost and have no clue where to start, you should speak to you instructor or engage the services of a private tutor. These forums are simply not an effective venue for that kind of help.
Otherwise, take your best shot, do as much as you can do, and then post specific questions about the specific bits that are giving you trouble. Be as thorough and precise as possible about what you're trying to do and what didn't work. Copy/paste the complete text of any error messages. Add println statements to your code and include comments like "I expected it to print xyz here but it printed abc". -
Can some one help me with this problem with my frame???
i have gt a veri strange problem with my program,that is teh graphic changes only when i resize the the frame,if i dun resize,it will remain the same.However what i intended is that when i click on the radio button,it will change immediately to the respective pages.A simple version of my code is below,can someone helpl me solve it??(there is 3 different class)
import java.awt.event.*;
import javax.swing.*;
public class MainPg extends JFrame implements ActionListener{
private javax.swing.JPanel jContentPane = null;
private javax.swing.JPanel buttons = null;
private javax.swing.JRadioButton one = null;
private javax.swing.JRadioButton two = null;
private javax.swing.JPanel change = null;
public MainPg() {
super();
initialize();
private void initialize() {
this.setSize(300, 200);
this.setContentPane(getJContentPane());
this.setName("mainClass");
this.setVisible(true);
private javax.swing.JPanel getJContentPane() {
if (jContentPane == null) {
jContentPane = new javax.swing.JPanel();
jContentPane.setLayout(new java.awt.BorderLayout());
jContentPane.add(getButtons(), java.awt.BorderLayout.WEST);
jContentPane.add(getChange(), java.awt.BorderLayout.CENTER);
return jContentPane;
private javax.swing.JPanel getButtons() {
if(buttons == null) {
buttons = new javax.swing.JPanel();
java.awt.GridLayout layGridLayout1 = new java.awt.GridLayout();
layGridLayout1.setRows(2);
layGridLayout1.setColumns(1);
ButtonGroup group=new ButtonGroup();
group.add(getOne());
group.add(getTwo());
buttons.setLayout(layGridLayout1);
buttons.add(getOne(), null);
buttons.add(getTwo(), null);
return buttons;
private javax.swing.JRadioButton getOne() {
if(one == null) {
one = new javax.swing.JRadioButton();
one.setText("One");
one.setSelected(true);
one.addActionListener(this);
one.setActionCommand("one");
return one;
private javax.swing.JRadioButton getTwo() {
if(two == null) {
two = new javax.swing.JRadioButton();
two.setText("Two");
two.addActionListener(this);
two.setActionCommand("two");
return two;
private javax.swing.JPanel getChange() {
if(change == null) {
change = new javax.swing.JPanel();
change.add(new One());
return change;
public static void main(String[] args){
new MainPg();
public void actionPerformed(ActionEvent e) {
change.removeAll();
if("one".equals(e.getActionCommand())){
change.add(new One());
else{
change.add(new Two());
change.repaint();
import javax.swing.*;
public class One extends JPanel {
private javax.swing.JPanel jPanel = null;
private javax.swing.JLabel jLabel = null;
private javax.swing.JPanel jPanel1 = null;
private javax.swing.JLabel jLabel1 = null;
private javax.swing.JLabel jLabel2 = null;
public One() {
super();
initialize();
* This method initializes this
* @return void
private void initialize() {
this.setLayout(new java.awt.BorderLayout());
this.add(getJPanel(), java.awt.BorderLayout.NORTH);
this.add(getJPanel1(), java.awt.BorderLayout.WEST);
this.setSize(300, 200);
* This method initializes jPanel
* @return javax.swing.JPanel
private javax.swing.JPanel getJPanel() {
if(jPanel == null) {
jPanel = new javax.swing.JPanel();
jPanel.add(getJLabel(), null);
return jPanel;
* This method initializes jLabel
* @return javax.swing.JLabel
private javax.swing.JLabel getJLabel() {
if(jLabel == null) {
jLabel = new javax.swing.JLabel();
jLabel.setText("one");
return jLabel;
* This method initializes jPanel1
* @return javax.swing.JPanel
private javax.swing.JPanel getJPanel1() {
if(jPanel1 == null) {
jPanel1 = new javax.swing.JPanel();
java.awt.GridLayout layGridLayout2 = new java.awt.GridLayout();
layGridLayout2.setRows(2);
layGridLayout2.setColumns(1);
jPanel1.setLayout(layGridLayout2);
jPanel1.add(getJLabel2(), null);
jPanel1.add(getJLabel1(), null);
return jPanel1;
* This method initializes jLabel1
* @return javax.swing.JLabel
private javax.swing.JLabel getJLabel1() {
if(jLabel1 == null) {
jLabel1 = new javax.swing.JLabel();
jLabel1.setText("one");
return jLabel1;
* This method initializes jLabel2
* @return javax.swing.JLabel
private javax.swing.JLabel getJLabel2() {
if(jLabel2 == null) {
jLabel2 = new javax.swing.JLabel();
jLabel2.setText("one");
return jLabel2;
import javax.swing.*;
public class Two extends JPanel {
private javax.swing.JLabel jLabel = null;
public Two() {
super();
initialize();
* This method initializes this
* @return void
private void initialize() {
this.setLayout(new java.awt.FlowLayout());
this.add(getJLabel(), null);
this.setSize(300, 200);
* This method initializes jLabel
* @return javax.swing.JLabel
private javax.swing.JLabel getJLabel() {
if(jLabel == null) {
jLabel = new javax.swing.JLabel();
jLabel.setText("two");
return jLabel;
}//change.repaint();
change.revalidate(); -
Hi experts i have to develop a report based on the following data Using ODS and Cube.Iam providing all the details as under.
DSO
Key Part
0CUSTOMER
ZTID
Territory ID
Data Part
0FISCYEAR
Zpercent Key Figure
Cube
Customer
0Customer
Territory
ZTID
Time
0FISCYEAR
Key Figures
ZREVENUE
Sample Data in DSO
Customer Territory 0FISCYEAR Zpercent
C1 T1 2008 50%
C1 T2 2008 50%
C2 T1 2008 25%
C2 T2 2008 25%
C2 T3 2008 50%
Sample Data into Cube
C1 2008 100000 USD
C2 2008 200000 USD
C3 2008 100000 USD
Sample Report 1
C1 T1 2008 50000
C1 T2 2008 50000
C2 T1 2008 50000
C2 T2 2008 50000
C2 T3 2008 10000
C3 2008 10000
i have desinged cube and DSO as per the requirement with given characteristics.But iam not able to generate the report as per requirement.Iam using multiprovider with cube and DSO and then developing report.I will allocate points to all hose help me and advance thanks.
ByeHi
Try this and let me know in case of any issues
Create a calculated key figures with the formula (NDIM(ZREVENUE)) * (Zpercent / 100)
Please let me know the assignment in the Multiprovider for customer and fiscal year
Regards
Rohit
Edited by: Rohit Deshmukh on Jul 2, 2008 9:13 AM -
Can some one help me with this date stuff
Hello,
I wat to write a method that will take a date or a month and then return the time period
b4 that date or month..criteria would be like this..
if the pweriod is weekly then the enddate will be passed and it should return date that was 7 days
prior to the enddate. For e.g
enddate = 3 April 2002
the method should return
begindate = 27 March 2002
here is the method I am trying to work with...
what I am doing do far is a break down the date into integer values and then reconstruct the date again
...I am not being successful doing so..please take a look at my code and tell me what am I doing wrong
thanks
public static Date getBiginingOfPeriodDate(Date endDate){
Date beginDate = null;
Calendar calendar = Calendar.getInstance();
System.out.println("Date passed = "+endDate);
calendar.setTime(endDate);
int iDay = calendar.get(Calendar.DAY_OF_MONTH);
int iMon = calendar.get(Calendar.MONTH);
int iYr = calendar.get(Calendar.YEAR);
System.out.println("End date int values [ "+iDay+", "+iMon+", "+iYr);
calendar.set(iDay,iMon,iYr);
System.out.println("create end date from in values [ "+calendar.getTime()+" ]");
return beginDate;
}If all you want to do is simple date arithmetic, such as subtracting 7 days from a date, just use the java.util.Calendar class, which provides methods (such as add) to do that for you. Don't "reinvent the wheel".
Maybe you are looking for
-
KDEmod=unstable? + What WM/DE would you reccomend for me
Hi guys. I don't want to start a flame war, please. I am using Arch with KDEmod and I have the impression that this combination is a lot less stable than my previous Ubuntu+Gnome+Compiz (mind you, I am NOT running compiz on Arch anymore). I don't kno
-
I am trying to create a wizard based application. I have set up View Objects as nested View Object using View Links in application module, for 3 levels. The wizard style checkbox is checked at the top level The 2nd level are divided into 4 regions. L
-
Photoshop elements inspiration browser update
I am unable to install the update for Photoshop Elements 10 Inspiration Browser. I followed the directions on the tutorials. I uninstalled the browser from my programs, restarted the computer, and tried to install the update. Every time I was conn
-
When my new iPhone synched it detected v2.2.1 and is installing it now. Right now a little dialog box is displaying "Backing up Doug's iPhone", so I assume it is backing up the old system and also contents. To where is this backed up? And could it be
-
HT202304 Can't send e-mails using iCloud address on either my iPhone or Macs ?
Hi guys and gals, I can't seem to be able to send e-mails using my iCloud address. No idea why that is. I don't get any error message, the e-mails 'get sent' without any fuss or ending in the outbox folder and they simply do not reach their destinati