Could somebody explain to me how to set up a VPN on my iMac and access it on iPhone and computer?

Question

I'm mainly using it to bypass an internet block. Could you explain in detail how to set up a vpn that will also work on iPhone? Do you have any recommended applications for me to install? Thank you

Answer 1

To run a public VPN server behind an NAT gateway, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.
5. Each client must have an address on a netblock that doesn't overlap the one assigned by the VPN endpoint. For example, if the endpoint assigns addresses in the 10.0.0.0/24 range, and the client has an address on a local network in the 10.0.1.0/24 range, that's OK, but if the local network is 10.0.1.0/16, there will be a conflict. To lessen the chance of such conflicts, it's best to assign addresses in a random sub-block of 10.0.0.0./0 with a 24-bit netmask.
6. "Back to My Mac" on the server is incompatible with the VPN service.
If the server is directly connected to the Internet, see this blog post.