Could somebody with NS 6 check an applet for me?

Hi,
I have a Japplet that I want to see if it runs
in Netscape 6.0. If you have that browser
please use it to go to the following link:
http://smashingwebs.com/colorPick.html
you should see an applet that gives you
the choice between 3 colors. Please
let me know!
Thanks!

it is visible

Similar Messages

  • Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • I BOUGHT LIGHTROOM 5 IN LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMBER WITH THE REDEMPTION CODE BUT APPEARS AN ERROR. MY PC IS WINDOWS 8. COULD SOMEBODY HELP ME?

    I BOUGHT LIGHTROOM 5 IN BEST BUY LAREDO TX AND I TRIED TO GET IN MONTERREY MEXICO THE SERIAL NUMER WITH THE REDEMPTION CODE FROM THE BOX, BUT APPEARS AN ERROR. MY PC IS WINDOWS 8, COULD SOMEBODY HELP ME??

    I don't know that you can purchase Adobe software in the US for installing and using outside of the US.
    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I would like to remove a short gray edge from two images. I need help in that I am not yet able to use PhotoShop. Could somebody kindly help me with this?

    I would like to remove a short gray edge from two images. I need help in that I am not yet able to use PhotoShop. Could somebody kindly help me with this?

    I doubt it Doc Maik, but I am certainly happy to learn The image is this one (and a similar one). They would be beautiful portraits if not for the "extra mouth". The grey edge that I would like to remove is the excess of (grey) mouth that is actually my horse's chin, but that in the pictures looks like a wider, looping mouth. Practically, looking at the picture, the "extra mouth" to the left. What I would love it to be able correct that to look like a normal mouth, which means that half of the protruding edge should be removed. I am not sure I was able to explain myself, but here is one of the two pictures. I thank you for you kindness in being available to advise me.

  • The project could not be created,please check the webroot folder(it may overlap with an existing project)

    Error msg: "The project could not be created, please check
    the webroot folder (it may overlap with an existing project)." This
    occurs in the CF/Flex Application Wizard Pproject Information
    Window on a Flex3 application. I checked to make sure that there
    were no overlapping applications and the message still persists.
    There are old threads on this from Flex 2 but the problem still
    exists in newly released Flex 3. Please help!

    I can't help you with this, but you are not alone. A friend
    of mine has exactly the same problem

  • Hi, i try to buy from itunes store but i could not it said" your purchase could not be completed please check with itunes support".  please solove me problem

    Hi,
    i try to buy from itunes store but i could not it said" your purchase could not be completed please check with itunes support".  please solove me problem
    Many things,
    Rashid

    You can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption

  • HT5934 after downloading iso7 my imessage and FaceTime will not activate.  it says to sign in with apple id then after trying to do that imassage says could not sign in please check network connection. i need message!! can anyone help?

    After downloadinf iso 7 my imessage and facetime will not activate.  It says to sign in using itunes password then when I try  imessage says it could not sign in please check network connection.  My network says its connected??????

    see if this helps
    http://support.apple.com/kb/TS4268
    Peace, Clyde

  • I have clicked the Apple  Software Update,a window pops up with Failed to check for updates.The operation couldn t be completed. Operation not permitted.This only occurring now did not happen previously.I am using 10.7.4,on a Mbp Pro.

    I have clicked the Apple > Software Update,a window pops up with >Failed to check for updates.
    The operation could not completed. >Operation not permitted. This is only occuring now.It did not happen
    before.The Apple store in Sydney NSW Australia only reinstalled 10.7.4 Lion yesterday.I have downloaded my
    Itunes song and reinstalled Intego antivirus.Will somebody please advise me what to do.It is 4:03 PM Saturday
    here in Koolewong.
                        richard.

    Uninstall Intego...you don't need it.

  • Jar files............could do with some help

    I want to deploy an application I have built along with the JRE it seems creating a JAR file is the way to go. Could somebody confirm this & advise of any other steps that I will need to take along the way. Please take it very SLOWLY and omit nothing.
    I have attempted to create and run a JAR file but have met with failure so far let me explain where i am upto.
    I have an application with several class files all data or code no image or sound files. class that contains the main method is called
    "pStruct". have created a JAR file called "TelDir.jar" succesfully & checked that all required classes are their they are. Next have built the file "mainClass.txt" in notepad have been carefull to get the syntax & case correct & have entered newline before saving file.
    Now i think i am merging the text file into the manifest of the jar file
    with the line:-
    jar cmf mainClass TelDir.jar pStruct.class
    this results in an error message as follows
    java.io.FilenotFoundException:main Class(System cannot find the file specified).
    now I have tried adding .txt to the end of mainClass and the line seems
    to execute happily but if i then try and run my amended jar file with:
    java -jar TelDir.jar
    I get the following response:-
    Exception in thread "main" javac.lang.NoclassDef Found Error:GUIFrame
    and a about 8 other lines of complaint.
    ("GUIFrame" being one of my classes in the jar file)
    when building the jar file i have not stated each class individually but used the wild card. would this cause a problem. I have also made sure ALL files invloved are all in the same subdirectory.
    COULD SOMEBODY PLEASE HELP I AM GETTING A BIT F.R.U.S.T.R.A.T.E.D AFTER MESSING WITH THIS FOR 6 HOURS TODAY!!!!. (calming down now ahhhhhh.)
    Hoping somebody can tell me what i am doing wrong
    Scott

    Have discovered my mistake at the end of the line "jar cmf mainClass.txt TelDir.jar pStruct.class" pStruct is the class containing my main method as stated in the Manifest but it should read all of the classes required to make my application run or * the wildcard.
    Things always seem clearer the following day.
    When you say post the contents of the Manifest file how can i examine its contents or do you mean the contents of the text file.
    Now i have my jar file how do i take this further to enable me to deploy my application along with the JRE onto another machine?
    Regards
    Scott

  • Issues with Analysis Authorization checks in APO

    Hi Friends,
    I am facing an issue with Analysis authorization checks in APO.
    We have setup user access based on Management Entity (Analysis authorization - AGMMGTENT and 0TCAACTVT) and core APO authorizations (based on the work profile - e.g: Demand Planner).
    Scenario: Consider User A has access to India and Australia Management Entities with 0TCAACTVT - *
    This user also has display access to all management Entities (AGMMGTENT - * and 0TCAACTVT - 03). This scenario works very well in Quality where the RSECADMIN trace shows check on both Characteristics. However in Production the RSECADMIN trace shows up only against AGMMGTENT (*) and by default takes 0TCAACTVT as (*).
    In Quality the Characteristics that get checked are as below : and it works as expected. Display access for Management Entities that are supposed to be displayed only and change access to only the Management Entities that it should.
    However the Trace for Production shows the following : As a result it is allowing the user to change access to all management Entities. Which is not desirable..
    Resultant trace results are as below: This should not happen..
    I have compared all Analysis Authorizations and it is same across both Instances. The Demand planner access is consistent too..
    Will it be possible for you to advise on what could I be missing.

    Hi All,
    If it helps, in Quality: the Authorization checks are listed as: Subselection (Technical SUBNR) 1
    while in Production it checks Subselection (Technical SUBNR) 1 in one place, however where it fails - the check happens as Subselection (Technical SUBNR) 0.
    Is there a way we can change this to SUBNR 1. Is there any table entry that I can look at to check if the Authorization check is functioning incorrectly..
    Please advise.. Thanks..
    Regards,
    Prakash

  • Windows 8.1 rebooting overnight with a bug check

    Windows 8.1 is rebooting overnight with a bug check in the system logs.
    Event files saved:
    https://onedrive.live.com/redir?resid=7DE1274A30A8AE63!1788&authkey=!AGhpLBq-8hDqCok&ithint=file%2c.zip
    I also tried verifier to check out device drivers but could not figure out how to use it.  I got it configured and started, but did not know what to do once the computer rebooted....   Sounds like I need to download a windows debugger and
    so I thought I would start with the event log files.  Any link on how to interpret the even logs, dump or mini dump files?
    Thanks,
    Ross

    Hi,
    According to the Event Log:
    Session "ReadyBoot" stopped due to the following error: 0xC0000188
    After that:
    The previous system shutdown at 7:07:39 PM on ‎6/‎3/‎2014 was unexpected.
    This problem probably caused by ReadyBoot problem, While you needn't worry about it,
    The logging of this error will not affect the operation of your computer.  ReadyBoot is used by the ReadyBoost service that optimizes the boot time of your computer to a minimum.
    You can refer to the link below for more details about this error:
    http://support.microsoft.com/kb/2001347
    In addition, I found another error message in your event log:
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x00000019 (0x0000000000000020, 0xffffc0016d9657f0, 0xffffc0016d966040, 0x000000000585000a). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 060314-18953-01.
    If you still need assistance about this problem, please upload the memory.dmp file and share with us. We would help you try to analysize this log to find further reason of this problem.
    Roger Lu
    TechNet Community Support

  • This is an error from my HP scanner. How can I fix the problem? An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

    I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An  error has occurred saving the file because it could not be written to.   Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
    Thank you

    This worked for me:
    "Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
    "Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
    I found it here:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105

  • Could Somebody Please Explain....

    Could somebody please explain what this section of code is doing with the StopTime? There is plenty more code where that came from, but as I can see it, it is being put into a vector in another section of code as endTime, the vector pdmlist, which I think is where or hows its stored in the vector is being set to null? Then pdmlist is using EndTime value? The StopTime is then being set to a string.
    StopTime is then set to blank, then the DateDataFormat is being used. The pdmlist comes back into play, then the df (date format) comes back and it gets converted to uppercase and finally outputted using the outStream.write method to the log file that is created (earlier).
    So my quest, as per the other mail, why wont the DB query and order by, order it for the output to the log file. What is the vector doing to it to unsort it? How can I order it?
    Vector pdmList = null;
    this.setCursor( Cursor.WAIT );
    if ( radioAllTime.getChecked() )
    pdmList = pdmHelper.buildPDMList( ctx, null, null );
    else
    pdmList = pdmHelper.buildPDMList( ctx, dateBeginTime.getValue(), dateEndTime.getValue() );
              this.setCursor( Cursor.DEFAULT );
    //If nothing was found, then display a message,
              //and return.
              if ( pdmList == null )
                   MessageBox.show( "No parametric data found. Log file not generated." , this.getText() );
                   return;
    if ( pdmList.size() == 0 )
                   MessageBox.show( "No parametric data found. Log file not generated." , this.getText() );
                   return;
              String Temp;
    String Board; // Prodid
    String StartTime;
    String StopTime;
    String Part;
    String BoardStatus;
    String Actual;
    String LoLim;
    String HiLim;
    String MeasStatus;
    String PartType;
    String PartNumber;
    boolean BoardStatusContext = false;
    boolean OneMeasureFailed = false;
    java.util.Hashtable htFiles = new Hashtable(10,10);
    FileWriter outStream = null;
    try
    for ( int idx = 0; idx < pdmList.size(); idx++ )
                        //Reset the flags
                        BoardStatusContext = false;
                        OneMeasureFailed = false;
    Board = ""; StartTime = ""; StopTime = ""; Part = ""; BoardStatus = ""; Actual = "";
    LoLim = ""; HiLim = ""; MeasStatus = ""; PartType = ""; PartNumber = "";
    com.ms.wfc.data.DateDataFormat df = new com.ms.wfc.data.DateDataFormat( com.ms.wfc.data.DateFormat.CUSTOM,
    "dd-MMM-yy hh:mm:ss" );
    // get root context
    PDMContext context = ((PDM)pdmList.elementAt(idx)).getContext();
    //Make the filename
    String fileName = context.getProductName();
    if ( fileName == null || fileName.length() == 0 )
    fileName = "UNKNOWN";
    // Eliminate not allowed characters from the file name
    fileName = fileName.replace('\\','_');
    fileName = fileName.replace('/','_');
    fileName = fileName.replace(':','_');
    fileName = fileName.replace('*','_');
    fileName = fileName.replace('?','_');
    fileName = fileName.replace('\"','_');
    fileName = fileName.replace('<','_');
    fileName = fileName.replace('>','_');
    fileName = fileName.replace('|','_');
    fileName += ".log";
    if ( htFiles.containsKey( fileName ) )
    outStream = (FileWriter)htFiles.get( fileName );
    else
    File theFile = new File( fileName );
    statusBar.getPanels()[0].setText( "File: " + theFile.getAbsolutePath() );
    /* if ( ! theFile.canWrite() )
    statusBar.getPanels()[0].setText( "Failed: " + theFile.getAbsolutePath() );
    MessageBox.show( theFile.getAbsolutePath() + " can not be writen!",
    this.getText() );
    outStream = new FileWriter( theFile.getAbsolutePath(), false );
    htFiles.put( fileName, outStream );
    // start writing the log file...
    outStream.write( "./" );
    StartTime = ((String)df.format( null, context.getStartTime() )).toUpperCase();
    StopTime = ((String)df.format( null, context.getStopTime() )).toUpperCase();
    Board = context.getProductName();
    if ( Board.length() == 0 )
    Board = "UNKNOWN";
    outStream.write( Board + ".obc[" + StartTime + "\r\n\r\n" );
    Sorry the mail is so long. I tried books, but vectors were hard to come by? I've searched through the database on this site too, there are plenty of stuff about sorting and vectors but its hard to use somebody elsed situation for my own circumstances as a guide.
    Hope somebody could just shed a bit of light.
    Thanks in advance.
    Mark.
    PS. I will give duke points (when I work out how to add them, but I only have 5....sorry)

    Does anybody have any ideas as to what is happening.
    Mark.

  • HT204380 have anyone have problem activating their facetime? it says...could not sign in. please check your network connection and try again. please help.

    when activating facetime, it says...could not sign in. please check your network connection and try again. never tried facetime with my account. i tried to register with other apple ID but it does not help. please help.

    a lot of us are in the same boat - no help from anyone as of yet

Maybe you are looking for