Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?

Hello there,
Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?
Thanks!

www.privium.nl
klick the icon image 'virtual tour' upper right corner.
This works on my other pc, on which I did not update to 10.1 ...
(I produced this virtual tour; it is stored on the FTP server of the service provider I use for this)
Awaiting your reply,
Regards,

Similar Messages

  • Why Flash and videos don't work after 10.6.7 update?

    After os update Flash, Shockwave and videos stopped working on Safari. Also Flash CS5, Flash Builder 4 and Flash Catalyst CS5 stopped working. An error message on Flash CS5 "Error initializing Java Runtime Environment. You may need to reinstall Flash." I have uninstalled and reinstalled stuff, fixed the HDD errors etc but so far no solution. Is this simply error in update software made by some tired engineer?

    2 Suggestions:
    1) Try reinstalling Mac OS X 10.6.7 via Combo Update, it's a common troubleshooting step:
    http://support.apple.com/kb/DL1361
    2) Have you installed the latest Mac OS X Java Update 4?
    http://support.apple.com/kb/DL1360
    I would also suggest to check Adobe's Support Page to see if other users are experiencing the same:
    www.adobe.com/support
    Good Luck!

  • Why my iSight camera stopped to work after update to OS X 10.9.2?

    I think the new update to OS X 10.9.2 broke something here. iSight it's not showing up, so FaceTime and Photo Booth don't work anymore.

    lastday wrote: ... I don't know where "ScreenRecyclerDriver" come from, ...
    It was created when someone installed ScreenRecycler on your system.
    ScreenRecycler is a third-party add-on. ScreenRecycler  system requirements show the OS X 10.8 release version is still in beta.  It is possible that you have updated your Mac OS but not yet found a compatible version of ScreenRecycler.
    ScreenRecycler is also mentioned in multiple other Apple Discussions problem topics including these:
    Loose all logins with ScreenRecyclerDriver: Apple Support Communities
    Safari won't open - crashes immediately: Apple Support Communities
    Kernal Panic after mountain lion install: Apple Support Communities
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Why won't my HDMI output work after update my iPad to iOS6?

    After updating my iPad to iOS6 it won't play my videos on my tv via HDMI cable. The tv displays "invalid format" I don't know how to chnage the display settings on the iPad because maybe there are none. Is there some backdoor way to change the settings so maybe I can use my $40+ cables I bought?

    This is vatastrophic! I came to a congressional doctor meeting to give a lecture! It would't work!! Only iphone 4 projected muzzy picture and only on photo show!
    Are they crazy? Why did they fricked it up?
    Both were updated to iOs6!!!

  • Could someone explain the purpose of "webscan" feature , I don't get it

    What does "webscan" do ?
    This question was solved.
    View Solution.

    Hi satwar,
    Webscan is a feature which is available in the EWS - Embedded Web Server. You can use it to scan a document, and then save it to your computer. Just another method of scanning a document.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Why doesn´t sync the calendar work after updating iPhone 3G to version 2.21

    Help!!!
    I updated my iPhone 3 G yesterday to the latest version 2.21. Unfortunately the update didn´t work properly, so I changed the USB plug-in and started again. This time I had to do a complete reinstallation of firmware and software. Everything worked well so far. My phone was recognized again and was updated to version 2.21. But when I wanted to sync the contacts and calendar (with Outlook 2007), videos, fotos, music and programs, the sync didn´t go on when the calendar should be synchronized with Outlook 2007. Another complete reinstallation didn´t help either. So what can I do?
    Best regards
    klaus 1003

    I have similar problems and spent nearly 2 hours on the phone with Apple support to no avail. Here are the specifics.
    I updated my 3G to 2.2.1 and the sync did not take, though it left my laptop iCal in tact. Apple had me do the following: Hard reset of the phone; restart the computer; restore iPhone; Run the following in Terminal: /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsyn c.pl full;run killall (i forget the rest) in Terminal; wipe clean and create a new user on the iphone and sync; numerous other ineffective attempts including discarding a sync related folder. Nothing worked. I could, at one point, sync iCal, but only "all day" events synced but that no longer works either. Also, my mail accounts were lost, but I had no problems with my music or apps. iCal and Mail are the two main reasons I have an iPhone :-P
    Apple support was great and even made an appointment for me at the Apple Store, but I don't think I'll be going. Especially if Apple doesn't come out with 2.2.2 in the next 2 days.

  • HT4972 why is my iphone 3g not working after updating

    while updating my iphone 3g to latest ios version it has now stopped working . The setup comes but when i activate it after selecting language and country it does not respond to either itumes on my laptop or wi-fi.

    The issues you describe are typically the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided via these forums.

  • I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

    I know this isn't really the right place to ask, but could someone explain why when I open Portal 2, that I got off steam and spent a whole day downloading, keeps crashing when I click the Campaign/Single Player mode. It Freezes and then crashes. Help!

    I know this isn't really the right place to ask...
    Uhm, why don't you go to the right place, then? There are several Steam/Portal forums out there...

  • Could someone explain why mds is using so much CPU?

    Could someone explain what mds is doing if my Mac has been indexed (don't see activity in Spotlight menu bar icon) & I haven't recently added a lot of files?
    I noticed my Mac was slowing down for a while so I looked in Activity Monitor & it says mds is running at 60% CPU. Isn't this something to do with Spotlight indexing?

    If you recently upgraded the OS or installed an application that includes a metadata parser for spotlight (such software generally comes in the form of a package instead of a single icon), it will force spotlight to reindex. Also, restoring from a backup does the same thing.
    Also, if you used mdutil to disable spotlight indexing on the volume and then reenable it, it will force a reindexing.

  • Could someone explain what is wrong with this refind expression?

    Hi, could someone explain what is wrong with this refind expression
    faultCode:Server.Processing faultString:'Unable to invoke CFC - Malformed regular expression "^[0-2][0-9][/][0-1][0-2][/][1-2][0-9]{3}+$".'
    thanks

    ^[0-2][0-9][/][0-1][0-2][/][1-2][0-9]{3}$ works,
    thanks
    dates 12/12/2007matching

  • Could someone explain me about tools like "RICEF"

    Hi Guys,
    Could someone explain me about tools like "RICEF"(I dont know if iam spelling it correctly) and ASAP methodology. Iam wondering how this are related to SAP upgrade and fresh SAP implementation.
    Many thanks in advance.
    Warm Regards,
    Garrick.

    Hi
    It would be helpful to go through the help document of ASAP Methodology.
    The following information may clarify some doubts/requirements you have.
    Generating the Project IMG through ASAP:
    After you have set the project scope, the next step is to generate the Project IMG. From the Business Process Master List (BPML), you can directly access the IMG activities relevant for configuring each process.
    BPML: The Business Process Master List, along with the Business Blueprint, is a key result of the second phase of the Roadmap. Microsoft Excel tables contain the SAP scenarios, process groups, and processes that have been set in scope in the SAP Reference Structure, and are crucial for configuring your SAP System. In Realization, the third phase of the Roadmap, the BPML provides the basis for monitoring and steering test activities and for configuring your SAP System. It contains the titles of the structure items, and displays the status, the owner, links to documentation and links to the SAP System. Amongst other things, the BPML allows you to:
    1) Set your baseline and final scope. These are used for baseline and final configuration.
    2) Access the Project IMG and specific IMG activities assigned to structure items.
    3) Access integration test plans, which help you carry out all required integration tests.
    The Prerequisite is you have set the project scope.
    Process Flow to use the Business Blueprint as a basis for configuring your SAP System:
    1) Set the project scope.
    2) Generate the Project IMG.
    3) Generate the BPML.
    4) From a specific processes in the BPML, you can go to the relevant IMG activities and make Customizing settings.
    Hope this information provides information
    Check the following link for downloading the complete reference document on ASAP.
    http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/SVASAP.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASAQADBCBI/QADBCBI.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASACCT/SVASACCT.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASAPROZ/SVASAPROZ.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASQADBS/Q&ADBSTRUCSTAN.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SVASAPE/SVASAPE_01.pdf
    Regards

  • When running labview's test executive I recieve runtime error: Call to step "PRE-RUN" failed. Could someone explain this error?

    I have a set of vi's that work when run under labview. However, when calling these vi's from labview's test executive I recieve runtime error: Call to step "PRE-RUN" failed. in Assign Connector Pane.vi->Call Test.vi->Execute Pre-Run.vi->Test Executive. Could someone explain this error to me? (or ideally tell me how to fix it?) Thanks.

    Hello,
    There are any number of possible causes to this problem. Which version of Test Executive are you using? Have you upgraded your Test Executive recently? The latest version is 5.1.1. If you have changed anything about Test Executive on your computer recently, I recommend you perform a mass compile of all your VI libraries, as having different versions of the VIs on your system could often result in the "Call to Step XYZ Failed" errors. Also, are you using any DAQ or Analysis VIs in your steps? We have seen problems where the use of DAQ or Analysis VIs in the sequence can cause intermittent "Call to Step...Failed" errors. There are some KnowledgeBase entries on our website that discuss this problem. Are you using the Test Executive in the VI environment, or
    as an executable? Again, there are some problems with using Test Executive as an executable that result in these errors, and there are also KnowledgeBase entries that discuss these problems.
    If you have a pared-down application that demonstrates the problem, feel free to send me your VIs and your .seq file and I will try to reproduce the problem.
    Alternatively, I would suggest you visit www.ni.com/teststand to learn about TestStand, our state-of-the-art Test Sequencing software that completely outperforms Test Executive. It is very easy to use and much more powerful, and we have a top-notch support team available dedicated exclusively to supporting TestStand. As you are probably aware, we are no longer developing Test Executive, and instead are concentrating our efforts on making TestStand the penultimate solution for all our customers' test sequencing needs.
    I appreciate your patience on this issue. Please let me know if I can offer further assistance.
    Have a pleasant weeken
    d.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • My iphone has no service. can someone explain to me why?

    my iphone 5s has no service. can someone explain to me why?

    Philo is right but try this, removing sim card and put it back again, go to settings/general/reset and reset network, hope this solve ur issue. if not ask ur cellphone carrier.
    Good luck

  • Could someone explain the Factory Method Design Pattern

    Hi Experts.
    Could someone please explain for me the Factory Method Design Pattern. I read it a little and I understand that it is used in JDBC drivers but i'm not clear on it.
    Could someone explain.
    Thanks in advance
    stephen

    Basically, you have one class that's sole purpose is to create instances of a set of other classes.
    What will usually happen is you have a set of related classes that inherit from some base class. We'll say for example that you have a base class CAR and it has sub-classes FORD, GM, HONDA (sorry Crylser). Instead of having the user call the constructors for FORD, GM, and HONDA, you can give the user a Factory Class that will give him a copy. We'll call our factory class Dealership. Inside dealership, you can have a static function :
    public static Car makeCar(String type)
    if(type.equals("FORD")
    return new FORD();
    else if(type.equals("GM")
    return new GM();
    else if(type.equals("HONDA")
    return new HONDA();
    So when the user needs a car, they will just call
    Dealership.makeCar("FORD").
    This is a good way to hide the implementation of your classes from the user, or if you require complex initialization of your objects.
    Another good example of this is in the Swing library. To get a border around a component, you call static methods on BorderFactory.
    Hope this helped.
    Ed

  • Could someone explain what is Object?

    Could someone explain what is Object? I have a little
    idea what is it, but not sure. Please give me some
    concret example. Thanks.

    An object is an Instance of a class. A class describes a uniwue entity with behaviors and attributes. For example you can consider your arm.
    public class Arm {
      /** How many hairs on the arm. */
      private int hairCount;  // <== This is an attribute
      /** This is a method to set the hairCount Variable.
       * We dont let the outside user set it directly because that would
       * create problems if we wanted to change its implementation to
       * use a float. In addition we might have logic in this setter to
       * prevent bad data.
      public void setHairCount(final int hairCount) {
        // this is a good example of logic in the set method that we dont
        // want the user to bypass.
        if (hairCount < 0) {
          throw new IllegalArgumentException();
        this.hairCount = hairCount; // <-- Note how we have to use this. to
                                    //     access the instance variable
                                    //     insead of the parameter.
      /** This is a method to move the arm.
       * This is behavior of the class. ONLY behavior pertaining to an arm
       * belongs in the arm class. For example, the method "sneeze" would
       * not belong here but be in the Nose class instead. You can see then
       * that each class describes an entity.
      public void move() {
        // code to move the arm.
    }We have only ONE class per type but we can have many objects. For example the description of an arm does not change no matter who'se arm it is. The data in the class changes but not the actual essence of the arm. So we instantiate two arms for every person (assuming they arent disabled). To instantiate is to create a new object like so.
    Arm myarm = new Arm(): This creates a new object that we can work with.
    So consider the old inteview question of, "What is the difference between a class and an object?" The answer is, "A class is a map or desription of an object; whereas an object is a descrite instance of a class."

Maybe you are looking for