Could someone help me figure this out (screenshot)

What is happening here? This is under shared...

Your mac is not disconnecting from the share properly, so each time you log on it thinks that there is another mac connected to the network with the same name.
There are a few places to look to try and solve this issue.
1. Reset your router. Sometimes the router it to blame.
2. Are you using more than one port for network connection. i.e. wifi and ethernet? Try turning one off.
3. I have seen that repairing permissions sometimes cures this conflict.
Hope this helps.
PJRS

Similar Messages

  • I would like to change the owners name on my ipad2 to my daughters name and credit. Could someone help me figure this out?

    I would like to change the owners name on my ipad2 to my daughters name and credit. Could someone help me figure this out?

    Sign out from Find My Phone in iCloud, and sign out from your Apple ID in Settings/iTunes & App Store
    Then setup as a new phone with iTunes and when your Daughter sets it up for the first time she can add or set up her own Apple ID.
    Cheers
    Pete

  • I'm having issues loading Youtube on my MacBook Pro for about a week now.  I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine.  Can someone help me figure this out?

    I'm having issues loading Youtube on my MacBook Pro for about a week now.  I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine.  Can someone help me figure this out?

    Hi, I had been having the same problem for over a week, but both my window's HP and my 2011 macbook pro barely could load youtube.  What kind of router you have?  I was using a belkin play router that was only 8 months old, switched to a new AirPort Extreme Base Station and now everything works perfect.

  • So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • Why can't I figure out how to change the music on my Iphone??? Someone help me figure this out PLEEEEASE!!!

    I must be stupid because after searching the website and even asking for tech support(NO HELP) I can't figure out how to switch out the songs on my Iphone. I have more music saved on my computer than will fit on the phone and I want a new set of songs to listen to. Can someone break this down for me please???
    BTW...I have an Iphone 3GS

    Content on your iOS device (iPhone/iPad/iPod) are all managed by iTunes. You can limit / select /randomize what is synced by selecting your iPhone under the Devices list, set your preferences and click Apply.
    See this Video Tutorial http://support.apple.com/kb/VI72?viewlocale=en_US
    For a full list of Video Tutorials for iTunes go to http://support.apple.com/videos/#itunes
    Message was edited by: J D Knight III added links

  • My iMovie is not working, it tells me there's a problem but does not know the problem, Can someone help me figure this out please?

    A couple of days ago, my I opened up my iMovie and it just goes into the blank screen. I am able to click on things like, "import" or "create" and it will take me into the next window, but when I choose an option, I receive a message that there is a problem, but they don't know what the problem is. It has been like this for the past couple of days. I have deleted and re-downloaded the app about 3 times and it still comes out the same. Please assist in any way possible!

    Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    When it's rebooted you can force a backup via Settings > iCLoud

  • I have home sharing on my main computer turned on.  But I can't access it from my other computer, ipad or apple tv.  I don't even see the home sharing tab on the left side tool bar on my main computer.  Can someone help me figure this out?

    How do I get this to work properly?

    iOS: Setting up Home Sharing on your device
    Setting up Home Sharing for Apple TV (2nd generation)
    Troubleshooting Home Sharing

  • HT204053 i am missing pictures on my ipad 2.  i have checked photo stream and camera roll.  actually they were there earlier but now gone.  i also use dropbox as well, and can't find them there either!  Can someone help me figure this out?

    Missing photos from camera roll and photo stream.  i also have been using dropbox.  Will someone tell me how to find them?  they were there yesterday, and i did not delete any?

    Unless someone physically deleted those, you describing practically impossible situation. Even deleting from camera roll would delete from photostream possibly, but not if you manually put those in dropbox and they had time to upload.

  • Can someone help me figure this out....

    I just recently downloaded iTunes again on a new desktop and it would be my first time syncing my phone to this iTunes and desktop and when I went to sync my apps it said this.... "all existing data on iphone will be replaced with applications from this itunes libary" but there isn't nothing there cause I never synced my phone into it so if I choose yes will it delete all my apps?

    The first thing you need to do is right click your phone name and back everything up to your computer.

  • TS2755 Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number.  Could someone help me with this??

    Whenever I send a message to another iPhone user via iMessage it is sending my Apple ID instead of my phone number. Could someone help me with this???

    Check this article: iOS: About Messages
    Additional Information
    You can change your iMessage Caller ID setting on iOS devices in Settings > Messages > Receive At > Caller ID. Note that the Caller ID setting is used only for new conversations. If you would like to change the address from which messages are sent, first change your Caller ID, and then delete the existing conversation and start a new one.
    iMessage responses will be sent from the address the recipient most recently messaged. For example, on iPhone you can receive messages sent to your Apple ID and phone number. A friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if your Caller ID is set to your phone number.

  • Seems I have a iClould account but not sure how I got it or how to access it on my iPad.  Any help in figuring this out would be appreciated.

    Seems I have a iCloud account on my iPad but not sure how I got it as I do not remember signing up for this feature.  I got an e  mail message saying I was running out for space on my iCloud and was given directions on how to find it on my iPad.  I followed the directions but there was no iClound anywhere in my iPad settings.
    Any help in figuring this out would be appreciated.   

    If your iPad is running iOS 5 or higher, iCloud would be listed in Settings.  If you are signed into an iCloud account your iCloud ID would be listed in Settings>iCloud.

  • Yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd

    Are the lines like psychedelic herringbone?  If yes, I had that happen once, it was something serious, like the
    Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP.  I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
    Good luck and don't panic.

  • Every time I open iMovie, the program doesn't respond. The Wheel comes up and I have to force quit. Can anyone help me figure this out so I can work on projects? if it helps, I'm running OS 10.5.8

    Hi, My iMovie program stops responding upon opening.  I can't figure it out.  I haven't really used it in the past but I would like to start.  My Mac is one of those aluminum Macbooks that look like a macbook pro and were on the market for a little bit.  I'm running OS 10.5.8 and its on the most recent update for the operating system.  I don't know how to correct the glitch. Any help would be great! Thanks
    -E

    OK, you have iMovie 08, which is also known is iMovie Version 7.1.4. It has been a few years since i used this version, so this is based on memory.
    The only components you must have in the Library/QuickTime folder are the AppleIntermediateCodec.component and the AppleMPEG2Codec.component.
    All the others could potentially be causing problems. I would drag the DivX components, the Flip4Mac components, and the Google Camera components to the Desktop temporarily, so nothing is left in this folder except the two Apple components.
    Then restart your Mac and start iMovie. If it works, yay!
    If you still need these other components for some other app, you can probably get updated DivX components for free at Perian.org.
    You can get updated Flip4Mac components by running WMV Player and updating. It should prompt you to update automatically.
    I am not sure about the Google components, but if you are running something that needs them, it should prompt you to install the current versions.
    If none of that works, post back.

  • Could someone help me solve this problem?

    Could anyone help me, I'm with Adobe Creative Cloud after being installed it but it does not usually performs correctly and as shown in the image below. I am Brazilian is'm using google translator.

    Hi Juliane sanchez,
    Please refer to links below where the issue stands resolved:
    1. Blank white screen | Sign in | Creative Cloud Packager
    2. New Creative Cloud App unusable: it's blank!
    3. Re: creative cloud is blank window why?
    Regards,
    Sheena

  • Could someone help me figure out why after saving a form some subforms are hidden again

    I am asking this on behalf of a coworker.  We have a form she is working on with a drop down (ddlDropDown) with 1, 2, and 3 listed (same values,,1,2,3)  That trigger hidden subforms to appear (Employee1, Employee2, Employee3).  Initially, Employee1 is visible.  If form user selects 2 or 3 in the dropdown then Employee2 and Employee3 become Visible.  Once the form is filled in, saved, closed and reopened Employee2 and Employee3 are hidden again even though the dropdown says 2 or 3.  The script behind the dropdown's change event is:
    subSELECT.Employee1.presence=this.rawValue==1?"visible":"hidden";
    subSELECT.Employee2.presence=this.rawValue==2?"visible":"hidden";
    subSELECT.Employee3.presence=this.rawValue==3?"visible":"hidden";
    I have tried adding this code to the form's initialize, docReady, preOpen, postOpen, layout:ready events but it still doesn't work.
    Any ideas?

    Here is a sample I created based on your comments and it works just fine for me after saving the form.
    Employee2 and Employee3 subforms have their presence property set to hidden.  I have the script in the exit event of the dropdownlist.
    Here is the sample:
    https://workspaces.acrobat.com/?d=YWMOMIyD2lLEqPSdO0vqYQ

Maybe you are looking for