Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone...
Could someone please advise on my current problem? Apparantly I can no longer download tones to my phone or account to be used as such since the tones are being downloaded as songs that cannot be transferred or placed in the tones area for the phone or in iTunes. Prior to the last update, this was always an option. I have also noticed that the Ringtones and Alert Tones are not showing up in my recent purchases as well to allow for me to place them back on my phone and there for require for them to be purchased again... Any help would be greatly appreciated!
I've discovered that all tones purchased will be downloaded as ringtones, BUT they can be utilized as tones and assigned as alert tones on the iPhone...
Similar Messages
-
i recently had my computer fixed as it was loaded with viruses. Also I finally got my IPad 1 back from someone who had "borrowed" it for a year. It no longer worked, but in the case i had written down my old apple id. i had purchased 3 other ipad's since then and changed my id. i typed the old id and was delighted to see that i had over $1000 worth of dowmloaded media. i want to use this old acct number on one of my other IPads to avoid confusing two accts, but when i attempted transferring media onto computer it said i needed to first download bonjour. i have been trying to figure out how, but computer genius i am NOT. could someone please help me? i really appreciate any advice you could offer steering me in the right direction with this. thank you, stacey v
Hey staceylynn261!
Bonjour is a program that is installed on your computer along with iTunes, so you will want to first uninstall iTunes and all of its related components:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
You will then want to visit this link to download and install the latest version of iTunes:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
When I try to go to ilcoud I get 'script problem' and can't enter. Please advise what I should try. Thanks.
I use e-trade and a couple of times, years back, I found them behind the Java updates.
So, now I install new Java platforms on my backup disk and test the streaming data on that first because I know it will be over-written that evening with my nightly backup.
Of course, since I began doing that there hasn't been a problem. Do the same with printer driver updates.
Anyway, call ScottTrade and howl! Tell them how many Macs are out there and why aren't they in Apple Developers Program? -
Could anyone advise me about OCR software please. I have published books which are now out of print (hard copy only) which I would like to republish as eBooks. However I am uncertain of just what software I should invest in to scan in text particularly as there are hundreds of pages.
I think this software is best OCR - Abby Finereader
http://finereader.abbyy.com/ -
Could someone please advise on how to restore back to the IOS 6. Thanks
You cannot. Apple has never supported any method to downgrade iOS.
-
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
Please help, i used to have various colors to select from when selecting FILL in Keynote such as red, now I only have a few pastel colors. I cannot seem to fix this problem to get the original colors back. Can someone please advise what I need to do.
i have on my ipad2 and re-download it - but I can't afford to loose the presentation that I currently have ....??
Are you using Keynote on an iPad?
If so you posted in the wrong forum, this is the Keynote Mac discussion and it is a different application. I dont know how the iPad works at all, so I cant help you, post in the Keynote iOS discussion.
If you are using a Mac, the colours palette is accesed by clicking on the colour well (arrowed) and then selecting a colour chip or changing the color in the colour wheel. -
I have a Mac mini Snow Leopard. In Numbers the grid lines are so faint that they are barely visible. Pleease could someone help me sort out this problem?
The User Manual has this:
Formatting Table Cell Borders
You can change the line thickness and color of table cell borders. Or you can hide the border of any cell.
To format table cell borders:
1 Select the cell border segments you want to format.
2 Use the controls in the format bar or in the Table inspector.
Click to choose a stroke color.
Click to choose a stroke style.
Click to choose a line thickness.
Stroke pop-up menu: Lets you choose a stroke style. Choose None to hide borders.
Line thickness: Controls the thickness of the stroke.
Color well: Lets you choose a stroke color.
When you click the color well in the format bar, a color matrix appears. Select a color by clicking it in the matrix, or click Show Colors to open the Colors window for additional color options.
When you click the color well in the Table inspector, the Colors window opens.
User Guide: http://manuals.info.apple.com/en_US/Numbers09_UserGuide.pdf -
Could Adobe please advise if they will be adding tethering support for Nikon D600
Could Adobe please advise if they will be adding tethering support for Nikon D600 as it is instrumental to our decison regarding purchase.
Many thanksssprengel wrote:
Nobody is happy with the answer about old software not getting updated with new cameras, but if you look into it, Adobe had to lay off about half their employees over the past few years to keep the company viable in the declining economy, so they don’t have extra people to update and test plug-ins for non-current versions, and if they did, then some people wouldn’t buy the newer version and they’d have even less money.
Adobe has only just gotten the D600 supported for raw format in their current beta version of LR, which affects everyone with a D600, and if they had to wait for Nikon for supply and SDK and also have to prioritize their work to keep things on schedule, tethering is likely to lag behind raw-file support for any particular camera. Apple controls their entire computer environment, hardware and software, so it’s not surprising they can implement tethered capture from day one, but Adobe must figure things out for OSes they don’t own, both Mac and PC, so they rely on waiting for Nikon to do things for them, and then figuring out how to get it to work.
Well boo hoo for Adobe ... life sure is tough for them ... if they can't handle the load maybe they should get out of the business of software development ... They can't be all that worried about revenue to support Lightroom development or they wouldn't have reduced the price of the full version by 50% and the upgrade price by 20% ... it was a less than smart move considering they have been bragging for the past couple of years about how many more folks use Lightroom vs. other competitive options ...
Aperture 3, Capture One both have tether support for the D600 ... and many more cameras than are supported by Lightroom ... those developers are working and engineering solutions in the very same economy as Adobe (and C1 supports both platforms as well, costs much more than Lr and employs far fewer engineers) ... why aren't they suffering from the same lack of support? ... or using the camera makers to deflect blame for the lack of results?
Excuses are not solutions ... -
Could someone PLEASE tell me how to set up more than one POP mail account.
I am soooo frustrated. Before I upgraded to Tiger I had no problems setting up my mail accounts. Now, I can only set up one POP mail account. I have three mail accounts that I desperately need to set up from the same ISP server, all POP accounts. On Panther and earlier, all I had to do was add the accounts. Now I have ONE POP account and when I try to set up another I get an error message that I already have a POP account set up. Why is this happening and what happened to the old system that worked just fine. I am so annoyed with this. It simply defies logic!!!!
I don't know if this will work or not, but why don't you try using bogus pop and/or smtp server information when you initially establish the accounts with Mail's setup wizard? Just continue through the "warning: cannot validate server" messages that the wizard will give you. Then go into Mail > preferences > accounts and highlight each of the new accounts, one at a time, and try changing the incoming pop and outgoing smtp mail server information to what it is supposed to be?
For the "Outgoing" server just use the pull-down menu, to select it, and when all accounts are done, go into that same pull-down menu and choose "Edit Server List..." to remove the bogus smtp server information.
Incoming should be just renaming that pop server in the "Incoming server" field.
If that doesn't work, I've got something riskier you could try, again with no guarantees, and that is editing your ~/Library/Preferences/com.apple.mail.plist file using either the Property List Editor that comes with XCode Tools (will launch automagically when you click on that .plist file if XCode is installed) or with the pico editor in Terminal, and possibly renaming some folders in your ~/Library/Mail folder, too. Again, start with the bogus server info, then find those entries in the .plist file and make changes there.
Note: if not familiar with the notation, "~" means your "home" directory.
(if this solves your problem, or is actually helpful towards arriving at a solution to your problem, please consider marking this reply as "helpful" or "solved," in addition to, if applicable, marking this question as "answered") -
Could someone please sketch out this simple script for me?
Could someone please sketch out a simple java script for me. I will have a document with one background
layer and a layer set (group) called "Analyze" that consists of 63 adjustment layers. The layer names in that "Analyze" group(folder) will be
"01" ...through "63" with 01 on the bottom and 63 at the top. Initially, all of the adjustment layers will be invisible and the
group will be closed (not expanded). I need a simple script that will check for the first invisible layer in that group
and make it visible without selecting that layer nor expanding the group. The script has to check
for the first invisible layer every time it runs because other actions may have turned off a layer in the set.
The point of this is so I can hotkey flipping on the layers one at a time without expanding the set or
changing focus off the background. It seems it should be a simple loop, but I just can't wrap my head
around all the objects (e.g. Layer as opposed to Layers and Artlayer as opposed to Artlayers)
and the constants constants.
for (i = 63; i>0; i--){ /* I have found layer indexes 0 are the topmost layer */
if( layerset[i] == INVISIBLE){
layerset[i] = VISIBLE;
break;
Could someone please write me a simple script that would do this?
Edit I found this and its very close to what I need:
var doc = app.activeDocument;
for(var i = 0 ; i < doc.layers.length;i++){
doc.layers[i].visible = (i % 2 == 0);
From here : Function to show/hide layer with Photoshop script (JSX) - Stack Overflow
In my case I would rewrite it to this
for(var i = 62; i >=0; i--){
if( !doc.layers[i].visible){
doc.layers[i].visible =TRUE;
break;
My problem is I just need to traverse the layers in my layerset "Analyze"
How do I reference just those? Is there a doc.layersets["Analyze"].layers[i].visible = TRUE?
Message was edited by: Shawn Laughlin To add more informationWell this works:
var doc = app.activeDocument;
var analyze = doc.layerSets.getByName("Analyze").layers
for(var i = 62 ; i >= 0; i --){
if (!analyze[i].visible){
analyze[i].visible =1;
break;
Hard to believe TRUE is not a constant in java. -
Quicktime movie trailers still not playing, could someone please help me?
I have not been able to watch any movie trailers from quicktime for two years now and this is really getting old.
my inf!
computer: DELL
system: Windows XP SP2
QT player version: 7.2
I have all system requirments and updates also allready unselected derctX and selected safe mode, still all I get when loading the movie trailer from QT websight is the white box with QT logo in middle, sometime the logo will also have ?mark over it. I figured it was just taking its own sweet time loading so I wated it out. 4 hours later there was still no change. you'd think apple would have fixed or resolved this problem since it has been ongoing for last two or more years.
Could someone please help me?????????
Message was edited by: scarpredelderTry https://discussions.apple.com/thread/4890398?start=0&tstart=0
See if that helps
Allan -
HT2305 Could someone please give me instructions on how to update my ipad 1 to iOS 5.1?
Could someone please give me instructions on how to update my ipad 1 to iOS 5 or above?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I know that's so 90s, but all the images for iMac 27 Mid 2013 are broken. Could someone please look into that?
Thanks.I can see that too. I am referring to <http://support.apple.com/kb/HT1423?viewlocale=en_US#1>. This is the first link for iMac 27".
Your screenshot refers to <http://support.apple.com/kb/HT1423?viewlocale=en_US#4>.
This is what I see. I am still confident that this is a problem with the image link: -
could you please advise me which cable to buy for my iPad 2 so that I can watch Netflix , film four, and such others on my TV via my iPad, I am getting very confused , many thanks
You need this digital iPad adapter http://store.apple.com/us/product/MD098ZM/A and an HDMI cable.
Cheers, Tom
Maybe you are looking for
-
I am a new user. I attemped to install I cloud on my Windows 7 home eddition. The program starts to install, but then a error message appears stating "There is a problem with this Windows Installer pacage. A program required for this istall to comple
-
Where is the download for the 5.7 update to LR
I am being prompted that there is 5.7 Lightroom update however, when I click the DOWNLOAD button it brings me to a webpage with no download???
-
Oracle Portal and access data from OID
I was trying to do the employee search on Portal. I need to enter firstname or lastname of an employee and click search button and it display employee details These are the steps I followed I created a database provider "Portal1" using the schema Por
-
Tab "A CERTIFICATE NO" found not editable using tcode J1IGA
Hi Guru's We unable to add JV number under tab "A CERTIFICATE NO" due to field is not editable using transaction J1IGA. Will you please let us know the problem, we able to the same in our Quality system. Thanks in Advance, Firoz.
-
Error files in db1\sysman\recv\errors
Windows 2003 SP1 ORACLE 10.2.0.3 There are a lot of error files being generated in \sysman\recv\errors for every database on the server. How can I stop this? It is bieng generated every minute. Can someone help? Regards