Could someone please direct me what to mark or what to unmark to stop receiving email notifications?

I went to My Settings and then to Subscriptions. After many attemps, I am still receiving email notifications. Please help

Here is how it worked out for me :
-       Go to “Subscriptions & Bookmarks”
-       Go to “Email Subscriptions”
-       Select all items
-       In the drop down, choose remove all or delete all (I don’t remember the exact naming)
Alain

Similar Messages

My sons ipod touch apps will not load. you touch them the title screen for the game flicks up then dissappears. Could someone please tell how to fix this or what could be wrong?

My sons ipod touch apps and games will not play. when you touch to game to load it the title screen flicks up and then disappears. please could someone help me to fix this problem or tell me what could be wrong?

I would first try resetting your iPod. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Could someone please explain what P to P and Order to Cash cycle?

Could someone please explain what Procurement to Pay and Order to Cash cycles mean? Thanks.

Hi,
Pl.visit following links for P2P cycle.
http://erpschools.com/articles/procure-to-pay-cycle#13480480234441&79412::resize_frame
http://oracleapplicationsfunctional.blogspot.in/2011/08/procure-to-pay-p2p-cycle-in-purchasing.html
http://www.shareoracleapps.com/2010/05/procure-to-pay-cycle-in-oracle-apps-r12.html
and visit following links for O2C cycle.
http://erpschools.com/articles/order-to-cash-cycle#13480481951911&21367::resize_frame
http://www.youtube.com/watch?v=2GhAbWGz7iA
http://knoworacle.wordpress.com/2008/12/08/data-flow-for-11i-order-to-cash-cycle/
http://oracleapps88.blogspot.in/2012/08/order-to-cash-cycle.html
http://www.slideshare.net/anand5538/order-to-cash-cycle-9647606
HTH
Sanjay

HT201320 i wanted to email my messages history in Viber. But the phone says I can't because I have to change something in the settings. Could someone please tell what to click in the settongs?

i wanted to email my messages history in Viber. But the phone says I can't because I have to change something in the settings. Could someone please tell what to click in the settongs?

How could anyone tell you what settings to change when it's not clear what settings you're referring to?

I am concerned that my new mac screen seems to snaps a pic when I am on certain web sites,I then notice that the "preview" is tagged on. Could someone please explain let me know what may be happening and how to stop this?

I am concerned that my new mac screen seems to snaps a pic when I am on certain web sites,I then notice that the "preview" is tagged on. Could someone please explain let me know what may be happening and how to stop this?

Hey Dollydayle,
The steps in this link can help you with moving your music to your new computer, with several options you can choose from that best suit your needs:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Welcome to Apple Support Communities!
All the best,
Delgadoh

Could someone please explain what "Run Spindump" & "Run System Diagnostics" does in 'Activity Monitor' ?

Could someone please explain what "Run Spindump" & "Run System Diagnostics" does in 'Activity Monitor' ?

Good question. You don't need to worry about running those. They will run automatically when needed by the system. The information they generate (some) is sent to apple automatically (unless that setting is disabled).
If you want to look at the output of these files, most can be found in the console (Utility/Console). Open the app and look at all the system messages your Mac generates....on the right hand side I would bet you already have a crash log or spindump that was collected without you even knowing it.

Could someone please help me . . .

Hello,
Could someone please tell me how to go about writing a java program that would be able to process a statement/sentence. How can I make it is so that when someone types in a statement/sentence and presses enter, the program calculates the total number of words in the statement and whether it ends with a period, question mark, or an exclamation. Could anyone start it off for me so I'd be able to see how it works. My textbook doesn't contain any samples that pertain to this. Just in case you have no idea what I'm talking about, here's what my handout says . . .
Write a Java program to process a statement. You may assume that the statement contains a series of words each separated by exactly one blank space and ending with exactly one punctuation symbol which is either a �period � for a sentence�, �question mark � for a question� or �exclamation point � for an exclamation.� You may assume that the statement fits on one line, it does not wrap over more than one line. You may also assume that no other punctuation symbol is used other than the ending character of the statement.
The program should output:
1.     The type of statement processed (sentence, question or exclamation).
2.     The total number of words in the statement.
3.     The longest word in the statement � if multiple words are of the same longest length � output
the first of those words found in the statement.
4.     The shortest word in the statement � if multiple words are of the same shortest length � output
the first of those words found in the statement.
5.     The number of short words found in the statement (containing 1-3 characters).
6.     The number of medium words found in the statement (containing 4-6 characters).
7.     The number of long words found in the statement (containing 7 or more characters).
Again, if someone would be kind enough to start it off for me or give me an example on how to go about doing it, I would greatly appreciate it !!!!!
Thanks for your time,
Ana : )

public class Austin
public static void main(String [] args)
try {
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String str = "";
while (str != null) {
System.out.print("> ");
str = in.readLine();
StringTokenizer st = new StringTokenizer(str, " ");
/* analyze your tokens here */
} catch (IOException e) {
}

HT2493 Could someone please explain colour tags?

I do not understand the use of colour tags on my Macbook air. Could someone please explain?

The colours are incidental. They are NOT labels any more. You will be frustrated if you try to use Tags to visually find your files.
The advantages of tags are this: you can add as many tags to a file as you like. They provide additional metadata so that you can query your file system. In a typical hierarchical file sytem (folders, subfolder), a file can only be in one place (unless you use aliases).
If I have "Cheeses > France > Soft" as my folders, I can put all the French soft cheese into one folder. But all the English soft cheese are in England > Soft. So what if I want to list ALL the soft cheeses, not just the ones from France? By tagging all the files with "Soft", I can then click on the Tag Smart Folder and list the soft cheeses in both countries' folders all at once.
If used creatively, you could have ALL the files in your Documents folder in one big heap, and then only view subsets of them according to their Tags. Tags represents a complete alternative to using folders to sort your files.
In a sense, a subfolder is simply a Tag in a tree-like structure.
So, instead of trying to visually find some files in a list using coloured labels, you can now query the file system by creating Smart Folders that give you a list of files that match your query: files with Tag X, in folder Y, of type PDF, bigger than 2 MB, containing the word "trumpet".
Visually scouring a folder for files is not as efficient as directly querying the system, even if it is engrained and familiar.

Could someone please run a small test?

Hello out there,
I am getting this compiler error where everything I have read says that what I do should be ok: My interest is to create a 'package level' variable - accessible from any class in the package.
Could someone please perform the following 3 steps and report the results here?
1) Paste the following code into a file Dummy.as located in a suitable directory - adapt the name components accordingly.
package components {
    import flash.display.Sprite;
    var thingies:Array = new Array();          // this is the object of interest
    public class Dummy extends Sprite {}
Your project should still compile - Dummy is not really used.
2) In another component (which of course needs to be active in your project) add a variable like
     var dummy:Dummy;
3) Does it still compile? That's the big question.
When I do this I get the error message
     A file found in a source-path can not have more than one externally visible definition
          components:thingies;components:Dummy
Bumm - show stopper.
BTW the product is Flex Builder 3.0 build (3.0.2.214193)
Thanks and best regards
Helmut

This page indicates the variable should be in the class (and that works for your test code):
http://www.judahfrangipane.com/blog/?p=60
If this post answered your question or helped, please mark it as such.

Could someone please help me with getting the sabnzbd daemon to start?

Hi everyone,
I'm a classic newbie. I managed to follow some instructions I found on the web to get sabnzbd to install (via Yaourt), and when I invoke it from the command line, it works fine.
I've read that you can get it to start as a daemon, which would be really good. Could someone please explain how this should be done?
Where do I need to put the sabnzbd.init file?
What about the sabnzbd.confd file?
I'm okay enough with adding sabnzbd to the /etc/rc.conf file, but I can't quite configure it so that the necessary files are in place to start it.
If you need any details of my setup, please let me know.
Thanks heaps,
Luke

birdie101 wrote:Where would I find a good place to describe how to install programs using PKGBUILDs? and what that process is actually doing?
Apart from the wiki article on ABS, always look at the pkgbuild when in doubt. This is also helpful when you want to know what compile arguments are passed to GCC. Custom postinstall commands are run through .install file (example what is displayed after installation), this is generally foo.install in the AUR for a pkg named foo. And most importantly, familiarize yourself with compiling process, and Arch specific routines like a daemon should be defined in /etc/rc.d/, instead of /etc/init.d/ in other linuxes.
Edit: A best exercise would be to create a pkgbuild yourself. Arch always recommends community contributions.
Last edited by shemz (2010-09-24 08:08:14)

Could someone please sketch out this simple script for me?

Could someone please sketch out a simple java script for me. I will have a document with one background
layer and a layer set (group) called "Analyze" that consists of 63 adjustment layers. The layer names in that "Analyze" group(folder) will be
"01" ...through "63" with 01 on the bottom and 63 at the top. Initially, all of the adjustment layers will be invisible and the
group will be closed (not expanded). I need a simple script that will check for the first invisible layer in that group
and make it visible without selecting that layer nor expanding the group. The script has to check
for the first invisible layer every time it runs because other actions may have turned off a layer in the set.
The point of this is so I can hotkey flipping on the layers one at a time without expanding the set or
changing focus off the background. It seems it should be a simple loop, but I just can't wrap my head
around all the objects (e.g. Layer as opposed to Layers and Artlayer as opposed to Artlayers)
and the constants constants.
for (i = 63; i>0; i--){                 /* I have found layer indexes 0 are the topmost layer */
if( layerset[i] == INVISIBLE){
           layerset[i] = VISIBLE;
              break;
Could someone please write me a simple script that would do this?
Edit I found this and its very close to what I need:
var doc = app.activeDocument;
for(var i = 0 ; i < doc.layers.length;i++){
doc.layers[i].visible = (i % 2 == 0);
From here : Function to show/hide layer with Photoshop script (JSX) - Stack Overflow
In my case I would rewrite it to this
for(var i = 62; i >=0; i--){
     if( !doc.layers[i].visible){
          doc.layers[i].visible =TRUE;
          break;
My problem is I just need to traverse the layers in my layerset "Analyze"
How do I reference just those? Is there a doc.layersets["Analyze"].layers[i].visible = TRUE?
Message was edited by: Shawn Laughlin To add more information

Well this works:
var doc = app.activeDocument;
var analyze = doc.layerSets.getByName("Analyze").layers
for(var i = 62 ; i >= 0; i --){
    if (!analyze[i].visible){
        analyze[i].visible =1;
        break;
Hard to believe TRUE is not a constant in java.

I recently had my computer fixed. there was a million viruses in it, but when i got home and logged onto my second apple id, i found that bonjour was no longer installed. could someone please advise me on how to install bonjour onto my computer?thnx

i recently had my computer fixed as it was loaded with viruses. Also I finally got my IPad 1 back from someone who had "borrowed" it for a year. It no longer worked, but in the case i had written down my old apple id. i had purchased 3 other ipad's since then and changed my id. i typed the old id and was delighted to see that i had over $1000 worth of dowmloaded media. i want to use this old acct number on one of my other IPads to avoid confusing two accts, but when i attempted transferring media onto computer it said i needed to first download bonjour. i have been trying to figure out how, but computer genius i am NOT. could someone please help me? i really appreciate any advice you could offer steering me in the right direction with this. thank you, stacey v

Hey staceylynn261!
Bonjour is a program that is installed on your computer along with iTunes, so you will want to first uninstall iTunes and all of its related components:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
You will then want to visit this link to download and install the latest version of iTunes:
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Quicktime movie trailers still not playing, could someone please help me?

I have not been able to watch any movie trailers from quicktime for two years now and this is really getting old.
my inf!
computer: DELL
system: Windows XP SP2
QT player version: 7.2
I have all system requirments and updates also allready unselected derctX and selected safe mode, still all I get when loading the movie trailer from QT websight is the white box with QT logo in middle, sometime the logo will also have ?mark over it. I figured it was just taking its own sweet time loading so I wated it out. 4 hours later there was still no change. you'd think apple would have fixed or resolved this problem since it has been ongoing for last two or more years.
Could someone please help me?????????
Message was edited by: scarpredelder

Try https://discussions.apple.com/thread/4890398?start=0&tstart=0
See if that helps
Allan

HT1423 Could someone please fix the broken images for iMac 27 Oct 2013 instructions? I miss the webmaster's email on the bottom of the page...

I know that's so 90s, but all the images for iMac 27 Mid 2013 are broken. Could someone please look into that?
Thanks.

I can see that too. I am referring to <http://support.apple.com/kb/HT1423?viewlocale=en_US#1>. This is the first link for iMac 27".
Your screenshot refers to <http://support.apple.com/kb/HT1423?viewlocale=en_US#4>.
This is what I see. I am still confident that this is a problem with the image link:

HT1766 Hi there, could someone please help me, i didnt have my icloud on before my iphone 4s broke. I have always used iTunes and everything was backed up on there and now im finding it hard to restore my phone with contacts, photos etc.

Hi there, could someone please help me, i didnt have my icloud on before my iphone 4s broke. I have always used iTunes and everything was backed up on there and now im finding it hard to restore my phone with contacts, photos etc.

Dear Tylerkeefe,
Good morning. Getting notifications that you are close to exceeding your allowance can certainly be alarming. It would be my pleasure to help put your mind at ease.
I understand you are not streaming movies, music, etc. Which these features will use a lot of data. Are you using the Mobile Hotspot on your phone. This may also cause you to exceed your data allowance quickly if you do not power if off after you are done using the feature. To turn off mobile hostpot tap settings>general>personal hotspot>off. Do you have any third party applications that you have installed that may be running a lot of data?
To ensure applications are not consistently running in the background do the following press the menu button at the bottom of your phone twice. All the open apps will then appear. Select and hold the bottom of the screen. A minus sign will then appear in the top left of each app. Select each minus sign to close out the application.
I hope the information given will help clarify what is using a lot of data on your phone. Should you have further questions or concerns, please feel free to reach out to us.
Thank You,
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Could someone please direct me what to mark or what to unmark to stop receiving email notifications?

Similar Messages

Maybe you are looking for