Could someone please help me import my iphoto photos into aperture? They are now just referenced files.
Hello,
I am a longtime iphoto user and installed aperture this past december. At that time I imported all my iphoto photos as referenced files and kept them in their iphoto location. Since that time, every photo I took was uploaded directly into aperture and stored there. I am now comfortable enough with aperture that I would like to use it as my primary photo viewer / manipulator and would like to merge my two libraries into one single aperture library. Unfortunately, I cannot figure out how to do this.
I tried consolidating all originals yesterday, however this did not seem to have any effect. I then tried reimporting my iphoto library, however, this simply duplicated many of my events (and the duplicated ones were not even adjustable via aperture, and each photo had a little exclamation point in the lower right corner). Both of these attempts did nothing to combine my aperture projects and my iphoto events (which are now seen as a seperate iphoto tab under projects). I am aware that I can now switch to my iphoto library within aperture in version 3.3, but I just want everything stored in one place and in my aperture library. Can someone please help me with this?
The only thing I can think of is deleting all of the iphoto events from aperture and then reimporting them, but I am scared I will either delete something permenantly or that they will simply reimport as referenced files and remain within iphoto.
Please help!
Thanks,
- Mike
Mike,
I am not quite clear about the current state of your iPhoto and Aperture libraries. It looks like you have plenty of broken links to referenced masters in either library. Whatever you do now, it is very important to ensure that you have a working backup, both of your iPhoto Library and your Aperture library, before you try a major reconstruction.
I tried consolidating all originals yesterday, however this did not seem to have any effect.
In what way did it not have any effect? From the effects you are describing, it looks like all your original master images have been removed from the iPhoto Library and are now inside the Aperture library as managed masters - at least, this would explain, why trying to import the iPhoto library resulted in duplicated projects (and the duplicated ones were not even adjustable via aperture, and each photo had a little exclamation point in the lower right corner). You removed the original masters from the iPhoto library, and now you could not import it, since the originals are now in Aperture.
For me it looks, like you simply need to delete the iPhoto images marked with an exclamation mark, for these are already bound to images that you imported earlier. It is perfectly o.k. that the recently imported iPhoto Library appears in a separate section of the projects in your Library Inspector Panel. Each iPhoto event should appear as a project. Aperture will put them there, so you can find them easily.
You should check now, if the originally imported images, that you imported as referenced, are now managed. If you enable badge overlays you should see no longer any arrows on the thumbnails of your earlier imports. Also, if you select one of these images, you should be able to toggle between original master and version by typing the "M" key.
Define some smart albums (File > New > Smart album) based on the file status: Add a rule: File status is.
One smart album: File Status is referenced
One smart album: File Status is managed
One smart album: File Status is missing
The first album should be empty.
The second album should show all your images you originally imported from iphoto as managed, and that you recently consolidated.
The third album should show your recent import - the images imported from iPhoto after you consolidated the originals to Aperture and removed these images from iPhoto.
Post back, when you have checked the file status of your images in Aperture and we can be sure were the images are exactly.
Regards
Léonie
Similar Messages
-
We have two types of Ipods. A nano generation 5 & a nano touch, and we are unable to download music to them was told its because we have an Acer Android tablet. Could someone please help us in solving this issuses cause we just bought these ipods and was not aware that and all we have is this tablet. .. Please help us
Templeton Peck, the Android tablet does not support iTunes
Angs78, you purchase music from iTunes on the iPod touch. I know of no way to get music on the Nanao from the tablet. -
Quicktime movie trailers still not playing, could someone please help me?
I have not been able to watch any movie trailers from quicktime for two years now and this is really getting old.
my inf!
computer: DELL
system: Windows XP SP2
QT player version: 7.2
I have all system requirments and updates also allready unselected derctX and selected safe mode, still all I get when loading the movie trailer from QT websight is the white box with QT logo in middle, sometime the logo will also have ?mark over it. I figured it was just taking its own sweet time loading so I wated it out. 4 hours later there was still no change. you'd think apple would have fixed or resolved this problem since it has been ongoing for last two or more years.
Could someone please help me?????????
Message was edited by: scarpredelderTry https://discussions.apple.com/thread/4890398?start=0&tstart=0
See if that helps
Allan -
Could someone please help me with contact form php.
Hi,
could someone please help me wright the php for this contact form?
<form class="contact_form" action="kontakt.php" method="post">
<p><input type="text" required="required" id="contact_name" name="contact_name" class="text_input" value="" size="22" />
<label for="contact_name">Namn *</label></p>
<p><input type="text" required="required" id="contact_company" name="contact_company" class="text_input" value="" size="22" />
<label for="contact_company">Företag *</label></p>
<p><input type="email" required="required" id="contact_email" name="contact_email" class="text_input" value="" size="22" />
<label for="contact_email">Epost *</label></p>
<p><textarea required="required" name="contact_content" class="textarea" cols="30" rows="5"></textarea></p>
<p><button type="submit" class="button white"><span>Skicka</span></button></p>
<input type="hidden" value="[email protected]" name="contact_to"/>
</form>
Its no sence writing down my php as it is useless.
All help is appriciated.
Thank youPlease don't post duplicate threads. Continue the discussion in http://forums.adobe.com/thread/1080721.
This thread is now locked. -
Hi there, could someone please help me, i didnt have my icloud on before my iphone 4s broke. I have always used iTunes and everything was backed up on there and now im finding it hard to restore my phone with contacts, photos etc.
Dear Tylerkeefe,
Good morning. Getting notifications that you are close to exceeding your allowance can certainly be alarming. It would be my pleasure to help put your mind at ease.
I understand you are not streaming movies, music, etc. Which these features will use a lot of data. Are you using the Mobile Hotspot on your phone. This may also cause you to exceed your data allowance quickly if you do not power if off after you are done using the feature. To turn off mobile hostpot tap settings>general>personal hotspot>off. Do you have any third party applications that you have installed that may be running a lot of data?
To ensure applications are not consistently running in the background do the following press the menu button at the bottom of your phone twice. All the open apps will then appear. Select and hold the bottom of the screen. A minus sign will then appear in the top left of each app. Select each minus sign to close out the application.
I hope the information given will help clarify what is using a lot of data on your phone. Should you have further questions or concerns, please feel free to reach out to us.
Thank You,
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT -
hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information
Try a search with Google.
Why should we do your homework for you? -
My iPhone 4s refuses to play sound when the headphones are not in. When the headphones are in however, it works perfectly fine! This is most annoying, could someone please help me I have not dropped it and it has not been in any contact with liquid.
I just tried both of those things and to no avail. Here are some pictures if that will help
-
Could someone please help me, I bought my daughter an iphone 4s for her birthday yesterday and I set it up for her so she could use it straight away, now we share emails, facetime and when i download an app she gets it too, very annoying for us both.
you can use the same apple id for purchasing apps and music if you want, but turn off automatic downloads. it may be better to have separate ones, but if you want the same app you'd have to pay twice. that's something you'll have to think about. for all the other stuff like facetime and messages and icloud you need to have separate icloud id's. see the apple link below.
http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US -
Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??
computerilliterate52 wrote:
hi all, i hope someone is very computer litterate about java that is i have a dell 2400 pc windows xp 2, well since msn isnt downloading anymore java updates we all have to download a compatible one to our computer i use explorer and i can play www.iwin.com online games, yet when i go on to the msn browswer it wont load the games all i see is it just trying to load and load nothing said and nothing done. what could be wrong it works on ie and not msn browser? i have zone alarm, i have avg spyware tester and spyblaster, but i thought it may of kept me from downloading all this yet it worked on IE please help and i dont have flash player either it wont seem to work any and i mean any help is welcome.i tried to change the browser settings and did all that stuff i am on broadband DSL and they dont seem to know they say that isnt there job its msn's so i asked them and they said no it is quest broadband since i am with them i just get the run around i have IE 6.0 ihave java plug in 1.4.2. o3 yet it says not verified, i have java 1.6.o o1 i have java plugin 1.6.0 01 i have that twice ? dont know why. and java envirinmemet i have the right stuff cuz like i said it plays or works on explorer not msn browserer bar. i see no picture's in center of the page as it tries to load it is a blank page any help thank you i have been trying going on 3 weeks now thanksI agree with the other posters; try Firefox. It sounds like a bit of a mess and what you may need is an onsite PC tech to do some maintenance on your PC.
Also, learning to properly use punctuation (particularly periods) might not be a bad idea. As it is, your post was very hard to read.
Good luck! -
New user here. Trying to import iPhoto 9.4.2 libraries into Aperture 3.4.3 as referenced files. When accessing File>Import>Library, it finds the iPhoto library just fine, but then imports it as Master files. No option that I can find to leave the photos in place on the file system. All the literature says their should be an option to choose, but I never get that option. What?
All the literature says their should be an option to choose, but I never get that option.
That has been true for the previous Aperture versions. Now Aperture simply treats the original image files exactly as they are in the imported library. Referenced images will stay referenced, managed will be imported as managed. But you can always relocate the imported managed images afterwards by using "File > Relocate".
Regards
Léonie -
Could someone please help me with getting the sabnzbd daemon to start?
Hi everyone,
I'm a classic newbie. I managed to follow some instructions I found on the web to get sabnzbd to install (via Yaourt), and when I invoke it from the command line, it works fine.
I've read that you can get it to start as a daemon, which would be really good. Could someone please explain how this should be done?
Where do I need to put the sabnzbd.init file?
What about the sabnzbd.confd file?
I'm okay enough with adding sabnzbd to the /etc/rc.conf file, but I can't quite configure it so that the necessary files are in place to start it.
If you need any details of my setup, please let me know.
Thanks heaps,
Lukebirdie101 wrote:Where would I find a good place to describe how to install programs using PKGBUILDs? and what that process is actually doing?
Apart from the wiki article on ABS, always look at the pkgbuild when in doubt. This is also helpful when you want to know what compile arguments are passed to GCC. Custom postinstall commands are run through .install file (example what is displayed after installation), this is generally foo.install in the AUR for a pkg named foo. And most importantly, familiarize yourself with compiling process, and Arch specific routines like a daemon should be defined in /etc/rc.d/, instead of /etc/init.d/ in other linuxes.
Edit: A best exercise would be to create a pkgbuild yourself. Arch always recommends community contributions.
Last edited by shemz (2010-09-24 08:08:14) -
Please help as it is starting to look like I have wasted money
I bought an iPod touch 2nd generation and it won't let me download anything as it no been updated I know I cannot get the recent update but how do I get an old one ? , also it is not showing up in iTunes or my computer so I cannot put songs on can someone please help ??The 2G can only go as high as iOS 4.2.1. To find apps for the 2G
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.
To update to 4.2.1
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. -
Could someone please help me . . .
Hello,
Could someone please tell me how to go about writing a java program that would be able to process a statement/sentence. How can I make it is so that when someone types in a statement/sentence and presses enter, the program calculates the total number of words in the statement and whether it ends with a period, question mark, or an exclamation. Could anyone start it off for me so I'd be able to see how it works. My textbook doesn't contain any samples that pertain to this. Just in case you have no idea what I'm talking about, here's what my handout says . . .
Write a Java program to process a statement. You may assume that the statement contains a series of words each separated by exactly one blank space and ending with exactly one punctuation symbol which is either a �period � for a sentence�, �question mark � for a question� or �exclamation point � for an exclamation.� You may assume that the statement fits on one line, it does not wrap over more than one line. You may also assume that no other punctuation symbol is used other than the ending character of the statement.
The program should output:
1. The type of statement processed (sentence, question or exclamation).
2. The total number of words in the statement.
3. The longest word in the statement � if multiple words are of the same longest length � output
the first of those words found in the statement.
4. The shortest word in the statement � if multiple words are of the same shortest length � output
the first of those words found in the statement.
5. The number of short words found in the statement (containing 1-3 characters).
6. The number of medium words found in the statement (containing 4-6 characters).
7. The number of long words found in the statement (containing 7 or more characters).
Again, if someone would be kind enough to start it off for me or give me an example on how to go about doing it, I would greatly appreciate it !!!!!
Thanks for your time,
Ana : )public class Austin
public static void main(String [] args)
try {
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String str = "";
while (str != null) {
System.out.print("> ");
str = in.readLine();
StringTokenizer st = new StringTokenizer(str, " ");
/* analyze your tokens here */
} catch (IOException e) {
} -
recently i downloaded I.O.S 7 and a few days later it says Activation Error.... This device is not register as part of the iphone developer program. If you are a member of the iphone developer program, please register your device in the iphone developer program portal at developer.apple.com/iphone
im trying to restore my phone but i cant without the newest version of itunes.... and i cannot download the newest version of itunes cause when i try it says error 87....
someone please help me would be greatly appreicatedHi there exiledsoul,
You may find the troubleshooting steps in the article below helpful.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W. -
Importing my iPhoto library into Aperture. Best way to avoid duplicates?
Hi,
I'm a new Mac user. I have been in the very slow and tedious process of transferring my photos from my HP hard drive to my Mac. I used iPhoto for a very brief time before purchasing Aperture 3. (I've used photoshop for years.) I haven't yet Imported or consolidated or whatever the correct term would be the iPhoto library into the Aperture library. I've been avoiding it because I know there are some duplicates. Mainly just a few "Events" from the last few weeks before starting using Aperture. Now with the new update, it seems like it's a great time to get it all consolidated into an Aperture library that I can use in both iPhoto and Aperture. What's the easiest way for me to proceed? I'm sorry for my lack of proper Mac terms....I'm learning!
Thanks so much for your help!
ChristyClear as mud??
If you want to see all your images - those now in your Aperture Library and those in your iPhoto Library- then you need to merge both Libraries into one Library - I'd import your iPhoto Library into the Aperture Library.
This combined Library will be compatible with both Applications.
To merge your iPhoto Library into the Aperture Library do the following:
Make a backup of your current iPhoto library (libraries)
Upgrade to iPhoto 9.3, if you have not already done so.
Open your iPhoto Library at least once in Photo 9.3 to upgrade the Library.
Unhide all hidden images. You cannot unhide them when viewing the Library in Aperture.
Quit iPhoto.
If you have not already upgraded to Aperture 3.3, do it like this:
Backup your current Aperture library.
Rebuild the Aperture Database using the Aperture Library First Aid Tools: Launch Aperture with the cmd-options-key combination (⌘⌥) firmly held down, then select "Rebuild Database".
After rebuilding upgrade to Aperture 3.3 and launch Aperture to upgrade the Aperture Library.
With Aperture still open, double click your iPhoto Library. Aperture will prompt you, if you want to add or merge your iPhoto Library - choose "Merge". This will avoid importing duplicate images, as far as Aperture can tell that those are the same images - same filename.
You will have to weed out some duplicates yourself - this is best be done by sorting the images by capture date, then duplicate shots will appear side by side.
Post back, if you have more questions.
Regards
Léonie
Maybe you are looking for
-
Oracle and PHP - insert special characters problem
I have computer with these software: Fedora Core 4 Apache 2.0.54 PHP 5.0.4 Oracle 10.2.0 Firefox (character set: UTF8) System environment: [oracle@computer /] echo $ORACLE_HOME /db/u01/app/oracle/product/10.2.0/db_1 [oracle@computer /] echo $NLS_LANG
-
Mac Three Beeps after install RAM. Again.
Greetings Introduction I've seen all discussions on the topic and still decided to create new one in order to collect information. I've joined the club. Now I also have Macbook Pro, which freezes and beeps three times from time to time. I often atten
-
I just updates Apeture to version 3.3.2 after installing Mountain Lion. There are some photos in Apeture that now say, "Umsupported Image Format". Are these lost? Can I retrieve them...how? Can I change the format so that I can see them again? H
-
Roadmap steps are not visible after patching
Hi , After upgrading or patching ,roadmap steps are not visible in my application. i have used several road maps in my application? what is the reason for this? Regards, Lakshmi.
-
I am using the exact same fla and as in Flash 6, CC, and CC 2014 to run an Away3D-based program. It works without a hitch in 6 and CC. But in CC 2014, all of my embedded resources get the error: 1120 Access of undefined property. Any insight is great