Could someone uncompress a file for me?

I need the firmware update for version 1.1 for a wrt54g wireless router. Could someone uncompress it for me and email to it me if the file isn't too large. Say under 10mg. I will post my email if someone can do that. I have Stuffit and apparently that won't work. Thanks for your help

Why dont you download winzip, or winrar, or any other compress/uncompress software and extract firmware. It would save much time.

Similar Messages

Add option for lossless uncompressed RAW files for A7r

I'd like to see the option for lossless, uncompressed RAW files for those of us who want it vs. the current situation of only having the option of lossy compressed RAW files (which in some instances, can exhibit posterization). I think this is a logical option for a camera of the A7r's calibre. If this option can be incorporated via firmware update, all the better. If it's a hardware issue, hopefully this is addressed in the next iteration of the camera.

Honestly, this is pretty deceitful marketting on both the Sony A7 and A7R literature. both promote the use of 14 bit RAW encoding as a feature of the two sony cameras, however, they are really 11 bit + 7 bit compressed lossly RAW formats, delivering no where close to the same tonality of 14 bit true RAW. in no sony literature that i could find, is it mentioned that it's lossly. this is accurate? Not even close. 14-bit RAW output for rich tonal gradation 14-bit RAW image data of extremely high quality is outputted by the a7. This data fully preserves the rich detail generated by the image sensor during the 14-bit A/D conversion process. When developed with Sony's Image Data Converter RAW development software, these images deliver the superb photographic expression and rich gradation that only 14-bit data can offer. I was going to purchase two A7R bodies and move my canon gear over to Sony ..until really all this came out. I'm hoping as well as the OP that a firmware upgrade comes out.

BEA-141230 Could Not locate descriptor file for System Resource: DS name

Guys,
When I start the Admin and Managed server ..I get below warning message.
*<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>*
I know that weblogic server is unable to locatie datasource1.xml file at <SOA_HOME>/user_projects/domains/base_domain/config/jdbc
Is there any way to to get rid off from this error? I tried to delete datasource from weblogic Admin console, but get below error:
java.lang.NullPointerException
All changes have been activated. No restarts are necessary.
Errors were encountered while performing this delete operation.
Thanks,
Ab

Are you starting servers with the root user? make sure that using whichever user you are starting server, it has full access on MW_Home and it's sub-directories. You may consider raising a support SR.
Regards,
Anuj

Could not open Transport File for creation

I Changed the path and copied the repository from old path to new path. While executing se38 à RSCMST TCode, we get the errors in RED(HTTP interface using fuction group).
1.The error log check_subrc: subrc     1 instead          0
check_subrc: Component : data error text : No such file or directory
docGet: DOC_0                                    error
docGet: DOC_S
check_subrc: subrc     1 instead          0
check_subrc: Component : sdata1.txt error text : No such file or directory
docGet: DOC_S                                    error
docGet: DOC_M
check_subrc: subrc     1 instead          0
check_subrc: Component : mabc error text : No such file or directory
docGet: DOC_M                                    error
docGet: DOC_L
check_subrc: subrc     1 instead          0
check_subrc: Component : ldata error text : No such file or directory
docGet: DOC_L                                    error
docGet: DOC_N
check_subrc: subrc     1 instead          0
check_subrc: Component : Data6 error text : No such file or directory
docGet: DOC_N                                    error
HTTP error: 404 (Not Found) "G:CS_REPZHR_MASTEK046cDF6258C5DF68EAF183C4001F295A507C directory not found"
info: mCreate DOC_0                              error
2.Message 704: (SAPKPROTP Error: Could not open Transport File for creation.
Thanks & Regards
Jituda

Hi,
Could you plz let me know how did you fix this issue?
BR,
Shyam

Gmail could not scan zip file for viruses

I received a zip file. MacBook Pro tries to scan for virus and I received a msg that "Gmail could not scan this file for viruses". Does the problem lies with the zip file OR there is some software that I need to download & install before I could download the zip file?

You are wasting your time scanning for viruses.
I have been using Macs since 1984.
I've worked at companies with 50+ Macs.
I've used every Mac OS From 1.1 to 10.6.7
I have never seen a Mac virus or known anyone that has.

Could someone confirm this behavior for me

OK not sure if I've found a bug or if I just need to get some sleep but could someone try the following and report back:
*Note nothing here should harm your library but if you're squeamish you might want to do this on a test library*
1. Go into Browser view, select one of the library smart albums, doesn't matter which one.
2. Click the magnifying icon to open the smart settings window.
3. Leaving the smart settings window open, select the Photos icon. All your images should be displayed. The top of the smart settings window should read *Smart Settings: Photos*
4. Which ever check box is selected (most likely its the ratings checkbox) deselect it. The browser window should go blank. Click the x to close the smart settings window.
5. Now, try to get images back. The search box and filter window attached to the viewer will not bring back the images. Select Projects or anything else and images are displayed just none in the Photos window.
6. To restore the viewer, select one of the library smart albums, click its smart settings open icon, with the smarts settings window open select the Photos icon. Select the Rating check box, set the ratting to *is greater than of equal to* and set the value to x. All your photos will reappear.
7. Close the *Smart Settings* window, everything is back to normal.
The bug here is that the Photos 'album' shouldn't be able to have a *Smart Settings* filter attached to it. The window that opens if you click the search icon at the top of the browser window is a filter. Of course *Smart Settings* windows should only attach to smart albums. Photos isn't a smart album. It's not even an Album (except internally to Aperture).
If you try this please report back, thanks.

Thanks Kirby,
Yeah I managed to do this to myself last night, which is how I ran across it. It was a real pain, I knew my images weren't gone but for a brief second .....
Anyway I wonder how many reports of libraries disappearing are a result of this? Did you do a report to Apple when you ran across this? I'll send one in today.
regards

Could someone convert this VI for me please?

I downloaded a VI from the message board that might be able to help me with a problem I am having. Trouble is it is written in 7.1 and I have 7.0. Could someone please please please convert it for me?
Attachments:
filter_error_due_to_dt.vi ‏69 KB

Here it is...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
filter_error_due_to_dt[1].zip ‏18 KB

Converting uncompressed AVI files for FCP?

I recently had 30 reels of old 8mm film footage from the 50's and 60's converted to digital and I now have a hard drive with all of the footage converted to uncompressed AVI files. These are extremley large files as one 2 minute and 38 second clip is 4.45 gigs.
I want to bring them into Final Cut Pro to edit them but retain as much quality and picture as I can. I am going to use Mpeg Streamclip to convert the AVI files to quicktime Mov. files but what compression setting and frame size should I use when converting them to Mov. files for best results? As far as frame size, should I use 648 X 486 4:3 aspect ratio or 720 X 486 unscaled?
Thanks in advance for any advice.

Given the material, standard ProRes or even ProRes LT (if you have FCP v7) is fine.
ProRes HQ is intended for 35mm film out and/or 2k video. It is a waste of file space and processing overhead for your purposes.
x

Could someone please check this for

Hi there!
I need someone to do this quick check, so I don't have to install Vista in vain.
I mainly use MIDI interface for compositions and playback. So, could anyone please find a MIDI file with some FASTER parts, play it, and check if there are any dropouts or note misplacements?
It was the issue in all previous driver versions, so please, somebody check this for me will ya?
I have X-Fi Extreme Music.
Thanks

Here is the link to 2 faster midi files... If you have Windows Vista, X-fi and new drivers, please listen to them and tell me do they sound good or bad. Are there any dropouts, or any other issues?
http://www.box.net/shared/2vxsohpagv
Thanks.

Could someone clone this button for me

So that i can see how it is done, i have spent a LOT of time trying to get my buttons text to look at good as this, I have tried a lot of settings but still can't get it, if you do clone it could you upload the PSD, i would clone something for someone if i was able too, so thanks for you help if you do.
http://i32.tinypic.com/2dj1i86.gif

well, that's a matter of choosing the right font, there are plenty of free font sites out there, try this http://new.myfonts.com/WhatTheFont/ maybe it can tell you what font was used. You might want to head over to the Typography forum and see if they can help you find a similar font. Another option would be (and i'm sure that i'll get blasted for this one:P) to use a normal looking font and then use the Character panel to increase the font's Vertical Scale
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-75ada.html
http://help.adobe.com/en_US/Photoshop/11.0/WSE8D8332B-6D87-4a0d-80D4-468E0D836C0C.html

Can't upload Web Job: Could not upload zip file for job:

A few days ago, out of the blue my Web Jobs I had associated with one of my Azure Websites disappeared. Actually at the root of the dashboard in the Portal there were still listed as a Job collection BUT not associated with the website. There were also errors
in the Job logs but I foolishly deleted the Jobs and tried to upload them again. However I keep getting an error when attempting to upload the zip file [as I had previously done] against this same website. I've tried against another website and it worked ok.
But I need to upload against this ONE particular site as the webjobs get files from that website. I did discovered lots of nasty trace in the kudu log file. Here is some:
I've searched and search forums and discussions but can't proceed. Can anyone assist me?
<Events><Event><System><Provider Name="ASP.NET 4.0.30319.0"/><EventID>1309</EventID><Level>2</Level><Task>0</Task><Keywords>Keywords</Keywords><TimeCreated SystemTime="2015-03-14T16:17:48Z"/><EventRecordID>-1680563781</EventRecordID><Channel>Application</Channel><Computer>RD000D3AD0013E</Computer><Security/></System><EventData><Data>3005</Data><Data>An
unhandled exception has occurred.</Data><Data>3/14/2015 4:17:47 PM</Data><Data>3/14/2015 4:17:47 PM</Data><Data>63d127c928c44f0084bdb2a93fc5ab81</Data><Data>1</Data><Data>1</Data><Data>0</Data><Data>/LM/W3SVC/1897069090/ROOT-4705-130708234647101317</Data><Data>Full</Data><Data>/</Data><Data>D:\Program
Files (x86)\SiteExtensions\Kudu\43.40212.1385\</Data><Data>RD000D3AD0013E</Data><Data></Data><Data>6368</Data><Data>w3wp.exe</Data><Data>IIS APPPOOL\payskool-schooladmin</Data><Data>InvalidOperationException</Data><Data>The
pre-application start initialization method Run on type WebActivator.ActivationManager threw an exception with the following error message: Exception has been thrown by the target of an invocation..
   at System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures)
   at System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods)
   at System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded)
   at System.Web.Compilation.BuildManager.ExecutePreAppStart()
   at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException)
Exception has been thrown by the target of an invocation.
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.Reflection.MethodBase.Invoke(Object obj, Object[] parameters)
   at WebActivator.BaseActivationMethodAttribute.InvokeMethod()
   at WebActivator.ActivationManager.RunActivationMethods[T]()
   at WebActivator.ActivationManager.RunPreStartMethods()
   at WebActivator.ActivationManager.Run()
Could not load file or assembly 'Newtonsoft.Json, Version=4.5.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
   at Microsoft.AspNet.SignalR.DefaultDependencyResolver.RegisterDefaultServices()
   at Microsoft.AspNet.SignalR.DefaultDependencyResolver..ctor()
   at Kudu.Services.Web.App_Start.NinjectServices.SignalRNinjectDependencyResolver..ctor(IKernel kernel)
   at Kudu.Services.Web.App_Start.NinjectServices.RegisterServices(IKernel kernel)
   at Kudu.Services.Web.App_Start.NinjectServices.CreateKernel()
   at Ninject.Web.Common.Bootstrapper.Initialize(Func`1 createKernelCallback)
   at Kudu.Services.Web.App_Start.NinjectServices.Start()

Thanks very much for your prompt reply. This has indeed fixed the issue.
Can I ask what might have caused the issue in the first place to necessitate the restart? Is it possibly there were too many logs files and that perhaps disk space became an issue for the Website?
Kind regards,

Javah error: could not find class file for 'com.ntv.ndkjni'

Hi,
My project directory : C:\ndkJNI
My java file directory : C:\ndkJNI\src\com\ntv\ndkjni
My package name    : com.ntv.ndkjni
1 ) I entry command prompt at C:\ndkJNI\src\com\ntv\ndkjni
2 ) Javac test.java and create test.class succesfully. test.class is in C:\ndkJNI\src\com\ntv\ndkjni folder.
3 ) Later I used Javah, try below javah variously
     a) javah -classpath C:\ndkJNI\src\com\ntv\ndkjni test
     b) javah -classpath C:\ndkJNI\src\com\ntv\ndkjni.test
     x) javah -classpath C:\ndkJNI\src\com\ntv\ndkjni com.ntv.ndkjni.test
     y) javah -classpath C:\ndkJNI\src\com\ntv\ndkjni com.ntv.ndkjni test
     c) javah -classpath C:\ndkJNI\src\com\ntv\ndkjni com.ntv.ndkjni.test
     d) javah com.ntv.ndkjni.test
     e) javah com.ntv.ndkjni test
     f) javah com.ntv.ndkjni test.class-> (error: exception in a thread illegal argument exception)
I am searching for 5 day. I couldnt find solution. I try different computer. I tried ubuntu and win8, the error still with me.
Thats interesting when I delete the package com.ntv.ndkjni; from java file, then create class file again with javac then javah can create header file succesfully.
Please help me.
*****************************test.java**************************
package com.ntv.ndkjni;
public class test {
static
System.loadLibrary("hello");
    public static native int toplama(int sayi1,int sayi2);

javah takes a fully qualified class name so in your case that would be
com.ntv.ndkjni.test
As with all things related to java the class path is used to resolve the class based on the fully qualified name. The name resolves STARTING at the path and then attempts to find the class BELOW the classpath by resolving the name.
Because of that your class path should be the following
C:\ndkJNI\src

How to get .Xap file for windows(8.1) app in visual studio 2013

Hi ,
I am creating an app that supports for windows tablet using visual studio 2013.For windows Phone in bin folder i can see ProjectName.xap file these file can be submitted to store.But I could not see xap file for windows apps in visual stuido.What file
I should use to upload my project to store.
Thanks,
Alok

Additionally, xap extension only for Windows Phone Silverlight also some other Silverlight project.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Download a Project file for Visual Studio regarding the Kinect for Windows v2? Getting Started with Kinect Development in Visual Studio

I am currently trying to make an application for Kinect for Windows v2 but I am entirely new to Visual Studio and Kinect development and could use some help getting started. I honestly have no idea where or how to start and I figured the easiest thing would
be to obtain a simple project file and examine how it works myself, but I have been unable to find one. The easiest thing would be if I could obtain a project file for Visual Studio that is an application which overlays the Skeletal model over people in real
time, though similar project files would also be appreciated. The app I am making largely involves things similar to overlaying the skeletal model on bodies so this would get me off to a great start and show me how the code is laid out within visual studio
simultaneously. (I would prefer the code to be in C# if that is possible but other languages also work).
I have checked out some of the guides for kinect development but they all assume you know how visual studio works so I cannot get very far in them. Thus if you know of a good guide to get me started with visual stuido AND the Kinect then I would be glad
to here that as well.
Alternatively, and I know this is not the right place for this, I have Matlab, which I know works for the Kinect v1 but can't find support for it regarding the v2, so if you could point me in the right direction on how to get it to work with the Kinect v2
THAT would also work incredibly well as I am much more familiar with Matlab.
I already have Visual Studio Ultimate 2013 installed, as well as the Kinect SDKv2.0, the physical Kinect for Windows v2, and my laptop meets all of the requirements for development so those are not issues.
Thanks in advance for any advice you can give me!

Hi Jicnon,
Thank you for posting in MSND forum.
Since this forum is discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. About your issue, I think that it is
more related to the Kinect for Windows v2, so I suggest you can post this issue directly to Kinect for Windows v2 SDK forum:https://social.msdn.microsoft.com/Forums/en-US/home?forum=kinectv2sdk
,maybe you will get better support.
In addition, I find a similar thread about your issue, maybe you will get some useful message.
https://social.msdn.microsoft.com/Forums/en-US/92b23946-53d2-419c-8624-66e6c390617f/information-to-start-project-with-kinect-for-windows-v2?forum=kinectv2sdk
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Could someone uncompress a file for me?

Similar Messages

Maybe you are looking for