Could this work on Nvidia boards as well

?( I found this on a Intel site about loading DDR ram and copied it.
Remove the AGP video card before installing or upgrading memory to avoid interference with the memory retention mechanism.
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.
I don't know if Nvidia supports SPD but it makes sense as the memory control chip maybe picking up some info from the DDR on the video card.
I can't test this myself as I still don't have a working MSI board.

Thanks Wonkanoby you saved me a whole lot of time. I am so desperate to get my dual mem to work that I didn't even think about the mechanical end (mem retension) WAT A BONEHEAD I BE
What sisoft mem scores you getting in dual? I thinking of getting ram that works in dual but not sure if it's worth it.
I'am getting around 3100/93% & 2800 83%
Thanks

Similar Messages

Time Capsule: Storage and Time Machine - Could this work?

Hi everyone,
my Macbook got stolen last Friday and thank God I had an external HD and Time Machine (TC)to keep all my data. Now here's the dilemma.
I bought time capsule (1TG) to use as a back up. I figure I can hide it somewhere in the house and not worried about having it disappeared. My laptop should be here tomorrow, so I want to get it right before do anything.
The present external HD is partitioned in 2: 250 Gb for time machine, and 250Gb for other storage (iMovie projects etc etc.)
Since I cannot partitioned TC, I was wondering if this would work.
When I get my laptop (Macbook - w. 320 Gb HD), I will do my re import for my data (appr.60Gb) from my first HD, then let time machine do its thing with TC. Now here's what I want to do. Take all the "storage" (appr. 200Gb), import it to the Macbook , use time machine to back it up. Then I delete the "storage" from my macbook, so it's not 3/4 full before I even install programs such as Aperture. If this works, that means I would have access to all my storage if I return to day 1 of time machine. Do you think it will work, or is time machine going to dump it after a certain amount of time?
Thanks in advance,
SG

You needn't go to all that trouble if you simple connect your old backup drive to the computer then exclude the TM backup partition from the TC in TM. TM will backup both your computer's drive and the storage partition on your other drive. The storage partition will be backed up separately on the TC from the computer's drive. If you copy that data to your computer's drive then backup entirely to the TC then delete the data from your computer's drive, the backup on your TC will eventually be deleted as well and you'll have no backup of the data on the external drive's storage partition.
A TM backup is not simply a substitute for storage space. Once you delete a file that has been backed up by TM eventually when TM does a weekly or monthly consolidation it will delete the file and all its copies from the backup.

HT4753 Does this work in Microsoft Word as well?

As the title says, curious to know if Versions works in Word as well.

cyber saliva wrote:
As the title says, curious to know if Versions works in Word as well.
No. Apps must be specfically written to do it.
Matt

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

Hi Vivek,
Thanks a lot for replying, actually i am creating a short LAMP animation. In which i used Blur filter on the fire flares(SVG images), everything works just fine on google chrome, but for IE10 & Firefox the filter seems not working, so i need to know is it possible to override the fallbacks for the Blur Filter through external StyleSheet.
IE10 & firefox rendered Image, blur filter not working Google Chrome rendered Image, blur filter working perfectly
So, can you please guide me, what shall i do in maintaining quality of my graphics as well while such animation's.

I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and cannot do this. What can be done to restore my original functionality?

I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and this no longer works. How could I restore the previous functionality? Is somethong wrong?

Hi Eustace.
Thanks for replying to my problem. After posting I noted the "More Like This" box on the right of the screen. The top topic was "Restore old dual screen functionality" and turned out to be the the same question with a surprising answer - in the "Mission Control" dialogue, NOT the "Displays" dialogue. There are five tick boxes at the top of the Mission Control screen and the last of them is "Displays have separate spaces" and this box was ticked through the loading of the Mavericks op. system (presumably). Unticking this box, as advised, restored the 'extended' mode and all is now well.
We live and learn!

TS1398 Very weak WIFI on my new iPad MD511LL. Tried Apple suggestion, but they didn't work. Signal is variable from zero to two - never shows three 'bars' even on stronger wifi system. Could this unit be defective?

Just bought it last week. Have synced it with my main computer. It gets WIFI most of the time, but the signal never goes above two bars (curves) even when I'm in a strong WIFI area. Rest of the time it varies between zero bars (no service) to two bars - slow, slow, slow.
Already did the recommended shutdown and the WIFI on and off suggestions made by Apple. Already compared to other equipment, which receive a solid, strong three bars at all the same locations. Since this is the WIFI only model,quite alarmed at the problem. I need the WIFI to be able to pick up the signals better.
Could this be an antenna problem?? Behaves this way even when not in any case.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please he

Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please help

The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
That is why I am so confused, as it seems to be the home sharing that is the problem!

My apple ID account doesn't work on my itunes but it does on the web. Could this be because I sync my music instead of buy it?

My apple ID account doesn't work on my itunes but it does on the web. Could this be because I sync my music instead of buy it?

No idea what "My apple ID account doesn't work on my itunes but it does on the web" means.
Please explain

I need to change my apple ID because I'm changing my email address. I'm worried that when I do, I'll no longer be able to use my first generation apple tv unless I change the apple ID there as well. Does anyone know how this works??

I have to change my apple ID because I'm changing my email address. (I have a Comcast address and am switching to U-verse) I'm worried that when I do, I'll no longer be able to use my first generation apple tv unless I change the apple ID there as well. I'm also trying to find out if changing my apple ID is going to interfere with getting my itunes content on my computer and my iphone. Does anyone know how this works??

My iTunes appleID is an old defunct e-mail address - it does not have to be functional.
Do what Winston says to ensure you keep getting correspondence related to that ID.
AC

I logged in to fb but could not 'work' anything, changed browser to chrome google and everything worked, why is this?

I could login, could read everything on fb but could not 'work' on fb, could not 'like', not post, not access anything.
My tech suggested changing from firefox to chrome google and everything worked.
Only other problem is that windows has taken over the posts of my photos and I can't see the photos now, just little green box in middle of screen unless I click on the box and it opens up the photo. How do I get my photos back now, as well.
Am going back to firefox once more to see if everything is cleared up.
Any suggestions about getting photos 'released' would be good.
Thank you in advance.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?

I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?

Which model iMac do you have? http://support.apple.com/kb/HT1758 How to identify iMac models
Which OS is currently installed?
Check out KB Articles: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
If not of the above works and you have AC, call them. Let them deal w/it. Otherwise, take your iMac down to your local AS or an AASP. Diagnostic testing is FREE!
You can also research for a solution on YouTube's "How To" website and iFixit.

The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers. How can I fix this?

The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers. How can I fix this?

You can try the standard fixes of reset, restore from backup and restore to factory defaults to rule out a hsoftware proble. Frequently it is to to a problem with the eadphone jack and the solution is to replace the jack.

Just now i replace the 5s mother board but could not work touch id pls help me.....

just now i replace the 5s mother board but could not work touch id pls help me.....

if you have replaced the logic board on your phone, by yourself then that is considered modification and can cause other parts to fail due to ESD issues or just damage from handling parts

After upgrading to snow leopard my charger works intermittently, could this be a software issue or just a coincidence

After upgrading to snow leopard my charger works intermittently, could this be a software issue or just a coincidence

Very likely this is a coincidence. Have you tried resetting your System Management Controller? That would be the best first step for any issue that has to do with power.
Best of luck.

Hi I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do thi

Hi
I am a keen photographer and I have just bought you SD card reader for ipad. This works well but was winding if there is an app that I can view the images on the SD card full screen without having to import them to the iPad or is there a way to do this on the iPad
The reason for buy this was for when I was out and about to get a better view off my images.
I have a iPad 2 16gb
Hope you can help!
Thanks

A couple of weeks ago, (after reading a review in TUAW) I bought a wireless hub/ SD card reader called RAVPower. its app comes with a built in viewer, so you can load it up, and see the pics full screen.

Could this work on Nvidia boards as well

Similar Messages

Maybe you are looking for