Could u pls anwer these?

Hi everybody!
I have some doubts in abap could u pls tellm these asap!
How you support the clients. Could you expalin me prcedure of loging the tockens and how do you intract to clients. Also hom many tockens you get in a day ( on an average).
What is Integration between SD and MM : SD and FICO ? Can any body give me this is ?
How to maintain Transport Request?

Hai!
In Sap we have three types of projects 1.Implementation 2.Upgrading  3.Maintanence.
When ur talking about the supporting to client it means that the Sap is already implemented and the coding part is also done.But when the client wants to change the look of the ouput ie it can be from any part of Abap(report,BDC's scripts and so on).So we need to change the coding according to the requirement of client ie in simple terminology enhancements.
Coming to tickets that depends upon the project if the supporting project is huge it takes time and until u are not up with it you wont be given the other one.I mean when it is fully tested and forwarded to PRD.Well about transport request you have transaction called SE09 create a transport request in DEV and work on it when you feel that the coding part is done in DEV then transport it to QAS for testing.You'll be getting request when u make changes in program.I did'nt understand about your question regarding  Integration between SD and MM or FICO.Hope u got my answer to ur questions.

Similar Messages

  • Could u pls  send these?

    I need a moderate example for interactive report with little bit complexity in logic
    could any body provide me any report or atleast link so that I can able to learn ,As
    Im very fresher to reports Im interested to knew about the reports development but I need
    a little bit hard and includes  runtime selcection screen logics ,real time example ..could u pls....send it tome...

    A simple example that shows two lists
    REPORT  zkb_test.
    DATA: i_t000 TYPE TABLE OF t000,
          i_tcurc TYPE TABLE OF tcurc.
    DATA: w_t000 TYPE t000,
          w_tcurc TYPE tcurc.
    DATA: v_field(80) TYPE c.
    START-OF-SELECTION.
      SELECT * FROM t000 INTO TABLE i_t000.
      SELECT * FROM tcurc INTO TABLE i_tcurc.
      LOOP AT i_t000 INTO w_t000.
        WRITE:/ w_t000-mtext,
                w_t000-ort01,
                w_t000-mwaer HOTSPOT ON.
        HIDE w_t000-mwaer.
      ENDLOOP.
    AT LINE-SELECTION.
      GET CURSOR FIELD v_field.
      CONCATENATE 'You have Clicked:' v_field INTO v_field.
      MESSAGE v_field TYPE 'I'.
      READ TABLE i_tcurc INTO w_tcurc WITH KEY waers = w_t000-mwaer.
      IF sy-subrc EQ 0.
        WRITE:/ w_tcurc-waers,
                w_tcurc-isocd.
      ENDIF.
    Regards
    Kathirvel

  • Could you pls answer this

    What all the thing should be used in order to improve the performance and what all the thing should be avoided ?
    Explain abt control brk statement ?
    Could you pls give me clear explanation for CHECK,EXIT,STOP ?
    In real time, what is the steps which is used for transfer data - BDC
    whether call transaction,session method pls explain it
    And also explain about the include statement used in BDC
    Could you pls answer this

    Hi
    All this AT NEW, AT FIRST, AT END OF and AT LAST are called control break statements of Internal tables and are used to calculate the TOTALS based on sertain key fields in that internal table
    FIrst to use these statements the ITAB has to be sorted by the key fields on whcih you need the SUM of the fields.
    Some time you will get * when moving data from this int table to other table using these commands
    so you have to use
    READ TABLE ITAB INDEX SY-TABIX in AT..ENDAT..if you are using other fields between them
    DATA: sflight_tab TYPE SORTED TABLE OF sflight
                      WITH UNIQUE KEY carrid connid fldate,
          sflight_wa  LIKE LINE OF sflight_tab.
    SELECT *
           FROM sflight
           INTO TABLE sflight_tab.
    sort sflight by carrid connid.
    LOOP AT sflight_tab INTO sflight_wa.
      AT NEW connid.
        WRITE: / sflight_wa-carrid,
                 sflight_wa-connid.
        ULINE.
      ENDAT.
      WRITE: / sflight_wa-fldate,
               sflight_wa-seatsocc.
      AT END OF connid.
        SUM.
        ULINE.
        WRITE: / 'Sum',
                  sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
        SKIP.
      ENDAT.
      AT END OF carrid.
        SUM.
        ULINE.
        WRITE: / 'Carrier Sum',
                  sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
        NEW-PAGE.
      ENDAT.
      AT LAST.
        SUM.
        WRITE: / 'Overall Sum',
                  sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
      ENDAT.
    ENDLOOP.
    BDC
    BDC:
    Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
    Features :
    BDC is an automatic procedure.
    This method is used to transfer large amount of data that is available in electronic medium.
    BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
    BDC uses normal transaction codes to transfer data.
    Types of BDC :
    CLASSICAL BATCH INPUT (Session Method)
    CALL TRANSACTION
    BATCH INPUT METHOD:
    This method is also called as ‘CLASSICAL METHOD’.
    Features:
    Asynchronous processing.
    Synchronous Processing in database update.
    Transfer data for more than one transaction.
    Batch input processing log will be generated.
    During processing, no transaction is started until the previous transaction has been written to the database.
    CALL TRANSACTION METHOD :
    This is another method to transfer data from the legacy system.
    Features:
    Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
    Updating the database can be either synchronous or asynchronous. The program specifies the update type.
    Transfer data for a single transaction.
    Transfers data for a sequence of dialog screens.
    No batch input processing log is generated.
    Differences between Call Transaction and Sessions Method:
    Session method.
    1) synchronous processing.
    2) can tranfer large amount of data.
    3) processing is slower.
    4) error log is created
    5) data is not updated until session is processed.
    6) generally used for back ground jobs.
    7) at atime we can update to more than one screens.
    Call transaction.
    1) asynchronous processing
    2) can transfer small amount of data
    3) processing is faster.
    4) errors need to be handled explicitly
    5) data is updated automatically
    6) for background n fore ground jobs.
    7) at atime we can update to a single screen.
    For BDC:
    http://myweb.dal.ca/hchinni/sap/bdc_home.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
    http://www.sap-img.com/abap/learning-bdc-programming.htm
    http://www.sapdevelopment.co.uk/bdc/bdchome.htm
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
    http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
    Check these link:
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://www.sap-img.com/abap/question-about-bdc-program.htm
    http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
    http://www.planetsap.com/bdc_main_page.htm
    call Transaction or session method ?
    Regards
    anji

  • I want to learn SD , Could you pls send me the Reference Book names.

    Hi All,
    I want to learn SD , Could you pls send me the Reference Book names.
    and i heard about materials like Billing , Pricing , Shipping - Which material should i study first to understand baisc flow.
    Thanks in Advance.
    Regards,
    Nithi.

    Hi ,
    Instaed of a book i will refer you the help files of SAP .
    You can get there files at http://help.sap.com/
    An for SD the link is http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
    These files will help you a lot .
    even today also SD gurus take help from these files only.
    Regards

  • What is the use of profiles in oracle apps,could u pls explain with examples

    what is the use of profiles in oracle apps,could u pls explain with examples

    1b5595eb-fcfc-48cc-90d2-43ba913ea79f wrote:
    what is the use of profiles in oracle apps,could u pls explain with examples
    http://www.appspatrols.com/now/blog/understanding-profile-options-in-oracle-apps-oracle-e-business-suite
    http://www.oracle.com/pls/ebs121/search?word=Profile+Options&format=ranked&remark=quick_search
    Thanks,
    Hussein

  • Could you pls help on  use exits   before  saving  the contract .

    i want to check the limitatin  before  saving the contract  in sap banking.
    for  contract creation  tcode is  FN1V or FNV1.
    Could you pls tell me the   use exits  if knows  anybody
    advance thanks.

    Hi Diva,
    use this exit.
    EXIT_SAPLFVDA_002
    if this is not suitable for u r req then go to SMOD press f4 then click on Information systems give FVVD in package then press enter.there u will get no of enhancement. search for u r rlant.
    Thanks

  • I can't see + - up down icons for repeating region. Could someone pls help?

    I can't see + - up down icons for repeating region. Could someone pls help?

    Please elaborate like what sort of repeating region, which version of Dreamweaver. Perhaps an image that will help us to understand the question.

  • HT1212 i have forget the passcode of my iphone could u pls help me thanks

    i have forget the password of my iphone could u pls help me thanks.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • HT3775 hello mate,could you pls tell me how can i play a downloaded movie

    hello mate,could you pls tell me how can i play a downloaded movie

    Note, if the downloaded movie is from something illegal, we won't be able to tell you.
    If it is from something legal, what source is it?
    Do you have an Intel or a PowerPC Mac?

  • Could you pls explain the "Get-Acl C:/Windows | fl" output?

    Could you pls explain the "Get-Acl C:/Windows | fl" output? There are some nos. what are those indicate?
    PS C:\> Get-Acl C:/Windows | fl
    Path : Microsoft.PowerShell.Core\FileSystem::C:\Windows
    Owner : NT SERVICE\TrustedInstaller
    Group : NT SERVICE\TrustedInstaller
    Access : CREATOR OWNER Allow 268435456
    NT AUTHORITY\SYSTEM Allow 268435456
    NT AUTHORITY\SYSTEM Allow Modify, Synchronize
    BUILTIN\Administrators Allow 268435456
    BUILTIN\Administrators Allow Modify, Synchronize
    BUILTIN\Users Allow -1610612736
    BUILTIN\Users Allow ReadAndExecute, Synchronize
    NT SERVICE\TrustedInstaller Allow 268435456
    NT SERVICE\TrustedInstaller Allow FullControl
    Audit :
    Sddl : O:S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464G:S-1-5-80-956008885-3418522649-1831038044-185
    3292631-2271478464D:PAI(A;OICIIO;GA;;;CO)(A;OICIIO;GA;;;SY)(A;;0x1301bf;;;SY)(A;OICIIO;GA;;;BA)(A;;0x1301bf;;;
    BA)(A;OICIIO;GXGR;;;BU)(A;;0x1200a9;;;BU)(A;CIIO;GA;;;S-1-5-80-956008885-3418522649-1831038044-1853292631-2271
    478464)(A;;FA;;;S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464)
    AliahMurfy

    Those numbers are
    generic access rights.
    The string representation of the access rights come from the FileSystemRights enumeration. Generic rights aren't included in that enumeration, so they show up as the numeric value. You can look up the generic mappings for lots of different objects on MSDN.
    The 3.0 beta of
    my access control module will translate generic access rights for lots of different objects, including files and folders. Here is a screenshot showing the generic rights being translated for a registry key (HKLM:\SOFTWARE) and a folder (C:\Windows):
    The helper function that does the translation is temporarily accessible in the beta version. It is called New-AdaptedAcl. You can play around with it to get a better idea of what's going on (but this command will be private before the final 3.0 version is
    released). Here's a screenshot of the helper function in action (the first command does no translation, it just gives a string representation of the numeric access mask; the second command does translation, but it doesn't merge similar ACEs with each other):

  • Pls answere these questions

    hi bwers,
    can u pls an these questions:
    1. wat is inversion field or inversion routine.?
    2.wat is sourcing matrix?
    3.wat is abnormal load processing (blackout from ods level)?
    4.how we can authorize single report at hierarchy level?
    5.in copa datsouce starts from 1_c0_pa... , then if this the datasource then where we load this datsource in which cube?
    6.wat is it mean table is cross client?
    7. wat are process keys?
    8.wat is this output device printer like LP01?
    i know thx=points
    rubane

    Please read SCN's rules of engagement before posting in this forum

  • HT1414 Hello, I tried to to update my ipone 3s but it says it can not be activated. could you pls help

    I tried to upgrade my iphone 3s ios from 4 to 6 so that i can download some things on it. through the process it tells me that my iphone could not be activated. now I have no service or phone could u pls help?

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • Could you pls give the details about the Unicode conversion during Upgrade

    Hi,
    Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
    Waiting for quick response
    Best Regards,
    Padhy

    Hi,
    These are the few points i gathered during my upgradation project.
    Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
    So it is advised to keep a back-up of the existing system.
    Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
    Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
    Version Upgrade involves the following Steps.
    Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
    • First copy the entire E4B system into the E1B System which is created for Version 4.7.
    • Apply the Version 4.7 CD provided by SAP over the E1B System.
    • Now check whether all the functionalities that was in E4B system works fine with E1B system also.
    Thus the Version Upgrade involves two steps.
    1. SAP Upgradation with the help of the CD
    2. Manual Upgradation.
    1. SAP Upgradation with the help of the CD
    This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
    2. Manual Upgradation.
    This Manual Upgradation involves
    2.1 Upgradation of Standard Objects
    2.1.1 SPAU Objects
    2.1.2 SPDD Objects
    2.2 Upgradation of Custom Objects.
    Upgradation of Custom Objects can be placed under the following three categories.
    Unicode Compliance
    Retrofit
    Upgrade
    Please Find below some of the common Unicode Errors and their solutions
    1. Error:
    In case of Translate Error; ‘Dangerous use of Translate in Multilingual system.’
    Correction:
    To correct the Error occurring on TRANSLATE statement – use this additional statement before the Translate statement.
    SET LOCALE LANGUAGE sy-langu.
    This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is “sy-langu”, i.e. the log on language of the user.
    2. Error:
    In case of Open Dataset Error; ‘Encoding Addition must be included.’
    Correction:
    This Error occurs only when the MODE is TEXT.
    To correct the Error occurring on OPEN DATASET statement – use this statement instead.
    OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
    Where: dataset_name – NAME OF THE DATASET.
    Access – INPUT or OUTPUT or APPENDING or UPDATE.
    DEFAULT - Corresponds to UTF-8 in UNICODE systems &
    NON_UNICODE in NON-UNICODE systems.
    3. Error:
    In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; ‘Function module UPLOAD is flagged as obsolete.’
    Correction:
    The FM GUI_DOWNLOAD/UPLOAD is used.
    The variations to be made in the parameters of the FM:
    1. Filename – It must be of STRING type.
    2. Filetype – “DAT” is not used any longer, instead “ASC” is used.
    3. Field Separator – The default value “SPACE” is used, incase for a TAB separated file “X” can be used.
    4. Error:
    In case of CURRENCY/UNIT Addition Error; ‘Use addition CURRENCY/UNIT when outputting.’
    Correction:
    The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
    To correct this error follow the following method:
    WRITE: /3 'TOTAL',' ', TOTAL.
    WRITE: /3 ‘TOTAL’,’ ‘, TOTAL CURRENCY ‘2’. --- Where ‘2’is the Currency Key for Getting 2 decimal places.
    5. Error:
    In case of TYPE X Error; ‘Variable must be of C, N, D, T or STRING type.’
    Correction:
    We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
    So the method to be followed is:-
    1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
    2. Declare the variable as Type C, and use the method UCCP(‘XXXX’) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute “HORIZONTAL_TAB” of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
    E.g.:
    i) *DATA: TAB TYPE X VALUE 09, “Tab character
    CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
    DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    ii) * DATA: CHAR TYPE X VALUE 160.
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA CHAR TYPE C.
    CHAR = CL_ABAP_CONV_IN_CE=>UCCP(‘00AO’).
    (Here ‘00A0’ is the Hexadecimal equivalent of the decimal 160).
    3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
    E.g.:
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA : LF(2) TYPE X VALUE 'F5CD'.
    DATA : BEGIN OF LF,
    A1 TYPE C,
    A2 TYPE C,
    END OF LF.
    LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
    LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
    6. Error:
    In case of the Character “-“Error; ‘The Character “-“can’t appear in names in Unicode Programs.’
    Correction:
    The Character “-“(Hyphen) appearing in Variable names is replaced by the character “_” (Under Score) for Unicode/Upgrade Compliance.
    E.g.:
    *wk-belnr LIKE bkpf-belnr,
    *wk-xblnr LIKE bkpf-xblnr,
    *wk-date LIKE sy-datum,
    *wk-wrbtr LIKE bseg-wrbtr,
    *wk-name1 LIKE lfa1-name1,
    *wk-voucher(8) TYPE c.
    wk_belnr LIKE bkpf-belnr,
    wk_xblnr LIKE bkpf-xblnr,
    wk_date LIKE sy-datum,
    wk_wrbtr LIKE bseg-wrbtr,
    wk_name1 LIKE lfa1-name1,
    wk_voucher(8) TYPE c.
    7. Error:
    In case of The SUBMIT-TO-SAP-SPOOL Error; ‘you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition. ‘
    Correction:
    1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
    2. Call the FM GET_PRINT_PARAMETERS:
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    3. Use the SUBMIT-TO-SAP-SPOOL statement.
    E.g.:
    •     submit zrppt500
    •     using selection-set 'AUTO3'
    •     with res_no eq lo_rsnum
    •     with sreserv in preserv
    •     to sap-spool destination p_dest
    •     immediately 'X'. "print immediate
    DATA: print_parameters type pri_params,
    archive_parameters type arc_params,
    valid_flag(1) type c.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    Submit zrppt500
    Using selection-set 'AUTO3'
    With res_no eq lo_rsnum
    with sreserv in preserv
    to sap-spool
    SPOOL PARAMETERS PRINT_PARAMETERS
    ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
    WITHOUT SPOOL DYNPRO.
    8. Error:
    In case of Message Error; ‘Number of WITH fields and number of Place Holders are not same ‘.
    Correction:
    Split the statement after WITH into the same number as the place holder for that Message ID.
    E.g.:
    1. * MESSAGE E045.
    MESSAGE E045 WITH '' ''.
    2. in program ZIPI0801
    •     Start of change for ECC6
    •     message e398(00) with 'Could not find access sequence'
    •     'for condition type:'
    •     p_ptype.
    message e398(00) with 'Could not find '
    'access sequence'
    'for condition type:'
    p_ptype.
    •     End of change made for ECC6
    9. Error:
    In case of Move between 2 different Structures; ‘The structures are not mutually convertible in a Unicode program.’
    Correction:
    Make both the Data Types compatible and then assign the contents.
    E.g.:
    The statement –“move retainage_text to temp_text.” Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
    A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
    TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
    TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
    TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
    TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
    TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
    TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
    TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
    10. Error:
    In case of ‘no description found’; ‘add a GUI title’.
    Correction:
    In this type of error gui title is generally missing so add a GUI title to the module pool.
    11. Error:
    In case of ‘writing internal or transparent table’
    Correction:
    Write individual fields.
    E.g.:
    WRITE: / EXT. --> EXT should be a character type field
    WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
    12. Error:
    In case of ‘combination reference table/field S541-UMMENGE does not exist’
    Correction:
    Was due to error in reference table S541. TABLE S541 has errors
    1)”Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)”
    2)”Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)”
    Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
    And that of ZMKCODE (from ZACCODE to ATTR8)
    13. Error:
    In case of ‘KEY does not exist’
    Correction:
    The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
    14. Error:
    Incase of ‘WRITE’ statement, ‘Literals that take more than one line is not permitted in Unicode systems.’
    Correction: To correct this error, we need to align the spaces accordingly so that the statement doesn’t go beyond the line.
    15. Error:
    Incase of Data statement, ‘The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect………..’
    Correction: To correct this error, instead of “like” in the Data statement, use “type”.
    16. Error:
    Incase of DESCRIBE statement, ‘DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.’
    Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
    CHARACTER MODE is added when the data object is of flat/ character type.
    BYTE MODE is added when the data object is a deep structure.
    Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
    LENGTH clen IN CHARACTER MODE.
    Where blen and clen must be of type I.
    17. Error:
    Incase of DO-LOOP Error,’ In Do loop range addition needed‘
    Correction:
    An internal tables is declared and the two fields (VARYING field and NEXT field) were
    Included inside the internal table
    E.g.: In program SAPMZP02
    DO 11 TIMES
    •     VARYING STATION_STATE FROM STATION1 NEXT STATION2. “ECC6
    CASE SYST-INDEX.
    WHEN ‘1’
    STATION_STATE = STATION1.
    WHEN ‘2’
    STATION_STATE = STATION2.
    WHEN ‘3’
    STATION_STATE = STATION3.
    WHEN ‘4’
    STATION_STATE = STATION4.
    WHEN ‘5’
    STATION_STATE = STATION5.
    WHEN ‘6’
    STATION_STATE = STATION6.
    WHEN ‘7’
    STATION_STATE = STATION7.
    WHEN ‘8’
    STATION_STATE = STATION8.
    WHEN ‘9’
    STATION_STATE = STATION9.
    WHEN ‘10’
    STATION_STATE = STATION10.
    WHEN ‘11’
    STATION_STATE = STATION11.
    18. Error:
    Incase of the parameter QUEUE-ID Error,’ QUEUE-ID’ is neither a parameter nor a select option in program rsbdcbtc.’
    Correction:
    The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
    E.g.: In program Z_CARRIER_EDI_INTERFACE
    •     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
    •     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
    Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
    19. Error:
    Incase of EPC Error,’ Field symbol <TOT_FLD> is not assigned to a field ‘.
    Correction:
    This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
    The OS Note - 1036943 needs to be applied.
    Error:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
    Correct:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    Error:
    Constants : c_tab type x value '09' .
    Correct:
    Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
    Error:
    Data : begin of output_options occurs 0 . Include structure ssfcompop.
    Data : end of output_options .
    Correct:
    Data : output_options type standard table of ssfcompop with header line .
    Error:
    PARAMETERS : NAST TYPE NAST .
    Correct:
    PARAMETERS : NAST TYPE NAST NO-DISPLAY .
    Replace WS_DOWNLOAD and WS_UPLOAD by
    GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
    For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
    Issue:
    Moving data from one structure to another structure if those two structures are not compatible
    Solution:
    we should use move-corresponding or field by filed we need to move it.
    If database structures are different in 4.6c and ECC6.0,
    Then we should go with append structure concept.
    While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
    Also Check this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
    Reward points if helpful.
    Regards,
    Ramya

  • COULD YOU PLS HELP ME TO FIX REPEATED OBJECT ISSUE.

    Hello
    We are migrating ND5 application into Iplanet. I am not getting
    any idea to migrate the following ND code into Iplanet.Could
    you please help me to fix problem.If anybody handled with repeated
    objects could you please send migrate code for the following
    ND CODE.
    CSpRepeated repeated =(CSpRepeated) event.getSource();
    CSpStaticText stFieldName =(CSpStaticText)
    repeated.getDisplayField("stFieldName");
    CSpStaticText stCurrentValue =(CSpStaticText)
    repeated.getDisplayField("stCurrentValue");
    CSpStaticText stNewValue =(CSpStaticText)
    repeated.getDisplayField("stNewValue");
    CSpStaticText stUpdateType =(CSpStaticText)
    repeated.getDisplayField("stUpdateType");
    CSpStaticText stAuthorisers =(CSpStaticText)
    repeated.getDisplayField("stAuthorisers");
    int index = event.getRowIndex();
    Thanks
    Rao
    ----- Original Message -----
    From: "Yathiraju K" <yathiraj.kan@w...>
    Date: Friday, July 6, 2001 10:27 pm
    Subject: Re: [iPlanet-JATO] execution context
    Todd,
    Let me explain you this way. Suppose I set MaxdisplayTiles(150)
    and there
    are only 134 rows in the table. FirstTime it displays 134 rows.
    Now my requirement is that if I press next button, and since there
    are only
    134 rows, I want to display the same set of rows,
    i.e., 0-134 again on the click of next button. Now since the model is
    getting executed in an incremental approach,
    the no of rows returned are zero in the next web action. I wanted to
    override this incremental approach which is incorporated in
    the execution context as per my understanding( I suppose am not
    wrong).
    So I was trying to do setAutoRetrieveExecutionContext(context)
    with context
    being set to (0,9999) in beforeModelExecutes.
    I want to execute the model from the starting of the table again.
    And this
    is not working.
    Probably I should do this before calling super.beginDisplay().
    thanks,
    raju.
    ----- Original Message -----
    From: Todd Fast <toddwork@c...>
    Sent: Saturday, July 07, 2001 3:35 AM
    Subject: Re: [iPlanet-JATO] execution context
    Raju.--
    I think this is what you would expect with these settings, no? If you set
    maxDisplayTiles to 9999, but you only see 134 rows, there are no more rows
    to display when the next button is activated. There are only 134 rows in
    the result set. JATO assumes that if you tell it 9999 rows aredisplayable,
    and invoke a Next web action, the result set is larger than 9999 rows.> Otherwise, what's the Next web action for?
    Todd
    ----- Original Message -----
    From: "Yathiraju K" <yathiraj.kan@w...>
    Sent: Friday, July 06, 2001 8:51 AM
    Subject: [iPlanet-JATO] execution context
    I am working on a page which is bound to a model.
    I am setting maxdisplayTiles(9999) in the constructor.
    when it first retrieves the model while executing
    autoRetrievingModel, I
    am getting 134 rows. Thats fine.
    The page has the next button fucntionality. When next time it
    executesthe
    model, it is taking offset as 9999 and zero rows are returned.
    This has been noticed inspite of setting the following in the
    beforemodel
    executes.
    DatasetModelExecutionContextImpl context = newDatasetModelExecutionContextImpl(0,9999);
    setAutoRetrieveExecutionContext(context);
    any solution to this is very much appreciated.
    thanks,
    raju.
    [Non-text portions of this message have been removed]
    [email protected]
    [email protected]
    [email protected]

    Hi Rao,
    I assume the code is a part of the viewbean , say pgAViewBean. And
    pgAViewBean has a repeated field rB. In that case, the code can be migrated
    as below :
    String stFieldName = getRB().getStFieldName().stringValue();
    Similarly for other fields.
    int index = event.getRowIndex();
    can be migrated as
    int index = getTileIndex();
    Thanks,
    Subir.
    SNR R wrote:
    Hello
    We are migrating ND5 application into Iplanet. I am not getting
    any idea to migrate the following ND code into Iplanet.Could
    you please help me to fix problem.If anybody handled with repeated
    objects could you please send migrate code for the following
    ND CODE.
    CSpRepeated repeated =(CSpRepeated) event.getSource();
    CSpStaticText stFieldName =(CSpStaticText)
    repeated.getDisplayField("stFieldName");
    CSpStaticText stCurrentValue =(CSpStaticText)
    repeated.getDisplayField("stCurrentValue");
    CSpStaticText stNewValue =(CSpStaticText)
    repeated.getDisplayField("stNewValue");
    CSpStaticText stUpdateType =(CSpStaticText)
    repeated.getDisplayField("stUpdateType");
    CSpStaticText stAuthorisers =(CSpStaticText)
    repeated.getDisplayField("stAuthorisers");
    int index = event.getRowIndex();
    Thanks
    Rao
    ----- Original Message -----
    From: "Yathiraju K" <yathiraj.kan@w...>
    Date: Friday, July 6, 2001 10:27 pm
    Subject: Re: [iPlanet-JATO] execution context
    Todd,
    Let me explain you this way. Suppose I set MaxdisplayTiles(150)
    and there
    are only 134 rows in the table. FirstTime it displays 134 rows.
    Now my requirement is that if I press next button, and since there
    are only
    134 rows, I want to display the same set of rows,
    i.e., 0-134 again on the click of next button. Now since the model is
    getting executed in an incremental approach,
    the no of rows returned are zero in the next web action. I wanted to
    override this incremental approach which is incorporated in
    the execution context as per my understanding( I suppose am not
    wrong).
    So I was trying to do setAutoRetrieveExecutionContext(context)
    with context
    being set to (0,9999) in beforeModelExecutes.
    I want to execute the model from the starting of the table again.
    And this
    is not working.
    Probably I should do this before calling super.beginDisplay().
    thanks,
    raju.
    ----- Original Message -----
    From: Todd Fast <toddwork@c...>
    Sent: Saturday, July 07, 2001 3:35 AM
    Subject: Re: [iPlanet-JATO] execution context
    Raju.--
    I think this is what you would expect with these settings, no?If you set
    maxDisplayTiles to 9999, but you only see 134 rows, there are nomore rows
    to display when the next button is activated. There are only134 rows in
    the result set. JATO assumes that if you tell it 9999 rows aredisplayable,
    and invoke a Next web action, the result set is larger than 9999rows.> Otherwise, what's the Next web action for?
    Todd
    ----- Original Message -----
    From: "Yathiraju K" <yathiraj.kan@w...>
    Sent: Friday, July 06, 2001 8:51 AM
    Subject: [iPlanet-JATO] execution context
    I am working on a page which is bound to a model.
    I am setting maxdisplayTiles(9999) in the constructor.
    when it first retrieves the model while executing
    autoRetrievingModel, I
    am getting 134 rows. Thats fine.
    The page has the next button fucntionality. When next time it
    executesthe
    model, it is taking offset as 9999 and zero rows are returned.
    This has been noticed inspite of setting the following in the
    beforemodel
    executes.
    DatasetModelExecutionContextImpl context = newDatasetModelExecutionContextImpl(0,9999);
    setAutoRetrieveExecutionContext(context);
    any solution to this is very much appreciated.
    thanks,
    raju.
    [Non-text portions of this message have been removed]
    [email protected]
    [email protected]
    [email protected]
    [email protected]
    The Information contained and transmitted by this E-MAIL is proprietary to
    Wipro Limited and is intended for use only by the individual or entity to
    which
    it is addressed, and may contain information that is privileged, confidential
    or
    exempt from disclosure under applicable law. If this is a forwarded message,
    the content of this E-MAIL may not have been sent with the authority of the
    Company. If you are not the intended recipient, an agent of the intended
    recipient or a person responsible for delivering the information to the named
    recipient, you are notified that any use, distribution, transmission,
    printing,
    copying or dissemination of this information in any way or in any manner is
    strictly prohibited. If you have received this communication in error, please
    delete this mail & notify us immediately at mailadmin@w...
    [Non-text portions of this message have been removed]

  • Pls. explain these basics

    I want to configure net8 configuration assistant for a standalone computer of mine.
    But I couldn't understand these terms;
    1)tns service name?
    2)global database name?
    3)name of host?is it ip address:127.0.0.1 or computername or both or which?
    4)net service name?
    I could connect to internet using my computer-but no dns is required,uses tcp/ip
    protocol
    5)what is relation with listener name "LISTENER" and tns service name.Listener
    name can be anything I like?

    For a Standalone computer, ie..if the database is in the same machine you NO NEED TO CONFIGURE TNSNAMES.
    you can just connect as username/password.
    2)global database name?the name used to identify the database globally...ie typically some databasename.com.
    mostly global database name will be equal to database name.
    3)name of host?is it ip address:127.0.0.1 or computername or both or which?you can use both ip number or machinename. if the database is local, you can even just give LOCALHOST.
    4)net service name?TNS service name is aggregate name ,we give to identify the database somewhere in the network.
    it is a combination of databaseName + hostName + portnumber. or simply the host string.
    5)what is relation with listener name "LISTENER" and tns service name.Listener
    name can be anything I like? LISTENER is the default name of listener configured for a single database.
    If you have many databases in the same machine, you can have many listeners.
    the following is a sample TNSNAMES.ORA entry
    HIGH9I =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.4)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = high9i)
    where high9i=hoststring
    i have used the hostring same as database name.
    host = ur machine name /IP (for a remote database)
    = IP/LOCALHOST ( FOR A LOCAL DATABASE).
    I WOULD CONNECT TO THIS database like
    mag/mag@high9i.
    Is this helping you?

Maybe you are looking for