Could U recommand some swtichs....

I am gona buy workgroup switchs in 3days..I am confusing to choose ones.
The followings are required.
<<SWITCH 1>>
(packets switching over 38.7Mbps).
1.24ports.
2.FabricSwitch Bandwidth: 28Gbps
3.supporting 10/100/1000 Mbps Ethernet ports each(over 24 ports).
4.supporting 2GIBC ports( over 2 ports).
5. supporting 16MB Flash, 128MB DRAM.
6. Supporting Dynamic VLAN and Voice Vlan.
7. Supporting PVST+ and IGMPv3 snooping.
8. supporting Radius and TACACS+ Authentication.
<<SWITCH 2>>
(packets switching over 10.1Mbps).
1.48ports
2.FabricSwitch Bandwidth 13.6Gbps.
3. over 48 10/100 Ethernet ports
4. over 2 GIBC ports
5. 8MB Flash, 16MB DRAM
6. IEEE 802.1W(RSTP) and IEEE 802.1S(MSTP)
7. Supporting IEEE802.1x authentication.
8. Supporting traffic controling base on TCP&UDP and MAC.
Could U recommand me some switchs please........

hi
i would suggest to check out the data sheets of the different models to work out a conclusion on buying the switches for your org.
Would suggest to keep in mind about the future expansion and the growth you forsee now .
also refer this link which mite help u to get the details/data sheets of the different kinda switches..
http://cisco.com/en/US/products/hw/switches/index.html#products
regds

Similar Messages

While trying to convert pdf to word--keep getting message "an error occurred while trying to access the service" Could I get some help please?

Could I get some help with this?

Hi Shelly,
Are you trying to log in to ExportPDF from Reader? If so, please make sure that you have the most current version by choosing Help > Check for Updates in Reader. You should be using version 11.0.07 (Mac OS) or 11.0.08 (Windows)--earlier versions caused this sign-in error that you're seeing.
Let us know how it goes!
Best,
Sara

Firefox is slow to shutdown and therefore cannot open again for a few minutes or a restart.This is on 2 different PC's 1 running XP and the other Windows 7.Could you throw some light on this problem Thanks

Firefox is slow to shutdown and therefore cannot open again for a few minutes or a restart.This is on 2 different PC's 1 running XP and the other Windows 7.Could you throw some light on this problem Latest version running Thanks

Please see this article: [[Firefox hangs]]

"Installer could not install some files in "/". Contact the software manufacturer for assistance."

What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????

can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows 7. Could i have some advise in what is better for me, Bootcamp or parallels

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows . Could i have some advise in what is better for me, Bootcamp or Parallels

The Intuit rep said they don't "support" QuickbooksPremier on a "virtual machine." Do you know what I risk by using it, anyway? thanks for the advice about Boot Camp vs Parallels, BTW!
I use QuickBooks Pro for Mac, so I haven't had need to try any of the Windows versions in a VM. But I can't think why it wouldn't work. From within the VM, QuickBooks Premier would believe it is operating on PC hardware within Windows.
I would guess they mean that the multiple user support wouldn't work from within the VM. But I would think that would also work. Windows can see the Internet from within the VM, which means it can see your network. So if Windows can see the network, then QB Premier should be able to, too.
I know you can get Parallels as a demo, and maybe you could get QB Premier as trial software. So if you already have a retail copy of Windows to load into a VM, it would only cost you time to test what's possible.

System won't boot. Could really use some help here.

I have the K8T-Neo FISR2 mobo. When I set up the system, the SATA drive was set up as drive F: (onto which I installed Windows XP Home). I added a 2nd SATA drive later, and it became C:. Both drives are plugged into the Promise SATA ports. The system has been running fine for about a year now.
I was having a problem with a program not running properly. I stopped the process and tried to restart it, but it didn't work. It was a program that drives my Logitech gaming keyboard (with LCD screen). After I rebooted, the system would load windows, then after Windows was loaded, it would load up a program when I went into it and crash. It looked like it would crash on PXHELP.DLL (something like that). I booted up into safe mode, renamed the file so it wouldn't load, and now it won't boot at all. It starts to show the Windows logo and then instantly reboots. I can't even get into Safe Mode as it does the same thing.
I tried booting from an XP CD to do a repair, but when it boots, it doesn't see the hard drives. I downloaded the Promise drivers, put them onto a floppy, and load them as Windows is booting from the CD. It seems to load the drivers, but when I choose to do a repair (or even a new install), Windows comes back and tells me that I have no hard drives attached to the computer. I just can't seem to get Windows to see those hard drives!
I could really use some advice here......

Quote from: Tiresmoke on 04-January-06, 01:36:35
Try swapping the Drive Cables. You may have one that is not engaging as well as it should.
When I let the PC boot up like normal (without booting from the CD), it sees the drives and Windows tries to load, so I don't think it's the cables. I'll make sure they're reset, but I really don't think that's it.

Install error "could not install some modules:"

After I finsihed install I got some errors one was saying somthing exception related to Zip and then after second run I get
Warning - could not install some modules:
Core Modeling Library - The module named com.tomsawyer.module/1 was needed and not found.
Core Modeling Library - The module named org.antlr.module/1 was needed and not found.
I try to reinstall with the option "repair install" and after that I still get the same error.
by the way I installed both jdk and the ide. I have an older jdk still on my computer.

Thanks for response!
To start the Application Server, open a terminal
window
or command prompt and execute the following:
asadmin start-domain --verbose domain1 The comand window starts with C:\documents and settings\administrator, should I firstly change it to C:\ ? and how to change to C:\ ?
Or, on Windows, you can choose
Programs -> Sun Microsystems -> J2EE 1.4 SDK -> Start
Default Server No, in my Programs menue, there's no Sun Microsystems.
Says Starting and Stopping the Application Server
chapter of The J2EE 1.4 Tutorial:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
I browsed the tutorial, it doesn't provide such a trouble shooting.
Are you sure that you have application server
installed?Ths install procedure was successfully finished without any error message. Also, I can see J2EE is in my Control Pannel\ Add Remove\Program list.
What should I do? Thanks!
Jenny

Could someone post some sample soap for using the WS 2.0 api?

could someone post some sample soap for using the WS 2.0 api?
I need the actionheader as well. I don't care the object or the action, just need a sample...

You can throw a javax.xml.ws.soap.SOAPFaultException. https://jax-ws.dev.java.net/nonav/jax-ws-20-fcs/api/javax/xml/ws/soap/SOAPFaultException.html

SQL Developer will not start - could not install some modules

I just installed the Java JDK 7u51 as well as the JRE 7u51. Following that I extracted SQL Developer to a fresh directory. When I open SQL Developer I get the following error message:
Warning - could not install some modules:
JDeveloper/NetBeans Bridge - The module named oracle.ide was needed and not found.
Extensions Cache - The module named oracle.javaxide was needed and not found.
Extensions Cache - The module named oracle.ide was needed and not found.
Actions Bridge - The module named oracle.javatools was needed and not found.
Actions Bridge - The module named oracle.ide was needed and not found.
Any idea why I'm getting this message? I installed it on my laptop with no problem.

What is the directory structure under you SQLDeveloper directory?
Is should be something like tthe list below. If it isn't something has gone wrong with your extraction.
Directory of D:\progs\sqldeveloper-4.0.0.13.80-no-jre
18/01/2014 11:59 <DIR> .
18/01/2014 11:59 <DIR> ..
14/12/2013 10:41 <DIR> configuration
14/12/2013 10:32 <DIR> dataminer
14/12/2013 10:32 <DIR> dropins
14/12/2013 10:32 <DIR> dvt
14/12/2013 10:32 <DIR> equinox
14/12/2013 10:32 <DIR> external
10/12/2013 13:28 1,404 icon.png
14/12/2013 10:32 <DIR> ide
14/12/2013 10:32 <DIR> javavm
14/12/2013 10:32 <DIR> jdbc
14/12/2013 10:32 <DIR> jdev
14/12/2013 10:32 <DIR> jlib
14/12/2013 10:32 <DIR> jviews
14/12/2013 10:33 <DIR> modules
14/12/2013 10:33 <DIR> netbeans
14/12/2013 10:33 <DIR> rdbms
10/12/2013 13:28 23,580 readme.html
14/12/2013 10:33 <DIR> sleepycat
10/12/2013 13:28 835 sqlcli
10/12/2013 13:28 741 sqlcli.bat
14/12/2013 10:33 <DIR> sqldeveloper
10/12/2013 13:28 82,944 sqldeveloper.exe
10/12/2013 13:28 71 sqldeveloper.sh
14/12/2013 10:33 <DIR> sqlj
14/12/2013 10:33 <DIR> svnkit
03/12/2013 00:30 6,426 view-source-paths.lis

10.5.2 The Installer could not install some files in "/"

I have tried to upgrade my Inter Mac Mini Core Duo 1.66 to 10.5.2.
I ran the install through software update and proceeded through the 2 restarts. Once my mini restarted I checked "about my mac" to find that it still said the system was 10.5.1
I ran software update again to find that on trying to install i now get the message
Install Failed - The installer could not install some files in "/" please contact the software manufacturer for assistance.
I then tried the same with the combo updater and got the same message
I have tried to verfiy my disk or repaire permissions using disk utility for it to completely hang with the spinning beach ball and causes finder to crash.
I have also booted up with the leopard disk in and tried disk utility which says there are no problem with the disk but disk utility in leopard still hangs
Can anyone help??
Is anyone getting the same problem?
Thanks

I'm having the same problem installing the Leopard Graphics Update on my Dual 2.5 G5. Installing 10.5.2 went fine, but afterwards the graphics update would fail to install, with the same error message you got. I tried both Software Update and downloading the standalone installer.
But wait, there's more! I also can no longer repair permissions using Disk Utility. I get the following message: "Error: The underlying task reported failure on exit." Booting from my Leopard install CD does allow me to fix permissions.
Lastly, my second internal hard drive is now also behaving oddly, Any time I try to drag a file to the Trash, I get a dialog box telling me: "The item "(file name)" will be deleted immediately. Are you sure you want to continue?"
I've run DiskWarrior from the CD and tried fsck in Single User mode (no errors found). Nothing seems to help
I had no problem updating to 10.5.2 on my MacBook, but the update to my desktop has been a real booger. Anyone who can offer any input, I'd sure appreciate it.

I was wondering if anyone could tell me some cool software modifications that I can do to my Macbook pro

I was wondering if anyone could tell me some cool software modifications that I can do to my Macbook pro

That a very broad question not knowing anything about you. It's like me asking you what car should I get. In any case you know what google is. Google, "software modifications for mac" and see what comes up. Then you can pick and choose what you like.

WebAssist Cart help? I know it's off topic but... Could really use some help...

I've got a shopping cart that is working and I'm trying to update the
quantities in inventory by subtracting the quantity ordered from the total
inventory in a table called ITEMS.
I can update a record after a sale in the cart, but right now it is
updating by completely replacing the value of the items in inventory with
the quantity in the checkout cart. So, if there are 800 items, after the
update, there are -1 total in inventory, not 799.
The problem is that I don't know how to coordinate the item(s) in the stored
shopping cart with a call to their ID and quantity in the online database.
Here's what I have so far:

Ahhhhhhhh Jeff... If I can get this going... I spent days looking for this solution. Thank you very much. Just bought Dreamweaver CS3 and am battling through the bells and whistles. Liz ----- Original Message ----- From: "jefferis" <[email protected]> To: <[email protected]> Sent: Tuesday, June 19, 2007 9:50 AM Subject: Re: WebAssist Cart help? I know it's off topic but... Could really use some help... >A new message was posted by jefferis in > > ADDT - PHP Application Development -- > WebAssist Cart help? I know it's off topic but... Could really use some > help... > > On 6/16/07 3:06 PM, in article [email protected], > "[email protected]" <[email protected]> wrote: > >> Hi jefferis.... >> >> How did you solve the problem? >> I am having the same problem trying to incorporate an inventory code into >> a >> shopping cart that will deduct the number of items purchased from my >> total >> inventory to let me and my customers know how many items I have remaining >> in >> stock. >> >> Ex: >> inventory: 500 plants >> purchased: 20 plants >> remaining inventory: 480 plants > > Yes I did. > > I've been struggling with this piece of pie for about 5 days and > thought it might benefit others, so here's a way to update your quantities > in INVENTORY after a checkout success. I read another thread but found it > way too complex and depended on holding inventory in the session: > http://www.webassist.com/professional/support/kbcompletethread.asp?DiscID=33 > 046 > But you may lose the info when you go offsite to Paypal, e.g., to complete > the transaction. > > Here's my approach using the "checkout_success.php" page. Using this page > works because user arrives here ONLY after a successful purchase. > First of all, I used the BSM php sample store as a starting point. I > added > an ItemQuantity field to the items DB to track the stock or items in > inventory in the store. > > In order for this automatic deduction of sold items to work, it must be > placed within the do while { area of the display page for the cart's > items. } The code is commented below: > > <?php > //WA eCart Show If Start > if (!$eCart->IsEmpty()) { // IF CART NOT EMPTY... > ?> > <h2>Order Receipt </h2> // STANDARD STUFF TILL NEXT COMMENT > > <h3 class="eCart_OrderHeaderInfo">Order number: <?php echo > session_id(); > ?></h3> > > This is your order receipt. Please > make > a copy for your records. An email will also be sent to you. > <table class="eC_ShoppingCart" border="0" cellspacing="0" > cellpadding="0"> > <tr> > > <th>Name</th> > > > <th>Price</th> > > > <th class="eC_FormItem" >Quantity</th> > > > <th>Total</th> > </tr> > <?php > while (!$eCart->EOF()) { // DO WHILE FOR EACH ITEM IN CART > ?> > <tr> > > <td><img src="/images/thumbs/<?php echo > $eCart->DisplayInfo("Thumbnail"); ?>" alt="" width="100" height="100" > class="eC_ProductThumb" /> > <?php echo > $eCart->DisplayInfo("Name"); ?> > <?php echo > $eCart->DisplayInfo("Description"); ?> <p > class="eC_ItemDescription"><?php echo $eCart->DisplayInfo("ID"); > $idCall = $eCart->DisplayInfo("ID");?>> // CREATE A VARIABLE FOR > //THE ITEM's ID NUMBER in the DB > //USE DISPLAY ID TO GET ID # and make it = $idCall > </td > <td class="eC_PriceItem" ><?php echo > WA_eCart_DisplayMoney($eCart, $eCart->DisplayInfo("Price")); ?></td> > > > <td class="eC_FormItem" ><?php echo > $eCart->DisplayInfo("Quantity"); > $solditems = $eCart->DisplayInfo("Quantity");?> //DO THE SAME FOR > QUANTITY > //SOLD, MAKE QUANTITY SOLD = $solditems > </td> > > // NOW UPDATE THE DATABASE. SUBTRACT $solditems from ItemQuantity ( YOUR > //INVENTORY OR STOCK) > //FOR EACH ITEM IN CART. SELECT the item's ID by $idCall: > <?php > mysql_select_db($database_connBSM, $connBSM); > $query_itemQ = "Update items SET items.ItemQuantity = > items.ItemQuantity - > $solditems WHERE items.ItemID = $idCall"; > $itemQ = mysql_query($query_itemQ, $connBSM) or die(mysql_error()); > > ?> > <td class="eC_PriceItem" ><?php echo > WA_eCart_DisplayMoney($eCart, $eCart->DisplayInfo("TotalPrice")); ?> </td> > </tr> > <?php > $eCart->MoveNext(); //// REPEATS BEHAVIOR FOR EACH ITEM IN CART > } > $eCart->MoveFirst(); > ?> > BTW, once the items in inventory = 0, the items do not appear in the > catalog. That is set in the catalog page's recordset. > Jeff > ~~~~~~~~~~~~ > Jefferis Peterson, Pres. > Web Design and Marketing > http://www.PetersonSales.com > > > > > ------------------------------------------------------ > View/reply at <<a href="/cgi-bin/webx?13@@.3bc3e9d6/5">jefferis, "WebAssist Cart help? I know it's off topic but... Could really use some help..." #6, 19 Jun 2007 6:50 am</a>> > You must visit the conference to reply. Email replies are not allowed and > will be returned. > Use the unsubscribe form at > <a href=http://www.adobeforums.com/cgi-bin/webx?280@@.3bc3e9d6!folder=.3bc3909c> > to cancel your email subscription.

I think my iMac is infected and could really use some help

I recently purchased an iMac for the 1st time and am having many pop ups, survey requests and emails sent from my account to people in my address book. I used the chat help that came up on the Apple support which was a 3rd party who did a diagnostic check on my computer. They told me my computer was infected and wanted to charge me $159 to fix it. I could really use some suggestions. I have heard that apple computers don't get infected but it appears mine did.

No infections. These are all scams you can ignore. I suggest that you enable your browser's pop-up blocker which will help with some of these annoyances. For more extensive preventions I recommend GlimmerBlocker.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

When i try to re download apps for macs, it saws sign in for purchase history then nothing happens. i could really use some help. thank you

when i try to re download apps for macs, it saws sign in for purchase history then nothing happens. i could really use some help. thank you

Hi,
You've come across a MAS bug.
Install the v10.6.7 combo update here.
Restart your Mac after the update is installed.
Instructions for re downloading apps here.
Carolyn

Do i need 3g,4g,wifi to send sms/call somebody ? I could really use some help.

do i need 3g,4g,wifi to send sms/call somebody ? I could really use some help.

No, Standard Calls and text messages (SMS) only require the normal Phone service.
You can turn off 3G/4G/LTE and Wifi and still be able to get and make calls and send and receive sms.

Could U recommand some swtichs....

Similar Messages

Maybe you are looking for