Could we have some clarification on the linear cha...

Who will be able to get them?
Can people without infinity get them and are we certain that an updated black box will be able to view them?

masona2 wrote:
If you want to go elsewhere, go elsewhere, you have no need to declare such on here. That is a matter for you and you alone.
And as for your declaration " I want to know specifically what will be required for those channels." Your not wanting to know, you are demanding to know. But BT never announce anything until such is ready. They never have and they never will. But if your not happy with that stance, the grass is always greener, eh?
I am beginning to wonder if BT know. That's what worries me.
By the way, you told me to start this thread so why complain when I do?

Similar Messages

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows 7. Could i have some advise in what is better for me, Bootcamp or parallels

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows . Could i have some advise in what is better for me, Bootcamp or Parallels

The Intuit rep said they don't "support" QuickbooksPremier on a "virtual machine." Do you know what I risk by using it, anyway? thanks for the advice about Boot Camp vs Parallels, BTW!
I use QuickBooks Pro for Mac, so I haven't had need to try any of the Windows versions in a VM. But I can't think why it wouldn't work. From within the VM, QuickBooks Premier would believe it is operating on PC hardware within Windows.
I would guess they mean that the multiple user support wouldn't work from within the VM. But I would think that would also work. Windows can see the Internet from within the VM, which means it can see your network. So if Windows can see the network, then QB Premier should be able to, too.
I know you can get Parallels as a demo, and maybe you could get QB Premier as trial software. So if you already have a retail copy of Windows to load into a VM, it would only cost you time to test what's possible.

I have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

i have some presentation on the ipad 2 which went missing even though it is still on the icloud. how do i load them onto the ipad again? I have already updated the keynote and am currently on ios8

Here you go:
You should be able to hit the "Agree" button, if you are on an iPhone right now. On a Mac, you should just left click the button where it said "Accept". I hope this helped.
To quit the app store, simply hit these keys:
Than, you should come up with this window:
Select the app store with:
a) The up and down arrow keys
b) Your cursor
Than hit the 'Enter' button twice. This should close the app store. The force quit window is also accesible through the apple logo in the top left corner of the screen. It should say:
Force Quit...

Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

Hi Tech5Apple,
Thanks for visiting Apple Support Communities.
If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy

I have some trouble With the graph XY, if I display a curve and try to zoom on it, it may be corrupted, or may disappeared.

In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
Does anybody have seen that kind of trouble ?

> I have some trouble With the graph XY, if I display a curve and try to
> zoom on it, it may be corrupted, or may disappeared.
>
I think what you are describing is not due to video driver, but rather
to the way the graph works. The LV graph maps points to integer screen
coordinates and draws lines be tween those point. When the numbers are
way to large to fit on the screen, the numbers are pinned to a special
large value. When this happenson one axis but not the other, it causes
the slope of the line to change and potentially not cross the screen.
If this is the same effect I'm describing, it only takes place when you
zoom into the data by a large extent, pushing the other points about ten
to fifteen monitors away. At this point you are no longer
looking at
measured data, but rather just on the interpolation of a line between
two points. The solution if you must have one is to resample your data
on the diagram to contain more points.
Greg McKaskle

How to have some fields in the header of the report

Hi All,
we would like to have some fields in the header of the report (every page but the first page), but Word won’t let you insert fields into the header. Are there any work arounds to do something like that?
Thanks,
Vandana

'Insert Menu -> Field' does not work for headers.
Try this. Say if you want to insert a XML tag named TRX_NUMBER in header. Put <?TRX_NUMBER?> in the header. This will display TRX_NUMBER tag in header.

Hi, in my asus memo pad hd 7 i have some problems whit the videos, they run but whit many stripes in image

hi, in my asus memo pad hd 7 i have some problems whit the videos, they run but whit many stripes in image.
what can a i do?
the firefox is apdated.
thank you

Thank you for the update, the fix will be in the release version of Firefox on 2015-02-24.
In the mean time if you want to continue using Firefox beta our Sync service may be helpful getting your Firefox release data into Firefox beta. https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

Just needed some clarification regarding the Viewer Builder and actually publishing your App...

If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!

Hi Joshua,
When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
With kind regards,
Klaasjan Tukker
Adobe Systems

Hi!!I have some problems with the synchronization of my system, and I don´t know how I can solve this!

My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
Graci

I think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

Have some doubt regarding the weblog (Lookup's in XI made simpler)

Hi All,
I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
I am having a file-file scenario where I need to do lookup in database(MS-Access) through mapping.
The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I have also created the receiver agreement for the same in the cofiguration.
While creating the receiver agreement you have to specify the interface name which includes the message typeI have specified the normal format which we specify while configuring the jdbc receiver adapter.
In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
I have also specified the select query to be executed in the mapping program.
While testing I am getting the following error
Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
<b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
Thanks and Regards
Rahul

Hi,
Following is my user defined function
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select URole from Lookup where UName = ' " + UName[0] + " ' and UPassword = ' " + Pwd[0] +" ' ";
try{
channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("URole"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
Thanks and Regards
Rahul

Could someone post some screenshots of the Apple store app?

Would someone with an iPhone/iPod touch please be kind enough to post some screenshots of the Apple Store app.
I've been googling for some screenshots, but only a limited selection are available and they are not at actual size.
Here are the screens I need:
Main front screen
Product Page (if possible of more than one product)
Photogallery on a product page
Information section on a product page
Category page
If possible, if the full content of each page could be posted.
The Apple store app no longer works on my iPod touch, otherwise I could do it myself.
Thanks for any help that can be offered.
Or if anyone knows how I can access the Apple store content on a desktop, that would be even better. I still need to see all the content in mobile screen size format, but it might be possible to resize my browser to emulate this?

Try downloading and reinstalling the Mac OS X 10.6.8 Update Combo v1.1 updater. It just may reinstall App Store for you.

Hello: I have a question I have some how hidden the itune toolbar while downloading my CD's. Help me with showing the itune toolbar so I may complete downloading info from my CD's. Thanks very much. Martha

Hello:
While dowloading CD's on ITUNES   I some how hide the toolbar at the top of this ITUNE program
Need assistance with viewing or the toolbar showing to continue downloading CD's
Thank you
Martha Dorsey

No this does not help.
I need more help. I am trying to see the MAIN page/view   for ITUNE    to be able to
download CD's; the page with all the different -- tabs at the top ( Music        Songs Album     Playlist    (etc)
I am not able to return to this page     with downloading my CD's and naming a new playlist???/
I need HELP!!??
Martha Dorsey

I have some questions about the ios 7.1 security -what if they replace the sim ?

i khnow now that with the new ios 7 no one ever can format the iphone with itunes if the find my iphone is on in the iphone
but
1-what if they remove the sim and put a new sim?
can i still be able to track it with icloud and send messages to it and play sound and lock it with a passcode even if they remove the sim
2-what if they using an old version of itunes will they be able to format it as new iphone?
please answer each question both of them
i have iphone 4s with the latest ios 7.1

1-what if they remove the sim and put a new sim?
can i still be able to track it with icloud and send messages to it and play sound and lock it with a passcode even if they remove the sim
As I said, if there is a passcode in place they do not know, you will be able to track down the device, irrespective the SIM card they are using. By the way, if the device is locked, they should first unlock it in order to make their SIM work, calling the carrier and giving all your personal data they do not have.
On the other hand, if the phone is unlocked and does not have any passcode, then yes, they will be able to use any SIM with it and turn off any tracking software.
2-what if they using an old version of itunes will they be able to format it as new iphone?
Same as in previous: if they have the iPhone without any lock then yes, they will be able to restore it as a new phone.
Follow all the instructions here: http://support.apple.com/kb/HT5818 in order to turn on Activation Lock and make more difficult for them to restore your phone without permission.

A new Mac user on an older MacBook. I have some how changed the size of the typeface that appears on web pages. I have gone through and looked under preferences and reset everything that i could find but this still dosent work.

I will try to describe things better. When I pull up a web page (in firefox or safari) the type face in the columns is larger than it should be. This results in the columns spreading to a second line and rearragning the rest of the page.

View / Customise Toolbar
Drag the 'Zoom' to the toolbar.

Could we have some clarification on the linear cha...

Similar Messages

Maybe you are looking for