Could WM setup same location in different storage location type ?

Hi
  Now we have same part  but which is bought from different vendor by currency RMB or USD.
We hope when we receive material,  it will receive material by currency into different storage locatio type , Or Could we use mb1b to move mateiral in different storage location type ?
If there is any advice, please tell me , Thanks
Thanks
Alice

Hi, Expert
Really appreciated for your help. Currently for same part, we possibily buy it by different currency . Somteimes it's RMB, sometimes it's USD.
We use migo to receive these mateirals , most are in WM module, Some in IM module.  Currently, when we receive po, in stock, we only track the qty. but now we hope to find a way if we also could mark the currrency on the same materails. 
  To provide matierals to production , we still need place the material in on location. Since when we delivery material /componet, we don't care its currency.
So we think if in WM, we could use different storage locaiton type for one location and seperated by different currency ?
Thanks
alice

Similar Messages

  • QM/MM: Stock transfer from QI to QI in different storage location

    Hi Gurus,
    I want to transfer a QI stock to QI stock in the same plant but different storage location using MB1B – 323 movements. But it has got QM status active. So without taking usage decision it doesn't allow us to move the stock. It needs a special inspection type which allow this transaction.
    I don’t want to create another inspection lot and don’t want usage decision.
    Can anyone suggest me the solution?
    Thanks
    Shiv

    Hi Laxman,
    Thanks again for your suggestion to use QAC2.
    Is there any way of of scapping the same stock stock having inspection lot , status QI w/o UD?
    Thanks
    Shiv

  • Sales order same plant different storage location

    Hi
         We are doing a sale order for a material that is storage in two storage location.
    Storage location A:
    2 units
    Storage location B:
    3 units
    We did a sale order for 5 material. Stock availability asigned 5 unit in one position of the purchase order. Then the system create just one delivery for 2 units.
    Which procedure or customizing we have to do to get two deliveries, one for each storage location.
    Thanks in advance for the help
    Regards
    Enzo

    thanks SAJU SOM
    We need to create two deliveries from one sales order, that have quantities for differents storage locations.
    Example:
    Sales order A: 5 units
    We have, 2 in storage location C and 3 in storage location D under same plant. The storages locations are in differents places, so we need two deliveries, one from C and the other one from D.
    I suppose that this situation is normal and occurs in many companies.
    So, we have to create a sales order with 2 positions, or the system split the deliveries during deliveries creation?
    I think the system should split the positions automatically in the sales order creation.
    Thanks for your help
    Regards
    Enzo

  • Picking quantity from a different storage location during batch split??

    Hi Gurus,
    Have an issue with doing batch split in a delivery with batches from several storage locations.
    Have delivery XXXXXX where I want to pick batches from several different storage locations.
    I click on the batch split button and select the different batches and quantitys.
    The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
    The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
    My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
    The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
    Thank You for all Your help!
    BR,
    Christian

    Hi Christian,
    you have not jet got an answer  -- here my suggestion.
    You have to use the Userexit Mv50afz1. Here you can do some checks and  you can do a popup, where you can sign the LGORT, where the batch is.
    In any case, you need an ABAPer
    In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
    In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
    But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
    If nessesary create an ylips- Line of the position.
    Use an assign-command to avoid the change of the index.
    hans

  • Movement type for blocking to a different storage location

    Hi Gurus,
    Is there any movement type by which the stock should move to blocked from unrestricted but to a different storage location. In the mvt type 344, the stock moves from unres to blocked but it is in the same location.
    Regards,
    Kumar

    Hi Kumar,
    344-Transfer posting blocked stock to unr.-use stock - reversal, is reversal of 343-Transfer posting blocked stock to unrestricted-use stock that TP Block to TP unrestricted.
    Better use 343 for transfer posting from Block to Unrestricted.
    If the reciveing storage location is not avliable while TP with 343 then goto OMJJ enter 343 movement enter , duble clikc on
    Field selection (from 201)/Batch search procedure and then goto Details(Lens) and then in the Select group double click on "Transfer Postings" and then make receiving storage location as req/opt entry and save.
    Then try do to TP for different storcge location for same plant with 343.

  • Stock transfer between 2 different storage location

    Hello ,
    Is anybody can help ? We have below scenario :
    Plant : P1 P2
    WH  :   W1 (W1 cross 2 different plants P1 and P2)
    Storage Location : S1 S2 under W1
    We want MRP can trigger the replenishment between 2 different storage location within same warehouse
    but the warehouse is cross 2 plants
    Thanks !

    Dear Denny,
    Pls. maintain following setting which will fulfill your requirement :
    Go to Material Master -> MRP-2 View -> Special procurement type
    40     Stock transfer (proc.from alter.plant)
    Try above & revert in case any doubt.
    Hope this helps.
    Regards,
    Tejas

  • Automatic selection of products in a plant but differant storage locations

    Hi Gurus
    Here is a requierment from our client that is they maintain differant storage locations based on differant prices however they want automatic selection of products during sales order entry, based on manufacturing date like FIFO comparing differant storage locations with in a plant. if you have come across these scenario and other solutions relate to this
    please share your experiance
    with regards
    Baalakrushnan.da

    hello, friend.
    yes, we have come across this.  first, your material should be batch managed specifying FIFO.  then, inventory/availability search should be plant level instead of storage location level.
    i will try to get back to you with the specifics.  but in the meantime, you could probably get your MM consultant to help you with this.
    regards.

  • Different Storage Location required for RGA

    Hi,
    My requirement is that whenever Returns is done for SO, different Storage location should default, which is currently not happening.
    For ex - Standard Storage location(0001) is determined whenever SO is created but we want that different storage location(say 0096 which is created for Returns) should be determined whenever Returns is created.
    For these I have made the following config settings :
    Defined 1000(Shipping Point Std) which is assigned to Plant(BPX1)
    Also 1100(Shipping Point for Returns) is assigned to Plant(BPX1)
    Storage loc (0001- std) is assigned to Plant(BPX1) and warehouse no (BP1)
    Storage loc (0096 - for Returns) is assigned to Plant(BPX1) and Warehouse no (BP1)
    In OVL3 following settings done:
    Shipping Point (1000) , Plant (BPX1) than storage loc - 0001(Std)
    Shipping Point (1100) , Plant (BPX1) than storage loc - 0096(Returns)
    Still when we are creating returns storage loc 0001 is defaulting in Returns and NOT 0096 (Which is my requirement).
    Kindly advise which config settings are still missing to determine 0096 storage loc in RGA.
    Thanks in advance

    Hi,
    I have ticked the Plant and movement type in OMJ8, but still same storage location is coming while posting the Returns.
    Thanks

  • One SO but I would like Post Goods Issue from different Storage Locations?

    Dear All,
    Pls help me solve this issue below:
    I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
    E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
    - U1 can Post Goods Issue from storage location A only (but cannot from B, C)
    - U2 can Post Goods Issue from storage location B only (but cannot from A, C)
    - U3 can Post Goods Issue from storage location C only (but cannot from A, B)
    How can I assign the Authorization for users?
    How can I create Outbound Delivery:
    a. 1 SO --> 1 outbound delivery --> Post GI 3 times
    b. 1 SO --> 3 outbound delivery --> Post GI
    Thank you very much for your support
    Cao Huy.

    Hi Senthils,
    Pls see my comment below:
    For Authorization check for storage Location
    1. GO to the following Menu path
    Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
    Here you have activate authorization tick for storage location and plant combination.
    --> Done
    2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
    for each user.
    --> Done
    There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
    How can user 01 Post GI from only location A in this outbound???
    And then user 02 will Post GI from only location B in this outbound,
    user 03 will Post GI from only location C in this outbound.
    Thanks
    Cao Huy

  • How to run MRP on different storage location level ?

    Dear Experts,
    Need your valuable guidance to solve the below requirement form the client-
    1) My client want to enter a "safety stock level" for one spare part/ Material on the basis of individual storage locations.
               For sake of example: in SL01 he wants the safety stock for particular material set to 5
                                  In FS18 he wants the safety stock set to 2
                                  In FS15 he wants the safety stock set to 1
    Kindly tell me whether it is possible? & guide me how to do it.
    2) Also tell me how to run MRP on a storage location level?
               This is because after maintaining different safety stocks for one material in different storage locations,  is it possible to appear each storage location with their differing safety stock levels?
    I checked the MRP type maintained & its-1 (plant) & not as- 2 (storage location).
    Kindly guide me for the above issue
    Thanks in advance for your support.
    Regards,
    Mehul

    Hi Umashanker,
    Thanks for your suggession . Accordingly I have resolved the issue.
    Regards,
    Mehul

  • Stock transfer between Plant/Storage location to Plant/Storage location

    Dear Experts,
    This is a MM component of SAP Retail.
    We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
    To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
    When we run replenishment  planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
    I do see the following set up in SPRO and I have done the following.
    Step1: Activate Stock Transfer between Storage Locations
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
    Step2: Assign Delivery Type and checking rule according to storage
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
    Step3: Define Shipping Data for Stock Transfer between Storage Locations
    SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations

    Step4: Define Rule for Determination off Shipping Point
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
    Step5: Shipping Point Assignment According to Storage Location
    SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
    Question.No:1- After completing the above set up  in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
    Question.No:2
    I do see the following setting.
    Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
    Display the IMPLEMENTATION
    Double click on the method GET_SUPPLYING_SL
    Click the Execute button
    Click the detail button on IF_EX_MD_EXT_SUP
    Execute GET_SUPPLYING_SL
    There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
    Kindly provide your inputs.
    Thanks,
    Vasanthan

    Dear,
    Have You configure MRP in second plant (where you want to transport the Material).
    Please try with this and do again Po for stock transport.
    Regards
    Piyush Patel

  • Move all materials in a storage location to another storage location

    Hi,
    is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
    Regards

    is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
    There is no t code for  automatic goods movement.
    Have to do manually with t code: MB1B or LSMW

  • Stock valuation different for different storage location in same plant

    Hi SAP Gurus,
    Please provide me a detailed idea and solution for this.
    My client has simulated several transactions in MM.
    Say it has two storage location 1110 and 1120 under plant 1100
    Now in 1120 there are stock movements pertaing to a project (includes stock transafers from 1110 and issues made to project)
    Finally, the MB52 report is showing valuation of stock (unrestricted) at different rates for 1110 and 1120.
    My client is raising issue, saying the value should be same for stock under a single plant as valuation is done at plant level.
    Also, both the stock is under unrestricted category, so valuation should be same.
    What could be the issue?
    Any solution?
    The auditors will raise issue over this.
    Please help ASAP.
    Regards,
    Sumit

    Hi Sumit,
    In valuation using the moving average price (price control u201CVu201D), the system valuates goods receipts with the purchase order price and goods issues with the current moving average price.
    So, for Plant 1110 the rate could be the PO price used for procuring the material whereas for Plant 1120, it is the moving average price and hence the difference in rates.
    However the auditors would look after the Material Valuation at the Valuation Area level which is the Plant.
    Thanks,
    Ankur

  • Different storage location automatically pick for same material code

    Hi,
    As per my requirement,
    We have two storage locations i.e Return Location and Finished Location and single plant and single shipping point.
    At the time of Normal delivery system should be automatic picked Finished Location and return delivery system have to pick Return Location only.
    I tried to do Storage location determination but system is not picking correct location. Kindly guide me.
    Thank You!
    Chakradhara

    Check this thread
    Creation of return order with ref to an Invoice
    G. Lakshmipathi

  • Has anyone picked materials from one storage location but confirmed TO to different storage location?

    The business does not want to use MRP areas to segregate materials between service part and production. What they want to do is separate service parts on deliveries at our shipping storage types (915/916) from MRP view. This requirement is primarily for our international shipping area. We may pick parts for an international shipment and the parts will sit on the delivery - not goods issued because we don't want to invoice - for up to 3 months. During that time, MRP sees the inventory so replenishment is not done in a timely fashion or parts may get stolen from the shipment for a production requirement because the inventory is seen.
    Could one solution be to create a non-MRP relevant storage location (say 1200) and place the shipping storage types in this storage location?  Then when the transfer order creates, the system would show the source to be from the MRP relevant SLoc (1100), stype (130), bin (A-01-A), - these are examples - with the destination to be to non-MRP relevant SLoc 1200, stype 915, bin (dynamic using the delivery number) 0080745298? Has anyone had this type of request or know of a way to satisfy the business requirements without different MRP areas? They also do not want to have two transfer orders - one with a 601 movement and one with a 311 movement.
    Any known solutions or outside-the-box thinking would greatly appreciated.
    Marla

    I don't have the solution, just some critical questions and hints
    Even a non-MRP relevant storage location can be warehouse managed.
    The stock is shown in any stock list as long it is not goods issued, no matter if it is stored in a
    non-MRP relevant storage location.
    Stock that is picked for a delivery is not available for others, it is reserved. A delivery is a MRP element and hence should be taken into consideration in the planning run.
    A non-MRP relevant storage location will only solve your planning issues if you move the material there if it is not yet picked  and allocated to a delivery.
    Do your thieves really use SAP to check if the stock is there, or do they just see the stock in the warehouse? As said, the non-MRP relevant storage location will not solve this issue since the stock is still visible.

Maybe you are looking for